The synthesis of new weakly coordinating diborate anions: anion stability as a function of linker structure and steric bulk

The successive addition of KCN and Ph3CCl to B(C6F4-C6F5-2)3 (PBB) affords triphenylmethyl salts of the [NC-PBB]- anion. By contrast, the analogous reaction with sodium dicyanamide followed by treatment with Ph(3)CCl leads to the zwitterionic aminoborane H2NB(C12F9)2C12F8, via nucleophilic attack on an o-F atom, together with CPh3[F-PBB]. Whereas treatment of [NC-PBB]- with either PBB or B(C6F5)3 fails to give isolable cyano-bridged diborates, the reaction of Me3SiNC-B(C6F5)3 with PBB in the presence of Ph3CCl affords [Ph3C][PBB-NC-B(C6F5)3]. Due to steric hindrance this anion is prone to borane dissociation. The longer linking group N(CN)2- gives the very voluminous anions [N[CNB(C6F5)3]2]- and [N(CN-PBB)2]-. A comparison of propylene polymerisations with rac-Me2Si(Ind)2ZrMe2 activated with the various boranes or trityl borates gives an anion-dependent activity sequence, in the order [NC-PBB]- < [MeB(C6F5)3]- < [MePBB]- approximately [PBB-NCB(C6F5)3]- approximately [N[CNB(C6F5)3]2]- < [F-PBB]-< [B(C6F5)4]- < [N(CN-PBB)2]-. The anion [N(CN-PBB)2]- gives a catalyst productivity about 2500 times higher than that of [NC-PBB]- and exceeds that of [B(C6F5)4]- based catalysts. The van der Waals volumes and surface areas of the anions have been calculated and provide a rationale for the observed reactivity trends in polymerisation reactions.     

Mononitrosyl tris(thiolate) iron complex [Fe(NO)(SPh)3]- and dinitrosyl iron complex [(EtS)2Fe(NO)2]-: formation pathway of dinitrosyl iron complexes (DNICs) from nitrosylation of biomimetic rubredoxin [Fe(SR)4]2-/1- (R = Ph, Et)

Nitrosylation of the biomimetic reduced- and oxidized-form rubredoxin [Fe(SR)4]2-/1- (R = Ph, Et) in a 1:1 stoichiometry led to the formation of the extremely air- and light-sensitive mononitrosyl tris(thiolate) iron complexes (MNICs) [Fe(NO)(SR)3]- along with byproducts [SR]- or (RS)2. Transformation of [Fe(NO)(SR)3]- into dinitrosyl iron complexes (DNICs) [(RS)2Fe(NO)2]- and Roussin's red ester [Fe2(mu-SR)2(NO)4] occurs rapidly under addition of 1 equiv of NO(g) and [NO]+, respectively. Obviously, the mononitrosyl tris(thiolate) complex [Fe(NO)(SR)3]- acts as an intermediate when the biomimetic oxidized- and reduced-form rubredoxin [Fe(SR)4]2-/1- exposed to NO(g) were modified to form dinitrosyl iron complexes [(RS)2Fe(NO)2]-. Presumably, NO binding to the electron-deficient [Fe(III)(SR)4]- and [Fe(III)(NO)(SR)3]- complexes triggers reductive elimination of dialkyl/diphenyl disulfide, while binding of NO radical to the reduced-form [Fe(II)(SR)4]2- induces the thiolate-ligand elimination. Protonation of [Fe(NO)(SEt)3]- yielding [Fe(NO)(SPh)3]- by adding 3 equiv of thiophenol and transformation of [Fe(NO)(SPh)3]- to [Fe(NO)(SEt)3]- in the presence of 3 equiv of [SEt]-, respectively, demonstrated that complexes [Fe(NO)(SPh)3]- and [Fe(NO)(SEt)3]- are chemically interconvertible. Mononitrosyl tris(thiolate) iron complex [Fe(NO)(SPh)3]- and dinitrosyl iron complex [(EtS)2Fe(NO)2]- were isolated and characterized by X-ray diffraction. The mean NO bond distances of 1.181(7) A (or 1.191(7) A) in complex [(EtS)2Fe(NO)2]- are nearly at the upper end of the 1.178(3)-1.160(6) A for the anionic {Fe(NO)2}9 DNICs, while the mean FeN(O) distances of 1.674(6) A (or 1.679(6) A) exactly fall in the range of 1.695(3)-1.661(4) A for the anionic {Fe(NO)2}9 DNICs.     

