Analysis of short crack growth from microscopic fatigue properties

Successful simulation of kinetics of small fatigue crack growth entails three aspects: Stage I, Stage II growth rate prediction and transition prediction. In this paper attention is focused on growth rate predictions. By using microstructurally-affected-zone and process zone concepts, microscopic fatigue behaviour of small fatigue crack propagation is logically linked with macroscopic fatigue behaviour, showing an intrinsic relation between small fatigue crack growth and macroscopic low-cycle fatigue properties during crack growth. Furthermore, variation of relatively big plastic zone size associated with a growing small fatigue crack is kinetically simulated. As a result a quantitative prediction model of growth rates for Stage I and Stage II growth has been developed whose explicit advantage is that the growth rate of small fatigue crack can now be predicted in terms of bulk fatigue properties in conjunction with local microstructural characteristics.     

Evolution of fatigue damage using the fatigue damage map method

Using only readily available material properties and the concept of the fatigue damage map the work attends to develop a methodology able to predict crack tip propagation rates characterising each of the fatigue stages, namely crack arrest, microstructurally and physically short crack (Stage I), long crack growth (Stage II) and Stage III growth. Crack tip propagation rates are predicted through the combination of an Elasto-Plastic crack tip opening displacement model and the crack blunting theory. The methodology provides a theoretical framework for a 3D version of the fatigue damage map for damage tolerance design. In addition, the work attends to explain a number of fundamental problems starting from crack tip propagation discrepancies, found in the short cracking stage, as well as to provide an insight towards the effect of grain size on the fatigue limit/threshold stress intensity factor.     

SELF-SIMILAR CRACK EXPANSION METHOD FOR THE STRESS INTENSITY FACTOR ANALYSIS

The Self-Similar Crack Expansion (SSCE) method is proposed to evaluate stress intensi-ty factors at crack tips, whereby stress intensity factors of a crack can be determined by the crackopening displacement over the crack, not just by the local displacement around the crack tip. The crackexpansion rate is estimated by taking advantage of the crack self-similarity. Therefore, the accuracy ofthe calculation is improved. The singular integrals on crack tip elements are also analyzed and are pre-cisely evaluated in terms of a special integral analysis. Combination of these two techniques greatly in-creases the accuracy in estimating the stress distribution around the crack tip. A variety of two-dimen-sional cracks, such as subsurface cracks, edge cracks, and their interactions are calculated in terms ofthe self-similar expansion rate. Solutions are satisfied with errors less than 0.5% as compared with theanalytical solutions. Based on the calculations of the crack interactions, a theory for crack interactionsis proposed such that for a group of aligned cracks the summation of the square of SIFs at the right tipsof cracks is always equal to that at the left tips of cracks. This theory was proved by the mehtod ofSelf-Similar Crack Expansion in this paper.     

FATIGUE GROWTH MODELING OF MIXED-MODE CRACK IN PLANE ELASTIC MEDIA

This paper presents an extension of a displacement discontinuity method with cracktip elements （a boundary element method） proposed by the author for fatigue crack growth analysis in plane elastic media under mixed-mode conditions. The boundary element method consists of the non-singular displacement discontinuity elements presented by Crouch and Starfield and the crack-tip displacement discontinuity elements due to the author. In the boundary element implementation the left or right crack-tip element is placed locally at the corresponding left or right crack tip on top of the non-singular displacement discontinuity elements that cover the entire crack surface and the other boundaries. Crack growth is simulated with an incremental crack extension analysis based on the maximum circumferential stress criterion. In the numerical simulation, for each increment of crack extension, remeshing of existing boundaries is not required because of an intrinsic feature of the numerical approach. Crack growth is modeled by adding new boundary elements on the incremental crack extension to the previous crack boundaries. At the same time, the element characteristics of some related elements are adjusted according to the manner in which the boundary element method is implemented. As an example, the fatigue growth process of cracks emanating from a circular hole in a plane elastic plate is simulated using the numerical simulation approach.     

