Effect of thermal deformation on giant magnetoresistance of flexible spin valves grown on polyvinylidene fluoride membranes

We fabricated flexible spin valves on polyvinylidene fluoride(PVDF) membranes and investigated the influence of thermal deformation of substrates on the giant magnetoresistance(GMR) behaviors. The large magnetostrictive Fe_(81)Ga_(19)(Fe Ga) alloy and the low magnetostrictive Fe_(19)Ni_(81)(Fe Ni) alloy were selected as the free and pinned ferromagnetic layers.In addition, the exchange bias(EB) of the pinned layer was set along the different thermal deformation axes α_(31) or α_(32) of PVDF. The GMR ratio of the reference spin valves grown on Si intrinsically increases with lowering temperature due to an enhancement of spontaneous magnetization. For flexible spin valves, when decreasing temperature, the anisotropic thermal deformation of PVDF produces a uniaxial anisotropy along the α_(32) direction, which changes the distribution of magnetic domains. As a result, the GMR ratio at low temperature for spin valves with EB α_(32)becomes close to that on Si, but for spin valves with EB α_(31)is far away from that on Si. This thermal effect on GMR behaviors is more significant when using magnetostrictive Fe Ga as the free layer.     

Magnetoresistance of Fe3O4/Au/Fe3O4 and Fe3O4/Au/Fe spin-valve structures

A detailed study of the in-plane magnetotransport properties of spin valves with one and two Fe₃O₄ electrodes is presented. Fe₃O₄/Au/Fe₃O₄ spin valves exhibit a clear anisotropic magnetoresistance in small magnetic fields but no giant magnetoresistance (GMR). The absence of GMR in these structures is due to simultaneous magnetization reversal in the two Fe₃O₄ layers. By contrast, a negative GMR effect is measured on Fe₃O₄/Au/Fe spin valves. The negative GMR is attributed to an electron spin scattering asymmetry at the Fe₃O₄/Au interface or an induced spin scattering asymmetry in the Au interfacial layers.     

IrMn基反铁磁自旋阀的巨磁电阻效应

用第一性原理方法研究了在微观尺度具有三重对称磁结构的IrMn合金的反铁磁自旋阀(AFSV)的电子输运.研究表明:基于有序L1₂相IrMn合金的Co/Cu/IrMn自旋阀的巨磁电阻(GMR)效应具有三重对称性,可以利用这一特性区分反铁磁材料的GMR与传统铁磁材料的GMR.基于无序γ相IrMn合金的IrMn(0.84 nm)/Cu(0.42 nm)/IrMn(0.42 nm)/Cu(0.42 nm)(111) AFSV的电流平行平面构型的GMR约为7.7％,大约是电流垂直平面构型的GMR(3.4％)的两倍,明显大于实验中观测到的基于共线磁结构的FeMn基AFSV的GMR. 关键词： 反铁磁自旋阀 巨磁电阻效应 非共线磁结构 电流平行平面结构     

Giant magnetoresistance in ferromagnet/superconductor superlattices

We show magnetoresistance in excess of 1000% in trilayers containing highly spin-polarized La0.7Ca0.3MnO3 and high-Tc superconducting YBa2Cu3O7. This large magnetoresistance is reminiscent of the giant magnetoresistance (GMR) in metallic superlattices but with much larger values, and originates at spin imbalance due to the injection of spin-polarized carriers. Furthermore, in contrast to ordinary GMR, the magnetoresistance is intimately related to the superconductivity in the YBa2Cu3O7 layer and vanishes in the normal state. This result, aside from its fundamental importance, may be of interest for the design of novel spintronic devices based on ferromagnet/superconductor structures.     

Temperature dependence of transport properties in ZnS-based magnetic tunnel junctions

We have recently evidenced a junction magnetoresistance (JMR) signal of about 5% in magnetic tunnel junctions (MTJs) with ZnS as tunnel barrier layer. The MTJ were grown by magnetron sputtering on Si (1 1 1) substrate at room temperature and have the following structure: Fe_6 nmCu_30 nmCoFe_1.8 nmRu_0.8 nmCoFe_3 nmZnS_2 nmCoFe_1 nmFe_4 nmCu_10 nmRu_3 nm.

The hard magnetic bottom electrode consists of an artificial antiferromagnetic structure in which the rigidity is ensured by the antiferromagnetic exchange coupling between two FeCo layers through an Ru spacer layer. The magneto-transport for these MTJ has been studied at various temperatures to gain understanding of the transport mechanism in such junctions. A strong and linear increase of the JMR is observed as the temperature is decreased to reach 10% at a low temperature, while the conductance decreases with decreasing temperature. To understand the mechanism at the origin of these behaviors, the contribution of magnon is taken into account. It is concluded that the observed behaviors are not only related to the magnon contribution but that resonant low-level states inside the barrier can assist the tuneling transport.     