Synthesis and electrochemistry of new Rh-centered and conjuncto rhodium carbonyl clusters. X-ray structure of [NEt(4)](3)[Rh(15)(CO)(27)], [NEt(4)](3)[Rh(15)(CO)(25)(MeCN)(2)] x 2MeCN, and [NEt(4)](3)[Rh(17)(CO)(37)

A reinvestigation of the redox chemistry of [Rh7(CO)16]3- resulted in the finding of new alternative syntheses for a series of previously reported Rh-centered carbonyl clusters, i.e., [H4-nRh14(CO)25]n- (n = 3 and 4) and [Rh17(CO)30]3-, as well as new species such as a different isomer of [Rh15(CO)27]3-, the carbonyl-substituted [Rh15(CO)25(MeCN)2]3-, and the conjuncto [Rh17(CO)37]3- clusters. All of the above clusters are suggested to derive from oxidation of [Rh7(CO)16]3- with H+, arising from dissociation either of [M(H2O)n]2+ aquo complexes or nonoxidizing acids. The nature of the previously reported species has been confirmed by IR, electrospray ionization mass spectrometry, and complete X-ray diffraction studies. Only the molecular structures of the new clusters are reported in some details. The ready conversion of [Rh7(CO)16]3- in [HRh14(CO)25]3- upon oxidation has been confirmed by electrochemical techniques. In addition, electrochemical studies point out that the close-packed [H3Rh13(CO)24]2- dianion undergoes a reversible monoelectronic reduction followed by an irreversible reduction. The irreversibility of the second reduction is probably a consequence of H2 elimination from a purported [H3Rh13(CO)24]4- species. Conversely, the body-centered-cubic [HRh14(CO)25]3- and [Rh15(CO)27]3- trianions display several well-defined redox changes with features of electrochemical reversibility, even at low scan rate. The major conclusion of this work is that mild experimental conditions and a tailored oxidizing reagent may enable more selective conversion of [Rh7(CO)16]3- into a higher-nuclearity rhodium carbonyl cluster. It is also shown that isonuclear Rh clusters may display isomeric metal frameworks [i.e., [Rh15(CO)27]3-], as well as almost identical metal frames stabilized by a different number of carbonyl groups [i.e., [Rh15(CO)27]3- and [Rh15(CO)30]3-]. Other isonuclear Rh clusters stabilized by a different number of CO ligands more expectedly exhibit completely different metal geometries [i.e., [Rh17(CO)30]3- and [Rh17(CO)37]3-]. The first pair of isonuclear and isoskeletal clusters is particularly astonishing in that [Rh15(CO)30]3- features six valence electrons more than [Rh15(CO)27]3-. Finally, the electrochemical studies seem to suggest that interstitial Rh atoms are less effective than Ni and Pt interstitial atoms in promoting redox properties and inducing molecular capacitor behavior in carbonyl clusters.     

Zirconium and hafnium complexes containing bidentate diarylamido-phosphine ligands

The first examples of mononuclear, structurally characterized triarylphosphine complexes of zirconium and hafnium are reported. The metathetical reactions of MCl4(THF)2 (M = Zr, Hf) with [iPrNP]Li(THF)2 ([iPrNP]- = N-(2-(diphenylphosphino)phenyl)-2,6-diisopropylanilide) or [MeNP]Li(THF)2 ([MeNP]- = N-(2-(diphenylphosphino)phenyl)-2,6-dimethylanilide) in toluene at -35 degrees C produced the corresponding [iPrNP]MCl3(THF) and [MeNP]2MCl2, respectively, in high yield. In contrast, attempts to prepare [MeNP]MCl3(THF) and [iPrNP]2MCl2 led to the concomitant formation of mono- and bis-ligated complexes, from which purification proved rather ineffective. The solution and solid-state structures of [iPrNP]MCl3(THF) and [MeNP]2MCl2 were studied by multinuclear NMR spectroscopy and X-ray crystallography. The geometry of these six-coordinate complexes is best described as a distorted octahedron in which the chloride ligands in [iPrNP]MCl3(THF) adopt a virtually meridional coordination mode whereas those in [MeNP]2MCl2 are trans to each other.     

Effect of counteranion X on the spin crossover properties of a family of diiron(II) triazole complexes [Fe(II)2(PMAT)2](X)4

