Preparation of end-grafted polymer brushes by nitroxide-mediated free radical polymerization of vaporized vinyl monomers

In this work, we report a gas-phase polymerization approach to create end-grafted vinyl based polymer films on silicon oxide based substrates. The "surface-initiated vapor deposition polymerization" (SI-VDP) of vaporized vinyl monomers, via the nitroxide-mediated free radical polymerization mechanism, was developed to fabricate various homo- and block copolymer brushes from surface-bound initiators, 1-(4'-oxa-2'-phenyl-12'-trimethoxysilyldodecyloxy)-2,2,6,6-tetra-methylpiperidine ("TEMPO"). The resulting polymer thin films were characterized by the Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, ellipsometry, and contact angle goniometry, respectively, to identify the surface composition, film thickness, surface coverage, and water contact angles. Through the SI-VDP, end-grafted polymer films of polystyrene (PSt), poly(acrylic acid) (PAAc), poly(N-(2-hydroxypropyl) methacrylamide) (PHPMA), and poly(N-isopropylacrylamide) (PNIPAAm) with 10-200 nm thicknesses were fabricated. Furthermore, the block copolymer films of PAAc (1st block)-b-PSt (2nd block), PSt (1st block)-b-PAAc (2nd block), and a triblock copolymer film of PAAc (1st)-b-PSt (2nd)-b-PHPMA (3rd), were also fabricated, suggesting the "renewability" of the TEMPO-initiated polymerization in the SI-VDP scheme. It is also noticed that the SI-VDP is more efficient than the conventional solution phase polymerization in producing functional polymer brushes such as PNIPAAm, PAAc, or PAAc-b-PSt end-grafted films. In summary, our studies have shown clear advantages of the SI-VDP setup for the nitroxide-mediated polymerization scheme in controlling synthesis of end-grafted homo- and copolymer thin films.     

Formation of antifouling functional coating from deposition of a zwitterionic-co-nonionic polymer via “grafting to” approach

We develop a new process for the preparation of synergistic antifouling functional coatings on gold surfaces via a “grafting to” approach. The strategy includes a synthetic step of polymer brushes that consist of poly (ethylene glycol) (PEG) and zwitterionic side chains via a typical reversible-addition fragmentation chain transfer (RAFT) polymerization process, and a subsequent deposition of the polymer brushes onto a gold substrate. The presence of PEG and zwitterion chains on these polymer brush-coated gold surfaces has been proved to have a synergistic effect on the final antifouling property of the coating. PEG chains lower the electrostatic repulsion between zwitterionic polymer chains and increase their graft density on gold surfaces, while zwitterionic polymer effectively improves the antifouling property that is offered by PEG chains alone. Protein adsorption and cell attachment assays tests are conducted to confirm that this copolymer layer on gold surface has a pronounced resistance against proteins such as Bovine serum albumin and Lysozyme. Importantly, the antifouling property can be systematically adjusted by varying the molar ratio of PEG to zwitterionic chains in the final coating copolymer.     

Functionalization of hydrogen-terminated silicon via surface-initiated atom-transfer radical polymerization and derivatization of the polymer brushes

Surface-initiated atom-transfer radical polymerization (ATRP) of poly(ethylene glycol) monomethacrylate (PEGMA) was carried out on the hydrogen-terminated Si(100) substrates with surface-tethered alpha-bromoester initiator. Kinetic studies confirmed an approximately linear increase in polymer film thickness with reaction time, indicating that chain growth from the surface was a controlled "living" process. The "living" character of the surface-grafted PEGMA chains was further ascertained by the subsequent extension of these graft chains, and thus the graft layer. Well-defined polymer brushes of near 100 nm in thickness were grafted on the Si(100) surface in 8 h under ambient temperature in an aqueous medium. The hydroxyl end groups of the poly(ethylene glycol) (PEG) side chains of the grafted PEGMA polymer were derivatized into various functional groups, including chloride, amine, aldehyde, and carboxylic acid groups. The surface-functionalized silicon substrates were characterized by reflectance FT-IR spectroscopy and X-ray photoelectron spectroscopy (XPS). Covalent attachment and derivatization of the well-defined PEGMA polymer brushes can broaden considerably the functionality of single-crystal silicon surfaces.     

