Synchronous determination of mercury (II) and copper (II) based on quantum dots-multilayer film

A sensitive sensor for mercury (II) and copper (II) synchronous detection was established via the changed photoluminescence of CdTe quantum dots (QDs) multilayer films in this work. QDs were deposited on the quartz slides to form QDs-multilayer films by electrostatic interactions with poly(dimethyldiallyl ammonium chloride) (PDDA). Hg²⁺ or Cu²⁺ could quench the photoluminescence of the QDs-multilayer films, and glutathione (GSH) was used to remove Hg²⁺ or Cu²⁺ from QDs-multilayer films due to strong affinity of GSH-metal ions, which resulted in the recovered photoluminescence of QDs-multilayer films. There are good linear relationships between the metal ions concentration and the photoluminescence intensity of QDs in the quenched and recovered process. It was found that the Stern–Volmer constants for Hg²⁺ are higher than that for Cu²⁺. Based on different quenching and recovery constant between Hg²⁺ and Cu²⁺, the synchronous detection of Hg²⁺ and Cu²⁺ can be achieved. The linear ranges of this assay were obtained from 0.005 to 0.5 μM for Hg²⁺ and from 0.01 to 1 μM for Cu²⁺, respectively. And the artificial water samples were determined by this method with satisfactory results, the recoveries for Hg²⁺ and Cu²⁺ ions were found in the range of 90.4–106.4%. To the best of our knowledge, it is the first report about the synchronous detection of Hg²⁺ and Cu²⁺ by using quenched and recovered photoluminescence of quantum dots multilayer films.     

Copper(II) complexing with 2′,2′-diethylheptanohydrazide

Acid-base properties of 2′,2′-diethylheptanohydrazide (DEHH) and its complex formation with copper(II) ions in water-isopropanol solutions were studied. Cationic complexes with [Cu²⁺] : [DEHH] ratios of 1 : 1 and 1 : 2 were found to be formed in weak acid media, and an uncharged complex with a [Cu²⁺] : [DEHH] ratio of 1 : 2 was found to be formed in a basic medium. log K _st values were determined. The data obtained were compared with the stability constants of copper(II) 2′,2′-diethylbenzohydrazide complexes.     

Near-Infrared Fluorimetric Determination of Copper(Ⅱ) Ions Using CdHgTe Nanorods as Probe

Stable water‐soluble CdHgTe nanorods with an emission wavelength at 722 nm, obtained by doping Hg²⁺ into CdTe nanorods, has been used as a near‐infrared region (NIR) probe to investigate their interaction with copper(II) ions. A new fluorimetric method for the determination of copper(II) ions has been developed based on the quenching effect of copper(II) ions on the emission of CdHgTe nanorods. The mechanism studies show that an effective electron transfer from nanorods to the copper(II) ions occurred based on the coordination reaction between copper(II) ions and the carboxyl groups on the nanorods surface, which could be responsible for the emission quenching of CdHgTe nanorods. Under optimum conditions, the linear range of the calibration curve for the determination of Cu²⁺ is from 8.0×10^?9 to 1.0×10^?6 mol/L and the detection limit is 2.0×10^?9 mol/L. Owing to low background interference of NIR measurement, the proposed method displays relative high sensitivity and selectivity. Especially, some physiologically important cations almost do not interfere with the determination of Cu²⁺. The proposed method was also applied to the determination of trace Cu²⁺ in real aqueous samples with satisfactory results.     

The formation of metal nanoparticles in polyacrylic acid-polyethyleneimine complex upon reduction of copper(II) ions using X-ray irradiation

The features of nanoparticle formation by the radiation-chemical reduction of Cu²⁺ ions in polyacrylic acid-polyethyleneimine complexes have been studied. It has been shown that the swollen film/aqueous alcohol medium interphase exchange of the reducing species and the specifics of X-ray energy transfer play an important role in the formation of metal particles in the subsurface layer of polymer matrixes. An analysis of EPR and X-ray diffraction data shows that an acetaldehyde admixture increases the Cu²⁺ reduction rate of and enables the growth of nanoparticles.     

