一种通过分子间氢键自组装的侧链液晶聚合物

一种通过分子间氢键自组装的侧链液晶聚合物邢佩祥，赵英英，汤心颐，姜炳政（吉林大学化学系，长春，１３００２３）（中国科学院长春应用化学研究所高分子物理开放实验室）关键词氢键，侧链液晶聚合物，近晶相，自组装自Ｒｉｎｇｓｄｏｒｆ［１］等提出在介晶基团与主链...     

微波辐照合成互穿聚合物网络及形态性能研究

微波辐照合成互穿聚合物网络及形态性能研究李卫华，王静媛，李跃先，刘福安，李玉玮，汤心颐（吉林大学化学系，长春，１３００２３）关键词微波辐照，互穿聚合物网络（ＩＰＮｓ），形态性能互穿聚合物网络（ＩＰＮｓ），是一种新型的高分子复合材料，因具有独特的消声、...     

等离子体聚萘薄膜作发光层的蓝色发光二极管

等离子体聚萘薄膜作发光层的蓝色发光二极管马於光，唐建国，张海峰，沈家骢，刘式墉，刘晓东（吉林大学分子光谱与分子结构开放实验室，集成光电子学国家重点实验室，长春，１３００２３）（白求恩医科大学）关键词等离子体聚合物，蓝光，发光二极管Ｂｕｒｒｏｕｇｈｅｓ...     

聚丙烯酸酯/聚苯乙烯乳胶互穿聚合物网络阻尼性能的研究

聚丙烯酸酯／聚苯乙烯乳胶互穿聚合物网络阻尼性能的研究刘瑞瑛王静媛韩庆国李玉玮汤心颐（吉林大学化学系长春１３００２３）关键词互穿聚合物网络，聚丙烯酸酯，聚苯乙烯，阻尼性能，乳胶自１９６９年Ｓｐｅｒｌｉｎｇ和Ｆｒｉｓｃｈ分别发展了ＭｉｌａｒＩＰＮ的...     

叔丁基联苯基苯基噁二唑作空穴限制层的掺杂聚合物蓝光发光二极管

叔丁基联苯基苯基噁二唑作空穴限制层的掺杂聚合物蓝光发光二极管马於光,吴军,薛善华,黄劲松,田文晶,刘式墉,沈家骢,刘晓冬（吉林大学分子光谱与分子结构开放实验室,集成光电子学国家重点实验室,长春,１３００２３）（白求恩医科大学基础部）关键词聚合物,发光...     

倒浮萍聚合物LB膜的有序－无序相变研究

倒浮萍聚合物ＬＢ膜的有序－无序相变研究李宏斌，张希，张瑞丰，赵冰，徐尉青，沈家骢，高忠民（吉林大学分子光谱与分子结构开放实验室、化学系，分析测试中心，长春，１３００２３）关键词聚合物ＬＢ膜，有序－无序相变，变温红外光谱，变温小角Ｘ光衍射ＬＢ膜的有序－...     

硫化镉钠米微粒在聚合物网络中的组装

硫化镉钠米微粒在聚合物网络中的组装黄金满，杨毅，杨柏，刘式墉，沈家骢（吉林大学分子光谱与分子结构重点实验室、集成光电子国家重点实验室，长春，１３００２３）关键词组装，纳米微粒，离子交换，透射电子显微镜，电子衍射由于纳米半导体微粒的物理和化学性质介于分...     

染料掺杂聚合物电注入发光材料的激发态稳定性

染料掺杂聚合物电注入发光材料的激发态稳定性田文晶,马於光,吴英,薛善华,刘式墉,沈家骢（吉林大学分子光谱与分子结构开放实验室、集成光电子学国家重点联合实验室,长春,１３００２３）关键词染料掺杂聚合物,电注入发光,荧光光谱,ＵＶ－Ｖｉｓ吸收谱自英国剑桥...     

