Preparation and photoluminescence properties of Y2SiO5:Eu3+ nanocrystals

The sol-emulsion-gel method is used for the preparation of about 5-7 nm size Eu2O3 doped and coated Y2SiO5 nanoparticles at 1300 degrees C. Here, we report the role of surface coating, dopant concentration and temperature of heating on the modification of crystal structure and the photoluminescence properties of Y2SiO5:Eu3+ nanocrystals. It is found that photoluminescence properties are sensitive to the crystal structure which is again controlled by surface coating, concentration and heating temperature. The decay times are 0.76, 1.14, 1.23 and 1.40 ms for 0.25, 0.5, 1.0 and 2.5 mol% Eu2O3 doped Y2SiO5 nanocrystals prepared at 1100 degrees C (X1-Y2SiO5). However, in X2-Y2SiO5 crystal phase (at 1300 degrees C) the average decay times are 1.05, 1.35, 1.55 and 1.60 ms for 0.25, 0.5, 1.0 and 2.5 mol% Eu2O3 doped Y2SiO5 nanocrystals, indicating the photoluminescence properties depend on both the crystal structure and the concentration of ions. The emission intensity of the peak at 612 nm (5D0-->7F2) of the Eu3+-ions is found to be sensitive to the doping and surface coating of Y2SiO5 nanocrystals. The decay times are 1.55 and 1.70 ms for 1300 degrees C heated 1.0 mol% Eu2O3 doped and coated Y2SiO5 nanocrystals, respectively. Our analysis suggests that the site symmetry of ions plays a most important role in the modification of radiative relaxation mechanisms and as a result on the overall photoluminescence properties.     

Role of dopant concentration and surface coating on photophysical properties of CdS: Eu3+ nanocrystals

Here, we report the role of dopant concentration and surface coating of CdS: Eu3+ nanocrystals on the modification of crystal structure and their photoluminescence properties by steady-state and time resolved fluorescence studies. It is found that photoluminescence properties are sensitive to the crystal structure which is controlled by surface coating and dopant concentration. The emission intensity of the peak at 614 nm (5D0 --> 7F2) of the Eu3+-ions is found to be sensitive to the doping and surface coating of CdS nanocrystals. It is found that the average decay times tau are 248, 353 and 499 micros for 0.25, 0.5 and 1.0 mol% Eu ions doped into CdS nanocrystals, respectively. From the decay time measurements, it is evident that the energy transfer occurs from CdS nanoparticles to Eu3+ ions and the calculated energy transfer efficiency from CdS nanoparticles to Eu3+ ions is 9.2 and 35% for Eu3+ ions coated and doped CdS nanoparticles, respectively. Our analysis suggests that site symmetry of ions plays a very important role in the modifications of radiative and nonradiative relaxation mechanisms.     

Luminescence of Ce3+ in Y2SiO5 nanocrystals: Role of crystal structure and crystal size

Here, we report the role of crystal structure and crystal size on the photoluminescence properties of Ce3+ ions in Y2SiO5 nanocrystals. The emission at 430 nm (5d1 --> 4f1) and lifetime of the excited state of Ce3+ ion doped Y2SiO5 nanocrystals are found to be sensitive to the crystal structure, crystal size, and dopant concentration. It is found that the overall lifetime tau of 0.5 mol % Ce doped Y2SiO5 nanocrystals are 8.78 and 3.45 ns for 1000 and 1100 degrees C heat-treated samples with the same crystal structure (X1-Y2SiO5 phase), respectively. However, a significant increase in the overall lifetime (35.21 ns) is observed for the 1300 degrees C annealed 0.5 mol % Ce doped Y2SiO5 sample having a different crystal structure (X2-Y2SiO5 phase). We found that the decay kinetic is biexponential. It is explained that the fast component arises due to sequential hole-electron capture on the luminescent ions and the slow component arises from isolated ions. Our analysis suggests that modifications of radiative and nonraditive relaxation mechanisms are due to local symmetry structure of the host lattice and crystal size, respectively.     

