Fabrication of mesoporous SiO2–C–Fe3O4/γ–Fe2O3 and SiO2–C–Fe magnetic composites

A synthetic method for the fabrication of silica-based mesoporous magnetic (Fe or iron oxide spinel) nanocomposites with enhanced adsorption and magnetic capabilities is presented. The successful in situ synthesis of magnetic nanoparticles is a consequence of the incorporation of a small amount of carbon into the pores of the silica, this step being essential for the generation of relatively large iron oxide magnetic nanocrystals (10 ± 3 nm) and for the formation of iron nanoparticles. These composites combine good magnetic properties (superparamagnetic behaviour in the case of SiO₂–C–Fe₃O₄/γ–Fe₂O₃ samples) with a large and accessible porosity made up of wide mesopores (>9 nm). In the present work, we have demonstrated the usefulness of this kind of composite for the adsorption of a globular protein (hemoglobin). The results obtained show that a significant amount of hemoglobin can be immobilized within the pores of these materials (up to 180 mg g⁻¹ for some of the samples). Moreover, we have proved that the composite loaded with hemoglobin can be easily manipulated by means of an external magnetic field.     

Photochemical Preparation of Nanoparticles of Ag in Aqueous-Alcoholic Solutions and on the Surface of Mesoporous Silica

Stable nanoparticle colloids of silver were obtained by irradiation of aqueous-alcoholic solutions of AgNO₃ in the presence of mesoporous SiO₂ powder and films modified with benzophenone (BP/SiO₂). Colloidal solutions of Ludox silica were used to stabilize the photochemically produced nanoparticles of silver in solution. Formation of nanoparticles of Ag on the surface of mesoporous silica occurred on irradiation of SiO₂ modified with silver ions (Ag⁺/SiO₂) in the presence of benzophenone solution.__________Translated from Teoreticheskaya i Eksperimental’naya Khimiya, Vol. 41, No. 2, pp. 100–104, March–April, 2005.     

Glass–ceramic Li2S–P2S5 electrolytes prepared by a single step ball billing process and their application for all-solid-state lithium–ion batteries

We report that glass–ceramic Li₂S–P₂S₅ electrolytes can be prepared by a single step ball milling (SSBM) process. Mechanical ball milling of the xLi₂S·(100 − x)P₂S₅ system at 55 °C produced crystalline glass–ceramic materials exhibiting high Li-ion conductivity over 10⁻³ S cm⁻¹ at room temperature with a wide electrochemical stability window of 5 V. Silicon nanoparticles were evaluated as anode material in a solid-state Li battery employing the glass–ceramic electrolyte produced by the SSBM process and showed outstanding cycling stability.     

Cobalt–silicon mixed oxide nanocomposites by modified sol–gel method

Cobalt–silicon mixed oxide materials (Co/Si=0.111, 0.250 and 0.428) were synthesised starting from Co(NO₃)₂·6H₂O and Si(OC₂H₅)₄ using a modified sol–gel method. Structural, textural and surface chemical properties were investigated by thermogravimetric/differential thermal analyses (TG/DTA), XRD, UV–vis, FT-IR spectroscopy and N₂ adsorption at −196 °C. The nature of cobalt species and their interactions with the siloxane matrix were strongly depending on both the cobalt loading and the heat treatment. All dried gels were amorphous and contained Co²⁺ ions forming both tetrahedral and octahedral complexes with the siloxane matrix. After treatment at 400 °C, the sample with lowest Co content appeared amorphous and contained only Co²⁺ tetrahedral complexes, while at higher cobalt loading Co₃O₄ was present as the only crystalline phase, besides Co²⁺ ions strongly interacting with siloxane matrix. At 850 °C, in all samples crystalline Co₂SiO₄ was formed and was the only crystallising phase for the nanocomposite with the lowest cobalt content. All materials retained high surface areas also after treatments at 600 °C and exhibited surface Lewis acidity, due to cationic sites. The presence of cobalt affected the textural properties of the siloxane matrix decreasing microporosity and increasing mesoporosity.     