Redox monomer ionic liquid based on quaternary ammonium: From electrochemistry to polymer brushes

Bifunctional quaternary ammonium ionic liquid bearing redox and polymerisable units was synthesized. The electrochemical investigations of the ferrocene monomer ionic liquid were performed. Following that, surface-initiated atom transfer radical polymerization (SI-ATRP) was used to build polymer brushes onto the electrode surface. The presence of the Poly(ferrocenyl quaternary ammonium) was evidenced by surface and electrochemical analysis. The latter exhibits high electron transfer rate and the presence of ions within the polymer framework leads to record the attached ferrocenyl redox signal in solution without adding supporting electrolyte. Finally, the wettability of the surface was modulated by electrochemical switch and by anion exchange within the polymer.     

Mesoscale simulations of the behavior of charged polymer brushes under normal compression and lateral shear forces

Dissipative particle dynamics (DPD) was used to investigate the behavior of two opposing end-grafted charged polymer brushes in aqueous media under normal compression and lateral shear. The effect of polymer molecular weight, degree of ionization, grafting density, ionic strength, and compression on the polymer conformation and the resulting shear force between the opposing polymer layers were investigated. The simulations were carried out for the poly(tert-butyl methacrylate)-block-poly(sodium sulfonate glycidyl methacrylate) copolymer, referred as PtBMA-b-PGMAS, end-attached to a hydrophobic surface for comparison with previous experimental data. Mutual interpenetration of the opposing end-grafted chains upon compression is negligible for highly charged polymer brushes for compression ratios ranging from 2.5 to 0.25. Under electrostatic screening effects or for weakly charged polymer brushes, a significant mutual interpenetration was measured. The variation of interpenetration thickness with separation distance, grafting density, and polymer size follows the same scaling law as the one observed for two opposing grafted neutral brushes in good solvent. However, compression between two opposing charged brushes results in less interpenetration relative to neutral brushes when considering equivalent grafting density and molecular weight. The friction coefficient between two opposing polymer-coated surfaces sliding past each other is shown to be directly correlated with the interpenetration thickness and more specifically to the number of polymer segments within the interpenetration layer.     

Bioadhesive control of plasma proteins and blood cells from umbilical cord blood onto the interface grafted with zwitterionic polymer brushes

In this work, bioadhesive behavior of plasma proteins and blood cells from umbilical cord blood (UCB) onto zwitterionic poly(sulfobetaine methacrylate) (polySBMA) polymer brushes was studied. The surface coverage of polySBMA brushes on a hydrophobic polystyrene (PS) well plate with surface grafting weights ranging from 0.02 mg/cm(2) to 0.69 mg/cm(2) can be effectively controlled using the ozone pretreatment and thermal-induced radical graft-polymerization. The chemical composition, grafting structure, surface hydrophilicity, and hydration capability of prepared polySBMA brushes were determined to illustrate the correlations between grafting properties and blood compatibility of zwitterionic-grafted surfaces in contact with human UCB. The protein adsorption of fibrinogen in single-protein solutions and at complex medium of 100% UCB plasma onto different polySBMA brushes with different grafting coverage was measured by enzyme-linked immunosorbent assay (ELISA) with monoclonal antibodies. The grafting density of the zwitterionic brushes greatly affects the PS surface, thus controlling the adsorption of fibrinogen, the adhesion of platelets, and the preservation of hematopoietic stem and progenitor cells (HSPCs) in UCB. The results showed that PS surfaces grafted with polySBMA brushes possess controllable hydration properties through the binding of water molecules, regulating the bioadhesive and bioinert characteristics of plasma proteins and blood platelets in UCB. Interestingly, it was found that the polySBMA brushes with an optimized grafting weight of approximately 0.1 mg/cm(2) at physiologic temperatures show significant hydrated chain flexibility and balanced hydrophilicity to provide the best preservation capacity for HSPCs stored in 100% UCB solution for 2 weeks. This work suggests that, through controlling grafting structures, the hemocompatible nature of grafted zwitterionic polymer brushes makes them well suited to the molecular design of regulated bioadhesive interfaces for use in the preservation of HSPCs from human UCB.     

