Assembly of lipophilic tetranuclear (Cu4 and Zn4) molecular metallophosphonates from 2,4,6-triisopropylphenylphosponic acid and pyrazole ligands

A sterically hindered aryl phosphonic acid ArP(O)(OH)2 (2) (Ar = 2,4,6-isopropylphenyl) was synthesized and structurally characterized. ArP(O)(OH)2 forms an interesting hydrogen-bonded corrugated sheet-type supramolecular structure in the solid-state. A three-component reaction involving ArP(O)(OH)2, 3,5-dimethylpyrazole(DMPZH), and Cu(CH3COO)2.H2O produces the tetranuclear Cu(II) compound [Cu4(mu3-OH)2{ArPO2(OH)}2(CH3CO2)2(DMPZH)4][CH3COO]2.CH2Cl2 (3). A similar three-component reaction involving ArP(O)(OH)2, 3,5-dimethylpyrazole, and Zn(CH3COO)2.2H2O yields the tetranuclear Zn(II) compound [Zn4{ArPO3}2{ArPO2(OH)}2{DMPZH}4(DMPZ)2].5MeOH (4). While 3 has been found to have an asymmetric cage structure where two dinuclear copper cores are bridged by bidentate [ArPO2(OH)]- ligands, 4 possesses an open-book tricyclic structure composed of three fused metallophosphonate rings. Magnetic studies on 3 revealed antiferromagnetic behavior.     

Synthesis and characterization of three homoleptic alkoxides of uranium: [Li(THF)]2[UIV(OtBu)6], [Li(Et2O)][UV(OtBu)6], and UVI(OtBu)6

Addition of 6 equiv of LiOtBu to a THF/Et2O solution of UCl4 at -25 degrees C generates [Li(THF)]2[U(OtBu)6] (1) in 61% yield. 1 is soluble in polar organic solvents and is stable for several days in THF. However, 1 slowly decomposes in benzene or hexanes, forming the dinuclear uranium(IV) species [Li(THF)][U2(OtBu)9] (2) as one of the decomposition products. Alternatively, 2 can be directly prepared in moderate yield by the addition of 4.5 equiv LiOtBu to UCl4 in hexanes/THF at room temperature. The decomposition of 1 has been studied by 1H and 7Li{1H} NMR spectroscopies to elucidate the nature of this transformation. Oxidation of 1 occurs readily in the presence of 0.5 or 1 equiv of I2 to give [Li(Et2O)][U(OtBu)6] (3) and U(OtBu)6 (4), respectively, in good yields. Alternately, 3 can be generated by comproportionation of 1 and 4. 1-4 have been fully characterized, including analysis by X-ray crystallography. In the solid-state these complexes possess large U-O-Cq bond angles, suggestive of a significant U-O pi interaction. In addition, we have studied the redox properties of 4 by cyclic voltammetry.     

Metathesis of P=C Bonds Catalyzed by N-Heterocyclic Carbenes

The catalytic metathesis of C=C bonds is a textbook reaction that has no parallel in the widely studied area of multiple bonds involving heavier p-block elements. A high-yielding P=C bond metathesis of phosphaalkenes (ArP=CPh₂, Ar=Mes, o-Tol, Ph) has been discovered that is catalyzed by N-heterocyclic carbenes (NHC=Me₂IMe, Me₂IⁱPr). The products are cyclic oligomers formally derived from ArP=PAr [i. e. cyclo-(ArP)_n; n=3, 4, 5, 6] and Ph₂C=CPh₂. Preliminary mechanistic studies of this remarkable transformation have established NHC=PAr (Ar=Mes, o-Tol, Ph) as key phosphinidene transfer agents. In addition, novel cyclic intermediates, such as, cyclo-(ArP)₂CPh₂ and cyclo-(ArP)₄CPh₂ have also been observed. This work represents a rare application of non-metal-based catalysts for transformations involving main-group elements.     

