Preferential Solvation in Mixed Solvents

The Kirkwood–Buff integrals and the volume-corrected preferential solvation parameters for the first solvation shell of binary mixtures of tetrahydrofuran with many organic solvents, calculated from reported thermodynamic data at the temperatures for which these data were available, are reported. The co-solvents include c-hexane, methyl-c-hexane, n-heptane, i-octane, benzene, toluene, ethylbenzene, 1-chlorobutane, dichloromethane, 1,2-dichloroethane, chloroform, 1,1,1-trichloroethane, tetrachlorom-ethane, tetrachloroethene, hexafluoro benzene, ethanol, 1-propanol, 2-propanol, dibutyl ether, acetic acid, acetone, dimethyl sulfoxide, tetramethylene sulfone (sulfolane), acetonitrile, pyrrolidine, and triethylamine. The preferential solvation parameters of these mixtures are discussed in terms of the interactions that occur.     

电子自旋共振作为探针研究卤代溶剂的专属性效应

4-羟基-2,2,6,6-四甲基哌啶-1-氧自由基(4-OH-TEMPO)电子自旋共振的超精细耦合常数AN与溶剂极性的微观反应常数ET(30)和溶剂受体数AN呈现线性正相关. 并且在介电常数或偶极矩接近时, 含卤溶剂中超精细耦合常数AN普遍偏高. 除了一般的溶剂效应外, 在含卤溶剂中超精细耦合常数AN偏大的原因与专属性的卤键作用有关. 理论计算结果辅助印证了这一结论.     

Study of Microheterogeneity in Acetonitrile–Water Binary Mixtures by using Polarity‐Resolved Solvation Dynamics

The solvation dynamics of three coumarin dyes with widely varying polarities were studied in acetonitrile–water (ACN–H₂O) mixtures across the entire composition range. At low ACN concentrations [ACN mole fractions (X_ACN)≤0.1], the solvation dynamics are fast (<40 ps), indicating a nearly homogeneous environment. This fast region is followed by a sudden retardation of the average solvation time (230–1120 ps) at higher ACN concentrations (X_ACN≈0.2), thus indicating the onset of nonideality within the mixture that continues until X_ACN≈0.8. This nonideality regime (X_ACN≈0.2–0.8) comprises of multiple dye‐dependent anomalous regions. At very high ACN concentrations (X_ACN≈0.8–1), the ACN–H₂O mixtures regain homogeneity, with faster solvation times. The source of the inherent nonideality of the ACN–H₂O mixtures is a subject of debate. However, a careful examination of the widths of time‐resolved emission spectra shows that the origin of the slow dynamics may be due to the diffusion of polar solvent molecules into the first solvation shell of the excited coumarin dipole.     

Preferential Solvation in Aqueous–Organic Mixed Solvents Using Solvatochromic Indicators

Solvatochromism of the twisted intramolecular charge-transfer (TICT) fluorescence of 4-(N,N-dimethylamino)benzonitrile (DMABN) in pure water, methanol, ethanol, 1-propanol, 2-propanol, acetone, acetonitrile, and in the corresponding aqueous–organic binary mixed solvents was systematically studied and an empirical solvent polarity scale (F _B) based on the DMABN solvatochromism was defined. The F _B parameters of the explored binary mixed solvents as a function of solvent composition were analyzed by a stepwise solvent-exchange (SSE) model to clarify the preferential solvation (PS) of the probe dye in these binary mixed solvents. Solvation diagrams toward DMABN in the mixed solvents, i.e., the local solvent composition in the solvation shell of DMABN molecules was depicted as a function of bulk solvent composition to visualize the PS in these mixed solvents. For comparison, a similar PS analysis was applied to the solvatochromism of 2,6-diphenyl-4-(2,4,6-triphenylpyridinium-1- yl)phenolate (ET-30) and pyrene (Py) in these mixed solvents; the responsive PS pattern of the mixed solvents toward the specific indicator dye of DMABN, ET-30, and Py was then discussed in terms of the chemical properties of the probe dye, the properties of the mixed solvents, and the solute–solvent and solvent–solvent interactions.     

