A mechanistic investigation of the polymerization of ethylene catalyzed by neutral Ni(II) complexes derived from bulky anilinotropone ligands

An extensive mechanistic investigation has been carried out on ethylene polymerizations catalyzed by neutral Ni(II) catalysts derived from bulky anilinotropone ligands. Complexes and precatalysts prepared include aryl derivatives [(2,6-i-Pr(2)C(6)H(3))NC(7)H(4)O(7-Aryl)Ni(Ph)(PPh(3))] (9, Aryl = phenyl(a), 1-naphthyl(b), p-methoxyphenyl(c), p-trifluoromethylphenyl(d)), alkyl derivatives [[(2,6-(i)Pr(2)C(6)H(3))NC(7)H(5)O]Ni(R)(2,4-lutidine)] (16, R = Et (a), n-Pr (b)) and [[(2,6-(i)Pr(2)C(6)H(3))NC(7)H(5)O]Ni(R)(PPh(3))] (17, R = Et (a), n-Pr (b), n-hexyl (c), i-Pr (d)), and the nickel hydride complex [[(2,6-(i)Pr(2)C(6)H(3))NC(7)H(5)O]Ni(H)(PPh(3))], 20. Branched polyethylenes are produced at 40-80 degrees C in toluene with M(n) values in the 100-200K range and molecular weight distributions of ca. 1.4-2.2. Branching ranges from 15 to 64 branches/1000 carbons depending on temperature and ethylene pressure. The electron-withdrawing -CF(3) substituent on the 7-aryl group increases activity but has little effect on branching and molecular weight. NMR experiments establish that in the case of the PPh(3)-substituted systems, the catalyst rests as an equilibrating mixture of the alkyl phosphine and the alkyl ethylene complexes. At high ethylene pressures, the turnover frequency saturates, indicating that the equilibrium has shifted nearly completely to the alkyl olefin complex. Under these conditions, the barriers to migratory insertion were determined to be ca. 16-17 kcal/mol for 9a, 9c, 9d, and 16a. Extraction of 2,6-lutidine from complexes 16a,b yields highly dynamic beta-agostic alkyl complexes [[(2,6-i-Pr(2)C(6)H(3))NC(7)H(5)O]Ni(Et)] 21 and [[(2,6-i-Pr(2)C(6)H(3))NC(7)H(5)O]Ni(i-Pr)] 22. Free energy barriers to nickel-carbon bond rotation and beta-hydride elimination of 11.1 and ca. 17 kcal/mol, respectively, were determined for 22. Themolysis of 17c at 50 degrees C generates hydride 20 and hexene and occurs by two pathways, one independent of [PPh(3)] and one retarded by PPh(3). At much slower rates, hydride 20 reductively eliminates free ligand, which ultimately generates a bis-ligand complex, 25. Catalyst decay under polymerization conditions was shown to occur by a similar process to generate free ligand and a bis-ligand complex formed by reaction of free ligand with an active catalyst species. The major chain transfer route is a simple beta-elimination process, not chain transfer to monomer.     

Bis(isothiocyanato)bis(phosphine) complexes of group 10 metals: reactivity toward organic isocyanides

Treatment of Ni(NCS)2(PMe2Ph)2 with organic isocyanides CN-R gave five-coordinate isocyanide Ni(II) complexes, Ni(CN-R)(NCS)2(PMe2Ph)2 (R = C6H3-2,6-Me2 (1), t-Bu (2)). Interestingly, the corresponding reaction of Ni(NCS)2(P(n-Pr)3)2 with 2 equiv. of CN-t-Bu gave an unusual compound, which exists as an ion pair of the trigonal bipyramidal cation [Ni(P(n-Pr)3)2(CN-t-Bu)3]2+ (3) and the dinuclear NCS-bridged anion [Ni(1,3-micro-NCS)(NCS)3]2(2-) (4). In contrast, Pd(NCS)2(P(n-Pr)3)2 underwent substitution with 2 equiv. of CN-t-Bu to give the four-coordinate mono(isocyanide) Pd(II) complex Pd(NCS)(SCN)(CN-t-Bu)(P(n-Pr)3) (5) via phosphine dissociation. Reactions of M(NCS)2L2 (M = Pd, Pt; L = PMe3, PEt3, PMePh2, P(n-Pr)3) with two equiv. of CN-R (R = t-Bu, i-Pr, C6H3-2,6-Me2) gave the corresponding bis(isocyanide) complexes [M(CN-R)2(PR3)2](SCN)2 (7-13), except for Pd(NCS)2(PEt3)2 that reacted with CN-R' (R' = i-Pr, C6H3-2,6-Me2) and produced the mono(isocyanide) Pd(II) complexes [Pd(CN-R')(SCN)(PEt3)2](SCN) (14 and 15). Finally, treatment of M(NCS)2(PMe3)2 (M = Ni, Pd, Pt) with sterically bulky isocyanide CN-C6H3-2,6-i-Pr2 gave various products, (16-18) depending on the identity of the metal.     