手性席夫碱型液晶化合物的合成与表征

手性席夫碱型液晶化合物的合成与表征田颜清，林凤，赵英英，汤心颐，苏峰煜，赵晓光，周恩乐（吉林大学化学系长春１３００２３）（中国科学院长春应用化学研究所长春）关键词近晶相液晶，手性液晶，席夫碱，合成，表征自从１９７５年Ｍｅｙｅｒ等［１］首次合成铁电液晶...     

拉曼光谱研究稀土离子及其配合物对DPPE双分子层脂链结构的影响

拉曼光谱研究稀土离子及其配合物对ＤＰＰＥ双分子层脂链结构的影响赵冰（吉林大学分子光谱与分子结构开放实验室长春１３００２３）袁春波，赵大庆，倪嘉缵（中国科学院应用化学研究所稀土化学与物理开放实验室长春１３００２２）随着稀土在工农业和医疗保健上的广泛应用...     

MULTILAYER ORGANIC LEDS BASED ON A NEW DYE-DOPED POLYMER*

A blue dye, l-benzothiazoly-3-phenyl-pyrazoline (BTPP) was found to function as bright lightemitting dye in organic electroluminescent devices. This heterocyclic compound exhibits good characteristicsof blue photoluminescence and electroluminescence, which has emission peak at 445 nm.The thin films offluorescent dye dispersed in poly(N-vinylcarbazole) (PVK) could serve as light-emitting layers in multilayerorganic LEDs. 2-(4-Biphenyl)-5-(4-tert-butylpheynyl)-1,3,4-oxadiazole (PBD) and tris-(8-hydroxyquinoline)aluminum (Alq3) were introduced into double-layer and three-layer devices respectively. The introduction ofelectron transport material Alq_3 enhanced the electron injection and luminous efficiency, as compared withdouble-layer devices. Maximum brightness and luminous efficiency can be reached up to 190 cd/m~2 and0.31 m/W, respectively.     

Blue-light emitting diodes and flat display based on poly(p-phenylenevinylene) copolymers

Ｐｏｌｙｍｅｒｉｃｌｉｇｈｔｅｍｉｔｔｉｎｇｄｉｏｄｅｓ(ＬＥＤｓ)ｈａｖｅｄｒａｗｎｃｏｎｓｉｄｅｒａｂｌｅａｔｔｅｎｔｉｏｎｆｏｒｔｈｅｉｒｐｏｓｓｉｂｌｅａｐｐｌｉｃａｔｉｏｎｓｉｎｌａｒｇｅａｒｅａｆｌａｔｐａｎｅｌｄｉｓｐｌａｙｓｉｎｃｅｔｈｅ1990ｓｗｈｅｎａｇｒｏｕｐａｔＣａｍｂｒｉｄｇｅＵｎｉｖｅｒｓｉｔｙ[1]ｒｅｐｏｒｔｅｄｔｈａｔｐｏｌｙ(ｐｐｈｅｎｙｌｅｎｅｖｉｎｙｌｅｎｅ)(ＰＰＶ)ｅｘｈｉｂｉｔｓｅｌｅｃｔｒｏｌｕｍｉｎｅｓｃｅｎｃｅ.Ｓｉｇｎｉｆｉｃａｎｔｉｍｐｒｏｖｅｍｅｎｔ…     

氟化吡唑啉蓝色电致发光器件的制备

自从Tang等[1]首次报道了多层有机电致发光器件以来, 人们研究了大量的新型材料[2,3], 其中较吸引人的方法是将高量子产率的荧光染料掺杂于传输层中制备电致发光器件[4～9]. 三芳基吡唑啉化合物具有较高的荧光产率和蓝色发射特性. 这些化合物具有分子内电荷传输性能, 在激发状态下分子可发生扭曲形成电子给体-受体结构[10], 因此在EL器件制备过程中既可以作为载流子传输材料, 又可以作为发光材料来应用. 虽然吡唑啉类化合物在固态下具有空穴传输特性[11], 也有较高的荧光产率, 但它们的玻璃转化转变温度较低, 在制备EL器件时, 如单独作为传输层或发射层时, 该类材料易于结晶, 从而使得器件的性能快速衰减. 如果将它们分散于聚合物等主体中, 就会避免重结晶问题. 我们在三苯基吡唑啉中引入强吸电子基团CF3, 导致分子的刚性增强和荧光强度增加, 熔点升高. 将氟化三苯基吡唑啉(FTPP)作为发光中心制作了两类EL器件, 均获得蓝光发射. FTPP分子结构见图1.     