Electrocatalytic applications of a sol–gel derived cobalt phthalocyanine–dispersed carbon–ceramic electrode

The preparation and characterization of a surface renewable carbon–ceramic electrode, SiO₂/SnO₂/C-graphite/(SiPy⁺)₄CoPcTs⁻⁴, is reported. Cobalt(II) tetrasulfonated phthalocyanine (CoPcTs⁻⁴) absorbed on a 3-n-propylpyridinium chloride silsesquioxane polymer was dispersed in a stannic-silica C-graphite sol–gel matrix. The performance of SiO₂/SnO₂/C-graphite/(SiPy⁺)₄CoPcTs⁻⁴ as electrode material was investigated by cyclic voltammetry in the electrocatalytic oxidation of oxalic acid and nitrite. The modified carbon–ceramic material was characterized by X-ray fluorescence spectroscopy, BET specific surface area, thermogravimetric analysis, X-ray photoelectron spectroscopy, and scanning electron microscopy.     

Preparation and properties of mechanically alloyed and electrochemically etched porous Ti–6Al–4V

Formation of porous Ti–6Al–4V nanostructure biomaterial was described. The alloy was prepared by mechanical alloying followed by pressing, sintering and subsequent anodic electrochemical etching in 1 M H₃PO₄ + 2% HF electrolyte at 10 V for 30 min. Mechanically alloyed Ti–6Al–4V has nanostructure with grain size of about 35 nm and large grain boundaries volume fraction, which essentially improve etching process. The electrolyte penetrates sintered compacts through the grain boundaries, resulting in effective material removing and pores formation. The pore diameter reaches up to 60 μm, which is very attractive for strong bonding with bone. The anodization of the microcrystalline alloy ingot results in selective etching, revealing of the two-phase structure with relatively flat surface. The corrosion properties were investigated in Ringer’s solution. Mechanically alloyed samples shows worse corrosion resistance than the bulk microcrystalline alloy ingot, but electrochemical etching results in improving corrosion resistance.     

Protoporphyrin IX‐Functionalized AgSiO2 Core–Shell Nanoparticles: Plasmonic Enhancement of Fluorescence and Singlet Oxygen Production

Metal‐enhanced processes arising from the coupling of a dye with metallic nanoparticles (NPs) have been widely reported. However, few studies have simultaneously investigated these mechanisms from the viewpoint of dye fluorescence and photoactivity. Herein, protoporphyrin IX (PpIX) is grafted onto the surface of silver core silica shell NPs in order to investigate the effect of silver (Ag) localized surface plasmon resonance (LSPR) on PpIX fluorescence and PpIX singlet oxygen (¹O₂) production. Using two Ag core sizes, we report a systematic study of these photophysical processes as a function of silica (SiO₂) spacer thickness, LSPR band position and excitation wavelength. The excitation of Ag NP LSPR, which overlaps the PpIX absorption band, leads to the concomitant enhancement of PpIX fluorescence and ¹O₂ production independently of the Ag core size, but in a more pronounced way for larger Ag cores. These enhancements result from the increase in the PpIX excitation rate through the LSPR excitation and decrease when the distance between PpIX and Ag NPs increases. A maximum fluorescence enhancement of up to 14‐fold, together with an increase in photogenerated ¹O₂ production of up to five times are obtained using 100 nm Ag cores coated with a 5 nm thick silica coating.     

Influence of copper species on silver grain size in Ag–CuO–SiO2 ternary nanocomposites

The influence of Cu species on Ag grain size in Ag–CuO–SiO₂ ternary nanocomposites prepared by adsorbed-layer nanoreactor technique (ALRT)was investigated. Ag and CuO nanoparticles were synthesized on the silica surface one after the other, then the grain size of Ag was determined by X-ray diffraction. Ag grains became smaller with increase in amount of Cu, whether Cu species was fed before or after Ag species, implying that the grain growth of Ag was inhibited by the appearance of Cu(OH)₂ in both feeding sequences. Furthermore, after taken away the effect of alkaline concentration on Ag grain size, the inhibition effects of two feeding sequences become more similar.     

An improved preparation of mesoporous silica‐supported Pd as sustainable catalysts for phosphine‐free Suzuki–Miyaura and Heck coupling reactions

An improved and eco‐friendly procedure has been developed to generate mesoporous silica‐supported palladium nanoparticles (SiO₂@PdNP) that could be used as a sustainable heterogeneous Pd catalyst for phosphine‐free Suzuki–Miyaura and Heck coupling reactions with excellent turnover number and turnover frequency. The presence of Pd on the silica surface was detected by X‐ray diffraction and the structural morphology of SiO₂@PdNP was obtained by transmission electron microscopy. The heterogeneous catalytic system is recyclable and leaching of the metal after the reaction is not apparently observed. Copyright © 2013 John Wiley & Sons, Ltd.     