Preparation, characterization, and magnetic behavior of the ln derivatives (ln = nd, la) of a 2,6-diiminepyridine ligand and corresponding dianion

An unprecedented Nd[2,6-[[2,6-(i-Pr)(2)C(6)H(5)]N=C(CH(3))](2)(C(5)H(3)N)]NdI(2)(THF) (1) complex was prepared by oxidizing metallic Nd with I(2) in THF and in the presence of 2,6-[[2,6-(i-Pr)(2)C(6)H(5)]N=C(CH(3))](2)(C(5)H(3)N). The magnetic behavior at variable T clearly indicated that the complex should be regarded as a trivalent Nd atom antiferromagnetically coupled to a radical anion. By using the doubly deprotonated form of the diimino pyridine ligand [[2,6-[[2,6-(i-Pr)(2)C(6)H(5)]N-C=CH(2)](2)(C(5)H(3)N)](2-) (2) the corresponding trivalent complexes [[2,6-[[2,6-(i-Pr)(2)C(6)H(5)]N-C=CH(2)](2)(C(5)H(3)N)]Ln (THF)](mu-Cl)(2)[Li(THF)(2)].0.5 (hexane) [Ln = Nd (3), La (4)] were obtained and characterized. Reduction of these species afforded electron transfer to the ligand system which gave ligand dimerization via C-C bond formation through one of the two ene-amido functions of each molecule. The resulting dinuclear [[([2,6-(i-Pr)(2)C(6)H(5)]N-C=(CH(2)))(C(5)H(3)N)([2,6-(i-Pr)(2)C(6)H(5)]N=CCH(2))]Ln(THF)(2)(mu-Cl)[Li(THF)(3)])(2).2(THF) [Ln = Nd (5), La (6)] were isolated and characterized.     

Ni(II) and Fe(II) complexes based on bis(imino)aryl pincer ligands: synthesis, structural characterization and catalytic activities

Bis(imino)aryl NCN pincer Ni(II) complexes 2,6-(ArN=CH)(2)C(6)H(3)NiBr (1: Ar = 2,6-Me(2)C(6)H(3); 2: Ar = 2,6-Et(2)C(6)H(3); 3: Ar = 2,6-(i)Pr(2)C(6)H(3)) were prepared via the oxidative-addition of Ni(0)(Ph(3)P)(4) with bis(N-aryl)-2-bromoisophthalaldimine. These nickel complexes were characterized by NMR and elemental analyses. Their solid molecular structures were established by X-ray diffraction analyses. The nickel metal centers adopt distorted square planar geometries with the bromine atoms acting as one coordinate ligands. The NCN pincer Fe(II) complexes 2,6-(ArN=CH)(2)C(6)H(3)Fe(μ-Cl)(2)Li(THF)(2) (4: Ar = 2,6-Me(2)C(6)H(3); 5: Ar = 2,6-Et(2)C(6)H(3); 6: Ar = 2,6-(i)Pr(2)C(6)H(3)) were synthesized by lithium salt metathesis reactions of the ligand lithium salts with FeCl(2). X-ray structure analyses of 4 and 5 revealed that the Fe(II) complexes are hetero-dinuclear with the iron atoms in trigonal bipyramidal environments. When activated with MAO, the nickel complexes are active for norbornene vinyl polymerization but are inert for butadiene polymerization. The Fe(II) complexes show moderate activities in butadiene polymerization when activated with alkylaluminium, affording the cis-1,4 enriched polymer.     

The impact of P-substituents on the structures, spectroscopic properties, and reactivities of POCOP-type pincer complexes of nickel(II)

The room temperature reaction of NiBr(2)(NCCH(3))(x) with the pincer-type ligand POCHOP(Ph) gave the new pincer complex (POCOP(Ph))NiBr (1, POCOP(Ph) = κ(P), κ(C), κ(P)-2,6-{Ph(2)PO}(2)C(6)H(3)). Complex 1 reacts with AgX to give the analogous Ni-X derivatives (X = CN, 2; OSO(2)CF(3), 3; OC(O)CH(3), 4; ONO(2), 5), whereas complex 3 reacts with phenylacetylene and NEt(3) to give the Ni-CCPh derivative 6. On the other hand, reaction of 1 or 3 with RLi or RMgI did not afford the desired Ni-R derivatives, giving instead the corresponding iodo and hydroxo derivatives. Complexes 1-6 have been characterized by NMR, IR, and UV-Vis spectroscopy and X-ray crystallography. The solid state structural and IR data indicate that Ni-C(sp) interaction is dominated by ligand-to-metal σ-donation in 2 and 6. Cyclic voltammetry measurements indicate that complexes 3 and 4 display reversible redox behaviour (Ni(II)/Ni(III)); comparison of the E(0)(1/2) values for these complexes and their POCOP(i-Pr) analogues shows that both the X ligands and the P-substituent have a considerable impact on the ease of oxidation in this family of complexes.     