Solvation model in the allylation of 2-mercaptobenzothiazole

The kinetics of the reaction of allyl bromide with 2-mercaptobenzothiazole has been studied in different protic and aprotic solvents conductometrically. The rate data were correlated with solvation parameters using linear multiple regression analysis. From the regression coefficients, which describe the susceptibility towards rate of different solvent parameters, information regarding solvent interactions is obtained and solvation models are proposed. The reaction has also been studied at different temperatures and thermodynamic parameters ∆H^≠, ∆S^≠, ∆G^≠ are computed.     

Hyperfine Coupling Constants of β‐Phosphorylated Nitroxides: A Tool to Probe the Cybotactic Effect by Electron Paramagnetic Resonance

Nitrogen hyperfine coupling constants (hcc) a_N of nitroxides measured by electron paramagnetic resonance are used to probe the cybotactic effect of solvents. A few articles (Janzen et al., Can. J. Chem. in 1982 for a_Hβ and Deng et al., J. Fluorine Chem. in 2002 , both for a_Hβ and a_Fβ) dealt with the cybotactic effect on the hcc of atoms (hydrogen H, fluorine F, and phosphorus P) in β positions of nitroxides. They show either no significant change or an increase in a_β with a_N. However, an early report by Il′Yasov et al. (Theor. Exp. Chem. 1976 , 656) described a dramatic change in a_Pβ with the solvent and an anti‐correlation of a_Pβ with a_N. We decided to reinvestigate that work using the N‐(2‐methylpropyl)‐N‐(1‐diethylphosphono‐2,2‐dimethylpropyl)‐N‐oxyl radical that carries both hydrogen and phosphorus atoms on the same carbon attached to the nitroxy moiety and that is highly persistent, in contrast to the nitroxide used by Il′Yasov. We observe the same trends as those observed by Il′Yasov, except that the solvent cybotactic effect on a_N and a_Pβ is dramatically weaker in our case. We showed that a_Pβ is correlated to both the cohesive pressure c and the normalized Reichardt polar constant E_T^N, and that hydrogen‐bonding donor solvents exhibit a specific behavior.     

Molecular Dynamics Simulation of Aqueous Solutions Using Interaction Energy Components: Application to the Solvation Gibbs Energy

Molecular dynamics simulations of aqueous solutions of the solutes acetamide (AcNH₂), acetic acid (AcOH), and acetaldehyde (AcH) were made using Lennard–Jones 12-6-1 potentials to describe the solute–solvent interactions. The Morokuma decomposition scheme and the ESIE solute atomic charges were used to reproduce the exchange, polarization, and electrostatic components of the solute–water interaction energy. A nonlinear perturbation was incorporated into the “slow-growth” technique in order to improve the results for the solvation Gibbs energy that were found to be in agreement with the available experimental and theoretical values.     

三氟甲基叔丁基氮氧自由基的超精细偶合常数与溶剂极性参数的相关性研究

用EPR方法测定了三氟甲基叔丁基氮氧自由基在16种溶剂中的顺磁参数α_N和α_F^β值.并对α_N值与溶剂的极性参数E_T、z进行了线性相关分析,讨论了这类低位阻含氟自旋探针对研究溶剂化和探针本身结构的作用.     

Study on Preferential Solvation of Water by Electrochemical Method

The preferential solvation of water plays an important role in ferrocene research which is a subject of current interest. Voltammetric investigations were carried out for Au electrode in acetonitrile/water, showing preferential solvation of water. In our work, the preferential solvation of water in acetonitrile/water was studied by electrochemical methods including cyclic volitammetry, electrochemical impedance spectra and double‐step chronoamperometry. Ferrocenemethanol (FcCH₂OH) molecules as a solute spontaneously adsorb on the electrode surface in anhydrous acetonitrile, resulting from acetonitrile molecules tend to form an acetonitrile solvent layer on the surface of the electrode and acetonitrile solvent layer has a lower energy barrier than the aqueous solvent layer, which has been obtained by modeling solvation. The solvent strongly influences electrochemical behavior of solute. Once there is an amount of water in acetonitrile solvent, FcCH₂OH that adsorbed on the electrode surface desorb. This is because water preferentially solvate with FcCH₂OH in term of intermolecular forces between solvent and solute. Moreover, hydrogen bond between water molecules and FcCH₂OH molecules is stronger than dipole‐dipole interaction between acetonitrile molecules and FcCH₂OH molecules in solvation effect. Through electrochemical behavior of FcCH₂OH changing, preferential solvation of water is analyzed by electrochemical methods.     