Structural effects in the growth of giant magnetoresistance (GMR) spin valves

An investigation has been made of the thin-film structure and interface morphology of giant magnetoresistance (GMR) spin valves of the cobalt/copper/cobalt (Co/Cu/Co) type that were grown on polycrystalline NiO substrates at three different temperatures (150, 300 and 450 K). Sputter-depth-profile analyses indicate that the quality of the layering in the Co/Cu/Co structure was only slightly better for the 150 K sample than for the 300 K sample. For the 450 K sample, however, the Co/Cu/Co structure showed extensive disruption. The similarity in the depth-profiles for the 150 and 300 K samples indicates the sensitivity of the GMR to subtle structural differences.     

The temperature dependence of the perpendicular giant magnetoresistance in Co/Cu multilayered nanowires

A theory, based on earlier work by Valet and Fert, is first presented to describe the influence of temperature on the perpendicular giant magnetoresistance (GMR) in multilayers. Then we present GMR measurements performed at T=77 K and at room temperature on Co/Cu multilayered nanowires with layer thicknesses ranging from a few nm to 1 μm. We use our model to obtain a good quantitative fit to the experimental results in both the short spin diffusion length limit and out of this limit. We discuss the temperature dependence of the bulk parameters, the scattering spin asymmetry coefficient and spin diffusion length in the Co layers. Received: 25 January 1998 / Accepted: 6 May 1998     

Perpendicular giant magnetoresistance in magnetic multilayered nanowires

We present giant magnetoresistance (GMR) measurements performed on electrodeposited Co/Cu multilayered nanowires. The variation of the GMR with the thicknesses of the Cu and Co layers over wide ranges is discussed in the framework of the Valet-Fert model for perpendicular GMR. The interface and bulk spin-dependent scattering parameters as well as the spin diffusion lengths in the nonmagnetic and ferromagnetic layers are extracted from this analysis.     

不同过渡层上Co/Cu/Co三明治结构的巨磁电阻效应研究

通过对不同过渡层上Co(5.5nm)/Cu(3.5nm)/Co(5.5nm)三明治结构的研究,发现过渡层的磁性及过渡层诱导的三明治晶格结构对材料的巨磁电阻效应有重要影响.反铁磁Cr过渡层由于和相邻铁磁Co层之间存在着反铁磁耦合,可以获得6％以上的巨磁电阻值,但它同时使材料的矫顽力较大,因此磁灵敏度不高.Ni和Ti过渡层上Co/Cu/Co三明治结构,由于形成了强的（111）织构,其巨磁电阻值也达到5％以上.磁性材料Ni过度层还使三明治结构材料的矫顽力大为下降,从而显著提高了材料的磁灵敏度. 关键词：     

Thermal stability of spin valve sensors using artificial Co/Ir based ferrimagnets

Hard-soft spin valve structures have been grown by molecular beam epitaxy on MgO(0 0 1) substrates. The hard magnetic layer consists of an artificial Co/Ir/Co ferrimagnet system (AFi), while a Fe/Co bilayer from the buffer has been used as a soft detection layer. The Fe layer has been grown at 600°C giving rise to a monocrystalline layer with a BCC structure. Consequently, this layer presents a hard and a easy magnetization axis, respectively, along the BCC [1 1 0] and the [1 0 0] directions. The AFi system presents dramatic differences after successive annealing steps up to 350°C. An increase of the GMR from 3% to 3.5% is observed after annealing at 250°C while the coercive field of the AFi and the GMR plateau are strongly reduced. After further annealing at higher temperature the GMR drops down accompanied with a strong decrease in the antiparallel alignment amount in the AFi system. Rutherford back scattering measurements have been performed to investigate the changes in the interface morphology and to correlate it to the magneto-transport properties.     

Probing the magnetization switching with in-plane magnetic anisotropy through field-modified magnetoresistance measurement

Effective probing current-induced magnetization switching is highly required in the study of emerging spin-orbit torque(SOT)effect.However,the measurement of in-plane magnetization switching typically relies on the giant/tunneling magnetoresistance measurement in a spin valve structure calling for complicated fabrication process,or the non-electric approach of Kerr imaging technique.Here,we present a reliable and convenient method to electrically probe the SOT-induced in-plane magnetization switching in a simple Hall bar device through analyzing the MR signal modified by a magnetic field.In this case,the symmetry of MR is broken,resulting in a resistance difference for opposite magnetization orientations.Moreover,the feasibility of our method is widely evidenced in heavy metal/ferromagnet(Pt/Ni₂₀Fe₈₀ and W/Co₂₀Fe₆₀B₂₀)and the topological insulator/ferromagnet(Bi₂Se₃/Ni₂₀Fe₈₀).Our work simplifies the characterization process of the in-plane magnetization switching,which can promote the development of SOT-based devices.     