Mononuclear nickel(III) complexes [Ni(III)(OR)(P(C6H3-3-SiMe3-2-S)3)](-) (R = Me, Ph) containing the terminal alkoxide ligand: relevance to the nickel site of oxidized-form [NiFe] hydrogenases

The unprecedented nickel(III) thiolate [Ni (III)(OR)(P(C 6H 3-3-SiMe 3-2-S) 3)] (-) [R = Ph ( 1), Me ( 3)] containing the terminal Ni (III)-OR bond, characterized by UV-vis, electron paramagnetic resonance, cyclic voltammetry, and single-crystal X-ray diffraction, were isolated from the reaction of [Ni (III)(Cl)(P(C 6H 3-3-SiMe 3-2-S) 3)] (-) with 3 equiv of [Na][OPh] in tetrahydrofuran (THF)-CH 3CN and the reaction of complex 1 with 1 equiv of [Bu 4N][OMe] in THF-CH 3OH, respectively. Interestingly, the addition of complex 1 into the THF-CH 3OH solution of [Me 4N][OH] also yielded complex 3. In contrast to the inertness of complex [Ni (III)(Cl)(P(C 6H 3-3-SiMe 3-2-S) 3)] (-) toward 1 equiv of [Na][OPh], the addition of 1 equiv of [Na][OMe] into a THF-CH 3CN solution of [Ni (III)(Cl)(P(C 6H 3-3-SiMe 3-2-S) 3)] (-) yielded the known [Ni (III)(CH 2CN)(P(C 6H 3-3-SiMe 3-2-S) 3)] (-) ( 4). At 77 K, complexes 1 and 3 exhibit a rhombic signal with g values of 2.31, 2.09, and 2.00 and of 2.28, 2.04, and 2.00, respectively, the characteristic g values of the known trigonal-bipyramidal Ni (III) [Ni (III)(L)(P(C 6H 3-3-SiMe 3-2-S) 3)] (-) (L = SePh, SEt, Cl) complexes. Compared to complexes [Ni (III)(EPh)(P(C 6H 3-3-SiMe 3-2-S) 3)] (-) [E = S ( 2), Se] dominated by one intense absorption band at 592 and 590 nm, respectively, the electronic spectrum of complex 1 coordinated by the less electron-donating phenoxide ligand displays a red shift to 603 nm. In a comparison of the Ni (III)-OMe bond length of 1.885(2) A found in complex 3, the longer Ni (III)-OPh bond distance of 1.910(3) A found in complex 1 may be attributed to the absence of sigma and pi donation from the [OPh]-coordinated ligand to the Ni (III) center.     

Synthesis, crystal structures, and reactivity of osmium(II) and -(IV) complexes containing a dithioimidodiphosphinate ligand

Reduction of trans-[OsL2(O)2] (1) (L-=[N(i-Pr2PS)2]-) with hydrazine hydrate afforded a dinitrogen complex 2, possibly "[OsL2(N2)(solv)]" (solv=H2O or THF), which reacted with RCN, R'NC, and SO2 to give trans-[OsL2(RCN)2] (R=Ph (3), 4-tolyl (4), 4-t-BuC6H4 (5)), trans-[OsL2(R'NC)2] (R'=2,6-Me2C6H3 (xyl) (6), t-Bu (7)), and [Os(L)2(SO2)(H2O)] (8) complexes, respectively. Protonation of compounds 2, 3, and 6 with HBF4 led to formation of dicationic trans-[Os(LH)2(N2)(H2O)][BF4]2 (9), trans-[Os(LH)2(PhCN)2][BF4]2 (10), and trans-[Os(LH)2(xylNC)2][BF4]2 (11), respectively. Treatment of 1 with phenylhydrazine and SnCl2 afforded trans-[OsL2(N2Ph)2] (12) and trans-[OsL2Cl2] (13), respectively. Air oxidation of compound 2 in hexane/MeOH gave the dimethoxy complex trans-[OsL2(OMe)2] (14), which in CH2Cl2 solution was readily air oxidized to 1. Compound 1 is capable of catalyzing aerobic oxidation of PPh3, possibly via an Os(IV) intermediate. The formal potentials for the Os-L complexes have been determined by cyclic voltammetry. The solid-state structures of compounds 4, 6, cis-8, 13, and 14 have been established by X-ray crystallography.     