Oxo- and imidovanadium complexes incorporating methylene- and dimethyleneoxa-bridged calix[3]- and -[4]arenes: synthesis, structures and ethylene polymerisation catalysis

Reaction of [V(X)(OR)3] (X=O, Np-tolyl; R=Et, nPr or tBu) with p-tert-butylhexahomotrioxacalix[3]areneH3, LH3, affords the air-stable complexes [{V(X)L}n] (X=O, n=1 (1); X=Np-tolyl, n=2 (2)). Alternatively, 1 is readily available either from interaction of [V(mes)3THF] with LH3, and subsequent oxidation with O2 or upon reaction of LLi3 with [VOCl3]. Reaction of [V(Np-tolyl)(OtBu)3] with 1,3-dimethylether-p-tert-butylcalix[4]areneH2, Cax(OMe)2(OH)2, afforded [{VO(OtBu)}2(mu-O)Cax(OMe)2(O)2].2 MeCN (42 MeCN), in which two vanadium atoms are bound to just one calix[4]arene ligand; the n-propoxide analogue of 4, namely [{VO(OnPr)}2(mu-O)Cax(OMe)2(O)2].1.5 MeCN (51.5 MeCN), has also been isolated from a similar reaction using [V(O)(OnPr)3]. Reaction of [VOCl3], LiOtBu, (Me3Si)2O and Cax(OMe)2(OH)2 gave [{VO(OtBu)Cax(OMe)2(O)2}2Li4O2].8 MeCN (68 MeCN), in which an Li4O4 cube (two of the oxygen atoms are derived from the calixarene ligands) is sandwiched between two Cax(OMe)2(O)2. The reaction between [V(Np-tolyl)(OtBu)3] and Cax(OMe)2(OH)2, afforded [V(Np-tolyl)(OtBu)2Cax(OMe)2(O)(OH)]5 MeCN (75 MeCN), in which two tert-butoxide groups remain bound to the tetrahedral vanadium atom, which itself is bound to the calix[4]arene through only one phenolic oxygen atom. Reaction of p-tert-butylcalix[4]areneH4, Cax(OH)4 and [V(Np-tolyl)(OnPr)3] led to loss of the imido group and formation of the dimeric complex [{VCax(O)4(NCMe)}2].6 MeCN (86 MeCN). Monomeric vanadyl oxo- and imidocalix[4]arene complexes [V(X)Cax(O)3(OMe)(NCMe)] (X=O (11), Np-tolyl (12)) were obtained by the reaction of the methylether-p-tert-butylcalix[4]areneH3, Cax(OMe)(OH)3, and [V(X)(OR)3] (R=Et or nPr). Vanadyl calix[4]arene fragments can be linked by the reaction of 2,6-bis(bromomethyl)pyridine with Cax(OH)4 and subsequent treatment with [VOCl3] to afford the complex [{VOCax(O)4}2(mu-2,6-(CH2)2C5H3N)].4 MeCN (134 MeCN). The compounds 1-13 have been structurally characterised by single-crystal X-ray diffraction. Upon activation with methylaluminoxane, these complexes displayed poor activities, however, the use of dimethylaluminium chloride and the reactivator ethyltrichloroacetate generates highly active, thermally stable catalysts for the conversion of ethylene to, at 25 degrees C, ultra-high-molecular-weight (>5, 500,000), linear polyethylene, whilst at higher temperature (80 degrees C), the molecular weight of the polyethylene drops to about 450,000. Using 1 and 2 at 25 degrees C for ethylene/propylene co-polymerisation (50:50 feed) leads to ultra-high-molecular-weight (>2,900,000) polymer with about 14.5 mol% propylene incorporation. The catalytic systems employing the methyleneoxa-bridged complexes 1 and 2 are an order of magnitude more active than the bimetallic complexes 5 and 13, which, in turn, are an order of magnitude more active than pro-catalysts 8, 11 and 12. These differences in activity are discussed in terms of the structures of each class of complex.     