Synthetic Co50Pt50/Ru/CoFe hard–soft trilayer in spin valves

The influence of deposition power and seedlayer on the properties of hard magnet Co₅₀Pt₅₀ was studied. Co₅₀Pt₅₀(/Co₉₀Fe₁₀)/Ru/Co₉₀Fe₁₀ trilayer was used as pining/pinned layer in spin valves. The influences of different hard layer, soft layer and free layer on exchange bias, interlayer coupling, and magnetoresistance (MR) ratio were studied. Weak antiferromagnetic interlayer coupling was obtained by adjusting the thickness of hard and soft layers. MR of a spin valve with structure Cr2/CoFe0.5/CoPt4/CoFe0.5/Ru0.8/CoFe2.2/Cu2.05/CoFe2.6/Cu1.1/Ta1 reached 10.68% (unit in nm), which is comparable to those of IrMn-based synthetic spin valves. The increment of the coercivity of the free layer is mainly due to the static magnetic interaction between the hard layer and the free layer.     

O2 plasma oxidation effect on magnetic properties of spin valves

The use of nano-oxide to improve the performance of spin valves has been extensively studied. But most of the investigations so far have been carried out on different samples. This may make some of the conclusions drawn from the experiments inconsistent because of the fluctuation in deposition conditions and device structures. In this work, the effect of nano-oxide on the properties of spin valves has been investigated through post-growth oxidation of the same sample in oxygen plasma for different rf powers and durations. The sample investigated was a bottom spin valve with the structure Si/SiO₂/Ta/NiFe/IrMn/CoFe/Cu/CoFe/Ta. A relative increase of 20% and 12% was obtained in the giant magnetoresistance (GMR) ratio of as-deposited and annealed samples, respectively. It was found that, at a fixed rf power, there is a peak of the GMR ratio as the oxidation time increases. A higher peak value of the GMR ratio was obtained for lower rf power, although the required oxidation time is longer. This result can be well understood by considering both the enhanced specularity at the insulator/metal interface and the loss of magnetic effective thickness of the free layer by the oxidation. Magnetic parameters such as the interlayer coupling field (H₀) and the coercivity of the free layer (H_cf) were also greatly influenced by the oxidation process. When only the Ta layer was oxidized, H₀ increases very slightly, and H_cf increases with the oxidation time. However, when the CoFe free layer was oxidized, a significant increase was found for H₀, and H_cf changes to decreasing. These results can be explained based on the Néel and RKKY coupling models. Received: 25 October 2001 / Accepted: 21 December 2001 / Published online: 3 June 2002     

Co_(2~-)基Heusler合金Co_2FeAl_(1–x)Si_x(x=0.25,x=0.5,x=0.75)的结构、电子结构及热电特性的第一性原理研究

运用基于密度泛函理论的第一性原理方法,对Co_2FeAl_(1–x)Si_x(x=0.25, 0.5, 0.75)系列Heusler合金的电子结构、四方畸变、弹性常数,声子谱以及热电特性进行了计算研究.结果显示, Co_2FeAl_(1–x)Si_x系列合金的电子结构均为半金属特性,向下自旋态(半导体性)均呈现良好的热电特性,并且随着硅原子浓度的增加功率因子随之增加.计算的声子谱不存在虚频,均满足动力学稳定性条件,弹性常数均满足玻恩稳定性条件,机械稳定性均良好.随着晶格常数c/a的比值变化,体系的能量最低点均出现在c/a=1处,即结构稳定性不随畸变度c/a的变化而变化,说明不存在马氏体相变.此系列合金薄膜的电子结构呈现较高的自旋极化率,在替代浓度x=0.75时自旋极化率达到100%,且当x=0.75时薄膜在畸变度c/a=1.2时存在马氏体相变.随着晶格畸变度的改变,总磁矩也发生变化,且主要由Fe和Co两种过渡金属原子的磁矩变化所决定.     