Tetravalent titanium, zirconium, and cerium oxo and peroxo complexes containing an imidodiphosphinate ligand

Dinuclear Ti(IV), Zr(IV), and Ce(IV) oxo and peroxo complexes containing the imidodiphosphinate ligand [N(i-Pr(2)PO)(2)](-) have been synthesized and structurally characterized. Treatment of Ti(O-i-Pr)(2)Cl(2) with KN(i-Pr(2)PO)(2) afforded the Ti(IV) di-μ-oxo complex [Ti{N(i-Pr(2)PO)(2)}(2)](2)(μ-O)(2) (1) that reacted with 35% H(2)O(2) to give the peroxo complex Ti[N(i-Pr(2)PO)(2)](2)(η(2)-O(2)) (2). Treatment of HN(i-Pr(2)PO)(2) with Zr(O-t-Bu)(4) and Ce(2)(O-i-Pr)(8)(i-PrOH)(2) afforded the di-μ-peroxo-bridged dimers [M{N(i-Pr(2)PO)(2)}(2)](2)(μ-O(2))(2) [M = Zr (3), Ce (4)]. 4 was also obtained from the reaction of Ce[N(i-Pr(2)PO)(2)](3) with 35% H(2)O(2). Treatment of (Et(4)N)(2)[CeCl(6)] with 3 equiv of KN(i-Pr(2)PO)(2) afforded Ce[N(i-Pr(2)PO)(2)](3)Cl (5). Reaction of (Et(4)N)(2)[CeCl(6)] with 2 equiv of KN(i-Pr(2)PO)(2) in acetonitrile, followed by treatment with Ag(2)O, afforded the μ-oxo-bridged complex [Ce{N(i-Pr(2)PO)(2)}Cl](2)[μ-N(i-Pr(2)PO)(2)](2)(μ-O) (6). 6 undergoes ligand redistribution in CH(2)Cl(2) in air to give 5. The solid-state structures of [K(2){N(i-Pr(2)PO)(2)}(2)(H(2)O)(8)](n) and complexes 1-6 have been determined.     

Synthesis and reactivity studies of palladium(II) complexes containing the N-phosphorylated iminophosphorane-phosphine ligands Ph2PCH2P{=NP(=O)(OR)2}Ph2 (R=Et, Ph): application to the catalytic synthesis of 2,3-dimethylfuran

Reactions of [PdCl2(COD)] with 1 equiv. of the iminophosphorane-phosphine ligands Ph2PCH2P{=NP(=O)(OR)2}Ph2 (R=Et, Ph) lead to the novel Pd(II) derivatives cis-[PdCl2(kappa2-(P,N)-Ph2PCH2P{=NP(=O)(OR)2}Ph2)] (R=Et, Ph). Pd-N bond cleavage readily takes place upon treatment of these species with a variety of two-electron donor ligands. By this way, complexes cis-[PdCl2(kappa1-(P)-Ph2PCH2P{=NP(=O)(OR)2}Ph2)(L)] (R=Et, L=CNtBu, CN-2,6-C6H3Me2, py, P(OMe)3, P(OEt)3; R=Ph, L=CNtBu, CN-2,6-C6H3Me2, py, P(OMe)3, P(OEt)3) have been synthesized in high yields. The addition of two equivalents of ligands to dichloromethane solutions of [PdCl2(COD)] results in the formation of complexes trans-[PdCl2(kappa1-(P)-Ph2PCH2P{=NP(=O)(OR)2}Ph2)2] (R=Et, Ph), which can be converted into the dicationic species [Pd(Ph2PCH2P{=NP(=O)(OR)2}Ph2)2][SbF6]2 (R=Et, Ph) by treatment with AgSbF6. Complex also reacts with CNtBu to afford trans-[Pd(kappa1(P)-Ph2PCH2P{=NP(=O)(OPh)2}Ph2)2(CNtBu)2][SbF6]2. The structures of and have been determined by single-crystal X-ray diffraction methods. In addition, the ability of these Pd(II) complexes to promote the catalytic cycloisomerization of (Z)-3-methylpent-2-en-4-yn-1-ol into 2,3-dimethylfuran has also been studied.     

Further characterization of Mitsunobu-type intermediates in the reaction of dialkyl azodicarboxylates with P(III) compounds