Subsonic and intersonic mode II crack propagation with a rate-dependent cohesive zone

A recent experimental study has demonstrated the attainability of intersonic shear crack growth along weak planes in otherwise homogeneous, isotropic, linear elastic solids subjected to remote loading conditions (Rosakis et al., Science 284 (5418) (1999) 1337). The relevant experimental observations are summarized briefly here and the conditions governing the attainment of intersonic crack speeds are examined. Motivated by experimental observations, subsonic and intersonic mode II crack propagation with a rate-dependent cohesive zone is subsequently analyzed. A cohesive law is assumed, wherein the cohesive shear traction is either a constant or varies linearly with the local sliding rate. Complete decohesion is assumed to occur when the crack tip sliding displacement reaches a material-specific critical value. Closed form expressions are obtained for the near-tip fields. With a cohesive zone of finite size, it is found that the dynamic energy release rate is finite through out the intersonic regime. Crack tip stability issues are addressed and favorable speed regimes are identified. The influence of shear strength of the crack plane and of a rate parameter on crack propagation behavior is also investigated. The isochromatic fringe patterns predicted by the analytical solution are compared with the experimental observations of Rosakis et al. (1999) and comments are made on the validity of the proposed model.     

INTERACTION OF THREE PARALLEL CRACKS IN RECTANGULAR PLATE UNDER CYCLIC LOADS

This paper presents a numerical approach for modeling the interaction between multiple cracks in a rectangular plate under cyclic loads. It involves the formulation of fatigue growth of multiple crack tips under ruixed-mode loading and an extension of a hybrid displacement discontinuity method （a boundary element method） to fatigue crack growth analyses. Because of an intrinsic feature of the boundary element method, a general growth problem of multiple cracks can be solved in a single-region formulation. In the numerical simulation, remeshing of existing boundaries is not necessary for each increment of crack extension. Crack extension is conveniently modeled by adding new boundary elements on the incremental crack extension to the previous crack boundaries. As an example, the numerical approach is used to analyze the fatigue growth of three parallel cracks in a rectangular plate. The numerical results illustrate the validation of the numerical approach and can reveal the effect of the geometry of the cracked plate on the fatigue growth.     

A boundary element modeling of fatigue crack growth in a plane elastic plate

This paper presents an extension of a boundary element method to fatigue growth analysis of mixed-mode cracked plane elastic bodies. The method consists of the non-singular displacement discontinuity element presented by Crouch and Starfield and the crack-tip displacement discontinuity element due to the author. In the boundary element implementation the left or the right crack-tip element is placed locally at the corresponding left or right crack tip on top of non-singular displacement discontinuity elements that cover the entire crack surface and the other boundaries. Crack growth is simulated with an incremental crack extension analysis based on the modified maximum strain energy density criterion. In numerical simulation, for each increment of crack extension, remeshing of existing boundaries is not required because of an intrinsic feature of the boundary element method. Crack growth is simulated by adding new boundary elements on the incremental crack extension to the previous crack boundaries. At the same time, the element characters of some related elements are adjusted according to the manner in which the boundary element method is implemented. Some numerical results of fatigue growth in a plane elastic plate with a center-inclined crack under uniaxial cyclic loading are given.     

Accumulative damage near crack tip for welded bridge members: fatigue life determination

The behavior of crack growth for the fatigue damage accumulation near tip where damage is most severe is analyzed. Fatigue life is assessed for the welded members of bridges under traffic loading. Two parts are considered. They consist of the development of a fatigue damage accumulation model for welded bridge members and a method for calculating the stress intensity factor that is needed for evaluating the fatigue life of welded bridge members with cracks. Based on the concept of continuum damage accumulation and fatigue and fatigue crack growth relations, results are obtained to describe the relationship between the cracking count rate and the effective stress intensity factor. Crack growth and fatigue life are found for two types of welded members assisted by using fatigue experimental results. The stress intensity factors are modified by correcting for the geometric shape of the welded members in order to reflect the influence of the weldment and geometry. This is accomplished via the stress intensity factor. The calculated and measured fatigue lives were generally in good agreement for the initial cracking conditions of two types of welded members widely used in steel bridges.     