Dual spin valves with nano-oxide layers

A novel method is proposed for increasing the giant magnetoresistance (GMR) of dual spin valves of the CoFe/Cu/CoFe/Cu/CoFe type by inserting nano-oxide layers (NOLs) into the pinned layers. Using this method, MR ratio of 23.5% was obtained, a value equal to those of specular spin valves with antiferromagnetic oxide, e.g., NiO. This method allows the selection of metallic materials for the antiferromagnetic layer. In addition, we obtained the specularity factor of upper NOLs, 0.8, and that of lower NOLs, 0.7, by calculating Boltzmann equations taking into account the roughness of each interlayer. This model shows that the MR ratio would be 27.5% for dual spin valves with ideal NOLs.     

Reduction in critical current density of current-induced magnetization switching

We have investigated the current-induced magnetization switching in an exchange-biased spin valve structure. By using an unpatterned antiferromagnetic layer to pin the fixed Co layer, we obtained a lower switching current density by a factor of 5 than a simple spin valve structure. For the application, it is important to know how to keep the spin polarization when the thicker layer is pinned by an antiferromagnet. The unpatterned pinned ferromagnetic lead can be a good solution for spin-transfer-torque-activated device. The effect of Cu buffer layer on the top of the thin Co and Ru buffer layer under the thick Co layer on the current-induced magnetization switching in cobalt-based trilayer spin valves was also investigated. The experimental results showed that the Ru buffer layer in combination with Cu buffer layer could induce a decrease in the critical switching current by 30%, and an increase in the absolute resistance change by 35%, which is caused by an improvement of a microstructure of a thicker Co polarizer.     

High-resolution electron microscopy study of Ni81Fe19 film with Co33Cr67 buffer layer

The anisotropic magnetoresistance (AMR) in permalloy Ni₈₁Fe₁₉ film deposited on a 1.2 nm Co₃₃Cr₆₇ buffer layer was significantly enhanced. The high-resolution electron microscopy was used to study the microstructure of Ni₈₁Fe₁₉ film with and without Co₃₃Cr₆₇ buffer layer. It was found that Co₃₃Cr₆₇ buffer layer can induce good (1 1 1) texture, while without Co₃₃Cr₆₇ buffer layer, Ni₈₁Fe₁₉ film show randomly oriented grain structure. The Δρ/ρ enhancement is attributed to the decrease in the resistivity ρ of the Ni₈₁Fe₁₉ film due to the formation of the large (1 1 1) textured grains in Ni₈₁Fe₁₉ film with Co₃₃Cr₆₇ buffer layer. However, the surface roughness of substrate may limit the (1 1 1) textured grain size and induce additional grain boundaries in Ni₈₁Fe₁₉ film with Co₃₃Cr₆₇ buffer layer, limit the enhancement of the AMR effect.     

Well-defined Co clusters embedded in an Ag matrix: A model system for the giant magnetoresistance in granular films

Well-defined granular Co/Ag films have been prepared by the co-deposition of in-beam prepared Co clusters and Ag atoms. In this way we were able to study the giant magnetoresistance (GMR) as a function of mean Co cluster size for a fixed Co cluster volume fraction v_cl as well as a function of v_cl for a fixed . Mean Co cluster size has been varied between and 6.9 nm, Co cluster volume fraction between 5 and 43%. The GMR was measured in-situ at T=4.2 K in magnetic fields 1.2 T. The analysis of the GMR data obtained from these studies clearly shows that spin-dependent scattering at the Co-cluster/Ag-matrix interface is the only relevant scattering mechanism causing the GMR in our well-defined samples. Received: 21 April 1998 / Received in final form: 17 May 1998 / Accepted: 18 May 1998     

Current-in-plane giant magnetoresistance: The effect of interface roughness and spin-depolarization due to the proximity of a buffer layer

We report on proximity effects of a Au buffer layer on the current-in-plane giant magnetoresistance effect (CIP-GMR) in high-quality, epitaxial Fe/Cr/Fe(001) trilayers. The lower Fe layer is grown in the shape of a wedge and allows simultaneous preparation of 24 GMR stripe-elements with different lower Fe thicknesses in the range from 13 to 14.5 ML. The layer-by-layer growth mode in combination with the small thickness variation gives rise to: (i) well-controlled roughness changes from stripe to stripe as confirmed by reflection high-energy electron diffraction (RHEED), and (ii) to a varying influence of the underlying Au buffer. The oscillatory roughness variation along the wedge yields an oscillatory GMR behavior as a function of Fe thickness and confirms the previous result that slightly increased interface roughness causes a higher GMR ratio. The proximity of the Au buffer to the GMR trilayer results in an increase of the GMR ratio with increasing Fe thickness. The latter effect is explained by spin-depolarization at the Fe/Au interface and in the bulk of the Au buffer.