SiO2/LaF3:Eu3＋核壳结构发光粒子的制备与表征

采用简单的液相法合成了SiO2/LaF3:Eu3＋核壳结构发光粒子, 并对其结构及发光性能进行了表征. XRD分析表明包覆层LaF3:Eu3＋为立方晶相结构, 红外光谱表明SiO2颗粒表面有柠檬酸的修饰, 电镜照片表明合成了球形的核-壳结构的复合粒子, 包覆层厚度为10～20 nm, 光谱测试表明核-壳复合粒子与纯的LaF3:Eu3＋具有相同的发光性能, 均以589 nm附近的5D0—7F1磁偶极跃迁为最强发射峰, 说明Eu3＋在LaF3基质中占据的格位相同.     

One-step controllable synthesis for high-quality ultrafine metal oxide semiconductor nanocrystals via a separated two-phase hydrolysis reaction

A one-step synthesis method is described to prepare high-quality ultrafine inorganic semiconductor nanocrystals via a two-phase interface hydrolysis reaction under hydrothermal conditions. With the synthesis of ZrO2 quantum dots as an example, we show that the prepared nanocrystals have good monodispersity and high crystallinity, as well as other related superior properties, e.g., strong photoluminescence and excellent photocatalytic activities. Also the crystal size can be conveniently adjusted in the range below 10 nm through controlling the reaction temperature. Besides that, this method also shows other distinct advantages compared with other methods reported previously. First, the preparation process is simple and cheap and does not contain any complicated posttreatment procedure. Second, products (without coating) can be collected from the organic phase which effectively avoids grain aggregation induced by the capillary concentration in the water environment. Third, the production yield is very high (almost 100%) and the organic and water phases after reaction can be easily recycled for next reaction. Therefore, it provides a promising strategy for the large-scale industrial production of different kinds of high-quality inorganic nanocrystals.     

Structural and spectroscopic properties of LaOF:Eu3+ nanocrystals prepared by the sol-gel Pechini method

A new method was used to obtain Eu(3+)-doped LaOF nanocrystals. The obtained nanocrystals were synthesized for the first time using a modified Pechini sol-gel method. The products were analyzed by X-ray powder diffraction and the Rietveld method. Optimal conditions for the synthesis were found. Luminescent properties of the tetragonal and rhombohedral LaOF:Eu(3+) nanocrystals were investigated by collecting excitation and luminescence spectra. The most effective dopant concentrations in both hosts were found. Luminescent lifetimes were also measured. The time-resolved luminescent traces showed both a growth and a decay, which pointed to energy transfer processes between Eu(3+) ions in the LaOF host. In order to explain these phenomena, an adequate mechanism has been proposed. Intensity parameters Ω(2), Ω(4) and quantum efficiencies were calculated using the Judd-Ofelt theory, allowing for an extensive study of the luminescent properties of Eu(3+) ion in the LaOF matrix.     

Lanthanide‐Doped Nanocrystals: Strategies for Improving the Efficiency of Upconversion Emission and Their Physical Understanding

The fundamental understanding of lanthanide‐doped upconverted nanocrystals remains a frontier area of research because of potential applications in photonics and biophotonics. Recent studies have revealed that upconversion luminescence dynamics depend on host crystal structure, size of the nanocrystals, dopant concentration, and core–shell structures, which influence site symmetry and the distribution and energy migration of the dopant ions. In this review, we bring to light the influences of doping/co‐doping concentration, crystal phase, crystal size of the host, and core–shell structure on the efficiency of upconversion emission. Furthermore, the lattice strain, due to a change in the crystal phase and by the core–shell structure, strongly influences the upconversion emission intensity. Analysis suggests that the local environment of the ion plays the most significant role in modification of radiative and nonradiative relaxation mechanisms of overall upconversion emission properties. Finally, an outlook on the prospects of this research field is given.     