Edge cracks in plastically deforming surface grains

A selection of surface crack problems is presented to provide insights into Stage I and early Stage II fatigue crack growth. Edge cracks at 45^o and 90^o to the surface are considered for cracks growing in single crystals. Both single crystal slip and conventional plasticity are employed as constitutive models. Edge cracks at 45^o to the surface are considered that either (i) kink in the direction perpendicular to the surface, or (ii) approach a grain boundary across which only elastic deformations occur.     

Fatigue growth modeling of cracks emanating from a circular hole in infinite plate

This paper presents a numerical approach of fatigue growth analysis of cracks emanating from a hole in infinite elastic plate subjected to remote loads. It involves a generation of Bueckner’s principle and a hybrid displacement discontinuity method (a boundary element method) proposed recently by the senior author of the paper. Because of an intrinsic feature of the boundary element method, a general crack growth problem can be solved in a single region formulation. In the numerical simulation, for each increment of crack extension, remeshing of existing boundaries is not necessary. Crack extension is modeled conveniently by adding new boundary elements on the incremental crack extension to the previous crack boundaries. As an example, fatigue growth process of an inclined crack in an infinite plate under uniaxial cycle load is modeled to illustrate the effectiveness of the numerical approach. In addition, fatigue growth of cracks emanating from a circular hole in infinite elastic plate subjected to remote loads is investigated by using the numerical approach. Many numerical results are given     

基于数字散斑相关方法测定Ⅰ型裂纹应力强度因子

提出了一种通过数字散斑相关方法测定金属材料Ⅰ型裂纹尖端位置和应力强度因子的实验方法.实验采用疲劳试验机对含Ⅰ型缺口的Cr12MoV钢试件预制裂纹,通过数字散斑相关方法测试试件在三点弯曲加载条件下裂纹的扩展过程及裂尖区域的位移场.将位移场数据代入裂尖位移场方程组,采用牛顿-拉普森方法求解含未知参量的裂尖非线性位移场方程组,计算裂尖位置和应力强度因子.实验结果表明,采用该方法可以准确地测定金属材料Ⅰ型裂纹应力强度因子、裂尖位置及裂纹扩展长度,解决了以往研究中因不能准确测定裂纹尖端位置,而无法准确计算Ⅰ型裂纹裂尖断裂参数的难题,揭示了金属材料裂纹扩展过程中应力强度因子演化特征.     

Molecular dynamics simulations of DFZ

Dislocation emission from the crack tip in copper under mode II loading is simulated with molecular dynamics method. After 26 partial dislocations are emitted and then relaxed to reach the equilibrium under the constant displacement, the double pile-ups (including an inverse pile-up and a pile-up) are formed. i.e., the first dislocation is piled up before the obstruction, and the last dislocation is piled up ahead of the crack tip. These results conform to the TEM observations. The project supported by the National Natural Science Foundation of China     

单向加载,平均应力下的疲劳短裂纹生长

本文报道单向加载下平均应力和交变应力对疲劳短裂纹生长的影响。采用一种1.99%NiCrMo钢,在平均应力和交变应力不同组合的应力控制条件下进行室温疲劳试验,将疲劳过程划分为3个阶段:塑性局部化,微观组织短裂纹(MSC)生长和物理短裂纹(PSC)生长,研究了平均应力对上述3个阶段的影响并得到一组关系式,这些关系式可预测多种平均应力和交变应力组合条件下短裂纹的初始阶段和生长行为。获得了不同平均应力下疲劳承载曲线的满意的预测结果。本研究为仍依赖于传统的Goodman疲劳图的设计人员提供了一种以疲劳过程物理机制为基础的方法。     

A stress criterion for crack growth

A stress criterion for crack growth was developed from test results with 7075-T6 aluminum-sheet specimens containing transverse machined cracks. Stress distributions near the crack tip were obtained using strain gages and by reducing the strain data to stresses with the aid of Reuss plasticity theory. These distributions indicated the biaxial nature of stress at the crack tip, the high stress gradients a short distance from the tip, and the variation in stress-concentration factor with crack length. Crack growth was found to occur when the effective stress at the crack root reached the engineering ultimate strength.     