Single component and selective competitive protein adsorption in a patchy polymer brush: opposition between steric repulsions and electrostatic attractions

This work explores the use of "patchy" polymer brushes to control protein adsorption rates on engineered surfaces and to bind targeted species from protein mixtures with high selectivity but without invoking molecular recognition. The brushes of interest contain embedded cationic "patches" composed of isolated adsorbed poly(l-lysine) coils (PLL) that are about 10 nm in diameter and are randomly arranged on a silica substrate. Around these patches is a protein-resistant poly(ethylene glycol) (PEG) brush that is formed from the adsorption of a PLL-g-PEG graft copolymer on the remaining silica surface. Electrostatic attractions between individual cationic patches and the negative regions of approaching proteins may be energetically insufficient to bind proteins. Furthermore, protein-patch attractions are reduced by steric repulsions between proteins and the PEG brush. We show that protein adsorption, gauged by ultimate short-term coverages and by the initial protein adsorption rate, exhibits an adhesion threshold: pure PEG brushes of the architectures employed here and brushes containing sparse loadings of PLL patches do not adsorb protein. Above a critical PLL patch loading or threshold, protein adsorption proceeds, often dramatically. The PLL patch thresholds are specific to the protein of interest, allowing surfaces to be engineered to adhesively discriminate different proteins within a mixture. The separation achieved is remarkably sharp: one protein adsorbs, but the second is completely rejected from the interface. The surfaces in this study, by virtue of their well-controlled and well-characterized patchy nature, distinguish themselves from multicomponent brushes or brushes used to end-tether peptide sequences and nucleotides.     

Substrate-independent three-dimensional polymer nanosheets induced by solution casting

Nanosheets are important structures usually composed of inorganic materials, such as metals, metal oxides, and carbon. Their creation typically involves hydrothermal, electrochemical or microwave processes. In this study, we report a novel formation mechanism of 3D polymer nanosheets via facile solution casting using a comb copolymer consisting of poly(ethylene glycol) behenyl ether methacrylate and poly(oxyethylene) methacrylate (PEGBEM–POEM). Controlling the composition of comb copolymer yielded nanosheets with different packing density and surface coverage. Interestingly, the structure exhibits substrate independence as confirmed by glass, inorganic wafer, organic filter paper, and porous membrane. The formation of 3D nanosheets was investigated in detail using coarse-grained molecular dynamics simulations. The obtained polymer nanosheets were further utilized as templates for inorganic nanosheets, which exhibit high conductivity owing to interconnectivity, and hence have promising electronic and electrochemical applications.

Unprecedented substrate-independent polymeric 3D nanosheets were induced via simple solution casting using PEGBEM–POEM comb copolymer. A possible mechanism is the change in the polymer–solvent interactions on the surface.     

Improvement of hemocompatibility of polycaprolactone film surfaces with zwitterionic polymer brushes

Polycaprolactone (PCL) has been widely adopted as a scaffold biomaterial, but further improvement of the hemocompatibility of a PCL film surface is still needed for wide biomedical applications. In this work, the PCL film surface was functionalized with zwitterionic poly(3-dimethyl(methacryloyloxyethyl) ammonium propane sulfonate) (P(DMAPS)) brushes via surface-initiated atom transfer radical polymerization (ATRP) for enhancing hemocompatibility. Kinetics study revealed an approximately linear increase in graft yield of the functional P(DMAPS) brushes with polymerization time. The blood compatibilities of the modified PCL film surfaces were studied by platelet adhesion tests of platelet-rich plasma and human whole blood, hemolysis assay, and plasma recalcification time (PRT) assay. The improvement of hemocompatibility is dependent on the coverage of the grafted P(DMAPS) brushes on the PCL film. Lower or no platelet and blood cell adhesion was observed on the P(DMAPS)-grafted film surfaces. The P(DMAPS) grafting can further decrease hemolysis and enhance the PRT of the PCL surface. With the versatility of surface-initiated ATRP and the excellent hemocompatibility of zwitterionic polymer brushes, PCL films with desirable blood properties can be readily tailored to cater to various biomedical applications.     