The ternary system cerium–palladium–silicon

Phase relations in the ternary system Ce–Pd–Si have been established for the isothermal section at 800 °C based on X-ray powder diffraction and EMPA techniques on about 130 alloys, which were prepared by arc-melting under argon or powder reaction sintering. Eighteen ternary compounds have been observed to participate in the phase equilibria at 800 °C. Atom order was determined by direct methods from X-ray single-crystal counter data for the crystal structures of τ₈—Ce₃Pd₄Si₄ (U₃Ni₄Si₄-type, Immm; a=0.41618(1), b=0.42640(1), c=2.45744(7) nm), τ₁₆—Ce₂Pd₁₄Si (own structure type, P4/nmm; a=0.88832(2), c=0.69600(2) nm) and also for τ₁₈—CePd_1−xSi_x (x=0.07; FeB-type, Pnma; a=0.74422(5), b=0.45548(3), c=0.58569(4) nm). Rietveld refinements established the atom arrangement in the structures of τ₅—Ce₃PdSi₃ (Ba₃Al₂Ge₂-type, Immm; a=0.41207(1), b=0.43026(1), c=1.84069(4) nm) and τ₁₃—Ce_3−xPd_20+xSi₆ (0≤x≤1, Co₂₀Al₃B₆-type, Fm3¯m; a=1.21527(2) nm). The ternary compound Ce₂Pd₃Si₃ (structure-type Ce₂Rh_1.35Ge_4.65, Pmmn; a=0.42040(1), b=0.42247(1), c=1.72444(3) nm) was detected as a high-temperature compound, however, does not participate in the equilibria at 800 °C. Phase equilibria in Ce–Pd–Si are characterized by the absence of cerium solubility in palladium silicides. Mutual solubility among cerium silicides and cerium–palladium compounds are significant whereby random substitution of the almost equally sized atom species palladium and silicon is reflected in extended homogeneous regions at constant Ce-content such as for τ₂—Ce(Pd_xSi_1−x)₂ (AlB₂-derivative type), τ₆—Ce(Pd_xSi_1−x)₂ (ThSi₂-type) and τ₇—CePd_2−xSi_2+x. The crystal structures of compounds τ₄—Ce_~8Pd_~46Si_~46, τ₁₂—Ce_~29Pd_~49Si_~22, τ₁₅—Ce_~22Pd_~67Si_~11, τ₁₇—Ce_~5Pd_~77Si_~18 and τ₁₈—CePd_1−xSi_x (x~0.1) are still unknown.     

Thermal transformation of quaternary compounds in NaF–CaF2–AlF3 system

Details of quaternary compounds formation in the system NaF–CaF₂–AlF₃ are specified. To achieve this aim, the samples of phases NaCaAlF₆ and Na₂Ca₃Al₂F₁₄ have been obtained by high-temperature solid-phase synthesis. Their thermal behavior when heated up to 800 °C has been studied using the methods of high-temperature X-ray diffraction (XRD) and thermal analysis (TA). The system under consideration can be regarded as a quasibinary section CaF₂–NaAlF₄, where at T=745–750 °C invariant equilibrium is implemented with the phases CaF₂–NaCaAlF₆–Na₂Ca₃Al₂F₁₄–(liquid melt)–(NaAlF₄). The peculiarity of the equilibrium is NaAlF₄ metastability at normal pressure. Below the equilibrium temperature the quaternary phase Na₂Ca₃Al₂F₁₄ is stable and NaCaAlF₆ above this temperature. The phase NaCaAlF₆ fixed by rapid quenching from high temperatures and when heated up to 640 °C decomposes, yielding Na₂Ca₃Al₂F₁₄. Further heating in vacuum at temperature up to 740 °C results in decomposition of Na₂Ca₃Al₂F₁₄ into CaF₂ and Na₃AlF₆. The expected reverse transformation of Na₂Ca₃Al₂F₁₄ into NaCaAlF₆ has not been observed under experimental conditions. Transformations in bulk samples reveal direct and reverse transformation of quaternary phases.

Synopsis

Thermal transformation of the quaternary compounds in system (NaF–CaF₂–AlF₃) was investigated using high-temperature X-ray diffraction (XRD) and thermal analysis (TA). In the system the invariant equilibrium is implemented with the phases CaF₂–NaCaAlF₆–Na₂Ca₃Al₂F₁₄–(liquid melt)–(NaAlF₄) at T=745–750 °C.     

