Temperature-dependent and friction-controlled electrochemically induced shuttling along molecular strings associated with electrodes.

The temperature and solvent composition dependence of the electrochemically stimulated rate of shuttling of the redox-active cyclophane, cyclobis(paraquat-p-phenylene), on a molecular string has been studied. The molecular string includes a pi-donor diiminebenzene-site that is associated on one side with an electrode, and stoppered on the other side with an adamantane unit. The cyclophane rests on the pi-donor site, owing to stabilizing pi-donor-acceptor interactions. Electrochemical reduction of the cyclophane units, to the bis-radical cation cyclophane, results in the shuttling of the reduced cyclophane towards the electrode, a process that is driven by the removal of the stabilizing donor-acceptor interactions, and the electrostatic attraction of the reduced product by the electrode. The latter process is energetically downhill, and is temperature-independent. Upon oxidation of the reduced cyclophane that is associated with the electrode, the energetically uphill shuttling of the oxidized cyclophane to the pi-donor site proceeds. The rate of this translocation process has been found to be temperature-dependent, and controlled by the solvent composition. The experimental results have been theoretically analyzed in terms of Kramers' molecular friction model. The theoretical fitting of the experimental results, using solutions of variable composition, reveals that the rate-constants for the uphill reaction in a pure aqueous solution follow the temperature-dependence of the viscosity of water. The results demonstrate the significance of friction phenomena in shuttling processes within molecular machines.     

A Chemically and Electrochemically Switchable [2]Catenane Incorporating a Tetrathiafulvalene Unit

A mechanical switch in a [2]catenane , made up of a cyclobis(paraquat-p-phenylene) tetracation interlocked with a macrocyclic polyether containing a redox-active tetrathiafulvalene (TTF) unit and a 1,5-dioxynaphthalene ring system, can be thrown either chemically or electrochemically. The neutral TTF unit resides “inside” the tetracationic cyclophane in the reduced state and “alongside” it in the oxidized species (TTF⁺/ TTF²⁺). Switching between the reduced (I⁴⁺) and oxidized state (I⁵⁺(I⁶⁺)) is accompanied by a dramatic color change.     

Modular synthesis of pi-acceptor cyclophanes derived from 1,4,5,8-naphthalenetetracarboxylic diimide and 1,5-dinitronaphthalene

Three neutral cyclophanes were synthesized, and their association with indole, an aromatic pi-donor, was studied. The cyclophanes were designed to contain a rigid, hydrophobic binding cavity with 1,4,5,8-naphthalenetetracarboxylic diimide or 1,5-dinitronaphthalene as the pi-acceptor. Two of the cyclophanes also contain a (S)-(valine-leucine-alanine) tripeptide unit to provide chiral hydrogen bonding interactions with guest molecules. Despite the fact that these cyclophanes contain a hydrophobic binding cavity of appropriate dimensions, their association with indole is very weak. In the case of cyclophanes derived from 1,5-dinitronaphthalene, steric interactions force the nitro groups out of the plane of the naphthalene ring, diminishing their effectiveness as pi-acceptors. A simple UV--visible titrimetric method, using N,N,N',N'-tetramethyl-1,4-phenylenediamine (TMPD) as a pi-donor, was used to rank the pi-acceptor strength of these and other aromatic units. These titrations show that 1,4,5,8-naphthalenetetracarboxylic diimide and 1,5-dinitronaphthalene derivatives are weaker pi-acceptors than viologens, which make good pi-acceptor cyclophanes. Methyl viologen is in turn a weaker pi-acceptor than anthaquinone disulfonate, suggesting that the latter may serve as a useful building block for pi-accepting cyclophane hosts.     

Hexaaminobenzene derivatives: synthesis and unusual oxidation behavior

The syntheses and the electrochemical behavior of the monomeric peralkylated hexaamino(1,3)metacyclophane 4, the dimeric dodecaamino(1,3)cyclophane 5a, and the dodecaamino(1,3,5)cyclophane 6 are described. Electrochemical measurements show that the hexaaminobenzene units in 4 and 5a undergo an unusually slow two-electron transfer attributed to the deformation of the rings into bis-cyanine cations when oxidized to the respective dication. Further oxidations to tri-, tetra-, and hexacationic units occur at more positive potentials. In the dimeric structures, no interaction between the rings can be seen in the (1,3)cyclophane, but strong interaction for the (1,3,5)cyclophane is observed.     