Structural characterization of compounds analogous to the proposed intermediates in the Mitsunobu esterification process is achieved by the combined use of NMR spectroscopy and X-ray diffractometric studies. The results show that compounds (t-BuNH)P(mu-N-t-Bu)(2)P[(N-t-Bu)(N-(CO(2)R)-N(H)(CO(2)R))] [R = Et (11), i-Pr (12)], obtained by treating [(t-Bu-NH)P-mu-N-t-Bu](2) (10) with diethylazodicarboxylate (DEAD) or diisopropylazodicarboxylate (DIAD), respectively, have a structure with the NH proton residing between the two nitrogen atoms ((P)N(t-Bu) and (P)N-N(CO(2)Et)); this is the tautomeric form of the expected betaine (t-BuNH)P(mu-N-t-Bu)(2)P(+)[(NH-t-Bu)(N-(CO(2)R)-N(-)(CO(2)R)]. Treatment of ClP(mu-N-t-Bu)(2)P[(N-t-Bu){N-(CO(2)-i-Pr)-N(H)(CO(2)-i-Pr)] (6) with 2,6-dicholorophenol affords (2,6-Cl(2)-C(6)H(3)-O)P(mu-N-t-Bu)(2)P(+)[(NH-t-Bu){N[(CO(2)i-Pr)(HNCO(2)i-Pr)]}](Cl(-))(2,6-Cl(2)-C(6)H(3)-OH) (14) that has a structure similar to that of (CF(3)CH(2)O)P(mu-N-t-Bu)(2)P(+)[(NH-t-Bu){N[(CO(2)i-Pr)(HNCO(2)i-Pr)]}](Cl(-)) (13), but with an additional hydrogen bonded phenol. Both of these have the protonated betaine structure analogous to that of Ph(3)P(+)N(CO(2)R)NH(CO(2)R)(R'CO(2))(-) (2) proposed in the Mitsunobu esterification. Two other compounds, (ArO)P(mu-N-t-Bu)(2)P(+)(NH-t-Bu){N(CO(2)i-Pr)(HNCO(2)i-Pr)}(Cl(-)) [Ar = 2,6-Me(2)C(6)H(3)O- (15) and 2-Me-6-t-Bu-C(6)H(3)-O- (16)], are also prepared by the same route. Although NMR tube reactions of 11 or 12 with tetrachlorocatechol, catechol, 2,2'-biphenol, and phenol revealed significant changes in the (31)P NMR spectra, attempted isolation of these products was not successful. On the basis of (31)P NMR spectra, the phosphonium salt structure (t-BuNH)P(mu-N-t-Bu)(2)P(+)[(HN-t-Bu){N-(CO(2)R)-N(H)(CO(2)R)](ArO(-)) is proposed for these. The weakly acidic propan-2-ol or water did not react with 11 or 12. Treatment of 12 with carboxylic acids/ p-toluenesulfonic acid gave the products (t-BuNH)P(mu-N-t-Bu)(2)P(+)[(HN-t-Bu){N-(CO(2)-i-Pr)-N(H)(CO(2)-i-Pr)](ArCO(2)(-)) [Ar = Ph (18), 4-Cl-C(6)H(4)CH(2) (19), 4-Br-C(6)H(4) (20), 4-NO(2)-C(6)H(4) (21)] and (t-BuNH)P(mu-N-t-Bu)(2)P(+)[(HN-t-Bu){N-(CO(2)-i-Pr)-N(H)(CO(2)-i-Pr)](4-CH(3)-C(6)H(4)SO(3)(-)) (22) that have essentially the same structure as 2. Compound 18 has additional stabilization by hydrogen bonding, as revealed by X-ray structure determination. Finally it is shown that the in situ generated (t-BuNH)P(mu-N-t-Bu)(2)P(+)[(HN-t-Bu){N-(CO(2)Et)-N(H)(CO(2)Et)](4-NO(2)-C(6)H(4)CO(2)(-)) can also effect Mitsunobu esterification. A comparison of the Ph(3)P-DIAD system with the analogous synthetically useful Ph(3)P-dimethyl acetylenedicarboxylate (DMAD) system is made.     

Dinitrogen partial reduction by formally zero- and divalent vanadium complexes supported by the bis-iminopyridine system

Reduction of the two trivalent 2,6-{[2,6-(i-Pr)2C6H5]N=C(CH3)}2(C5H3N)VCl3 and {[2,6-{[2,6-(i-Pr)2C6H3]N-C=(CH2)}2(C5H3N)]VCl(THF) complexes with excess NaH afforded two corresponding end-on dinitrogen-bridged complexes [2,6-{[2,6-(i-Pr)2C6H5]N=C(CH3)}2(C5H3N)V]2(m-N2).(hexane) (1) and [{[2,6-{[2,6-(i-Pr)2C6H3]N-C=(CH2)}2(C5H3N)]V]2(m-N2).(hexane) (3). Despite their very close structural similarity, the two species have completely different natures. The first is paramagnetic and may be regarded as generated by the two-electron attack of two formally zerovalent vanadium moieties on the same N2 unit. In the nearly diamagnetic 3 instead, the N2 unit has been reduced by two vanadium atoms, formally divalent. Structural analysis and DFT calculations have indicated that partial reduction of the bridging nitrogen occurred for both complexes while, in the case of 1, substantial metal-to-ligand electron transfer also occurs.     

Dinitrogen activation, partial reduction, and formation of coordinated imide promoted by a chromium diiminepyridine complex

Reduction of {2,6-[2,6-(i-Pr)2PhN=C(CH3)]2(C5H3N)}CrCl (3) with NaH afforded the dinuclear dinitrogen complex {[{2,6-[2,6-(i-Pr)2PhN=C(CH3)]2(C5H3N)}Cr(THF)]2(mu-N2)}.THF (5). Reaction carried in exclusion of dinitrogen afforded instead deprotonation of the ligand with the formation of {2-[2,6-(i-Pr)2PhN=C(CH3)]-6-[2,6-(i-Pr)2PhNC=CH2](C5H3N)}Cr(THF) (4). Further reduction of 5 with NaH yielded a curious dinuclear compound formulated as [{2,6-[2,6-(i-Pr)2PhN=C(CH3)]2(C5H3N)}Cr(THF)][{2-[2,6-(i-Pr)2PhN=C(CH3)]-6-[2,6-(i-Pr)2PhNC=CH2](C5H3N)}Cr(THF)](mu-N2 H)(mu-Na)2 (6) containing two sodium atoms only bound to the dinitrogen unit and the pi systems of the two diiminepyridine ligands. Subsequent reduction with NaH triggered a complex series of events, leading to the formation of a species formulated as {2-[2,6-(i-Pr)2PhN=C(CH3)]-6-[2,6-(i-Pr)2PhNC=CH2](C5H3N)}Cr(mu-NH)][Na(THF)] (7) on the basis of crystallographic, spectroscopic, isotopic labeling, and chemical degradation experiments.     