稀土配合物Eu(TTA)4C5H5NC16H33的红光二极管

A thin film electroluminescence cell with the structure of ITO/PPV/PVK∶Eu(TTA)₄C₅H₅NC₁₆H₃₃∶PBD/Alq₃/Al has been fabricated. Red emission with a very sharp spectral band at 614nm was observed and a maximum luminance of 20cd·m^-2 at 36V was obtained from the spin-coated device. The full width at half maximum of lu-minescent spectrum is less than 10nm.     

不同电子传输层的蓝光有机电致发光器件的性能研究

自从Tang等^[1]首次报道多层有机电致发光器件（OLED）以来,其在亮度和效率上有了质的飞跃,表明器件的结构对提高发光亮度和发光效率起着至关重要的作用,单层器件虽然具有制作简单的优点,但却存在明显缺点：（1）复合发光区靠近金属电极,该处缺陷很多,非辐射复合几率大,导致器件效率降低;（2）由于两种载流子注入不平衡,载流子的复合几率较低,因而影响器件的发光效率,要使发光层中具有高的载流子辐射复合效率,两种载流子的注入及传输能力应相当,否则传输快的一方就会直接穿过发光层到达对电极被猝灭,平衡电子和空穴的注入与传输可通过在电极和发光层之间加入载流子输运层或限制层制作多层器件的途径来实现,基于上述考虑,我们以PPCP为发光层（PPCP是一种荧光效率较高的蓝光材料^[2-4],对其进行深入研究尚未见有文献报道＿,设计了4种不同电子传输层（ETL)的三层 结构的OLED,为研究电子传输层对器件性能的影响,我们还制备了不含电子传输层的双层器件,结果表明,通过选择合适的ETL,OLED的发光亮度及发光效率会有很大程度的改善。     

ACTION SPECTRA FOR PHOTOTROPIC BALANCE IN Phycomyces blakesleeanus: DEPENDENCE ON REFERENCE WAVELENGTH and INTENSITY RANGE

Abstract— Action spectra for phototropic balance of Phycomyces blakesleeanus sporangiophores were measured for various reference wavelengths and intensity ranges. Balance action spectra were made at fluence rates of 10^-4 W m^-2 with reference wavelengths of 450 nm, 394 nm, 507 nm, and broadband blue light. For broad-blue light and 450 nm light as references, typical flavin-like action spectra were found with a ma jor peak at 455 nm, a secondary peak at 477 nm, and a minor peak at 383 nm; these peaks are wider for broad blue than for 450 nm light. With the 394 nm reference, there is a major peak at 455 nm, a secondary peak at 477 nm and a minor peak at 394 nm. An action spectrum with 507 nm reference has a major peak at 455 nm and a minor peak at 383 nm, but no peak at 477 nm. A balance action spectrum was made with 450 nm reference light near threshold intensity (2 times 10^-8 W m^-2); there, the 386 nm peak is greatly reduced, while the 455 nm peak is enhanced. The intensity dependence of the 386 nm peak was studied in detail for reference light of 450 nm. We found that the relative quantum efficiency of the 386 nm light increases with the logarithm of the 450 nm fluence rate; in the high intensity range (0.3 W m^-2) the relative quantum efficiency of the 386 nm light is 1.3 and approaches zero at 10^-9 W m^-2. These findings indicate that P. blakesleeanus phototropism is mediated by multiple interacting pigments or by a photochromic photoreceptor.     