Seven diiron(II) complexes, [Fe(II)(2)(PMAT)(2)](X)(4), varying only in the anion X, have been prepared, where PMAT is 4-amino-3,5-bis{[(2-pyridylmethyl)-amino]methyl}-4H-1,2,4-triazole and X = BF(4)(-) (1), Cl(-) (2), PF(6)(-) (3), SbF(6)(-) (4), CF(3)SO(3)(-) (5), B(PhF)(4)(-) (6), and C(16)H(33)SO(3)(-) (7). Most were isolated as solvates, and the microcrystalline ([3], [4]·2H(2)O, [5]·H(2)O, and [6]·?MeCN) or powder ([2]·4H(2)O, and [7]·2H(2)O) samples obtained were studied by variable-temperature magnetic susceptibility and Mo?ssbauer methods. A structure determination on a crystal of [2]·2MeOH·H(2)O, revealed it to be a [LS-HS] mixed low spin (LS)-high spin (HS) state dinuclear complex at 90 K, but fully high spin, [HS-HS], at 293 K. In contrast, structures of both [5]·?IPA·H(2)O and [7]·1.6MeOH·0.4H(2)O showed them to be [HS-HS] at 90 K, whereas magnetic and M?ssbauer studies on [5]·H(2)O and [7]·2H(2)O revealed a different spin state, [LS-HS], at 90 K, presumably because of the difference in solvation. None of these complexes undergo thermal spin crossover (SCO) to the fully LS form, [LS-LS]. The PF(6)(-) and SbF(6)(-) complexes, 3 and [4]·2H(2)O, appear to be a mixture of [HS-LS] and [HS-HS] at low temperature, and undergo gradual SCO to [HS-HS] on warming. The CF(3)SO(3)(-) complex [5]·H(2)O undergoes gradual, partial SCO from [HS-LS] to a mixture of [HS-LS] and [HS-HS] at T(1/2) ≈ 180 K. The B(PhF)(4)(-) and C(16)H(33)SO(3)(-) complexes, [6]·(1)/(2)MeCN and [7]·2H(2)O, are approximately [LS-HS] at all temperatures, with an onset of gradual SCO with T(1/2) > 300 K.     

Preparation of 2-, 3-, 4- and 7-(2-alkylcarbamoyl-1-alkylvinyl)benzo[b]furans and their BLT1 and/or BLT2 inhibitory activities

Several 2-alkylcarbamoyl-1-alkylvinylbenzo[b]furans were designed to find a selective leukotriene B4 (LTB4) receptor antagonist. 2-(2-Alkylcarbamoyl-1-alkylvinyl)benzo[b]furans having a substituent group at the 3-position, 4-(2-alkylcarbamoyl-1-methylvinyl)benzo[b]furans having a substituent group at the 3-position, and 7-(2-alkylcarbamoyl-1-methylvinyl)benzo[b]furans and 3-(2-alkylcarbamoyl-1-alkylvinyl)benzo[b]furans were prepared and evaluated for LTB4 receptor (BLT1 and BLT2) inhibitory activities. (E)-3-Amino-4-[2-[2-(3,4-dimethoxyphenyl)ethylcarbamoyl]-1-methylvinyl]benzo[b]furan ((E)-17c) showed potent and selective inhibitory activity for BLT2. On the other hand, (E)-7-(2-diethylcarbamoyl-1-methylvinyl)benzo[b]furan ((E)-27a) showed potent inhibitory activity for both BLT1 and BLT2.     

Analytical application of acetate anion in negative electrospray ionization mass spectrometry for the analysis of triterpenoid saponins--ginsenosides

Ginsenosides containing different numbers of glycosyl groups can be easily differentiated based on the formation of characteristic ginsenoside-acetate adduct anions and deprotonated ginsenosides generated by electrospray ionization (ESI) of methanolic solutions of ginsenosides (M) and ammonium acetate (NH4OAc). Ginsenosides containing two glycosyl groups gave a characteristic mass spectral pattern consisting of [M+2OAc]2-, [M-H+OAc]2- and [M-2H]2- ions with m/z values differing by 30 Th, while this mass spectral pattern was not observed for ginsenosides containing one glycosyl group. Formation of [M+2OAc]2- was influenced by the chain length of glycosyl groups and was used to differentiate the ginsenosides containing different combinations of monosaccharide and disaccharide units in the glycosyl groups. Under identical collisional activation conditions, [M+OAc]-, [M-H+OAc]2- and [M+2OAc]2- underwent proton abstractions predominantly to generate [M-H]-, [M-2H]2- and [M-H+OAc]2- ions, respectively. The ion intensity ratios, I[M-H](-/I) [M+OAc]-, I[M-2H](2-/I) [M-H+2OAc]2- and I[M-H+OAc](2-/I) [M+OAc]2-, being sensitive to the structural differences of ginsenosides, could differentiate the isomeric ginsenosides, including (i) Rf, F11 and Rg1, (ii) Rd and Re, and (iii) Rb2 and Rc. Additionally, NH4OAc was found to enhance the sensitivity of detection of ginsenosides in the form of [M-H]- down to the femtomole level.     