Solvation of 4-nitropyrazoles according to UV spectroscopy data

The dependence of the energies of intramolecular charge-transfer electron transitions in 1,3,5-trimethyl-4-nitropyrazole, 4-nitropyrazole, and its anion on the dielectric and acidbase properties of solvents was analyzed. The dipole moments of these species in the excited state are larger than those in the ground state. The nonspecific solvation is accomplished through dipole-dipole interactions. 4-Nitropyrazole, which possesses acidic properties, is also solvated by the mechanism of hydrogen bonding with the solvent, which acts as a base. The strength of the hydrogen bond increases on going from the ground to the electron-excited state. The 4-nitropyrazole anion is a base, and its hydrogen bonds with the solvent are stronger in the ground state. The mechanism of specific solvation of the molecule and the anion of 4-nitropyrazole during electronic excitation is discussed. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 867–869, April, 1997.     

Parameterization of the Hamiltonian Dielectric Solvent (HADES) Reaction‐Field Method for the Solvation Free Energies of Amino Acid Side‐Chain Analogs

Optimization of the Hamiltonian dielectric solvent (HADES) method for biomolecular simulations in a dielectric continuum is presented with the goal of calculating accurate absolute solvation free energies while retaining the model’s accuracy in predicting conformational free‐energy differences. The solvation free energies of neutral and polar amino acid side‐chain analogs calculated by using HADES, which may optionally include nonpolar contributions, were optimized against experimental data to reach a chemical accuracy of about 0.5 kcal mol^?1. The new parameters were evaluated for charged side‐chain analogs. The HADES results were compared with explicit‐solvent, generalized Born, Poisson–Boltzmann, and QM‐based methods. The potentials of mean force (PMFs) between pairs of side‐chain analogs obtained by using HADES and explicit‐solvent simulations were used to evaluate the effects of the improved parameters optimized for solvation free energies on intermolecular potentials.     

Highly Stable Lithium Metal Batteries Enabled by Regulating the Solvation of Lithium Ions in Nonaqueous Electrolytes

Safe and rechargeable lithium metal batteries have been difficult to achieve because of the formation of lithium dendrites. Herein an emerging electrolyte based on a simple solvation strategy is proposed for highly stable lithium metal anodes in both coin and pouch cells. Fluoroethylene carbonate (FEC) and lithium nitrate (LiNO₃) were concurrently introduced into an electrolyte, thus altering the solvation sheath of lithium ions, and forming a uniform solid electrolyte interphase (SEI), with an abundance of LiF and LiN_xO_y on a working lithium metal anode with dendrite‐free lithium deposition. Ultrahigh Coulombic efficiency (99.96 %) and long lifespans (1000 cycles) were achieved when the FEC/LiNO₃ electrolyte was applied in working batteries. The solvation chemistry of electrolyte was further explored by molecular dynamics simulations and first‐principles calculations. This work provides insight into understanding the critical role of the solvation of lithium ions in forming the SEI and delivering an effective route to optimize electrolytes for safe lithium metal batteries.     

Solvation effect on the vertical ionization energy of adenine-thymine base pair: From microhydration to bulk

In the present work, we investigate the effect of aqueous environment on the vertical ionization potential (VIP) of adenine-thymine (AT) base pair using a multilayer equation of the motion-coupled cluster method. The microsolvation can cause both blue-shift and red-shit of the IP values. However, the bulk water environment always results in the red-shift of the vertical ionization potential. Our study shows that the correct treatment of the short-range interaction plays an essential role in determining the magnitude of the red-shift. We have developed a biased sampling scheme based on Koopmans' energy, which can significantly speed up the convergence with respect to the number of solvent-solute configurations.     

Study of the Effect of Mobile Phase Additives on Retention in Reversed Phase HPLC Using Linear Solvation Energy Relationships

Linear solvation energy relationships (LSERs) were used to delineate which specific intermolecular interactions are responsible for changes in retention for a variety of well characterized analytes when acidic and basic additives were used in reversed phase HPLC. The effects of trifluoroacetic acid, triethylamine and a combination of trifluoroacetic acid and triethylamine on the LSERs were compared to those observed in the absence of additives. These effects were examined using four different mobile phase modifiers and five different stationary phases. Trifluoroacetic acid alone and in combination with triethylamine produced LSER regression coefficients nearly identical to those obtained with no additive present in the mobile phase. Triethylamine alone produced different LSER regression coefficients from the other systems unless the mobile phase contained trifluoroethanol as the mobile phase modifier, or the stationary phase consisted of a polymeric support.     