Synthesis and characterization of [(diene)Rh[mu-OSi(OtBu)3]]2, a precursor to silica-bound rhodium

Reaction of [(diene)RhCl]2 with 2 equiv of KOSi(OtBu)3 afforded [(diene)Rh[mu-OSi(OtBu)3]]2, where diene=cod (1) and nbd (2). Multinuclear NMR studies reveal that 1 and 2 have a dimeric structure with bridging tris(tert-butoxy)siloxy ligands. These dimers are folded along the O...O axis. Complexes and reacted with PR3(R=Me, Ph) to give monomeric products, the formulae of which depend on the amount of PR3 added ((diene)Rh[OSi(OtBu)3](PR3) and Rh[OSi(OtBu)3](PMe3)3). The behavior of 1 towards water and methanol is discussed. Thermogravimetric analyses (TGAs) of 1 and 2 reveal rather sharp conversions to rhodium-containing materials. Thermolysis of 1 in toluene at 180 degrees C resulted in formation of a black precipitate, which contained rhodium nanoparticles with an average diameter of 22 nm, as determined by powder X-ray diffraction (PXRD), after calcination at 300 degrees C for 1 h.     

Surface organobarium and organomagnesium chemistry on periodic mesoporous silica MCM-41: convergent and sequential approaches traced by molecular models

The alkaline earth metal alkyl complexes [Ba(AlEt(4))(2)](n) and Mg(AlMe(4))(2) were directly grafted onto periodic mesoporous silica MCM-41, which had been dehydroxylated at 270 °C (specific surface area a(s): 1023 m(2) g(-1); pore volume V(p): 1.08 cm(3) g(-1); main pore diameter 3.4 nm). Alternatively, barium alkyl surface species were generated by sequential grafting of MCM-41 with Ba[N(SiHMe(2))(2)](2)(thf)(4) and AlEt(3) to yield the hybrid material AlEt(3)@Ba[N(SiHMe(2))(2)](2)(thf)(4)@MCM-41. For a better understanding of the surface chemistry, AlEt(3)@MCM-41 was also accessed. All hybrid materials were analyzed by diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy, elemental analysis, nitrogen physisorption, and solid-state NMR spectroscopy; this clearly revealed distinct surface chemistry for the alkylaluminate-treated materials [Ba(AlEt(4))(2)]@MCM-41 and Mg(AlMe(4))(2)@MCM-41. In an attempt to mimic the surface chemistry, the organometallic precursors were treated with HOSi(OtBu)(3). The reaction of equimolar amounts of {Ba[N(SiHMe(2))(2)](2)}(n) and HOSi(OtBu)(3) produced a mixed silylamido/siloxide cluster of Ba(3)[OSi(OtBu)(3)](3)[N(SiHMe(2))(2)](3) with bridging-only siloxide ligands as well as one bridging and two terminal silylamido ligands. The Schlenk equilibrium was found to govern the [Ba(AlEt(4))(2)](n)-HOSi(OtBu)(3) and Mg(AlMe(4))(2)-HOSi(OtBu)(3) reactions, leading to the isolation of complexes of [Ba(AlEt(4))(2) (toluene)](2) and Mg[OSi(OtBu)(3))](2)(AlMe(3))(2), respectively. Allowing for a donor-induced cleavage of Mg(AlMe(4))(2), the reaction of [MgMe(2)] with one or two equivalents of HOSi(OtBu)(3) was studied. While putative Mg[OSi(OtBu)(3)](Me) and Mg[OSi(OtBu)(3)](2) could not be crystallized from the reaction mixtures, cluster complexes Mg(5)(O)[OSi(OtBu)(3)](5)Me(3) and Mg(4)(OH)(2)[OSi(OtBu)(3)](6) could be unambiguously identified by X-ray crystallography.     