Investigations of the products of the reaction of epichlorohydrin with aromatic amines

Heating 3-hydroxy-1,2,3,4-tetrahydrobenzo[h]quinoline with phosphorus oxychloride gave a mixture of isomeric 3-chloro-1,2,3,4-tetrahydrobenzo[h]quinoline and 2-(chloromethyl)-benz[g]indoline, which are converted to a mixture of 3-benzoyloxy-1,2,3,4-tetrahydrobenzo-[h]quinoline and 2-(benzoyloxymethyl)benz[g]indoline on reaction with potassium benzoate. Saponification of 2-(benzoyloxymethyl)benz[g]indoline gave 2-(hydroxymethyl)benz[g]indoline. The reaction of the isomeric chloro derivatives with potassium cyanide gave 2-(benz[g]-indolinyl)acetonitrile.See [1] for communication IX.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 362–366, March, 1972.     

Room-temperature phosphorescence and energy transfer in luminescent multinuclear platinum(II) complexes of branched alkynyls

A series of luminescent branched platinum(II) alkynyl complexes, [1,3,5-{RC[triple bond]C(PEt3)2PtC[triple bond]C-C6H4C[triple bond]C}3C6H3] (R=C6H5, C6H4OMe, C6H4Me, C6H4CF3, C5H4N, C6H4SAc, 1-napthyl (Np), 1-pyrenyl (Pyr), 1-anthryl-8-ethynyl (HC[triple bond]CAn)), [1,3-{PyrC[triple chemical bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-{(iPr)3SiC[triple bond]C}C6H3], and [1,3-{PyrC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-(HC[triple bond]C)C6H3], was successfully synthesized by using the precursors [1,3,5-{Cl(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}3C6H3] or [1,3-{Cl(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-{(iPr)3SiC[triple bond]C}C6H3]. The X-ray crystal structures of [1,3,5-{MeOC6H4C[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}3C6H3] and [1,8-{Cl(PEt3)2PtC[triple bond]C}2An] have been determined. These complexes were found to show long-lived emission in both solution and solid-state phases at room temperature. The emission origin of the branched complexes [1,3,5-{RC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}3C6H3] with R=C6H5, C6H4OMe, C6H4Me, C6H4CF3, C5H4N, and C6H4SAc was tentatively assigned to be derived from triplet states of predominantly intraligand (IL) character with some mixing of metal-to-ligand charge-transfer (MLCT) (dpi(Pt)-->pi*(C[triple bond]CR)) character, while the emission origin of the branched complexes with polyaromatic alkynyl ligands, [1,3,5-{RC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}3C6H3] with R=Np, Pyr, or HC[triple bond]CAn, [1,3-{PyrC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-{(iPr)3SiC[triple bond]C}C6H3], [1,3-{PyrC[triple bond]C(PEt3)2PtC[triple bond]CC6H4C[triple bond]C}2-5-(HC[triple bond]C)C6H3], and [1,8-{Cl(PEt3)2PtC[triple bond]C}2An], was tentatively assigned to be derived from the predominantly 3IL states of the respective polyaromatic alkynyl ligands, mixed with some 3MLCT (d(pi)(Pt)-->pi*(C[triple bond]CR)) character. By incorporating different alkynyl ligands into the periphery of these branched complexes, one could readily tune the nature of the lowest energy emissive state and the direction of the excitation energy transfer.     

Self-complementary

Three [3]catenanes with cavities large enough to accommodate aromatic guests have been designed and synthesized (yields = 5-20 %) by means of kinetically controlled self-assembly processes. The X-ray structural analysis of one of three [3]catenanes confirmed the presence of a rectangular cavity (dimensions = 7 x 11 A) lined by pi-electron-rich recognition sites and hydrogen-bond acceptor groups. In spite of their apparently ideal recognition features, none of these [3]catenanes bind guests incorporating a pi-electron-deficient bipyridinium unit. However, the template-directed syntheses of the [3]catenanes also produce, in yields of 2-23%, [2]catenanes incorporating a 1,5-dioxynaphtho[38]crown-10 interlocked with a bipyridinium-based tetracationic cyclophane. The X-ray structural analyses of two of these [2]catenanes revealed that a combination of [pi...pi] and [C-H...pi] interactions is responsible for the formation of supramolecular homodimers in the solid state. 1H NMR spectroscopic investigations of the four [2]catenanes demonstrated that supramolecular homodimers are also formed (Ka= 17-31M(-1), T= 185 K) in (CD3)2CO solutions. Dynamic 1H NMR spectroscopy revealed that the 1,5-dioxynaphtho[38]crown-10 and tetracationic cyclophane components in the four [2]catenanes and in the three [3]catenanes circumrotate (deltaGc(not equal to) = 9-14 kcal mol(-1)) through each other's cavity in (CD3)2CO. Similarly, the 1,5-dioxynaphthalene and the bipyridinium ring systems rotate (deltaGc(not equal to) =10-14 kcal mol(-1)) about their [O...O] and [N...N] axes, respectively, in solution.     