Dinuclear palladium-azido complexes containing thiophene derivatives: reactivity toward organic isocyanides and isothiocyanates

Cyclopalladated tetranuclear Pd(II) complexes, [Pd2(micro-Cl)2(Y)]2 (Y = L1 or L2; H2L1 = di(2-pyridyl)-2,2'-bithiophene; H2L2 = 5,5'-di(2-pyridyl)-2,2':5',2'-terthiophene), containing two pyridyl-alpha, alpha'-disubstituted derivatives of thiophene were prepared. Treating these products with PR3 and subsequently with NaN3 produced the dinuclear Pd-azido complexes [(PR3)2(N3)Pd-Y-Pd(N3)(PR3)2] (Y = L1 or L2) or a cyclometallated complex [(PR3)(N3)Pd-Y'-Pd(N3)(PR3)] (Y' = C,N-L2). Reactions of these Pd-azido complexes with CN-Ar (Ar = 2,6-Me(2)C(6)H(3), 2,6-i-Pr(2)C(6)H(3)) or R-NCS (R = i-Pr, Et, allyl) led to the complexes containing end-on carbodiimido groups [(PMe3)2(N[double bond]C[double bond]N-Ar)Pd-Y-Pd(N[double bond]C[double bond]N-Ar)(PMe3)2] or S-coordinated tetrazole-thiolato groups {(PMe3)2[CN4(R)]S-Pd-Y-Pd-S[CN4)(R)](PMe3)2}. Interestingly, when treated with elemental sulfur, the carbodiimido complexes transformed into the cyclometallated derivatives, [(PMe3)(N[double bond]C[double bond]N-Ar)Pd-Y'-Pd(N[double bond]C[double bond]N-Ar)(PMe3)] (Y' = C,N-L1, C,N-L2). We also report the preparation of linear, thienylene-bridged dinuclear Pd complexes [L2(N3)Pd-X(or X')-Pd(N3)L2] (L = PMe3 or PMe2Ph; H2X = 2,2'-bithiophene or H2X' = 2,2':5',2'-terthiophene) and their reactivity toward organic isocyanide and isothiocyanates.     

Lithium aluminates on a molecular titanium oxide

Lithium aluminates Li[Al(O-2,6-Me(2)C(6)H(3))R'(3)] (R' = Et, Ph) react with the μ(3)-alkylidyne oxoderivative ligands [{Ti(η(5)-C(5)Me(5))(μ-O)}(3)(μ(3)-CR)] [R = H (1), Me (2)] to afford the aluminum-lithium-titanium cubane complexes [{R'(3)Al(μ-O-2,6-Me(2)C(6)H(3))Li}(μ(3)-O)(3){Ti(η(5)-C(5)Me(5))}(3)(μ(3)-CR)] [R = H, R' = Et (5), Ph (7); R = Me, R' = Et (6), Ph (8)]. Complex 7 evolves with the formation of a lithium dicubane species and a Li{Al(μ-O-2,6-Me(2)C(6)H(3))Ph(3)}(2)] unit.     

ETHYLENE POLYMERIZATION AND COPOLYMERIZATION WITH POLAR MONOMERS BY A NEUTRAL NICKEL CATALYST COMBINED WITH CO-CATALYST OF Ni（COD）2 OR AL（i-Bu）3

A neutral nickel (Ⅱ) catalyst D, { [O-(3-cyclohexyl)(5-Cl)C6H2-ortho-C(H)=N-2,6-C6H3(i-Pr)2]Ni(Ph3P)(Ph)} has been synthesized and characterized by 1H-NMR, FTIR and elemental analysis. The results indicate that Al(i-Bu)3 is an effective cocatalyst for the neutral nickel catalyst. With bis(1,5-cyclooctadiene) nickel(0) [Ni(COD)2] or Al(i-Bu)3 as a cocatalyst, the neutral nickel catalyst D is active for ethylene polymerisation and copolymerisation with polar monomers (tertbutyl 10-undecenoate(BU), methyl 10-undecenoate (MU), allyl alcohol (AA) and 4-penten-1-ol (PO)) under mild conditions.The resulting polymers were characterized by 1H-NMR, FTIR, DSC, and GPC. From the comparative studies, Ni(COD)2 is more active than Al(i-Bu)3 for ethylene homopolymerization, while Al(i-Bu)3 is more effective than Ni(COD)2 for ethylene copolymerisation with polar monomers. The polymerization parameters which affect both the catalytic activity and properties of the resulting polyethylene were investigated in detail. Under the conditions of 20 μmol catalyst D and Ni(COD)2/D = 3(molar ratio) in 30 mL toluene solution at 45℃, 12 × 105 Pa ethylene for 20 min, the polymerization activity reaches as High as7.29×105gPE.(mol.Ni·h)-1and Mηis 7.16×104g.mol-1.For ethylene copolymerization with polar monomers,the effect of comonomer concentrations was examined. As high as 0.97 mol% of MU, 1.06 mol% of BU, 1.04 mol% of AA and 1.37 mol% of PO were incorporated into the polymer, respectively, catalyzed by D/Al(i-Bu)3 system.     