Oxygen capture by lithiated organozinc reagents containing aromatic 2-pyridylamide ligands

The sequential reaction of ZnMe2 with a 2-pyridylamine (HN(2-C5H4N)R, R = Ph: 1; 3,5-Xy (=3,5-xylyl): 2; 2,6-Xy: 3; Bz (=benzyl): 4; Me: 5), tBuLi and thereafter with oxygen affords various lithium zincate species, the solid-state structures of which reveal a diversity of oxo-capture modes. Amine 1 reacts to give both dimeric THF [Li(Me)OZn[N(2-C5H4N)Ph]2] (6), wherein oxygen has inserted into the Zn-C bond of a [MeZn[N(2-C5H4N)-Ph]2] ion, and the trigonal Li2Zn complex, bis(OtBu)-capped (THF x Li)2-[[(mu3-O)tBu]2Zn[N(2-C5H4N)Ph]2] (7). The structural analogue of 6 (8) results from the employment of 2, while the use of more sterically congested 3 yields a pseudo-cubane dimer [(THF x [Li(tBu)OZn(OtBu)Me]]2] (9) notable for the retention of labile Zn-C(Me). Amines 4 and 5 afford the oxo-encapsulation products [mu4-O)Zn4[(2-C5H4N)-NBz]6] (10b), and [tBu(mu3-O)-Li3(mu6-O)Zn3[(2-C5H4N)NMe]6] (11), respectively, with concomitant oxo-insertion into a Li-C interaction resulting in capping of the fac-isomeric (mu6-O)M3M'3 distorted octahedral core of the latter complex by a tert-butoxide group.     

Dramatic enhancement of the alkene metathesis activity of Mo imido alkylidene complexes upon replacement of one tBuO by a surface siloxy ligand

[(triple bond SiO)Mo(triple bond NAr)(=CHCMe2R)(OtBu)], a well-defined silica supported alkene metathesis catalyst precursor, shows a dramatic enhancement of activity and selectivity compared to [Mo(triple bond NAr)(=CHCMe2R)(OtBu)2] and [(triple bond SiO)Mo(triple bond NAr)(=CHCMe2R)(CH2tBu)], respectively.     

Atomic level control over surface species via a molecular precursor approach: isolated Cu(I) sites and Cu nanoparticles supported on mesoporous silica

A nonaqueous molecular precursor grafting approach was employed for the generation of well-defined surface structures featuring Cu on a mesoporous silica support. X-ray absorption measurements (XANES and EXAFS) were used to determine that [CuOSi(OtBu)3]4 provided 100% isolated Cu(I) sites upon grafting (without thermal treatment), whereas [CuOtBu]4 gave isolated species with most of the original Cu-O-Cu linkages intact, but in a more relaxed straight chain form. Upon heating under inert conditions, the vast majority of Cu in the materials from [CuOSi(OtBu)3]4 remained as isolated Cu(I) sites (up to 88% isolation), with significant stabilization provided from the -OSi(OtBu)3 ligands. In stark contrast, approximately 100% of the Cu in the materials generated from [CuOtBu]4 was readily reduced upon heating, forming isolated Cu metal particles with an average diameter of 0.7 nm.     

Cycloaddition of phosphanylidene-sigma4-phosphoranes ArP=PMe3 and quinones to yield 1,3,2-dioxophospholanes

The reaction of phosphanylidene-[sigma](4)-phosphoranes ArP=PMe(3)(Ar = 2,6-Mes(2)C(6)H(3) or 2,4,6-t-Bu(3)C(6)H(2)) with select ortho-quinones yields 1,3,2-dioxophospholanes, one of which shows interesting [small pi]-stacking of the aromatic groups in the solid state.     

Electrochemical Reduction of Phosphaallenes: Electron Spin Resonance and Theoretical Studies

Abstract

In order to check to what extent allenic systems containing one or two phosphorus atoms are likely to accept an electron, solutions of ArP?C?Cφ₂ (Ar Phenyltributyl; φ benzene) and ArP?C?PAr have been electrochemically and chemically reduced. Cyclic voltammetry shows that ArP?C?Cφ₂ undergoes irreversible reduction at -2266mV in THF while an irreversible reduction takes place at - 1900 mV (THF) for ArP?C?PAr.     