Sulfone-linked paracyclophanes via macrocyclic aromatic thioethers: synthetic and structural investigations

Reaction of 4,4'-sulfonylbis(benzenethiol) with 4,4'-dichlorodiphenylsulfone under pseudo-high-dilution conditions leads to macrocyclic thioethersulfones [-S-Ar-SO2-Ar-]n (Ar = 1,4-phenylene). These include a highly strained [1+1] cyclodimer (n = 2), a cyclotrimer resulting from thioetherexchange reactions, and a [2+2] cyclotetramer which can adopt two entirely different conformations in the crystalline state, one having molecular D2d ("tennis-ball-seam") symmetry. The same type of reaction is successful using 4,4'-thiobis(benzenethiol) instead of 4,4'-sulfonylbis(benzenethiol) and affords macrocycles with a higher ratio of thioether to sulfone linkages. Exhaustive oxidation of macrocyclic thioethersulfones with hydrogen peroxide affords a series of sulfone-linked paracyclophanes, [-Ar-SO2-]4, [-Ar-SO2-]6, [-Ar-SO2-]8 and [-Ar-SO2-]12. Single crystal X-ray analysis reveals [Ar-SO2-]4 to be a near-perfect square box, whilst the cyclic hexamer [-Ar-SO2-]6 adopts a much more irregular conformation. and [-Ar-SO2-]8 displays a "double-box" structure clearly related to that of [Ar-SO2-]4.     

Formation of intramolecular rings in ferramonocarbollide complexes

Addition of PPh 2Cl and Tl[PF 6] to CH 2Cl 2 solutions of [N(PPh 3) 2][6,6,6-(CO) 3- closo-6,1-FeCB 8H 9] ( 1) affords the isomeric B-substituted species [6,6,6-(CO) 3- n-(PHPh 2)- closo-6,1-FeCB 8H 8] [ n = 7 ( 2a) or 10 ( 2b)]. Deprotonation (NaH) of the phosphine ligand in 2a, with subsequent addition of [IrCl(CO)(PPh 3) 2] and Tl[PF 6], yields the neutral, zwitterionic complex [6,6,6-(CO) 3-4,7-mu-{Ir(H)(CO)(PPh 3) 2PPh 2}- closo-6,1-FeCB 8H 7] ( 3), which contains a B-P-Ir- B ring. Alternatively, deprotonation using NEt 3, followed by addition of HC[triple bond]CCH 2Br, affords [6,6,6-(CO) 3-7-(PPh 2CCMe)- closo-6,1-FeCB 8H 8] ( 4). Addition of [Co 2(CO) 8] to CH 2Cl 2 solutions of the latter gives [6,6,6-(CO) 3-7-(PPh 2-{(mu-eta (2):eta (2)-CCMe)Co 2(CO) 6})- closo-6,1-FeCB 8H 8] ( 5), which contains a {C 2Co 2} tetrahedron. In the absence of added substrates, deprotonation of the PHPh 2 group in compounds 2, followed by reaction of the resulting anions with CH 2Cl 2 solvent, affords [6,6,6-(CO) 3- n-(PPh 2CH 2Cl)- closo-6,1-FeCB 8H 8] [ n = 7 ( 6a) or 10 ( 6b)] plus [6,6-(CO) 2-6,7-mu-{PPh 2CH 2PPh 2}- closo-6,1-FeCB 8H 8] ( 7, formed from 2a), of which the latter species possesses an intramolecular B-P-C-P- Fe ring. Addition of Me 3NO to CH 2Cl 2 solutions of 2a causes loss of an Fe-bound CO ligand and formation of [6,6-(CO) 2-6,7-mu-{NMe 2CH 2PPh 2}- closo-6,1-FeCB 8H 8] ( 8), which incorporates a B-P-C-N- Fe ring. A similar reaction in the presence of ligands L yields [6,6-(CO) 2-6-L-7-(PPh 2CH 2Cl)- closo-6,1-FeCB 8H 8] [L = PEt 3 ( 9) or CNBu (t) ( 10)], in addition to 8.     