Fe3O4@SiO2@YF3∶Eu3+磁-光双功能复合粒子的制备与性能

采用水热法合成了Fe3O4@SiO2@YF3∶Eu3+磁-光双功能复合粒子,对其结构和性能进行了表征。XRD分析表明:Fe3O4表面包覆上了结晶良好的正交晶系的YF3。TEM照片表明:复合粒子为球形,构成核的Fe3O4颗粒的尺寸在200～350 nm之间,Fe3O4@SiO2@YF3∶Eu3+核壳结构复合粒子的尺寸约为230～380 nm,与包覆前的Fe3O4相比较,包覆后,颗粒尺寸增大,并且YF3∶Eu3+是以棒状结构连接在Fe3O4球型颗粒的表面。磁性和荧光光谱分析表明:该复合颗粒同时具有良好的发光性和磁性,使其在生物医学领域具有潜在的应用。     

Colloidal gallium indium oxide nanocrystals: a multifunctional light-emitting phosphor broadly tunable by alloy composition

We demonstrate compositionally tunable photoluminescence in complex transparent conducting oxide nanocrystals. Alloyed gallium indium oxide (GIO) nanocrystals with variable crystal structures are prepared by a colloidal method throughout the full composition range and studied by different structural and spectroscopic methods, including photoluminescence and X-ray absorption. The structures and sizes of the GIO nanocrystals can be simultaneously controlled, owing to the difference in the growth kinetics of In(2)O(3) and Ga(2)O(3) nanocrystals and the polymorphic nature of both materials. Using the synthesized nanocrystal series, we demonstrate the structural and compositional dependences of the photoluminescence of GIO nanocrystals. These dependences, induced by the interactions between specific defect sites acting as electron donors and acceptors, are used to achieve broad emission tunability in the visible spectral range at room temperature. The nature of the photoluminescence is identified as donor-acceptor pair recombination and changes with increasing indium content owing to the changes in the energy states of, and interactions between, donors and acceptors. Structural analysis of GIO nanocrystals by extended X-ray absorption fine structure spectroscopy reveals that In(3+) occupies only octahedral, rather than tetrahedral, sites in the spinel-type γ-Ga(2)O(3) nanocrystal host lattice, until reaching the substitutional incorporation limit of ca. 25%. The emission decay dynamics is also strongly influenced by the nanocrystal structure and composition. The oxygen vacancy defects, responsible for the observed photoluminescence properties, are also implicated in other functional properties, particularly conductivity, enabling the application of colloidal GIO nanocrystals as integrated optoelectronic materials.     

Polyacrylic acid coating of highly luminescent CdS nanocrystals for biological labeling applications

Surface coating of highly luminescent CdS nanocrystals by polyacrylic acid was demonstrated. The method proceeded in 2 steps, (i) modification of the CdS surface by alkyl molecules and (ii) polyacrylic acid coating of the surface modified CdS. Attachment of alkyl ammonium on the CdS surface induced a phase transfer reaction from an aqueous to a non-polar phase with a yield of approximately 100%. Investigating alkyl molecules with various functional groups revealed that the alkyl molecules, possessing the cation moiety, such as amine or ammonium salt, can electrostatically interact with the CdS surface. The PL of the uncoated nanocrystals was almost entirely quenched in the pH range of approximately 7, while the polyacrylic acid coated nanocrystals exhibited moderate PL intensity. This PL intensity was preserved for at least several days, facilitating biological labeling application under a neutral condition.     

Surface-treatment of Alkaline Earth Sulfides Based Phosphor

A series of alkaline earth sulfides based phosphors Ca0.8Sr0.2S : Eu^2 , Tm^3 were covered with a layerof protective coating with alkaline earth fluorides by heating the mixture of phosphor and NH4HF2 at elevatedtemperatures. The coatings were characterized by means of XRD and SEM. The optical properties of thecoated phosphors and the influences of the coating on their properties have been discussed extensively. Thestabilities of the coated and uncoated phosphors have been compared.     

pH- and Dopant-Dependent CdMoO(4):Mn Nanocrystals: Luminescence and Magnetic Properties

CdMoO(4):Mn nanocrystals with a tetragonal crystal structure were prepared by aqueous coprecipitation method at a low temperature of 2 °C under different pH values. The size of the CdMoO(4):Mn nanocrystals of spherical morphology increases with the Mn dopant concentration from 35 to 55 nm for pH = 4. The morphology could be tuned from nanocrystals to microstructures consisting of smaller nanoparticles by the Mn concentration when the pH value of the precursor was increased to 8. The thermal stability of the luminescence and magnetic properties of the Mn-doped samples also depend on the pH and the doping level. The effects of the pH and dopant on the luminescence and magnetic properties, including magnetic susceptibility and electron paramagnetic resonance, were investigated. This approach contributes to better understanding of aqueous chemistry methods to control the growth of nanocrystals.     