Microstructure and Photocatalytic Property of SiO<Subscript>2</Subscript>-TiO<Subscript>2</Subscript> Under Various Process Condition

Nanophase silica-titania particles were prepared by two different synthetic routes, namely, sol–gel and hydrothermal processing. The crystallinity and crystallographic phases, particle size and surface area of the materials were controlled by varying the calcination temperature, and/or the ratio of Si to Ti. It was determined by XRD that the crystallite sizes of SiO₂-TiO₂ prepared by sol–gel and hydrothermal processing decreased from 11 to 6 nm and 12 to 9 nm, respectively, as the mole fraction of silica was increased from 0.1 to 0.4. It is proposed that the presence of the amorphous silica suppresses the growth of anatase TiO₂ grains and their phase transformation to rutile. The photocatalytic decomposition rate of 1,4-dichlorobenzene (DCB) in aqueous solution with the sol–gel derived SiO₂-TiO₂ powder prepared at 750 °C was about 10 ± 5% higher than that observed with Degussa P25, whereas the SiO₂-TiO₂ samples prepared by hydrothermal processing at 250 °C showed a slightly lower decomposition rate than P25.     

Preparation of Silica Microspheres Containing Ag Nanoparticles

Two sol-gel fabrication processes were investigated to make silica spheres containing Ag nanoparticles: (1) a modified Stöber method for silica spheres below 1 m size, and (2) a SiO₂-film formation method on spheres of 3–;7 m size. The spheres were designed to incorporate silver nanoparticles of high ⁽³⁾ in a spherical optical cavity structure for the resonance effect. For the incorporation, interaction between [Ag(NH₃)₂]⁺ ion and Si-OH was important. In the Stöber method, the size of the silica spheres was determined by a charge balance of plus and minus ions on the silica surface. In the film formation method, the capture of Ag complex ion on the silica surface depended on whether the surface was covered with OH groups or not. After doping [Ag(NH₃)₂]⁺ into silica particles or SiO₂ films on the spheres, these ions w ere reduced by NaBH₄ to form silver nanoparticles. From plasma absorption at around 420 nm wavelength and TEM photographs of nanometer-sized silver particles, their formation inside the spherical cavity structures was confirmed.     

The O–H···O, O–H···N and C–H···O hydrogen bonds in 1,4-dimethylpiperazine mono-betaine monohydrate

1,4-Dimethylpiperazine mono-betaine (1-carboxymethyl-1,4-dimethylpiperazinium inner salt, MBPZ) crystallizes as monohydrate. The crystals are orthorhombic, space group Pccn. Two MBPZ molecules and two water molecules form a cyclic oligomer, (MBPZ·H₂O)₂. The O–H···O and O–H···N hydrogen bonds are of 2.769(1) and 2.902(1) Å, respectively. The dimers interact with the neighboring molecules through the C–H···O hydrogen bonds of 3.234(1) Å. The piperazine ring assumes a chair conformation with the N(4)–CH₃ and N⁺(1)–CH₂COO⁻ groups in the equatorial position and the N⁺(1)–CH₃ group in the axial one. The FTIR spectrum is compared with that calculated by the B3LYP/6-31G(d,p) level of theory.     

Formation and characterization of mixed polyelectrolyte–surfactant Langmuir layer templates for silver nanoparticle growth

The hydrophilic characteristic of the polyelectrolyte, poly(4-styrenesulfonic acid) (PSS), was modified by associating with the surfactant, dodecyltrimethylammonium bromide (DTMAB), to form polyelectrolyte–surfactant (PSS–DTMA) Langmuir layers at air/liquid interfaces. The interfacial behavior of the PSS–DTMA complexes was investigated with the Langmuir trough technique. The mixed PSS–DTMA Langmuir layers were then used as the two-dimensional templates to incorporate with silver precursors from the subphase, and were transferred onto mica substrates with the Langmuir–Blodgett (LB) deposition technique. The silver nanoparticles were fabricated in the resulting LB films with UV irradiation, and the morphology of the silver nanoparticle structures was analyzed by atomic force microscopy (AFM). The results indicated that increasing the DTMA⁺ content in the mixed PSS–DTMA system would enhance the hydrophobic characteristic of the complexes and then form stable PSS–DTMA Langmuir layers at interfaces. In addition, by varying the DTMA⁺ content, one could adjust the charge density in the Langmuir layer templates and thus control the association behavior between the two-dimensional templates and the silver precursors in the subphases. The AFM images demonstrated that the formation of the silver nanoparticle structures in the UV-treated LB films could be regulated with the DTMA⁺ content in the Langmuir layer templates. It is inferred that the polyelectrolyte–surfactant template offers a potential of designing structures of polyelectrolyte–nanoparticle materials with a template-synthesis procedure.     

