偏振模色散矢量的研究

研究了无损光纤的密勒矩阵,进而得出了偏振模色散矢量的解析表达式、主偏振态对应的斯托克斯矢量的解析表达式,以及高阶偏振模色散矢量的解析表达式.这些解析表达式是由光纤参数决定的.讨论了局部偏振模色散矢量与整体偏振模色散矢量的关系,讨论了利用偏振模色散矢量进行偏振模色散补偿的原理.引入了偏振模色散补偿元件的偏振模色散补偿矢量C,具体计算了正规的非圆光波导类的补偿元件的C.从理论上证明了仅仅利用一个正规的非圆光波导类的补偿元件,例如一根保偏光纤或是一个双折射晶体,是不能实现偏振模色散补偿 关键词： 偏振模色散 密勒矩阵 色散补偿 主偏振态斯托克斯矢量     

偏振模色散补偿中的偏振主态与分束器主轴的对准

光纤通信系统的比特率超过10Gb/s或更高时,偏振模色散引起的脉冲信号展宽成为主要障碍.分离光纤线路中的两个偏振模式对于提高偏振模色散补偿的精度和速度有重要意义.讨论了光纤线路中两偏振主态与补偿器中偏振分束器主轴的对准问题,给出了偏振分束器任何一个主轴上光强的表示并推导出相应的电功率信号表示式,建立了电功率与光信号两个模式之间的延迟时间以及偏振主态与分束器主轴相对角度的变化关系.初步实验表明,可以通过偏振控制器或可转动的光纤连接器实现偏振主态与偏振分束器的对准.     

基于Sagnac/双Mach-Zehnder原理的分布式光纤传感系统的偏振态分析

运用琼斯矩阵分析法,建立了该分布式传感器系统在传感光纤双折射和外部事件共同作用下,传输光的偏振态对系统功率传输系数影响的数学模型.仿真分析了在传感光纤线性双折射和圆双折射共同作用下,传输光的偏振态对系统功率传输系数的影响,并提出了利用偏振控制器对输入偏振态进行控制,从而改善干涉信号输出的方法.     

圆双折射光栅的传输和偏振特性研究及磁场传感应用

从原理上阐述了圆双折射光纤光栅中的传输特性和偏振特性.通过坐标变换,得到圆双折射光栅的琼斯矩阵,并基于此详细分析了磁场大小、传输距离和入射光偏振态对透射光传输特性和偏振特性的影响.结果表明,一定大小的磁致圆双折射将使透射谱产生分裂,透射光偏振态随磁场和波长变化.同时偏振相关损耗和第三斯托克斯参量与外加磁场大小在一定范围...     

单模圆光纤中受激拉曼散射光谱偏振特性的研究

研究了单模圆石英光纤在不同偏振光泵浦条件下,受激拉曼散射(SRS)各级斯托克斯光的拉曼阈值和频移特性,同时测试了光纤输出端的泵浦光和斯托克斯光的偏振状态.分析了偏振光在单模圆光纤中传输时偏振状态的变化.     

基于Sagnac原理的单轴分布式光纤传感系统偏振态分析

针对Sagnac干涉型单轴分布式光纤传感器中使用单模光纤作为传感器件时,由于传输光偏振态在双折射影响下所带来的干涉信号“偏振诱导衰落”问题,运用琼斯矩阵分析法,建立了该型传感器系统在传感光纤双折射和外部事件共同作用下,传输光的偏振态对系统功率传输系数影响的数学模型;仿真分析了在传感光纤线性双折射和圆双折射共同作用下,传输光的偏振态对系统功率传输系数的影响;提出了使用法拉第旋转镜提高系统抗偏振能力的改进方法.仿真结果表明,该方法能很好地消除光纤线性双折射和圆双折射.     

偏振敏感材料中具有圆各向异性的偏振全息光栅

在向列相液晶中掺杂质量分数约0.2%的偶氮侧链型聚合物制成偏振敏感材料,使用正交圆偏振光记录了具有圆各向异性的一维偏振全息光栅,用线偏振光探测偏振全息光栅,得到正,负一级衍射光也为线偏振光,且偏振态与探测光和零级偏振态相互正交,可以运用琼斯矩阵理论加以解释.偏振全息光栅可由外加电场控制衍射级的变化,即在外加电场作用下,正、负一级衍射产生了90°的相位差.在频率6.05 Hz、电压2.2 V的外场作用下,衍射级的极值振荡变化.     