Special Properties Imparted to the 9-Phosphabicyclo[6.1.0]nonatriene system by a P-(2,4,6-tri-t-butylphenyl) substituent; 17O NMR spectrum of a bicyclic phosphirane oxide

9-(2,4,6-Tri-t-butylphenyl)-9-phosphabicyclo[6.1.0]nona-2,4,6-triene gave an observable P-oxide with t-butyl hydroperoxide. Decomposition occurred by expulsion of the phosphorus fragment, possibly as ArPO, rather than by the expected ring expansion to a phosphonin oxide. The 17O NMR shift of 18.0 is the most upfield known for a phosphine oxide.     

Alkyne and alkene complexes of a d(0) zirconocene aryl cation

The generation and properties of nonchelated Zr-aryl-alkyne and Zr-aryl-alkene complexes that are stabilized by the presence of beta-Si-substituents in the alkyne and alkene ligands and fluorination of the aryl ligand are described. Reaction of [Cp'2Zr(OtBu)(ClCD2Cl)][B(C6F5)4] (1, Cp' = C5H4Me) with alkyne and alkene substrates (L) generates Cp'2Zr(OtBu)(L)+ adducts (L = HCCCH2SiMe3 (2); H2C=CHCH2SiMe3 (3); HCCMe (4); H2C=CHCH2CMe3 (5)). Equilibrium constants for substrate binding (Keq = [Zr-L][1]-1[L]-1; CD2Cl2, -89 degrees C) are much larger for the beta-Si-substituted compounds 2 (1.0(2) x 105 M-1) and 3 (1.7(4) x 103 M-1) than for hydrocarbon analogues 4 (3.6(7) x 102 M-1) and 5 (1.9(1) M-1), which is ascribed to beta-Si stabilization of the partial positive charge on Cint of the bound substrate. [Cp2Zr(C6F5)][B(C6F5)4] (7, Cp = C5H5) was generated by the reaction of Cp2Zr(C6F5)Me with [Ph3C][B(C6F5)4] in C6D5Cl. Reaction of 7 with alkyne and alkene substrates (L) generates Cp2Zr(C6F5)(L)+ adducts (L = HCCCH2SiMe3 (8); H2C=CHCH2SiMe3 (10)). No insertion of the substrate into the Zr-C6F5 bond is observed in 8 (at -38 degrees C) or 10 (up to 22 degrees C). The allyltrimethylsilane ligand in 10 undergoes nondissociative alkene face exchange ("alkene flipping", i.e., exchange of the Cp2Zr(C6F5)+ unit between the two alkene enantiofaces without alkene dissociation), with a first-order rate constant kflip = 23(1) s-1 (C6D5Cl, -38 degrees C). 10 also undergoes slower reversible decomplexation of the alkene (kdissoc = 5.0(8) s-1; C6D5Cl, -38 degrees C).     

Homoleptic rare-earth metal(III) tetramethylaluminates: structural chemistry, reactivity, and performance in isoprene polymerization