Site-specific dense immobilization of antibody fragments on polymer brushes supported by silicone nanofilaments

For site-specific dense immobilization of antibodies on a solid support, we prepared phosphorylcholine copolymer brushes on silicone nanofilaments. The nanofilaments were prepared on a silicon wafer by treatment with trichloromethylsilane (MeSiCl 3). To generate Si-OH groups on the nanofilaments, O 2 plasma was irradiated on the surface. Initiators for atom transfer radical polymerization (ATRP) were then coupled on the filaments. Phosphorylcholine copolymer brushes were prepared by a "grafting from" process, and pyridyl disulfide groups were introduced into the polymer chains. F(ab') fragments were then specifically immobilized onto these surfaces via a thiol-disulfide interchange reaction. The amount of antibodies immobilized on the nanofilament-supported copolymer brushes was approximately 65 times greater than that on smooth wafer-supported copolymer brushes.     

From smart polymer molecules to responsive nanostructured surfaces

A heteroarm star block copolymer made from seven polystyrene and seven poly(2-vinylpyridine) arms was grafted onto a solid substrate to fabricate a responsive polymer surface consisting of a densely packed monolayer of copolymer molecules. The grafted layer demonstrates a two-level hierarchical response upon external stimuli combining core-shell transitions of single stars with cooperative transitions of the interacting arms between "dimple" and "ripple" morphologies of the monolayer. The response allows for the switching of the surface properties upon changing solvent selectivity or pH of the aqueous environment.     

Architecture and solution properties of amphiphilic polymer brushes with peripheral charged ions

Functionalized poly(ethylene oxide) (PEO) macromonomers (alpha -tertiary amino and omega -methacryloyl groups) were prepared by ring-opening polymerization of live PEO anions end-capped with styrene oxide using 2-[2-(N ,N -dimethylamino)-ethoxy]ethanol potassium alkoxides as an initiator with methacryloyl chloride. PEO brushes were synthesized by free-radical homopolymerization of such PEO macromonomers. These brushes were converted into peripherally charged brushes by quaternization. We studied the solution properties of both types of brushes from the viewpoint of charge effect. It was found from dynamic light scattering (DLS) that the polymer brushes formed a single macromolecule in solution due to crowding of side chains. It was speculated from angular dependence measurements that the polymer brushes with large aspect ratios took a geometrical anisotropic conformation such as a cylinder. In methanol with a low dielectric constant, radius of gyration (R(G)), and cross-sectional radius of gyration (R(G,C)) of the polymer brushes with charged side chains were smaller than those of the polymer brushes without charges. In a solvent with a low dielectric constant such as methanol, ionic groups do not dissociate and condense. On the other hand, these physical values in an aqueous solution were somewhat larger than those of the polymer brushes without charges. In water with a high dielectric constant, peripherally charged brushes were strongly stabilized by electric double layers.     

Photochemical structuring and fixing of structures in binary polymer brush layers via 2pi+2pi photodimerization

Binary polymer brushes grafted to Si wafers were prepared from hydrophilic and hydrophobic polymer components, which allow switching the surface properties (as revealed by contact angles) by exposure to varying solvents. The hydrophilic component was poly-2-vinylpyridine; the hydrophobic component was a copolymer of styrene and 2-(4-vinylphenyl)indene containing the photodimerizable phenylindene chromophore. The brushes were prepared via thermal and via photochemical grafting-to methods, which led to distinct layer thicknesses. Structural patterns differing in surface properties were produced and fixed via crosslinking the hydrophobic component by 2pi+2pi photodimerization of phenylindene moieties. The patterns were visually observable.     