基于法拉第旋镜的干涉型光纤传感系统偏振相位噪声特性研究

偏振诱导信号衰落现象的抑制是干涉型光纤传感系统的关键技术之一. 针对法拉第旋镜(FRM)法抑制偏振诱导信号衰落技术的残留偏振相位噪声问题进行了深入的理论和实验研究. 运用琼斯矩阵法建立了基于法拉第旋镜的干涉型光纤传感系统偏振相位噪声的理论模型; 分析了影响系统偏振相位噪声的主要原因: 法拉第旋镜的旋光角度偏差、入射光偏振态调制度、干涉仪两臂光纤双折射; 提出了相应的抑制偏振相位噪声的方法. 详细仿真分析了入射光偏振态调制度对干涉型光纤传感系统偏振相位噪声的影响, 仿真分析得出若法拉第旋镜旋光角度偏差为最大工艺制造误差1°, 当入射光偏振态调制度为1.84 rad时, 系统可能出现的最大偏振相位噪声为0.0815 rad. 最后, 搭建了基于M-Z型偏振态调制器的偏振相位噪声测试系统, 测试了在传输光纤受到外界偏振扰动的情况下, 干涉传感系统存在的偏振相位噪声, 实验测试结果与理论分析结果基本一致, 有力地证明了该偏振相位噪声理论分析模型的正确性.     

光纤偏振模色散的测量

光纤中的偏振模色散是限制高速光纤通信系统传输容量的极限因素，本文报道光纤偏振模色散的测量，对国内外多种光纤进行了测量比较，较长的单模非偏振保持光纤的多次测量值科克斯韦概率分布，同时发现国产的光纤质量有待改进，最后分析了一些实验中观察以的现象并作了解释和讨论。     

多偏振控制高双折射光纤环形镜输出特性的理论和实验研究

针对光纤环形镜(FLM)在单偏振控制下波长间隔不可调等缺点,对多偏振控制FLM的输出特性进行了理论和实验研究. 用Jones矩阵法分析了单偏振、双偏振和三偏振控制FLM的透射谱,研究发现: 相比单偏振控制FLM,多偏振控制FLM具有波长间隔可调和边频抑制等特性;透射谱的偏振可调性随偏振控制级数的增加而增强,实验结果与理论研究一致. 实验中利用双偏振控制FLM作为波长选择的光纤激光器输出激光的边模抑制比较采用单偏振控制FLM时提高了近5 dB. 关键词： 光纤光学 光纤环形镜 偏振控制 边频抑制     

Influence of material processing and interface on the fiber fragmentation process in titanium matrix composites

The objective of this work is to study the effect of composite processing conditions on the nature of the fiber–matrix interface in titanium matrix composites and the resulting fragmentation behavior of the fiber. Titanium matrix, single fiber composites (SFCs) were fabricated by diffusion bonding and tensile tested along the fiber axis to determine their interfacial load transfer characteristics and the resulting fiber fragmentation behavior. Two different titanium alloys, Ti-6Al-4V (wt%) and Ti-14Al-21Nb (wt%), were used as matrix material with SiC (SCS-6) fibers as reinforcement. The tensile tests were conducted at ambient temperature and were continuously monitored by acoustic emission. It was observed that the Ti-6Al-4V/SCS-6 composite system exhibited a greater degree of fiber–matrix interfacial reaction, as well as a rougher interface, compared to Ti-14Al-21Nb/SCS-6 composites. Acoustic emissions during tensile testing showed that most of the fiber fractures in Ti-6Al-4V/SCS-6 occurred at strains below ～5% and the fragmentation ceased at ～10% strain corresponding to specimen necking. In contrast, the Ti-14Al-21Nb/SCS-6 composite deformed without necking and fiber fractures occurred throughout the plastic range until final fracture of the specimen at about 12% strain. The markedly different fragmentation characteristics of these two composites were attributed to differences in the fiber–matrix interfacial regions and matrix deformation behavior.     

Performance of Polarizers and Coupler in an All Polarization Maintaining Fiber Interferometer

1 IntroductionThe fiber optic intefferometers are popular in the syStems of optical fiber sensors.The polarization maintaining fibers can improve the accuracy and stability of opticalfiber interferometers. An polarization maintaining fiber (Pine ) Michelsonnit.rferom.t..[l] can attain lOw-noise and high sensitivity Of COherent detection. Thequality of both the polarizers and the coupler in the systems can directly affect theoptical coherent signal to noise ratio (CSNR) of the interferomet…     

Performance of Polarizers and Coupler in an All Polarization Maintaining Fiber Interferometer

It is given mathematical models and analyze the performance of polarizers and coupler in an all polarization maintaining fiber (PMF) Michelson interferometer. The optical coherent signal to noise ratio (CSNR) of the interferometer is calculated by means of the Jones matrix with cross coupling matrix elements.     

Optical pumping nuclear magnetic resonance system rotating in a plane parallel to the quantization axis

A model of an optical pumping nuclear magnetic resonance system rotating in a plane parallel to the quantization axis is presented. Different coordinate frames for nuclear spin polarization vector are introduced, and theoretical calculation is conducted to analyze this model. We demonstrate that when the optical pumping nuclear magnetic resonance system rotates in a plane parallel to the quantization axis, it will maintain a steady state with respect to the quantization axis which is independent of rotational speed and direction.     