Selective extraction and concentration of dispersed copper from dilute solutions of copper and zinc ions with weakly basic aminoanionites

The possibility of selective extraction and multiple concentration of copper in the form of ultrafine precipitate from dilute Cu²⁺-Zn²⁺ solutions by using a suitable sorbent and an effective mode of its regeneration was demonstrated. The extraction was performed in the dynamic mode in column-type reactors filled with an aminoanionite as a selective complexing sorbent, the regeneration of which was conducted by chemical reduction of Cu²⁺ in the ionite after its saturation. It was established that saturation-reduction cycles repeated many times result in the accumulation of metallic copper at the surface and in the bulk of the sorbent. The mechanism of the process includes the formation of complexes of copper and zinc with amino groups of the ionite and the subsequent displacement of Zn²⁺ ions from the anionite due to its higher affinity to Cu²⁺ ions followed by the conversion of Cu²⁺ ions to an unsorbable form (dispersed metallic copper). It was demonstrated that the presence of dispersed copper stimulates the additional sorption of Cu²⁺ ions via redox conproportionation. This method makes it possible to obtain a degree of concentration of copper ions in three cycles >300% higher than that attainable in the purely ion-exchange mode (without chemical reduction).     

Synthesis and properties of Cu–Pd hydrosol: Hydrogen reduction of Cu<Superscript>2+</Superscript> ions catalyzed by palladium nanoparticles

A method has been developed for obtaining Cu–Pd hydrosols via catalytic reduction of copper ions by hydrogen on seed palladium nanoparticles 2.5 ± 0.3 nm in size. It has been found that reduction of Cu²⁺ to metal proceeds stage-by-stage through the formation of an intermediate Cu⁺ ion. Cu–Pd hydrosol remains stable with respect to sedimentation and aggregation for several weeks. The hydrodynamic size of Cu–Pd nanoparticles increases proportionally to the copper content in particles. It has been shown that this is due to an acidification of the solution as a result of H⁺ ions formation via the reaction of reduction of Cu²⁺ ions by hydrogen.     

Zeolite ZSM-5 containing copper ions: The effect of the copper salt anion and NH<Subscript>4</Subscript>OH/Cu<Superscript>2+</Superscript> ratio on the state of the copper ions and on the reactivity of the zeolite in DeNO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>

Isotherms of copper cation sorption by H-ZSM-5 zeolite from aqueous and aqueous ammonia solutions of copper acetate, chloride, nitrate, and sulfate are considered in terms of Langmuir’s monomolecular adsorption model. Using UV-Vis diffuse reflectance spectroscopy, IR spectroscopy, and temperatureprogrammed reduction with hydrogen and carbon monoxide, it has been demonstrated that the electronic state of the copper ions is determined by the ion exchange and heat treatment conditions. The state of the copper ions has an effect on the redox properties and reactivity of the Cu-ZSM-5 catalysts in the selective catalytic reduction (SCR) of NO with propane and in N₂O decomposition. The amount of Cu²⁺ that is sorbed by zeolite H-ZSM-5 from aqueous solution and is stabilized as isolated Cu²⁺ cations in cationexchange sites of the zeolite depends largely on the copper salt anion. The quantity of Cu(II) cations sorbed from aqueous solutions of copper salts of strong acids is smaller than the quantity of the same cations sorbed from the copper acetate solution. When copper chloride or sulfate is used, the zeolite is modified by the chloride or sulfate anion. Because of the presence of these anions, the redox properties and nitrogen oxides removal (DeNO _x ) efficiency of the Cu-ZSM-5 catalysts prepared using the copper salts of strong acids are worse than the same characteristics of the sample prepared using the copper acetate solution. The addition of ammonia to the aqueous solutions of copper salts diminishes the copper salt anion effect on the amount of Cu(II) sorbed from these solutions and hampers the nonspecific sorption of anions on the zeolite surface. As a consequence, the redox and DeNO _x properties of Cu-ZSM-5 depend considerably on the NH₄OH/Cu²⁺ ratio in the solution used in ion exchange. The aqueous ammonia solutions of the copper salts with NH₄OH/Cu²⁺ = 6–10 stabilize, in the Cu-ZSM-5 structure, Cu²⁺ ions bonded with extraframework oxygen, which are more active in DeNO _x than isolated Cu²⁺ ions (which form at NH4OH/Cu2+ = 30) or nanosized CuO particles (which form at NH₄OH/Cu²⁺ = 3).     