拉压循环载荷下正交异性钢桥面板肋-面板焊缝裂纹扩展分析

采用四步法计算了考虑循环载荷中压应力影响的正交异性钢桥面板的肋-面板焊缝表面裂纹扩展。第一步是基于正交异性钢桥面板的疲劳分析模型,计算肋-面板焊缝处的应力,第二步是通过肋-面板焊缝的三维局部模型,用Schwartz-Neumann交替法计算焊缝表面裂纹的应力强度因子分布,第三步是用二维断裂力学模型和增量塑性损伤模型,计算循环载荷中的压应力对裂纹扩展的影响,第四步是用第二步中的三维裂纹分析结果和第三步中的二维断裂力学模型得到的裂纹扩展公式,计算钢桥面板的肋-面板焊缝表面裂纹扩展。计算结果表明,对应于正交异性钢桥面板肋-面板焊缝处的循环应力,本文所用模型的裂纹尖端反向塑性区导致裂纹扩展率增加50%以上。研究结果为正交异性钢桥面板肋-面板焊缝裂纹的疲劳寿命分析提供了研究基础。     

Predicting the fatigue life and crack aspect ratio evolution in complex structures

This paper discusses a computationally efficient method for determining the behaviour of complex structures containing three-dimensional cracks. A simple method is presented for calculating the mode I stress intensities for semi-elliptical cracks emanating from the saddle point of two intersecting tubular members. This method, which gives results in good agreement with published values, uses the finite element technique, but does not require the crack to be modelled explicitly. The technique is then used, in conjunction with FASTRAN II, to study fatigue crack growth and the results are compared to experimental data. Good agreement is achieved between both the predicted and measured fatigue crack growth and the evolution of the crack aspect ratios.     

Crack growth under alternating loading

Crack propagation under alternating loading is investigated. Relations between the growth rate of a fatigue defect and loading parameters and the expression for the stress intensity factor are derived for compression of a cracked solid taking into account the possible contact of the crack faces. A model for the deformation of a small region near the crack tip is proposed which allows one to formulate the conditions of residual opening of a growing fatigue crack. The experimental data obtained in tests of steel samples are compared with the results of calculation using the developed procedure. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 49, No. 5, pp. 190–198, September–October, 2008.     

Development of a multiaxial fatigue theory by considering constraint effects on small mixed-mode cracks

The effects of the transverse strain (the normal strain in the crack-line direction) on the near-tip fields of small shallow surface cracks (Case A cracks) in power-law hardening materials are investigated by finite element analyses. The small Case A cracks are under plane stress, general yielding, and mixed mode I and II conditions. Constant effective stress contours representing the intense straining zones near the tip, deformed crack-tip profiles and near-tip mode mixity factors are presented for different transverse strains in the crack-line direction. Based on the concept of characterization of fatigue crack growth by the cyclic J-integral, the effects of the transverse strain on J are investigated. The results suggest that the fatigue life prediction based on multiaxial fatigue theories and the critical plane approach should include the constraint effects due to the transverse strain. Consequently, the concept of constant fatigue life contour on the Γ-plane in multiaxial fatigue theories is generalized to the constant fatigue life surface in the Γ-space where the shear strain and the two normal strains are the three axes. Finally, a damage parameter as a function of the shear strain and the two normal strains is proposed for evaluation of fatigue damage under multiaxial loading conditions.     

表面裂纹疲劳扩展的数值模拟(Ⅱ)

根据Paris疲劳裂纹扩展规律,对拉伸和纯弯曲疲劳载荷下表面裂纹扩展进行了数值模拟。数值模型中,用三次样条函数曲线拟合裂纹尖端,在裂纹扩展增量计算中考虑了裂纹闭合影响。裂纹形状演化的模拟结果与Newman和Raju经验公式预测结果进行了比较,表明了所采用的数值模拟方法的实用性。研究发现,裂纹闭合对疲劳裂纹扩展过程中的裂纹形状演化以及裂纹尖端的应力强度因子(SIF)分布都有明显影响。同裂纹形状演化一样,疲劳裂纹扩展过程中裂纹尖端的SIF分布表现出明显的特征。最后,建议了一个简单函数来统一描述表面裂纹尖端的SIF分布。