Surface and interfacial morphologies of PAN-CVI carbon–carbon composite

Scanning electron microscopy (SEM), polarized light microscopy (PLM), and transmission electron microscopy (TEM) techniques have been used to characterize the normal surface and flank surface microstructure of a polyacrylonitrile (PAN)-based carbon fiber reinforced chemical vapor infiltrated (CVI) matrix carbon–carbon composite. Optical and SEM results indicate that the CVI deposit consists of two structures: an isotropic phase is present in the fiber bundle-bundle junctions and a second highly oriented lamellar structure is present in the intrabundle matrix. TEM shows that matrix platelets are highly parallel to the fiber axis and the crystallites of the matrix near the fiber surface exhibit better alignment than those farther away from fibers.     

Mathematical modeling of random coupling between polarization modes in single-mode optical fibers: Integrated statistical properties of polarization modes of single-mode optical fibers in the presence of random inhomogeneities

Using mathematical modeling, an explicit form is found for the Jones matrix of a segment of a single-mode optical fiber with random inhomogeneities, whose length is considerably greater than the correlation length of random inhomogeneities. It is shown that parameters of this matrix are of a statistical nature. A rational representation of the matrix is proposed. It is shown that, under certain conditions, one of the matrix parameters may be treated as constant, whereas the other parameter is assumed to be continuously distributed on the interval [0, 2π]. As the latter parameter is changed, which corresponds to a change from one random realization of inhomogeneities in a single-mode fiber to another, the ellipticity and the azimuth of the major axis of the polarization ellipse of natural polarization modes of a single-mode fiber simultaneously change.     

Linear Transformation of the Polarization Modes in Coiled Optical Spun-Fibers with Strong Unperturbed Linear Birefringence. I. Nonresonant Transformation

A linear transformation of orthogonal polarization modes in coiled optical spun-fibers with strong unperturbed linear birefringence, which causes the emergence of the dependences of the integrated elliptical birefringence and the ellipticity and azimuth of the major axis of the ellipse, as well as the polarization state of radiation (PSR), on the length of optical fiber has been considered. Optical spun-fibers are subjected to a strong mechanical twisting, which is frozen into the structure of the optical fiber upon cooling, in the process of being drawn out from the workpiece. Since the values of the local polarization parameters of coiled spunwaveguides vary according to a rather complex law, the calculations were carried out by numerical modeling of the parameters of the Jones matrices. Since the rotation speed of the axes of the birefringence is constant on a relatively short segment of a coiled optical spun-fiber in the accompanying torsion (helical) coordinate system, the so-called “Ginzburg helical polarization modes” (GHPMs)—two mutually orthogonal ellipses with the opposite directions of traversal, the axis of which rotate relative to the fixed coordinate system uniformly and unidirectionally—are approximately the local normal polarization modes of such optical fiber. It has been shown that, despite the fact that the unperturbed linear birefringence of the spun-fibers significantly exceeds the linear birefringence, which is caused by the winding on a coil, the integral birefringence of an extended segment of such a fiber coincides in order of magnitude with the linear birefringence, which is caused by the winding on the coil, and the integral polarization modes tend asymptotically to circular ones. It has been also shown that the values of the circular birefringence of twisted single-mode fibers, which were calculated in a nonrotating and torsion helical coordinate systems, differ significantly. It has been shown that the polarization phenomena occur in the process of linear transformation of local polarization modes, which lead to small quasi-harmonic oscillations of the birefringence integral parameters of the optical spun-fibers, which depend on their length, and the period of these oscillations is approximately equal to half of the effective period of polarization beating.     

单轴晶体包层啁啾光纤光栅中电光效应和弹光效应的理论研究

提出了以单轴晶体材料为包层,光轴平行于光栅主轴(z轴)的新型啁啾光纤光栅模型,应用耦合模理论和传输矩阵方法在理论上分析了该类光纤光栅中的电光效应和弹光效应,理论研究发现在包层施加沿光栅轴向的电场和应变场可以改变布拉格波长和反射谱。得到了3种不同单轴晶体为包层时布拉格波长λB和反射光谱随外加电场和应变场变化的曲线。研究结果表明当轴向外加电场从1×107V/m变化到8×107V/m时λB减小0.12nm,当外加应变场从0变化到0.04时,λB减小0.45nm。     

全光纤量子保密通信中的偏振控制

介绍了在全光纤量子保密通信系统的量子信道中利用可转动光纤圈型偏振控制器实现对光纤偏振态的测量和调整.实验证明该方法能有效控制光纤中的偏振态.