Highly efficient and green oxidation of alkanes and alkylaromatics with hydrogen peroxide catalysed by silver and vanadyl on mesoporous silica‐coated magnetite

A heterogeneous catalyst (FeSi/Ag/VO) based on silver and vanadyl as active sites and mesoporous silica‐coated nanospheres of magnetite (Fe₃O₄@m‐SiO₂) as support was successfully prepared by deposition of Ag nanoparticles and the covalent grafting of vanadyl(IV) acetylacetonate on Fe₃O₄@m‐SiO₂. The catalyst exhibited excellent activity for the oxidation of alkanes, benzene and alkylaromatics using green oxidant H₂O₂ and oxalic acid in acetonitrile at 60 °C.     

TGA–FTIR study of a lead zirconate titanate gel made from a triol-based sol–gel system

A Pb(Zr,Ti)O₃ precursor gel made from a sol prepared using 1,1,1,-tris(hydroxymethyl)ethane, lead acetate and zirconium and titanium propoxides, stabilised with acetylacetone, was analysed using TGA–FTIR analysis. Decomposition under nitrogen (N₂) gave rise to evolved gas absorbance peaks at 215 °C, 279 °C, 300 °C and 386 °C, but organic vapours continued to be evolved, along with CO₂ and CO until 950 °C. The final TGA step in N₂ is thought to relate to decomposition of an intermediate carbonate phase and the final elimination of residues of triol or acetylacetonate species which form part of the polymeric gel structure. By contrast, heating in air promoted oxidative pyrolysis of the final organic groups at ≤450 °C. In air, an intermediate carbonate phase was decomposed by heating at 550 °C, allowing Pb(Zr,Ti)O₃ to be produced some 400 °C below the equivalent N₂ decomposition temperature.     

Synthesis of Silver Selenide Bicomponent Nanoparticles by a Novel Technique: Laser–Solid–Liquid Ablation

A novel laser–solid–liquid ablation technique has been developed to synthesize Ag₂Se nanoparticles from silver nitrate and selenium powder in a mixed solvent of 2-propanol and ethylenediamine. The products were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). The XRD indicated that the products were the single phase of silver selenide. The TEM images revealed that the as-prepared Ag₂Se grains were homogeneous and spherical, and their average size was about 30 nm. This novel technique can be extended to prepare other nanoparticles of various compositions.     

Composition,Enthalpy, and Vaporization Temperature Calculation of Ag‐SiO<Subscript>2</Subscript> Plasmas with Air in the Temperature Range from 1000 to 6000 K and for Pressure Included between 1 and 50 bars

With the Gibbs free energy minimization method, the molar fraction of chemical species are determined in temperature range included between 1000 and 6000 K for several proportions of air, silver and silica and for pressures included between 1 and 50 bars. The enthalpy and the vaporization temperature of liquid silver and liquid silica are studied. The key role of pressure on composition, enthalpy and the vaporization temperature is shown. The electrical neutrality is study, and the importance of ionized gaseous silver at low temperature is shown even for low amount of silver. The increase of electronegative ions (Ag^– and O^–) with pressure is shown. The vapor pressures fitting coefficients of Ag and SiO₂ are given.     

A manganese sulfite with extended metal–oxygen–metal bonds exhibiting hydrogen uptake

A manganese sulfite of the formula Mn₅(OH)₄(SO₃)₃·2H₂O, I{a=7.5759(7) Å, b=8.4749(8) Å, c=10.852(1) Å, β=100.732(2)°, Z=2, space group=P2₁/m (no. 11), R₁=0.0399 and wR₂=0.1121 [for R indexes I>2σ(I)]}, comprising Mn₃O₁₄ units and extended Mn–O–Mn bonds along the three dimensions has been synthesized under hydrothermal conditions. It has narrow channels along the b-axis and exhibits hydrogen storage of 2.1 wt% at 300 K and 134 bar.