Bulky guanidinato nickel(I) complexes: synthesis, characterization, isomerization, and reactivity studies

Reactions of lithium complexes of the bulky guanidinates [{(Dip)N}(2)CNR(2)](-) (Dip=C(6)H(3)iPr(2)-2,6; R=C(6)H(11) (Giso(-)) or iPr (Priso(-)), with NiBr(2) have afforded the nickel(II) complexes [{Ni(L)(μ-Br)}(2)] (L=Giso(-) or Priso(-)), the latter of which was crystallographically characterized. Reduction of [{Ni(Priso)(μ-Br)}(2)] with elemental potassium in benzene or toluene afforded the diamagnetic species [{Ni(Priso)}(2)(μ-C(6)H(5)R)] (R=H or Me), which were shown, by X-ray crystallographic studies, to possess nonplanar bridging arene ligands that are partially reduced. A similar reduction of [{Ni(Priso)(μ-Br)}(2)] in cyclohexane yielded a mixture of the isomeric complexes [{Ni(μ-κ(1)-N-,η(2)-Dip-Priso)}(2)] and [{Ni(μ-κ(2)-N,N'-Priso)}(2)], both of which were structurally characterized. These complexes were also formed through arene elimination processes if [{Ni(Priso)}(2)(μ-C(6)H(5)R)] (R=H or Me) were dissolved in hexane. In that solvent, diamagnetic [{Ni(μ-κ(1)-N-,η(2)-Dip-Priso)}(2)] was found to slowly convert to paramagnetic [{Ni(μ-κ(2)-N,N'-Priso)}(2)], suggesting that the latter is the thermodynamic isomer. Computational analysis of a model of [{Ni(μ-κ(2)-N,N'-Priso)}(2)] showed it to have a Ni-Ni bond that has a multiconfigurational electronic structure. An analogous copper(I) complex [{Cu(μ-κ(2)-N,N'-Giso)}(2)] was prepared, structurally authenticated, and found, by a theoretical study, to have a negligible Cu···Cu bonding interaction. The reactivity of [{Ni(Priso)}(2)(μ-C(6)H(5)Me)] and [{Ni(μ-κ(2)-N,N'-Priso)}(2)] towards a range of small molecules was examined and this gave rise to diamagnetic complexes [{Ni(Priso)(μ-CO)}(2)] and [{Ni(Priso)(μ-N(3))}(2)]. Taken as a whole, this study highlights similarities between bulky guanidinate ligands and the β-diketiminate ligand class, but shows the former to have greater coordinative flexibility.     

Metal versus ligand alkylation in the reactivity of the (bis-iminopyridinato)Fe catalyst

The alkylation of the Brookhart-Gibson {2,6-[2,6-(i-Pr)2PhN=C(CH3)]2(C5H3N)} FeCl2 precatalyst with 2 equiv of LiCH2Si(CH3)3 led to the isolation of several catalytically very active products depending on the reaction conditions. The expected dialkylated species {2,6-[2,6-(i-Pr)2PhN=C(CH3)]2}(C5H3N)Fe(CH2SiMe3)2 (2) was indeed the major component of the reaction mixture. However, other species in which alkylation occurred at the pyridine ring ortho position, {2,6-[2,6-(i-Pr)2PhN=C(CH3)]2-2-CH2SiMe3}(C5H3N)Fe(CH2SiMe3) (1), and at the imine C atom, {2-[2,6-(i-Pr)2PhN=C(CH3)]-6-[2,6-(i-Pr)2PhNC(CH3)(CH2 SiMe3)](C5H3N)}Fe(CH2SiMe3) (3), have also been isolated and fully characterized. In addition, deprotonation of the methyl-imino functions and formation of a new divalent Fe catalyst {[2,6-[2,6-(i-Pr)2PhN-C=(CH2)]2(C5H3N)}Fe(mu-Cl)Li(THF)3 (4) also occurred depending on the reaction conditions. In turn, the formation of 4 might trigger the reductive coupling of two units through the methyl-carbon wings. This process resulted in the one-electron reduction of the metal center, affording a dinuclear Fe(I) alkyl catalyst {[{[2,6-(i-Pr)2C6H5]N=C(CH3)}(C5H3N){[2,6-(i-Pr)26H5]N=CCH2}Fe(CH2SiMe3)]}2 (5). Different from other metal derivatives, complex 5 could not be prepared from the monodeprotonated version of the ligand. Its reaction with a mixture of FeCl2 and RLi afforded instead [{2,6-[2,6-(i-Pr)2PhN-C=(CH2)]2(C5H3N)}FeCH2Si(CH3)3][Li(THF)4] (6) which is also catalytically active. All of these high-spin species have been shown to have high catalytic activity for olefin polymerization, producing polymers of two distinct natures, depending on the formal oxidation state of the metal center.     