The complexes [Ln(AlMe4)3] (Ln=Y, La, Ce, Pr, Nd, Sm, Ho, Lu) have been synthesized by an amide elimination route and the structures of [Lu{(micro-Me)2AlMe2}3], [Sm{(micro-Me)2AlMe2}3], [Pr{(micro-Me)2AlMe2}3], and [La{(micro-Me)2AlMe2}2{(micro-Me)3AlMe}] determined by X-ray crystallography. These structures reveal a distinct Ln3+ cation size-dependency. A comprehensive insight into the intrinsic properties and solution coordination phenomena of [Ln(AlMe4)3] complexes has been gained from extended dynamic 1H and 13C NMR spectroscopic studies, as well as 1D 89Y, 2D 1H/89Y, and 27Al NMR spectroscopic investigations. [Ce(AlMe4)3] and [Pr(AlMe4)3] have been used as alkyl precursors for the synthesis of heterobimetallic alkylated rare-earth metal complexes. Both carboxylate and siloxide ligands can be introduced by methane elimination reactions that give the heterobimetallic complexes [Ln{(O2CAriPr)2(micro-AlMe2)}2(AlMe4)(C6H14)n] and [Ln{OSi(OtBu)3}(AlMe3)(AlMe4)2], respectively. [Pr{OSi(OtBu)3}(AlMe3)(AlMe4)2] has been characterized by X-ray structure analysis. All of the cerium and praseodymium complexes are used as precatalysts in the stereospecific polymerization of isoprene (1-3 equivalents of Et2AlCl as co-catalyst) and compared to the corresponding neodymium-based initiators reported previously. The superior catalytic performance of the homoleptic complexes leads to quantitative yields of high-cis-1,4-polyisoprene (>98%) in almost all of the polymerization experiments. In the case of the binary catalyst mixtures derived from carboxylate or siloxide precatalysts quantitative formation of polyisoprene is only observed for nLn:nCl=1:2. The influence of the metal size is illustrated for the heterobimetallic lanthanum, cerium, praseodymium, neodymium, and gadolinium carboxylate complexes, and the highest activities are observed for praseodymium as a metal center in the presence of one equivalent of Et2AlCl.     

catena‐Poly[[[μ‐1,3‐bis(diphenylphosphanyl)propane‐κ2P:P′][O‐ethyl (4‐methoxyphenyl)phosphonodithioato‐κ2S,S′]silver(I)] chloroform monosolvate]

Reaction of a mixture of AgOAc, Lawesson's reagent [2,4‐bis(4‐methoxyphenyl)‐1,3‐dithiadiphosphetane‐2,4‐disulfide] and 1,3‐bis(diphenylphosphanyl)propane (dppp) under ultrasonic treatment gave the title compound, {[Ag(C₉H₁₂O₂PS₂)(C₂₇H₂₆P₂)]·CHCl₃}_n, a novel one‐dimensional chain based on the in situ‐generated bipodal ligand [ArP(OEt)S₂]⁻ (Ar = 4‐methoxyphenyl). The compound consists of bidentate bridging 1,3‐bis(diphenylphosphanyl)propane (dppp) and in situ‐generated bidentate chelating [ArP(OEt)S₂]⁻ ligands. The dppp ligand links the [Ag{ArP(OEt)S₂}] subunit to form an achiral one‐dimensional infinite chain. These achiral chains are packed into chiral crystals by virtue of van der Waals interactions. No π–π interactions are observed in the crystal structure.     

Molecular gallosilicates and their group 4 multimetallic derivatives

Reaction between the silanediol (HO)(2)Si(OtBu)(2) and gallium amides, LGaCl(NHtBu) and LGa(NHEt)(2) (L = [HC{C(Me)N(Ar)}(2)](-), Ar = 2,6-iPr(2)C(6)H(3)), respectively, resulted in the facile isolation of molecular gallosilicates LGaCl(μ-O)Si(OH)(OtBu)(2) (1) and LGa(NHEt)(μ-O)Si(OH)(OtBu)(2) (2). Compound 2 easily reacts with 1 equiv of water to form the unique gallosilicate-hydroxide LGa(OH·THF)(μ-O)Si(OH)(OtBu)(2) (3). Compounds 1-3 contain the simple Ga-O-SiO(3) framework and are the first structurally authenticated molecular gallosilicates. These compounds may be used not only as models for gallosilicate-based materials but also as further reagents because of the presence of reactive functional groups attached to both gallium and silicon atoms. Accordingly, seven molecular heterometallic compounds were obtained from the reactions between compound 3 and group 4 amides M(NMe(2))(4) (M = Ti, Zr) or M(NEt(2))(4) (M = Ti, Zr, Hf). Hence, by tuning the reactions conditions and stoichiometries, it was possible to isolate and structurally characterize the complete 1:1 and 2:1 series (4-10). Completely inorganic cores of types M-O-Ga-O-Si-O and spiro M[O-Ga-O-Si-O](2) were obtained and characterized by common spectroscopic techniques.     