Penta- and hexaruthenium carbonyl 'raft' complexes supported by monocarborane cage ligands

Reaction between [PPh4][closo-4-CB8H9] and [Ru3(CO)12] in refluxing toluene affords the unprecedented hexaruthenium metallacarborane salt [PPh4][2,3,7-{Ru(CO)3}-2,6,11-{Ru(CO)3}-7,11,12-{Ru(CO)3}-3,6,12-(micro-H)3-2,2,7,7,11,11-(CO)6-closo-2,7,11,1-Ru3CB8H6] (1a), which contains a planar Ru6 'raft' supported by a {CB8} monocarborane cluster. Addition of [CuCl(PPh3)]4 and Tl[PF6] to a CH2Cl2 solution of 1a results in simple cation replacement, forming the analogous [Cu(PPh3)3]+ salt (1b). The phenyl-substituted monocarborane [NEt4][6-Ph-nido-6-CB9H11] reacts with [Ru3(CO)12] in refluxing 1,2-dimethoxyethane to afford the pentaruthenium cluster species [N(PPh3)2][2,3,7-{Ru(CO)3}-3,4,8-{Ru(CO)3}-7,8-(micro-H)2-1-Ph-2,2,3,3,4,4-(CO)6-hypercloso-2,3,4,1-Ru3CB8H6] (2), after addition of [N(PPh3)2]Cl. Treatment of 2 with [CuCl(PPh3)]4 and Tl[PF6] in CH2Cl2 forms the zwitterionic complex [10,12-{exo-Cu(PPh3)2}-2,3,7-{Ru(CO)3}-3,4,8-{Ru(CO)3}-7,8,10,12-(micro-H)4-1-Ph-2,2,3,3,4,4-(CO)6-hypercloso-2,3,4,1-Ru3CB8H4] (3). Substitution of CO by PPh3 with concomitant cation replacement occurs on introduction of [AuCl(PPh3)], Tl[PF6], and PPh3 to a CH2Cl2 solution of 2, forming [Au(PPh3)2][2,3,7-{Ru(CO)2PPh3}-3,4,8-{Ru(CO)2PPh3}-7,8-(micro-H)2-1-Ph-2,2,3,3,4,4-(CO)6-hypercloso-2,3,4,1-Ru3CB8H6] (4). Crystallographic studies confirmed the cluster architectures in 1b, 2, and 3.     

Imidazo[2,1-b]benzothiazoles. II. Synthesis and antiinflammatory activity of some imidazo[2,1-b]benzothiazoles

3-[2-[p-(Un)substituted phenyl]imidazo [2,1-b]benzothiazol-3- yl]propionic acid derivatives (2a--e) were prepared via the interaction of the corresponding 2-[p-(un)substituted phenyl]imidazo[2,1-b]benzothiazoles (1a--e) with acrylic acid in the presence of acetic anhydride and acetic acid. Esterification of 2a--e produced methyl esters (3a--e). Upon the interaction of 3a with m-chloroperbenzoic acid, the S-dioxide (4a) was obtained. Compound 5a was prepared from 4a by alkaline hydrolysis. Vilsmeier formylation for 1a--e produced novel [2-[p-(un)substituted phenyl]imidazo[2,1-b]benzothiazol-3- yl]formaldehyde derivatives (6a--e). Derivatives 6a--e reacted with ethyl bromoacetate to give ethyl 3-hydroxy-3-[2-[p-(un)substituted phenyl]imidazo[2,1-b]benzothiazol- 3-yl]propionate esters (7a--e). Compound dl-7a was resolved with l-(+)-tartaric acid. Compounds 2a--e showed weak or no activity in the carrageein-induced paw edema assay. Compound 4a significantly inhibited the leakage of pontamine-sky blue dye into the peritoneal cavity of mice, in the capillary permeability inhibition assay. Compound 5a inhibited the writhing by 62% in the acetic acid-induced writhing assay.     

18F-labeled pyrazolo[1,5-a]pyrimidine derivatives: synthesis from 2,4-dinitrobenzamide and tosylate precursors and comparative biological evaluation for tumor imaging with positron emission tomography

We previously reported 18F-labeled pyrazolo[1,5-a]pyrimidine derivatives: 7-(2-[18F]fluoroethylamino)-5-methylpyrazolo[1,5-a]pyrimidine-3-carbonitrile ([18F]1) and N-(2-(3-cyano-5-methylpyrazolo[1,5-a]pyrimidin-7-ylamino)ethyl)-2-[18F]fluoro-4-nitro- benzamide ([18F]2). Preliminary biodistribution experiments of both compounds showed s slow clearance rate from excretory tissues which warranted further investigation for tumor imaging with PET. Here we modified [18F]1 and [18F]2 by introducing polar groups such as ester, hydroxyl and carboxyl and developed three additional 18F-18 labeled pyrazolo[1,5-a] pyrimidine derivatives: (3-Cyano-7-(2-[18F]fluoroethylamino)pyrazolo[1,5-a]-pyrimidin-5- yl)methyl acetate ([18F]3), 7-(2-[18F]fluoroethylamino)-5-(hydroxymethyl)pyrazolo[1,5-a]- pyrimidine-3-carbonitrile ([18F]4) and (S)-6-(3-cyano-5-methylpyrazolo[1,5-a]pyrimidin-7-ylamino)-2-(2-[18F]fluoro-4-nitrobenzamido)hexanoic acid ([18F]5). The radiolabeled probes were synthesized by nucleophilic substitution of the corresponding tosylate and nitro precursors with 18F-fluoride. In Vitro studies showed higher uptake of [18F]3 and [18F]4 than that of [18F]5 by S180 tumor cells. In Vivo biodistribution studies in mice bearing S180 tumors showed that the uptake of both [18F]3 and [18F]4 in tumors displayed an increasing trend while the uptake of [18F]5 in tumor decreased through the course of the 120 min study. This significant difference in tumor uptake was also found between [18F]1 and [18F]2. Thus, we compared the biological behavior of the five tracers and reported the tumor uptake kinetic differences between 2-[18F]fluoroethylamino- and 2-[18F]fluoro-4-nitro- benzamidopyrazolo[1,5-a] pyrimidine derivatives.     