Order and disorder effects in nano-ZrO(2) investigated by micro-Raman and spectrally and temporarily resolved photoluminescence

Pure and europium (Eu(3+)) doped ZrO(2) synthesized by an oil-in-water microemulsion reaction method were investigated by in situ and ex situ X-ray diffraction (XRD), ex situ Raman spectroscopy, high-resolution transmission electron microscopy (HRTEM), steady state and time-resolved photoluminescence (PL) spectroscopies. Based on the Raman spectra excited at three different wavelengths i.e. 488, 514 and 633 nm and measured in the spectral range of 150-4000 cm(-1) the correlation between the phonon spectra of ZrO(2) and luminescence of europium is clearly evidenced. The PL investigations span a variety of steady-state and time resolved measurements recorded either after direct excitation of the Eu(3+) f-f transitions or indirect excitation into UV charge-transfer bands. After annealing at 500 °C, the overall Eu(3+) emission is dominated by Eu(3+) located in tetragonal symmetry lattice sites with a crystal-field splitting of the (5)D(0)-(7)F(1) emission of 20 cm(-1). Annealing of ZrO(2) at 1000 °C leads to a superposition of Eu(3+) emissions from tetragonal and monoclinic lattice sites with monoclinic crystal-field splitting of 200 cm(-1) for the (5)D(0)-(7)F(1) transition. At all temperatures, a non-negligible amorphous/disordered content is also measured and determined to be of monoclinic nature. It was found that the evolutions with calcination temperature of the average PL lifetimes corresponding to europium emission in the tetragonal and monoclinic sites and the monoclinic phase content of the Eu(3+) doped ZrO(2) samples follow a similar trend. By use of specific excitation conditions, the distribution of europium on the amorphous/disordered surface or ordered/crystalline sites can be identified and related to the phase content of zirconia. The role of zirconia host as a sensitizer for the europium PL is also discussed in both tetragonal and monoclinic phases.     

Microstructure and optical properties of Ag-doped ZrO2 thin films prepared by sol gel method

Ag doped ZrO₂ thin films were deposited on quartz substrates by sol–gel dip coating technique. The effect of Ag doping on tetragonal to monoclinic phase transformation of ZrO₂ at a lower temperature (500 °C) was investigated by X-ray diffraction. It is found that the Ag doping promotes the phase transformation. The phase transformation can be attributed to the increase in the tetragonal grain size and concentration of oxygen vacancies in the presence of the Ag dopant. Accumulation of the Ag atoms at the film surface and surface morphology changes in the films were observed by AFM as a function of varying Ag concentration. X-ray photoelectron spectroscopy gave Ag 3d and O 1s spectra on Ag doped thin film. The chemical states of Ag have been identified as the monovalent state of Ag⁺ ions in ZrO₂. The Ag doped ZrO₂ thin films demonstrated the tailoring of band gap values. It is also found that the intensity of room temperature photoluminescence spectra is suppressed with Ag doping.     

Raman Spectrum of Er-Y-codoped ZrO2 and Fluorescence Properties of Er3+

Er-Y-codoped ZrO2 mixed oxides with monoclinic, tetragonal and cubic structures were prepared by a sol-gel method. The crystal structure of ZrO2 matrix and the effect of the ZrO2 phases on the fluorescence properties of Er3+ were studied using Raman spectroscopy. The results indicated that the fluorescence properties of Er3+ depend on its local ZrO2 crystal structures. As ZrO2 matrix transferred from monoclinic to tetragonal and cubic phase, the Raman and fluorescence bands of Er3+ decreased in intensities and tended to form a single peak. With 632.8 nm excitation, the bands between 640 and 680 nm were attributed to the fluorescence of Er3+ in the ZrO2 environment. However, only the fluorescence was observed and no Raman spectra were seen under 514.5 nm excitation, while only Raman spectra were observed under 325 nm excitation. UV Raman spectroscopy was found to be more sensitive in the surface region while the information provided by XRD mainly came from the bulk. The phase with lower symmetry forms more easily on the surface than in the bulk.     