Phenoxazine‐based Near‐infrared Fluorescent Probes for the Specific Detection of Copper (II) Ions in Living Cells

Abstract : It is well known that copper ions play a critical role in various physiological processes. However, a variety of human diseases are tightly correlated with copper overload. Although there are numerous fluorescent probes capable of detecting copper ions, most of them are “turn‐off” probes owing to copper (II) ions fluorescence quenching effect, resulting in poor sensitivity. Herein, a novel “turn‐on” near‐infrared (NIR) fluorescent probe PZ‐N based on phenoxazine was designed and synthesized for the selective detection of copper (II) ions (Cu²⁺). Upon the addition of Cu²⁺, the probe could quickly react with Cu²⁺ and emit strong fluorescence, along with colour change from colourless to obvious blue. Moreover, the probe PZ‐N showed good water solubility, high selectivity, and excellent sensitivity with low limit of detection (1.93 nM) towards copper (II) ions. More importantly, PZ‐N was capable of effectively detecting Cu²⁺ in living cells.     

Copper(II) ion sensor based on electropolymerized undoped conducting polymers

A solid state copper(II) ion sensor is reported based on the application of electropolymerized undoped (neutral) polycarbazole (PCz) and polyindole (PIn) modified electrodes. The new sensor shows high selectivity to Cu²⁺ ions with a detection limit of 10^–5 M. PCz and PIn are formed respectively by the anodic oxidation of 50 mM carbazole and 5 mM indole monomers in dichloromethane containing 0.1 M tetrabutylammonium perchlorate on a platinum electrode using a single compartment cell. Potentiostatic polymerization of both the monomers are carried out at 1.3 V and 1.0 V vs. Ag/AgCl, respectively. Perchlorate ions were electrochemically removed from the polymer films by applying – 0.2 V vs. Ag/AgCl. Polymer-coated electrodes are incubated in 1 M KCl solution for 8 h followed by incubation in distilled water for 2 h before using as a metal ion sensor. The undoped PCz and PIn electrodes were found to be highly selective and sensitive for Cu²⁺ ions with little selectivity for Pb²⁺ and negligible response towards Ag⁺, Hg²⁺, Cu⁺, Ni²⁺, Co²⁺, Fe²⁺, Fe³⁺ or Zn²⁺. Potentiometric responses for Cu²⁺ ions are recorded for both the sensor electrodes together with a double-junction Ag/AgCl reference electrode. Calibration curves for Cu²⁺ are reported for both ion sensors. The polymer-modified electrodes were found to be stable for several weeks. Electronic Publication     

Electrodeposition of Copper Selenide onto Mo Electrode in Tartaric Acid Solution

Results are presented of a study of the electrochemical behavior of copper(II) and selenium(IV) ions and their joint reduction on a molybdenum electrode by cyclic voltammetry in a tartaric acid electrolyte. The potentiostatic deposition was used to obtain copper selenide deposits on Mo plates. The diffraction and energydispersive analyses demonstrated that a Cu_2?xSe compound is formed with an admixture of the CuSe phase. A suggestion is made that the process of underpotential reduction affects the formation of copper selenide. Copper selenide films were deposited at a potential of ?0.6 V in the course of 30 min with a thickness of 0.43 μm and high adhesion to the substrate. At potentials in this range, an additional amount of the deposit may be formed due to the chemical reaction between Cu⁺ and Se^2? ions. The p-type conduction was determined for films electrodeposited at various potentials.     