Metallomacrocycles from ditopic chiral scorpionate ligands

Rare examples of heteroditopic scorpionate ligands [m-(pz(HO)BtBu)(pz2BtBu)C6H4]2- ([m]2-) and [p-(pz(HO)BtBu)(pz2BtBu)C6H4]2- ([p]2-) are reported. As a unique feature, both ligands possess a chiral boron centre. Treatment of [m]2- and [p]2- with FeII and CoII ions, respectively, gives the dinuclear metallomacrocycles [FeII2(micro-m)2] and [CoII2(micro-p)2]. The molecular structures of the colourless complex [FeII2(micro-m)2] and the red-purple complex [CoII2(micro-p)2] have been determined by X-ray crystallography. To meet the geometric requirements of macrocycle formation, the two asymmetric boron centres have opposite absolute configurations in the case of [FeII2(micro-m)2] and the same configuration in [CoII2(micro-p)2].     

A NOVEL SYNTHESIS OF 2-SUBSTITUTED-4H-THIENO [2,3-d][1,3] OXAZIN-4-ONE AND 2,3-DISUBSTITUTED THIENO [2,3-d]PYRIMIDIN-4(3H)-ONE DERIVATIVES

Abstract

The synthesis of acetic 2-{[1-methyl-2-(4-oxo-5,6,7,8-tetrahydro-4H-benzo [4,5]-thieno [2,3-d] [1,3-oxazin-2-yl)ethylidene]amino}-4,5,6,7-tetrahydrohenzo[b]thiophene ?3-carboxylic acid anhydride 5 and 2-(oxopropyl)-5,6,7,8-tetrahydro-4H-benzo-[4,5] thieno[2,3-d][1,3]oxazin-4-one 7, has been achieved in three steps from ethyl 2-amino-4,5,6,7-tetrahydrobenzo(b]thiophene-3-carboxlate 1 via the reaction with ethyl acetoacetate followed by hydrolysis and acetic anhydride-induced cyclization. The 2-substituent in compound 5 has two functional groups i.e. active methylene and acid anhydride which are suitably located for intramolecular transformation. Thermal and/or base catalyzed intramolecular cyclization of 5 afforded 2-(4-acetoxy-(hydroxyl)-2-methyl-5,6,7,8-tetrahydrobenzo[4,5] thieno[2,3-b]pyridin-3-yl)-5,6,7,8- tetrahydro-4H-benzo[4,5]thieno[2,3-d] [1,3]oxazin-4-one 10 and 9 respectively. Treatment of 5 with hydrazine hydrate, aromatic and/or heterocyclic amines induced the same intramolecular cyclization with a concomitant oxazine-pyrimidine interconversion to give 3-amino(aryl or heteryl)-2-(4-hydroxy-5,6,7,8-tetrdhydrobenzo-[4,5]thieno[2,3-b]pyridin-3-yl)-3,4,5,6,7,8-hexahydrobenzo[4,5] thieno[2,3-d] pyrimid in-4-one 11–14 respectively.     

Assembly of a new family of mercury(II) zwitterionic thiolate complexes from a preformed compound [Hg(Tab)2](PF6)2 [Tab = 4-(trimethylammonio)benzenethiolate