Spatially Confined Assembly of Monodisperse Ruthenium Nanoclusters in a Hierarchically Ordered Carbon Electrode for Efficient Hydrogen Evolution

The redox units of polyaniline (PAni) are used cooperatively, and in situ, to assemble ruthenium (Ru) nanoclusters in a hierarchically ordered carbon electrode. The oxidized quinonoid imine (QI) units in PAni bond Ru complex ions selectively, whereas reduced benzenoid amine (BA) units cannot. By electrochemically tuning the ratio of QI to BA, Ru complexes are spatially confined in the outer layer of hierarchical PAni frameworks. Carbonization of Ru‐PAni hybrids induces nucleation on the outer surface of the carbon support, generating nearly monodisperse Ru nanoclusters. The optimized catalyst has a low loading of approximately 2 wt % Ru, but exhibits a mass activity for the hydrogen evolution reaction that is about 6.8 times better than commercial 20 wt % Pt/C catalyst.     

Triplet-sensitized photolysis of the photoisomer of a 2,11-diaza[3,3](9,10)anthracenoparacyclophane: an adiabatic cycloreversion and a [2pia + 2pia + 2sigmas] rearrangement in a triplet state of the biplanophane system

The triplet-sensitized photoreactions of the title biplanophane system 6, the photoisomer of a 2,11-diaza[3,3](9,10)anthracenoparacyclophane derivative 5, were investigated by stationary and laser-flash photolyses using xanthone (XT) and benzophenone (BP) as triplet sensitizers. When photoisomer 6 underwent XT-sensitized irradiation, a triplet cyclophane 5 and a novel polycyclic product 7 were obtained via an adiabatic cycloreversion and a formal [2pia + 2pia + 2sigmas] rearrangement, respectively. The maximum quantum yield for the formation of cyclophane 5 (0.69) and the upper-limit efficiency for the formation of polycycle 7 (0.31) were determined by laser photolysis techniques. For BP-sensitized photolysis of photoisomer 6, oxetane 8, in addition to triplet cyclophane 5 and polycycle 7, was formed by a Paterno-Buchi reaction. The quenching rate constant (k(q)) of triplet BP by photoisomer 6 (3.4 x 10(8) dm(3) mol(-)(1) s(-)(1)) was found to be 1 order of magnitude smaller than that for XT (5.0 x 10(9) dm(3) mol(-)(1) s(-)(1)). On the basis of the relationship between k(q) and the triplet donor-acceptor energy gap, the triplet energy level of photoisomer 6 was estimated to be approximately 71 kcal mol(-)(1). The photochemical and the photophysical processes involved in the sensitized photolyses are summarized in an energetic reaction diagram and discussed in detail.     

Supramolecular assembly of 2,7-dimethyldiazapyrenium and cucurbit[8]uril: a new fluorescent host for detection of catechol and dopamine

The formation of a highly stable inclusion complex between 2,7-dimethyldiazapyrenium (Me(2)DAP(2+)) and the cucurbit[8]uril host (CB8) was demonstrated by X-ray crystallography; MALDI-TOF mass spectrometry; and (1)H NMR, electronic absorption, and emission spectroscopy. The equilibrium association constant was determined to be 8.9(+/-0.2)x10(5) L mol(-1) from UV-visible data and 8.4(+/-1.5) x 10(5) L mol(-1) from fluorescence data. The Me(2)DAP(2+).CB8 inclusion complex acted as a host to bind compounds containing aromatic pi-donor moieties (D), such as catechol and dopamine. This point was demonstrated by (1)H NMR spectroscopy, and electrochemical and emission measurements. Fluorescence detection of the Me(2)DAP(2+).D.CB8 ternary complexes was evident in aqueous solution and on the surface of silica particles, to which fluorescent diazapyrenium units had been covalently immobilized.     

A photoactive molecular triad as a nanoscale power supply for a supramolecular machine