Cu(II)-catalyzed oscillatory chemical reactions

The role of copper ions in the copper-catalyzed chemical reactions is discussed. It is pointed out that copper ions can induce oscillatory behavior in many systems for the following reasons: (1) Copper cations can exist in three oxidation states (+1, +2 and +3); (2) Copper cations can form precipitates and stable complexes with a large number of reactants and intermediates; (3) Copper ions can participate in both oxidation and reduction processes, due to the surprisingly large range of redox potentials exhibited by the Cu²⁺/Cu⁺ and Cu³⁺/Cu²⁺ couples (known redox potentials span from 0.1 to 1.8 V, depending on the counter-ion or ligand present).     

Tartrate- and imidazole-derived diketones and diols: preparation and stability constants of their Cu2+ complexes

Abstract  

Overall, six tartrate- and imidazole-derived ketones and diols were synthesized in a stepwise manner as model compounds for the coordination of Cu²⁺ ions. The stability constants of copper(II) complexes were studied spectrophotometrically. It was found that the two model structures coordinate Cu²⁺ ions differentially.     

Simultaneous Determination of Nickel(II) and Copper(II) by Second‐Derivative Spectrophotometric Method in Micellar Media

A second‐derivative spectrophotometric method based on zero‐crossing over technique is developed in simultaneous determination of copper(II) and nickel(II) ions. Methylthymol blue (MTB) as a chromogenic reagent and cetyltrimethylammonium bromide as a surfactant were used, and measurements were carried out in buffered solution at pH 6 and at a temperature of 25 °C. The amplitude of derivative spectra was measured at wavelengths of 631.9 and 587.7 nm for the simultaneous determination of Ni²⁺ and Cu²⁺, respectively. Linearity was obtained in the range of 0.5–5.0 μg mL^?1 for both ions in the presence of 0.0–5.0 μg mL^?1 of the other ion as an interfering ion. IUPAC detection limits for Cu²⁺ and Ni²⁺ ions were obtained at 0.48 and 0.43 μg mL^?1, respectively. The proposed procedure has been applied successfully for the simultaneous determination of copper and nickel in synthetic binary mixtures and real samples.     

Contribution from the ion-exchange factor to the potential of a copper-containing electron-ion exchanger

The process of formation of the electrode potential of EI-21 electron-ion exchanger, composed of ultrafine copper particles and KU-23 sulfocationite, was studied. The potentials of a EI-21 powdery electrode with a platinum lead in copper(II) sulfate solutions of various concentrations (0.005–1.0 M) were measured using currentless-mode potentiometry. The potential of this electrode first shifted by 0.02–0.15 V in the negative direction with respect to a compact copper electrode, after which the shift eventually decreased to ?0.010 ± 0.003 V. It was demonstrated that the time evolution of the potential is determined by the interplay of electron and ion exchange. When EI-21 is placed onto a platinum lead, the role of the potential-determining reaction passes from Cu²⁺ + e^? ? Cu⁺ to Cu²⁺ + 2e^? ? Cu. At the same time, H⁺-Cu²⁺ ion exchange gives rise to a change in the ratio of the concentration of copper(II) ions in the internal and external solutions. The Donnan potential, which arises at the boundary between the electron-ion exchanger and the external solution, maintains a high concentration of copper(II) ions in the internal solution, a factor that facilitates the recrystallization of the particle distributed over the bulk of the exchanger. The process of recrystallization slows down with time to such an extent that the electrode potential stops changing, remaining at a level close to the equilibrium potential of the Cu²⁺/Cu pair. It was concluded that the internal stability of the system makes the potential of the EI-21 electrode sensitive to the dispersity of the metal component and the concentration of potential-determining metal ions in the external solution.     

Selective catalytic reduction of nitrogen monoxide with propene over CuCl/MCM-41 catalysts

Selective catalytic reduction of nitrogen monoxide with propene over two kinds of CuCl/MCM-41 catalysts prepared by a dispersion method has been studied. It was found that CuCl/AlMCM-41 exhibits substantially higher activity over CuCl/SiMCM-41. Characterization of these samples by H₂-TPR, IR and XRD showed that the active copper species were mainly related to Cu²⁺ and Cu⁺ ions in CuCl/AlMCM-41 catalyst.     