Nickel complexes of carboxylate-containing polydentate ligands as models for the active site of urease

Two new carboxylate-containing polydentate ligands have been synthesized, the symmetric ligand 2,6-bis[N-(N-(carboxylmethyl)-N-((1-methylimidazol)methyl)amine)methyl]-4-methylphenolate (BCIMP) and the corresponding asymmetric ligand 2-(N-isopropyl-N-((1-aminomethyl)-4-methylphenol (ICIMP). The ligands have been used to prepare model complexes for the active site of the dinuclear nickel enzyme urease, viz. [Ni(2)(BCIMP)Ac(2)](-) (6), [Ni(2)(BCIMP)(Ph(2)Ac)(2)](-) (7), [Ni(2)(ICIMP)(Ph(2)Ac)(2)] (14), [Ni(4)(ICIMP)(2)(Ph(2)Ac)(2)][ClO(4)](2) (15), [Ni(4)(ICIMP)(2)(Ph(2)Ac)(2)(DMF)(2)][ClO(4)](2) (16), and [Ni(4)(ICIMP)(2)(Ph(2)Ac)(2)(urea)(H(2)O)][ClO(4)](2) (17), where the latter complex contains urea coordinated in a unidentate fashion through the carbonyl oxygen. The N(2)O-N(2)O(2) donor set of ICIMP provides a good framework for the preparation of urease models, but in some cases tetranuclear nickel complexes are formed due to coordination of the carboxylate moiety of one dinickel-ICIMP unit to one or both of the nickels of a second Ni(2) unit. Reactivity and kinetics studies of 7 and 15 show that these model complexes catalyze hydrolysis of 2-hydroxypropyl p-nitrophenyl phosphate (HPNP) at basic pH. In this assay, complexes based on the asymmetric ligand ICIMP exhibit a significantly faster rate of hydrolysis than the corresponding BCIMP complexes. Magnetic measurements indicate that there are weak antiferromagnetic interactions between the nickel ions in complex 16.     

Kinetic evidence for intramolecular proton transfer between nickel and coordinated thiolate

The complexes [Ni(YR)(triphos)]BPh(4) (Y = S, R = Ph or Et or Y = Se, R = Ph; triphos = (Ph(2)PCH(2)CH(2))(2)PPh) have been prepared and characterized, and the X-ray crystal structure of [Ni(SPh)(triphos)]BPh(4) has been solved. In MeCN, [Ni(YR)(triphos)](+) are protonated by [lutH](+) (lut = 2,6-dimethylpyridine) to give [Ni(YHR)(triphos)](2+). Studies on the kinetics of these equilibrium reactions reveal an unexpected difference in the reactivities of [Ni(SPh)(triphos)](+) and [Ni(SEt)(triphos)](+). In both cases, the reactions exhibit a first-order dependence on the concentration of complex. When R = Ph, the dependence on the concentrations of [lutH(+)] and lut is given by k(obs) = k(1)(Ph)[lutH(+)] + k(-1)(Ph)[lut], which is typical of an equilibrium reaction where k(1)(Ph) and k(-1)(Ph) correspond to the forward and back reactions, respectively. Analogous behavior is observed for [Ni(SePh)(triphos)](+). However, for [Ni(SEt)(triphos)](+), the kinetics are more complicated, and k(obs) = (k(1)k(2)[lutH(+)] + (k(-2) + k(2)))/(k(1)[lutH(+)] + k(-1)[lut]), which is indicative of a mechanism involving two coupled equilibria in which the initial protonation of the thiolate is followed by a unimolecular equilibrium reaction that is assumed to involve the formation of an eta(2)-EtS-H ligand. The difference in reactivity between the complexes with alkyl and aryl thiolate ligands is a consequence of the (Ni(triphos))(2+) site "leveling" the basicities of these ligands. The pK(a)'s of the PhSH and EtSH constituents coordinated to the (Ni(triphos))(2+) are 16.0 and 14.6, respectively, whereas the difference in pK(a)'s of free PhSH and EtSH differ by ca. 4 units. The pK(a) of [Ni(SeHPh)(triphos)](+) is 14.4. The more strongly sigma-donating EtS ligand makes the (Ni(triphos))(2+) core sufficiently electron-rich that the basicities of the sulfur and nickel in [Ni(SEt)(triphos)](+) are very similar; therefore, the proton serves as a bridge between the two sites. The relevance of these observations to the proposed mechanisms of nickel-based hydrogenases is discussed.