棒状LaF3∶Eu3+纳米晶的制备与发光性能

采用一种简单的液相反应法在室温下合成了棒状的LaF3∶Eu3+纳米晶, 对其结构和发光性能进行了表征. XRD分析结果表明, 室温下即可得到结晶良好的六方晶相的LaF3, 灼烧之后样品的衍射峰增强, 没有杂相产生. TEM照片表明, 棒状LaF3∶Eu3+纳米材料的直径为8 nm左右, 长度达到50 nm. 荧光光谱表明, 室温下合成的棒状LaF3∶Eu3+纳米晶的最强发射峰位于589 nm, 对应于Eu3+的5D0-7F1跃迁发射, 说明Eu3+占据LaF3基质中La3+晶格点的C2对称格位上. 同时Eu3+的猝灭摩尔分数为5%, 荧光寿命随着灼烧温度的升高而延长.     

NaGdF4:Eu3+/AAO薄膜的制备与表征

采用水热法在多孔阳极氧化铝(AAO)模板上制备了NaGdF<,4>:Eu<'3+>(摩尔分数5.0%)/AAO薄膜,并研究了制备方法、溶液浓度和退火温度对薄膜样品形貌、结构和发光性质的影响.XRD结果表明,在低于500 ℃退火,得到具有NaGdF<,4>六方相结构的NaGdF<,4>:Eu<'3+>/AAO薄膜;而在5...     

Microwave-assisted aqueous synthesis: a rapid approach to prepare highly luminescent ZnSe(S) alloyed quantum dots

In this paper, we present a new procedure for the rapid synthesis of luminescent ZnSe nanocrystals in aqueous phase by microwave irradiation with controllable temperature. The effects of microwave irradiation and experimental conditions on the synthesis of nanocrystals were investigated systematically. It was found that there were significant effects of pH value of reaction solutions, molar ratio of precursors, and heating time of microwave irradiation on the optical properties of the ZnSe nanocrystals. A series of nanocrystals with different size was prepared in 1 h, and the photoluminescence quantum yield reached up to 17% at the optimal reaction condition. The results of HRTEM and XRD showed that the as-prepared nanocrystals had high crystallinity. The characterizations of EDS spectra and elemental analysis showed that the sulfur content of nanocrystals increased with the growth of nanocrystals. We speculated that the structure of nanocrystals was an alloy ZnSe(S) shell on the surface of the ZnSe particles core. Furthermore, we found that the oxygen from air in the reaction vessel played an important role in the decomposition of the thiol group under microwave irradiation.     

表面修饰ZrO2纳米微粒的结构表征及摩擦学行为研究

采用XPS,FTIR,DSC,TGA等多种现代分析手段表征了理解旨酸修饰ZrO2纳米微粒的结构,在四球磨摩擦员试验机上,首次评价了表面ZrO2纳米微粒用作润滑油添加剂的摩擦学性能,结果表明ZrO2纳米微粒具有良好的抗磨减摩性。     

功能化ZnxCd1-xS纳米晶的制备及其光学性能的研究

以氯化锌、氯化镉和硫化钠为原料，采用巯基乙醇为表面修饰剂，H₂O/DMF为溶剂，制得未团聚且分散均匀的纳米晶溶液，同时得到表面富含羟基基团不同锌镉组成的复合Zn_xCd_1-xS纳米晶。利用FTIR、EDS、UV-Vis、XRD、荧光光谱(PL)考察了复合纳米晶结构和光学性能的关系，并利用紫外灯摄像技术对Zn_xCd_1-xS纳米晶的光致发光性能进行