Reactions of Hg(OAc)2 with 2 equiv of TabHPF6 [TabH = 4-(trimethylammonio)benzenethiol] in MeCN/MeOH afforded a mononuclear linear complex [Hg(Tab)2](PF6)2 (1). By using 1 as a precursor, a new family of mercury(II) zwitterionic thiolate complexes, [Hg2(Tab)6](PF6)4.2MeCN (2.2MeCN), [Hg(Tab)2(SCN)](PF6) (3), [Hg(Tab)2(SCN)2] (4), [Hg(Tab)I2] (5), {[Hg(Tab)2]4[HgI2][Hg2I6]}(PF6)2(NO3)4 (6), [Hg(Tab)2][HgI4] (7), [Hg(Tab)2][HgCl2(SCN)2] (8), [Tab-Tab]2[Hg3Cl10] (9), and [Hg2(Tab)6]3(PF6)Cl11 (10), were prepared and characterized by elemental analysis, IR spectra, UV-vis spectra, 1H NMR, and single-crystal X-ray crystallography. The [Hg2(Tab)6]4+ tetracation of 2 or 10 contains an asymmetrical Hg2S2 rhomb with an inversion center lying on the midpoint of the Hg...Hg line. The Hg atom of the [Hg(Tab)2]2+ dication of 3 is coordinated to one SCN-, forming a rare T-shaped coordination geometry, while in 4, the Hg atom of [Hg(Tab)2]2+ is coordinated to two SCN-, forming a seesaw-shaped coordination geometry. Through weak secondary Hg...S coordinations, each cation in 3 is further linked to afford a one-dimensional zigzag chain. The trigonal [Hg(Tab)I2] molecules in 5 are held together by weak secondary Hg...I and Hg...S interactions, forming a one-dimensional chain structure. In 6, the four [Hg(Tab)2]2+ dications, one HgI2 molecule, one [Hg2I6]2- dianion, one PF6-, and four NO3- anions are interconnected by complicated secondary Hg...I and Hg...O interactions, forming a scolopendra-like chain structure. The secondary Hg...I interactions, [Hg(Tab)2]2+ and [HgI4]2- in 7, are combined to generate a one-dimensional chain structure, while [Hg(Tab)2]2+ and [HgCl2(SCN)2]2- in 8 are interconnected by secondary Hg...N interactions to form a one-dimensional zigzag chain structure. Compound 9 consists of two [Tab-Tab]2+ dications and one [Hg3Cl10]4- tetraanion. The facile approach to the construction of 2-8 and 10 from 1 may be applicable to the mimicking of a coordination sphere of the Hg sites of metallothioneins.     

Synthesis and crystal structure of uranium(IV) complexes with calix[n]arenes (n = 4, 6 and 8): mononuclear, polynuclear and 1D polymeric species

Reactions of UCl4 with calix[n]arenes (n = 4, 6) in THF gave the mononuclear [UCl2(calix[4]arene - 2H)(THF)2].2THF (.2THF) and the bis-dinuclear [U2Cl2(calix[6]arene - 6H)(THF)3]2.6THF (.6THF) complexes, respectively, while the mono-, di- and trinuclear compounds [Hpy]2[UCl3(calix[4]arene - 3H)].py (.py), [Hpy](4)[U2Cl6(calix[6]arene - 6H)].3py (.3py), [Hpy]3[U2Cl5(calix[6]arene - 6H)(py)].py (.py) and [Hpy]6[U3Cl11(calix[8]arene - 7H)].3py (.3py) were obtained by treatment of UCl4 with calix[n]arenes (n = 4, 6, 8) in pyridine. The sodium salt of calix[8]arene reacted with UCl4 to give the pentanuclear complex [U{U2Cl3(calix[8]arene - 7H)(py)5}2].8py (.8py). Reaction of U(acac)4 (acac = MeCOCHCOMe) with calix[4]arene in pyridine afforded the mononuclear complex [U(acac)2(calix[4]arene - 2H)].4py (.4py) and its treatment with the sodium salt of calix[8]arene led to the formation of the 1D polymer [U2(acac)6(calix[8]arene - 6H)(py)4Na4]n. The sandwich complex [Hpy]2[U(calix[4]arene - 3H)2][OTf].4py (.4py) was obtained by treatment of U(OTf)4 (OTf = OSO2CF3) with calix[4]arene in pyridine. All the complexes have been characterized by X-ray diffraction analysis.     

Fluorinated tris(pyrazolyl)borate ligands without the problematic hydride moiety: isolation of copper(I) ethylene and copper(I)-tin(II) complexes using [MeB(3-(CF3)Pz)3]-

The thallium derivative of a fluorinated, B-methylated, tris(pyrazolyl)borate ligand, [MeB(3-(CF3)Pz)3]-, has been synthesized via a two-step process using the corresponding pyrazole, Li[MeBH3], and thallium(I) acetate. Reaction of [MeB(3-(CF3)Pz)3]Tl with CuBr in the presence of ethylene leads to [MeB(3-(CF3)Pz)3]Cu(C2H4). It is a thermally stable solid. [MeB(3-(CF3)Pz)3]Cu(C2H4) reacts with [(Bn)2ATI]SnCl to yield [MeB(3-(CF3)Pz)3]Cu<--Sn(Cl)[(Bn)2ATI], featuring an unsupported Cu(I)-Sn(II) bond [2.4540(4) A].