Photophysical and viscometric properties of naphthalene-labeled acrylamide/N,N-dimethyl maleimido propyl ammonium propane sulfonate copolymer

 The synthesis, viscometric, and fluorescence properties of a water-soluble zwitterionic sulfobetaine copolymer, poly(ADMMAPS)/NA, are reported. When fluorescent hydrophobes (naphthyl group) are incorporated into the zwitterionic copolymer, the photophysical response may effectively probe solution behavior on the microscopic level. Experimental results indicate that I _E/I _M steadily increases with increases in polymer concentration. I _E/I _M in aqueous solution is greater than that in aqueous potassium chloride solution. Dynamic light scattering (QELS) measurements show that hydrodynamic diameters of the naphthalene-labeled zwitterionic sulfobetaine copolymer increase with an increasing salt concentration. Viscosity studies reveal that the polymer coil expanded as more salt is added. In fluorescence quenching study, the reduction in the quenching efficiency of Tl⁺ with salt addition can arise from enhanced compartmentalization of naphthalene labels as added electrolyte enhances intrapolymer micellization. The intrapolymer micelle is easily formed, indicating that the thallium ion has difficulty reacting with bound naphthalenes located in the polymer coil. The naphthalene-labeled zwitterionic sulfobetaine copolymer is depicted as a compacted polymer coil conformation in deionized water because of intra-and inter-associations. Consequently, salt addition breaks up the associations and enhances the intrapolymer micellization. The microscopic and macroscopic behaviors of zwitterionic sulfobetaine copolymer differ a lot from those of the corresponding cationic copolymer. Received: 4 February 1997 Accepted: 1 May 1997     

A glucose sensor via stable immobilization of the GOx enzyme on an organic transistor using a polymer brush

Recently, there has been significant research in the area of organic electrochemical transistors (OECTs) because of their superior aptitude of chemical and biological sensing. Here it is shown for the first time the incorporation of polymer brushes to a transistor. Polymer brushes were chosen for their biocompatible properties and their ability to covalently tether enzymes and other biomolecules to different surfaces. OECTs were fabricated from the conducting polymer poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate), PEDOT:PSS, and polymerized from the surface a mixed polymer brush of poly(glycidyl methacrylate) and poly(2-hydroxyethyl methacrylate). The brushes were functionalized with glucose oxidase and measured in terms of electrical performance and long-term stability. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 372–377     

Tethering hydrophilic polymer brushes onto PPESK membranes via surface-initiated atom transfer radical polymerization

Surface-initiated atom transfer radical polymerization (ATRP) was used to graft hydrophilic comb-like poly((poly(ethylene glycol) methyl ether methacrylate), or P(PEGMA), brushes from chloromethylated poly(phthalazinone ether sulfone ketone) (CMPPESK) membrane surfaces. Prior to ATRP, chloromethylation of PPESK was beforehand performed and the obtained CMPPESK was prepared into porous membranes by phase inversion process. It was demonstrated that the benzyl chloride groups on the CMPPESK membrane surface afforded effective macroinitiators to graft the well-defined polymer brushes. Attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS) confirmed the grafting of P(PEGMA) chains. Water contact angle measurements indicated that the introduction of P(PEGMA) graft chains promoted remarkably the surface hydrophilicity of PPESK membranes. The effects of P(PEGMA) immobilization on membrane morphology, permeability and fouling resistance were investigated. It was found that the comb-like P(PEGMA) grafts brought smaller pore diameters and higher solute rejections to PPESK membranes. The results of dynamic anti-fouling experiments showed the anti-fouling ability of the membranes was significantly improved after the grafting of P(PEGMA) brushes.     

Controlled grafting of comb copolymer brushes on poly(tetrafluoroethylene) films by surface-initiated living radical polymerizations

Surface modification of poly(tetrafluoroethylene) (PTFE) films by well-defined comb copolymer brushes was carried out. Peroxide initiators were generated directly on the PTFE film surface via radio frequency Ar plasma pretreatment, followed by air exposure. Poly(glycidyl methacrylate) (PGMA) brushes were first prepared by surface-initiated reversible addition-fragmentation chain transfer polymerization from the peroxide initiators on the PTFE surface in the presence of a chain transfer agent. Kinetics study revealed a linear increase in the graft concentration of PGMA with the reaction time, indicating that the chain growth from the surface was consistent with a "controlled" or "living" process. alpha-Bromoester moieties were attached to the grafted PGMA by reaction of the epoxide groups with 2-bromo-2-methylpropionic acid. The comb copolymer brushes were subsequently prepared via surface-initiated atom transfer radical polymerization of two hydrophilic vinyl monomers, including poly(ethylene glycol) methyl ether methacrylate and sodium salt of 4-styrenesulfonic acid. The chemical composition of the modified PTFE surfaces was characterized by X-ray photoelectron spectroscopy.     