A tetrathiafulvalene-porphyrin-fullerene (TTF-P-C(60)) molecular triad, which generates electrical current by harnessing light energy when self-assembled onto gold electrodes, has been developed. The triad, composed of three unique electroactive components, namely, 1) an electron-donating TTF unit, 2) a chromophoric porphyrin unit, and 3) an electron-accepting C(60) unit, has been synthesized in a modular fashion. A disulfide-based anchoring group was tagged to the TTF end of the molecule in order to allow its self-assembly on gold surfaces. The surface coverage by the triad in a self-assembled monolayer (SAM) was estimated to be 1.4 nm(2) per molecule, a density which is consistent with hexagonal close-packing of the spherical C(60) component (diameter approximately 1 nm). In a closed electronic circuit, a triad-SAM functionalized working-electrode generates a switchable photocurrent of approximately 1.5 microA cm(-2) when irradiated with a 413 nm Kr-ion laser, a wavelength which is close to the porphyrin chromophore's absorption maximum peak at 420 nm. The electrical energy generated by the triad at the expense of the light energy is ultimately exploited to drive a supramolecular machine in the form of a [2]pseudorotaxane comprised of a pi-electron-deficient tetracationic cyclobis(paraquat-p-phenylene) (CBPQT(4+)) cyclophane and a pi-electron-rich 1,5-bis[(2-hydroxyethoxy) ethoxy]naphthalene (BHEEN) thread. The redox-induced dethreading of the CBPQT(4+) cyclophane from the BHEEN thread can be monitored by measuring the increase in the fluorescence intensity of the BHEEN unit. A gradual increase in the fluorescence intensity of the BHEEN unit concomitant with the photocurrent generation, even at a potential (0 V) much lower than that required (-300 mV) for the direct reduction of the CBPQT(4+) unit, confirms that the dethreading process is driven by the photocurrent generated by the triad-SAM.     

基于门控制电催化效应的分子印迹传感器

以绿麦隆为模板分子,在镍电极表面聚合制得绿麦隆分子印迹膜。洗脱后的分子印迹膜重新吸附不同浓度绿麦隆分子,在印迹膜上形成不同量的印迹孔穴,H2O2通过印迹孔穴在镍电极表面产生电催化氧化,从而形成门控制电催化效应,以此对绿麦隆进行定量分析。研究表明,镍电极对H2O2有较好的催化效果,分子印迹聚合膜中模板分子、功能单体和交联剂的摩尔配比为1∶12∶30,重吸附时间为10 min,测试缓冲液pH=7.2。H2O2的催化电流值与绿麦隆浓度在1.0×10-4～4.0×10-7 mol/L范围内呈良好的线性关系;检出限为2.9×10-8 mol/L。将传感器应用于农田水样的检测,其回收率在97%～103%之间。     

电化学调制时间分辨紫外可见光谱技术及其在电显色研究中的应用

A new electrochemically modulated time resolved uv/vis spectroscopic(EMTRUV/VS) technique based on optical multienannel analyzer (OMA) has been presented. EM-TRUV/VS measurement apparatus consists of five units: an optical signal detection unit which includes a detector, a polychromator, a detector module; an optics unit; a spe-ctroelectrochemical cell unit, which includes optical transparent electrode (OTE); an electrochemical control unit. The limit of time resolution can reach the order of ms by continuously scanning mode and the order of μs by gate mode which is suitable to reversible system with respect to a potential change, respectively. A high S/N ratio can be obtained by subtractive spectrum method. The electrochromism of a poly-o-phenylenediamine (POPD)-coated Au OTE in aqueous 1 mol·L~(-1) H_2SO_4 solution was studied by EMTRUV/VS technique. The optical absorption (λ_(max)=550 nm) of oxidized POPE is ascribed to n→π* transition. The time resolved spectra acquired suggest that the oxidation reaction of PDPD occurs during the first 500 μs and that the electrochromism is controled by H~+ transport.     

Construction and analytical application of a biosensor based on stearic acid-graphite powder modified with sweet potato tissue in organic solvents

A biosensor based on stearic acid-graphite powder modified with sweet potato (Ipomoea batatas (L.) Lam.) tissue as peroxidase source was constructed and applied in organic solvents. Several parameters were studied to evaluate the performance of this biosensor such as stearic acid-graphite powder and tissue composition, type and concentration of supporting electrolyte, organic solvents, water/organic solvent ratio (% v/v) and hydrogen peroxide concentration. After selection of the best conditions, the biosensor was applied for the determination of hydroquinone in cosmetic creams in methanol. At the peroxidase electrode hydroquinone is oxidized in the presence of hydrogen peroxide and the radical formed was reduced back electrochemically at -180 mV vs Ag/AgCl (3.0 mol L(-1) KCl). The reduction current obtained was proportional to the concentration of hydroquinone from 6.2 x 10(-5) to 1.5 x 10(-3) mol L(-1) (r = 0.9990) with a detection limit of 8.5 x 10(-6) mol L(-1). The recovery of hydroquinone from two samples ranged from 98.8 to 104.1% and an RSD lower than 1.0% for a solution containing 7.3 x 10(-4) mol L(-1) hydroquinone and 1.0 x 10(-3) mol L(-1) hydrogen peroxide in 0.10 mol L(-1) tetrabutylammonium bromide methanol-phosphate buffer solution (95:5% v/v) (n = 10) was obtained.     