输运层厚度对双层有机器件复合发光的影响

采用ITO/PVK/Alq/Al双层电致发光(EL)结构,制备了三种载流子输运层厚度分别为30、 60、 120 nm,发光层厚度均为300 nm的有机薄膜EL器件,测试其EL谱及J-V特性曲线.根据有机EL器件中载流子的产生和输运过程导出了载流子复合几率及电子和空穴密度分布表示式,用以解释其发光强度随输运层厚度的变化关系,用一维无序结构载流子随机跃迁模型讨论输运层厚度对器件电流密度及启动电压的影响,探讨了载流子在薄膜中的输运过程,其理论与实验符合得很好.     

超薄层在白色有机电致发光器件中的应用

以DCJTB为掺杂剂, 以BCP为空穴阻挡层, 研究了两种结构的有机电致发光器件ITO/NPB/BCP/Alq3:DCJTB/Alq3/Al(结构A)和ITO/NPB/BCP/Alq3/Alq3:DCJTB/Alq3/Al(结构B)的电致发光光谱. 实验结果显示, 在结构A器件的电致发光光谱中, 绿光的相对发光强度较弱,增加Alq3层的厚度对绿光的相对发光强度的影响也很小; 而在结构B器件的电致发光光谱中, BCP层与掺杂层(Alq3:DCJTB)之间的Alq3薄层对绿光的相对发光强度影响显著, 用很薄的Alq3层就可以得到强的绿光发射. 进一步改变器件结构, 利用有机超薄层就可以得到稳定的白光器件ITO/NPB(50 nm)/BCP(3 nm)/Alq3(3 nm)/Alq3:DCJTB(1%(w))(5 nm)/Alq3(7 nm)/Al. 随着电压的增加(14-18 V), 该器件的色坐标基本保持在(0.33, 0.37)处不动; 在432 mA·cm-2的电流密度下, 该器件的发光亮度可达11521 cd·m-2.     

DYES AND DYE MIXTURES USEFUL FOR GENERATION OF UV IN A FLASHLAMP DRIVEN TUNABLE DYE LASER

Abstract— We have used a flashlamp driven tunable dye laser combined with angle tuned frequency doubling crystals for producing UV-B radiation for action spectra studies of various organisms. Optimum UV-B power generation is needed to provide biologically effective doses at wavelengths greater than 300 nm. Optimizing power will also serve to lengthen the lifetime of dyes and other laser components at shorter wavelengths where UV-B output is more than adequate. While much information is available on dyes and dye performance from manufacturers, little information is available on the use of dyes and dye mixtures for providing the continuous high power spectrum of wavelengths necessary for biological UV action spectroscopy. We have examined a number of dyes and dye mixtures for optimal laser performance at wavelengths from 260 to 330 nm. The dyes and dye mixtures discussed here provide adequate power output in the UV-B wavelength range and have allowed us to perform numerous UV-B action spectra studies using the tunable dye laser.     

Visible-spectroscopy study of the adsorption of alizarinate by Al-montmorillonite in aqueous suspensions and in solid state

The adsorption of the monovalent anionic dye alizarinate onto Na- and Al-montmorillonite was carried out by adding the dye into aqueous clay suspensions. Electronic spectra of aqueous suspensions and of air-dried dye-clay complexes were studied. Na-montmorillonite adsorbed only part of the added dye. With total amount of alizarinate up to 5 mmol dye per 100 g clay the adsorption of the dye takes place on the broken bonds, leading to peptization of the clay. Al-montmorillonite adsorbed alizarinate completely up to 10 mmol per 100 g clay. Above this loading there was a partition of the dye between the clay and the supernatant. The maximum adsorption for Na- and Al-clay was 4 and 25 mmol dye per 100 g clay, respectively. Absorption bands in the spectrum of Al-montmorillonite suspensions (488-504 nm) appear at longer wavelengths than in the spectrum of air-dried Al-montmorillonite (415-455 nm). Thermo-X-ray study of these clay-alizarinate complexes suggests that the organic compound was located in the interlayer space in Al-montmorillonite but was not located there in Na-montmorillonite. In Al-montmorillonite alizarinate formed a coordination complex with exchangeable Al(3+). In Na-montmorillonite it formed bonds with Al exposed on the broken-bonds sites.