Stimuli-responsive polyelectrolyte polymer brushes prepared via atom-transfer radical polymerization

We present an account of our research into polyelectrolyte polymer brushes that are capable of acting as stimuli-responsive films. We first detail the synthesis of poly(acrylic acid) polymer brushes using ATRP in a "grafting from" strategy. Significantly, we employed a chemical-free deprotection step that should leave the anchoring ester groups intact. We have demonstrated how these polymer assemblies respond to stimuli such as pH and electrolyte concentration. We have used poly(acrylic acid) polymer brushes for the synthesis of metallic nanoparticles and review this work. We have used XPS, ATR-FTIR, and AFM spectroscopy to show the presence of silver and palladium nanoparticles within polymer brushes. Finally, we report the synthesis of AB diblock polyampholyte polymer brushes that represent an extension of polyelectrolyte polymer brushes.     

Controlled synthesis of hydrophilic concentrated polymer brushes and their friction/lubrication properties in aqueous solutions

Polymer brushes of water‐soluble polymers, poly(2‐hydroxyethyl acrylate) (PHEA) and poly(poly(oxyethyleneglycol)methylether acrylate) (PPEGA), were synthesized on a silicon wafer and a silica particle by applying photo‐induced organotellurium‐mediated radical polymerization to surface‐initiated graft polymerization. High graft densities were obtained, corresponding to reduced graft densities of about 0.32 and 0.42 for the PHEA and PPEGA brushes, respectively. These values were high enough to be categorized in the regime of “concentrated” polymer brushes (CPBs). Atomic force microscopic (AFM) study revealed that the CPB of PPEGA was allowed to be highly swollen in water but the CPB of PHEA did not. This means that water is reasonably good for PPEGA but not for PHEA. The AFM microtribological study between swollen brushes revealed two lubrication regimes, namely, boundary‐ and hydrodynamic‐lubrication regimes, with different shear‐velocity dependencies. Reflecting insufficient quality of water as a solvent, the CPB of PHEA showed adhesive interaction and thereby a higher frictional coefficient μ in the boundary lubrication. More interestingly, super lubrication was achieved for the CPB of PPEGA with a μ value in the order of 10^?4 in water and in 0.1 M aqueous NaCl solution (without the help of electrostatic repulsion). Super lubrication was concluded to be a characteristic feature of the CPB, even in an aqueous system. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Control of surface properties using fluorinated polymer brushes produced by surface-initiated controlled radical polymerization

Surface-grafted styrene-based homopolymer and diblock copolymer brushes bearing semifluorinated alkyl side groups were synthesized by nitroxide-mediated controlled radical polymerization on planar silicon oxide surfaces. The polymer brushes were characterized by X-ray photoelectron spectroscopy (XPS), near-edge X-ray absorption fine structure (NEXAFS), and time-dependent water contact angle measurements. Angle-resolved XPS studies and water contact angle measurements showed that, in the case of the diblock copolymer brushes, the second block to be added was always exposed at the polymer-air interface regardless of its surface energy. Values of z*/Rg were estimated based on the radius of gyration, Rg, of the grafted homopolymer or block copolymer chains for the grafted brushes and thickness of the brush, z*. The fact that z*/Rg > 1 suggests that all these brushes are stretched. These results support the idea that after grafting the first block onto the surface the nitroxide-end capped polymer chains were able to polymerize the second block in a "living" fashion and the stretched brush so formed was dense enough that the outermost block in all cases completely covers the surface. NEXAFS analysis showed a relationship between the surface orientation of the fluorinated side chains and brush thickness with thicker brushes having more oriented side chains. Time-dependent water contact angle measurements revealed that the orientation of the side chains of the brush improved the surface stability toward reconstruction upon prolonged exposure to water.