DFT modeling of silver disorder and mobility in the semiconductor cluster [Ag28S26(P(O)PhOMe)12(PPh3)12

Disorder of silver atoms and high cation mobility are commonly observed and closely coupled features in silver chalcogenides. The ligand-stabilized cluster [Ag28(micro6-S)2{ArP(O)S2}12(PPh3)12] (1) (Ar=4-anisyl), with a total of 666 atoms, displays in its X-ray structure highly localized disorder at two core silver atoms. To explore the nature of this disorder, we have applied density functional methods to its internal structure and flexibility. The pseudo-S6 symmetry of the cluster provides six equivalent pockets to place the pair of silver atoms, and with the exception of populating neighboring sites, all permutations relax to structures with similar cores. The barrier to concerted motion of the central silver atoms from one set of pockets to the next of the Ci-symmetric conformer is estimated to be less than about 26 kJ mol(-1). Cluster 1 can be considered a model for bulk phase cation mobility.     

New dinuclear nickel(II) complexes: synthesis, structure, electrochemical, and magnetic properties

The reaction of [NiBr(2)(bpy)(2)] (bpy = 2,2'-bipyridine) with organic phosphinic acids ArP(O)(OH)H [Ar = Ph, 2,4,6-trimethylphenyl (Mes), 9-anthryl (Ant)] leads to the formation of binuclear nickel(II) complexes with bridging ArP(H)O(2)(-) ligands. Crystal structures of the binuclear complexes [Ni(2)(μ-O(2)P(H)Ar)(2)(bpy)(4)]Br(2) (Ar = Ph, Mes, Ant) have been determined. In each structure, the metal ions have distorted octahedral coordination and are doubly bridged by two arylphosphinato ligands. Magnetic susceptibility measurements have shown that these complexes display strong antiferromagnetic coupling between the two nickel atoms at low temperatures, apparently similar to binuclear nickel(II) complexes with bridging carboxylato ligands. Cyclic voltammetry and in situ EPR spectroelectrochemistry show that these complexes can be electrochemically reduced and oxidized with the formation of Ni(I),Ni(0)/Ni(III) derivatives.     

Different modes of hydrogen migration in reactions of diphosphaallene,ArPCPAr (Ar = 2,4,6-But3C6H2) with [W(CO)5(THF)] and [Fe3(CO)12]. Crystal and molecular structure of [Fe2(CO)6(ArPCHPCH2(CMe2)C6H2But2)]

Rearrangement of ArPCPAr (Ar = 2,4,6-Bu^t₃C₆H₂) involving hydrogen migration from carbon to phosphorus occurs on heating with [W(CO)₅(THF)], but with [Fe₃(CO)₁₂] an unusual carbon to carbon hydrogen migration results.     

Synthesis and SAR study of novel peptide aldehydes as inhibitors of 20S proteasome

Based on the analysis of the crystal structure of MG101 (1) and 20S proteasomes, a new series of peptide aldehyde derivatives were designed and synthesized. Their ability to inhibit 20S proteasome was assayed. Among them, Cbz-Glu(OtBu)-Phe-Leucinal (3c), Cbz-Glu(OtBu)-Leu-Leucinal (3d), and Boc-Ser(OBzl)-Leu-Leucinal (3o) exhibited the most activity, which represented an order of magnitude enhancement compared with MG132 (2). The covalent docking protocol was used to explore the binding mode. The structure-activity relationship of the peptide aldehyde inhibitors is discussed.