Reversible condensation of DNA using a redox-active surfactant

We report characterization of aqueous solutions of dilute Lambda phage DNA containing the redox-active surfactant (11-ferrocenylundecyl)trimethylammonium bromide (FTMA) as a function of the oxidation state of the FTMA. FTMA undergoes a reversible one-electron oxidation from a reduced state that forms micelles in aqueous solution to an oxidized state (containing the ferrocenium cation) that does not self-associate in solution. This investigation sought to test the hypothesis that FTMA can be used to achieve reversible control over the conformation of DNA-surfactant complexes in solution. Whereas DNA adopts extended coil conformations in aqueous solutions, our measurements revealed that addition of reduced FTMA (2-5 microM) to aqueous solutions of DNA (5 microM in nucleotide units) resulted in coexistence of extended coils and compact globules in solution. At higher concentrations of reduced FTMA (up to 30 microM), the DNA was present as compact globules only. In contrast, oxidized FTMA had no measurable effect on the conformation of DNA, allowing DNA to maintain an extended coil state up to a concentration of 75 microM oxidized FTMA. We further demonstrate that it is possible to chemically or electrochemically transform the oxidation state of FTMA in preformed complexes of FTMA and DNA, thus achieving in situ control over the conformations of the DNA in solution. These results provide guidance for the design of surfactant systems that permit active control of DNA-surfactant interactions.     

Studies on the electrochemical behavior of cytochrome c and its interaction with DNA at a Co/GC ion implantation modified electrode

The electrochemical behavior of cytochrome c (cyt c) and its interaction with DNA at a Co/glassy carbon (GC) ion implantation modified electrode were studied by linear sweep and cyclic voltammetry. In 0.005 mol dm(-3) Tris-0.05 mol dm(-3) NaCl buffer solution (pH = 7.10), a sensitive reduction derivative peak of cyt c was obtained by linear sweep voltammetry. The peak potential was 0.032 V (SCE). The peak current was proportional to the concentration of cyt c. The electrode process was quasi-reversible with adsorption. The electrode reaction rate constant k and the electron transfer coefficient a of cyt c were 4.42 s(-1) and 0.47, respectively. AES and XPS experiments showed that Co was implanted into the surface of the GC electrode (GCE). The implanted Co formed Co-C, which catalyzed the reduction of cyt c. The reaction of DNA with cyt c led to an electrochemically active complex, which resulted in an increase in the reduction current of cyt c. After adding DNA into the solution containing cyt c, the electrode process was still quasi-reversible with adsorption.     

镍离子注入修饰电极上米托蒽醌与DNA相互作用的电化学研究

研究了在镍离子注入修饰电极和0.05mol/LTris-0.5mol/LNaCl缓冲溶液(pH=7.1)中,米托蒽醌(MX)与DNA作用的电化学.在37℃恒温1.5h条件下,MX与DNA形成一种非电活性的结合物,使MX峰电流降低,其结合比n(MX):n(DNA)=2:1,结合常数为1.61×10¹²,电子转移系数为0.41,电极反应速率常数0.33s^-1.加入DNA后,MX峰电流降低,据此,可以测定DNA.     

钴膦基元化合物的电化学行为

近年来，随着硫、脚混配配位化学的迅猛发展，有机卿参与的过渡金属流基化合物正在受到越来越多的重视［‘，’］．有机磷的参与增加了金属硫基配合物的多样性，推动了金属流基配位体系的合成化学和结构化学的发展．Co（PPh3hCI。和Co（PPha）aCI（PPh。为三苯基磷）是重要的含     

Temperature induced rotation in a [4.4]cyclophane

The synthesis, the X-ray, NMR and molecular modeling structure determination of a new orthopara[4.4]cyclophane are reported. The similarity of the π(CO)-π(Ar) driven conformational equilibrium of this compound to the work of an amusement ride machinery is also revealed.     

Versatile self-complexing compounds based on covalently linked donor-acceptor cyclophanes