Selective extraction and release using (EDTA-Ni)-layered double hydroxide coupled with catalytic oxidation of 3,3′,5,5′-tetramethylbenzidine for sensitive detection of copper ion

Copper is an important heavy metal in various biological processes. Many methods have been developed for detecting of copper ions (Cu²⁺) in aqueous samples. However, an easy, cheap, selective and sensitive method is still desired. In this study, a selective extraction-release-catalysis approach has been developed for sensitive detection of copper ion. Ethylenediaminetetraacetic acid (EDTA) chelated with nickel ion (Ni²⁺) were intercalated in a layered double hydroxide via a co-precipitation reaction. The product was subsequently applied as sorbent in dispersive solid-phase extraction for the enrichment of Cu²⁺ at pH 6. Since Cu²⁺ has a stronger complex formation constant with EDTA, Ni²⁺ exchanged with Cu²⁺ selectively. The resulting sorbent containing Cu²⁺ was transferred to catalyze the 3,3′,5,5′-tetramethylbenzidine oxidation reaction, since Cu²⁺ could be released by the sorbent effectively and has high catalytic ability for the reaction. Blue light emitted from the oxidation product was measured by ultraviolet–visible spectrophotometry for the determination of Cu²⁺. The extraction temperature, extraction time, and catalysis time were optimized. The results showed that this method provided a low limit of detection of 10 nM, a wide linear range (0.05–100 μM) and good linearity (r² = 0.9977). The optimized conditions were applied to environmental water samples. Using Cu²⁺ as an example, this work provided a new and interesting approach for the convenient and efficient detection of metal cations in aqueous samples.     

Interactions of the ethanolamino groups of nanofilms with Co(II), Ni(II), Cu(II), Zn(II), and Cr(III) ammoniates at the surface of PVC plates

Interactions of nanofilms containing ethanolamino groups with cobalt(II), nickel(II), copper(II), and zinc(II) ammoniates at the surface of polyvinylchloride plates and with chromium(III) ammoniate in a solution of ammonium chloride were studied. It was found that the groups of the film, together with chloride ions, displace all ammonia molecules from the inner coordination sphere of the metal. The average number of the ethanolamino N atoms of the film participating in formation of the metal ion coordination sphere is 3.35, 3.47, 3.67, 3.42, and 3.37 for Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, and Cr³⁺ complexes, respectively. The average number of chloride ions is 2 for Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺ and 3 for Cr³⁺. The coordination number of the central atoms is 6. The Cr³⁺ ion forms a coordination sphere composed of three N atoms and three chloride ions and a coordination sphere (charged 1+) made up of four N atoms and two chloride ions, with the third chloride ion being in the outer sphere. The Co²⁺, Ni²⁺, and Cu²⁺ ions form uncharged coordination spheres of two types: (1) with four N atoms and two chloride ions and (2) with three N atoms, two chloride ions, and the O atom of the ethanol hydroxyl group.     

Influence of different copper(II) salts on the oxidation and doping reactions of emeraldine base polyaniline

A spectroscopic investigation of the products formed in the reaction of emeraldine base (EB-PANI) with copper(II) ions in dimethylacetamide (DMA) is presented. It is well known that metal cations can dope emeraldine base polyaniline (EB-PANI) through a pseudo-protonation reaction. Resonance Raman, UV–vis-NIR, and EPR data, obtained for Cu²⁺/EB-PANI solutions prepared using CuCl₂·2 H₂O, Cu(NO₃)₂· 3 H₂O or Cu(CH₃COO)₂·H₂O as Cu²⁺ sources, showed that the species formed in reactions of EB-PANI and Cu²⁺ ions are dependent on the anions of the copper salt employed. EPR spectra pointed out that the environments of Cu²⁺ ions with acetate, chloride or nitrate as anions in DMA solution are distinct. Resonance Raman and UV–vis-NIR data demonstrated that the main reactions are the oxidation of EB-PANI to pernigraniline base (PB-PANI) and doping of EB-PANI to ES-PANI (emeraldine salt) when a direct coordination of Cu²⁺ ions to PANI exists. With nitrate as very weak coordinating anion, ES-PANI is formed preferentially. When copper chloride is used, both oxidation and doping of EB-PANI are verified. Conversely with acetate, the dimeric cage structure of this copper salt is preserved in solution, and oxidation of EB-PANI to PB-PANI is the only observed reaction. These results demonstrate the possibility of modulating the products of reaction between Cu²⁺ ions and EB-PANI in DMA solution by changing the counter ion of the Cu²⁺ source.     

Die durch Blei(II) und Kupfer(II) katalysierte Zersetzung von Wasserstoffperoxid als Endpunktindikation chelatometrischer Titrationen

Zusammenfassung Die Anwendung der durch Blei(II) und Kupfer(II) katalysierten Zersetzung von Wasserstoffperoxid als exotherme Indikatorreaktion bei katalytisch-thermometrischer Endpunktindikation chelatometrischer Bestimmungen wird gezeigt. Die katalytische Wirkung von Blei(II) wird in ammoniak-ammoniumtartrathaltiger Lösung (p_H 12) und die Wirkung von Kupfer(II) in ammoniumcarbonathaltigem (p_H 8,8), natriumhydroxid-natriumcarbonathaltigem (p_H 10) und in ammoniakalischem Medium herangezogen. Die direkte Titration von ÄDTA, DCTA und NTA mit Kupfer(II) und Blei(II), die inverse Titration dieser Metalle, wie auch die Bestimmung einiger Metallionen (Zn²⁺, Cd²⁺, Cu²⁺, Ni²⁺, Pb²⁺, Bi³⁺, In³⁺, Th⁴⁺) durch Rücktitration wird beschrieben. Die genannten Ionen können im Milligramm- und Mikrogrammbereich mit befriedigender Genauigkeit bestimmt werden.

---

The end-point indication of chelatometric titrations by the decomposition of hydrogen peroxide catalyzed by lead(II) and copper(II)

Summary The application of the decomposition of hydrogen peroxide as exothermic indicator reaction catalyzed by lead(II) and copper(II), to catalytic thermometric endpoint detection of chelatometric titrations is described. The catalytic action of lead(II) is applied in ammonia-ammonium tartrate solution (p_H 12), the action of copper(II) in ammonium carbonate (p_H 8.8), sodium hydroxide-sodium carbonate (p_H 10) and in ammoniacal medium (p_H 12). The direct titration of EDTA, DCTA and NTA with copper(II) and lead(II), the invers titration of this metals, as well as the determination of several ions (Zn²⁺, Cd²⁺, Cu²⁺, Ni²⁺, Pb²⁺, Bi³⁺, In³⁺, Th⁴⁺) by backtitration has been developed. The ions mentioned can be determined in the milligram and in the microgram range with reasonable accuracy.

     

Approach to De-NOx-ing photocatalysis. II excited state of copper ions supported on silica and photocatalytic activity for no decomposition

Cu²⁺ ions supported on SiO₂ (Cm²⁺ /SiO₂) prepared by an ion-exchange method are reduced to Cu⁺ when Cu²⁺/SiO₂ samples are evacuated at temperatures higher than 573 K Reduced Cu²⁺ ions on SiO₂ (Cu⁺/SiO₂ catalyst) decomposes NO molecules photocatalytically and stoichiometrically into N₂ and O₂ at 275 K. The physicochemical and photochemical properties of copper ions anchored onto SiO₂ have been investigated by means of ESR and dynamic photoluminescence spectroscopies, as well as the analysis of photoreaction products. These results indicate that the excited state of the copper ions (Cu⁺ species) plays a significant role in the photocatalytic decomposition of NO molecules and the photoreaction involves an electron transfer from the excited state of the Cu⁺ ion into an anti-bonding π orbital of NO molecule within the lifetime of its excited state. Thus, the present results obtained with the Cu⁺/SiO₂ catalysts imply the possibility of their utilization as a potentially promising type of photocatalysts in gas-solid systems.