A range of covalently linked donor-acceptor compounds which contain 1) a hydroquinone (HQ) unit, 2) a 1,5-dioxynaphthalene (DNP) ring system, or 3) a tetrathiafulvalene (TTF) unit as the pi-donor, and 4) cyclobis(paraquat-p-phenylene) (CBPQT(4+)) as the pi-accepting tetracationic cyclophane were prepared and shown to operate as simple molecular machines. The pi-donating arms can be included inside the cyclophane in an intramolecular fashion by virtue of stabilizing noncovalent bonding interactions. What amounts to self-complexing/decomplexing equilibria were shown to be highly temperature dependent when the pi-donating arm contains either an HQ or DNP moiety. The thermodynamic parameters associated with the equilibria have been unraveled by using variable-temperature (1)H NMR spectroscopy. The negative DeltaH degrees and DeltaS degrees values account for the fact that the "uncomplexed" conformation becomes the dominant species, since the entropy gain associated with the decomplexation process overcomes the enthalpy loss resulting from the breaking of the donor-acceptor interactions. The arm's in-and-out movements with respect to the linked cyclophanes can be arrested by installing a bulky substituent at the end of the arm. In the case of compounds carrying a DNP ring system in their side arm, two diastereoisomeric, self-complexing conformations are observed below 272 K in hexadeuterioacetone. By contrast, control over the TTF-containing arm's movement is more or less ineffective through the thermally sensitive equilibrium although it can be realized by chemical and electrochemical ways as a result of TTF's excellent redox properties. Such self-complexing compounds could find applications as thermo- and electroswitches. In addition, the thermochromism associated with the arm's movement could lead to some of the compounds finding uses as imaging and sensing materials.     

基于三维纳米银修饰电极的硝酸根微型传感芯片研究

研制一种基于金叉指微电极阵列(IDA)的电流型硝酸根离子(NO-3)微传感电极芯片.基于微机电系统(Micro-Electro-Mechanical Systems,MEMS)工艺制备金IDA微电极,通过电化学沉积技术在IDA微电极表面修饰三维枝状结构纳米银敏感膜,利用敏感膜对硝酸根离子良好的电催化还原性能,采用脉冲方波伏安(SWV)电化学测量方法,实现对硝酸根离子在25～1000μmol/L浓度范围内的快速检测,灵敏度达9.5 nA/(μmol/L),线性度为99.98%,检测下限为10μmol/L.考察水体中常见的NO-2,F-,3PO 4-,SO 42-,2CO3-,NH+4,Na+和K+等离子对该传感芯片的干扰性能,传感芯片表现出较好的抗干扰性能.制备的三维枝状结构纳米银修饰IDA微电极可实现水环境(pH 5.0～9.0)中NO-3的电化学检测,对应用于自然水环境中硝酸根离子的现场检测具有积极意义.     

A photoswitchable rotaxane with a folded molecular thread

Novel [2]rotaxanes containing the tetracationic cyclophane cyclobis(paraquat-4,4-biphenylene) and a dumbbell-shaped molecular thread incorporating a photoactive diarylcycloheptatriene station as well as a photoinactive anisol station have been synthesized with yields of nearly 50 % by the alkylative endcapping method. The rotaxane was transformed into the related rotaxane incorporating a diaryl tropylium unit by electrochemical oxidation. The precursor of the cycloheptatrienyl rotaxane, the related pseudorotaxane, and the rotaxanes incorporating the diarylcycloheptatriene and the corresponding tropylium unit were characterized by (1)HNMR spectroscopy and UV/Vis spectroscopy. According to the NMR spectra, both the cycloheptatriene and the tropylium rotaxane possess a folded conformation enabling the tetracationic cyclophane to interact with two stations. The diarylcycloheptatriene station is incorporated inside the cavity of the cyclophane and the anisol station resides alongside the bipyridinium unit of the cyclophane. In contrast, the anisol station is inside the cyclophane in the tropylium rotaxane. The exchange between both conformations can be achieved by introducing the methoxy leaving group into the cycloheptatriene ring; the tropylium rotaxane is generated by photoheterolysis of this methoxy-substituted rotaxane, which reacts thermally back to the cycloheptatriene rotaxane, thus closing the switching cycle. These induced conformational changes achieve a so-called molecular machine.     

Voltammetric determination of cadmium(II) using a chemically modified electrode

An 1-(pyridylazo)-2-naphthol modified glassy carbon electrode has been investigated as sensor for the measurement of trace levels of Cd2+. Cd2+ is deposited on the surface of a PAN modified glassy carbon electrode at -1.10 V (vs. SCE) via forming Cd2+-PAN and subsequent reduction at the electrode. In the following step, Cd-PAN is oxidized, and voltammograms are recorded by scanning the potential in a positive direction. Calibration plots were found to be linear in the range 2 x 10(-8) mol/L to 8 x 10(-7) mol/L. The detection limit was 5 x 10(-10) mol/L, and the coefficient of variation, determined on one single electrode at a concentration of 5 x 10(-7) mol/L, was calculated to be 3.2% (n = 5). Using this new kind of modified electrode, trace levels of Cd(II) in water samples were determined; the average recovery was calculated to be 98.78%.