Solvation Effect of Li+ on the Voltammetric Properties of [PMo12O40]3−. Part 2: Comparative Studies on the Preferential Solvation in Acetonitrile+S and Acetone+S Mixtures

For [PMo₁₂O₄₀]^3?, the presence of Li⁺ produced a two‐electron wave at nearly the same potential as the first one‐electron wave in acetonitrile or acetone. The voltammetric behavior of [PMo₁₂O₄₀]^3? in a binary mixture of acetonitrile and solvent S was compared with those in a mixture of acetone and S. When the donor number (DN) of S>20, the first two‐electron wave was converted into one‐electron waves in such binary mixtures. The conversion occurred at lower mole fractions of S in an acetonitrile+S mixture than in an acetone+S mixture. The ⁷Li NMR results showed that the preferential solvating ability of Li⁺ with S was greater in the former mixture. A linear relationship was found between the iso‐solvation point x_iso(S) and the reciprocal of the difference between the DNs of S and acetonitrile, which gave the basis to explain the anomalies observed for a mixture of acetonitrile and H₂O.     

The impact of surface area,volume, curvature,and Lennard–Jones potential to solvation modeling

This article explores the impact of surface area, volume, curvature, and Lennard–Jones (LJ) potential on solvation free energy predictions. Rigidity surfaces are utilized to generate robust analytical expressions for maximum, minimum, mean, and Gaussian curvatures of solvent–solute interfaces, and define a generalized Poisson–Boltzmann (GPB) equation with a smooth dielectric profile. Extensive correlation analysis is performed to examine the linear dependence of surface area, surface enclosed volume, maximum curvature, minimum curvature, mean curvature, and Gaussian curvature for solvation modeling. It is found that surface area and surfaces enclosed volumes are highly correlated to each other's, and poorly correlated to various curvatures for six test sets of molecules. Different curvatures are weakly correlated to each other for six test sets of molecules, but are strongly correlated to each other within each test set of molecules. Based on correlation analysis, we construct twenty six nontrivial nonpolar solvation models. Our numerical results reveal that the LJ potential plays a vital role in nonpolar solvation modeling, especially for molecules involving strong van der Waals interactions. It is found that curvatures are at least as important as surface area or surface enclosed volume in nonpolar solvation modeling. In conjugation with the GPB model, various curvature‐based nonpolar solvation models are shown to offer some of the best solvation free energy predictions for a wide range of test sets. For example, root mean square errors from a model constituting surface area, volume, mean curvature, and LJ potential are less than 0.42 kcal/mol for all test sets. © 2016 Wiley Periodicals, Inc.     

Nitroxide‐Mediated Radical Polymerization in Miniemulsion at Stationary State: Rationale for Independence of Polymerization Rate on Nitroxide Partitioning Using Oil‐Phase Initiation

Summary: Simulations based on the kinetics and mechanism of nitroxide‐mediated free radical polymerization (NMP) have been carried out in order to understand the hitherto largely unexplained effects (or lack thereof) of nitroxide partitioning in aqueous miniemulsion NMP. The focus has been on the miniemulsion NMP of styrene mediated by TEMPO and 4‐hydroxy‐TEMPO, two nitroxides with very similar activation‐deactivation equilibria, but very different organic phase‐aqueous phase partition coefficients. The general conclusion is that the organic phase propagating radical and nitroxide concentrations are unaffected by the partition coefficient in the stationary state, but the rate of polymerization and the extent of bimolecular termination increase with increasing nitroxide water solubility in the pre‐stationary state region. Specific NMP systems are, therefore, affected differently by nitroxide partitioning depending on whether polymerization predominantly occurs in the stationary state or not, which in turn is governed mainly by the activation‐deactivation equilibrium constant and the rate of thermal initiation.

Simulated organic‐phase propagating radical concentrations in the presence of thermal initiation for TEMPO‐mediated miniemulsion free radical polymerization of styrene for different nitroxide partitioning coefficients at 125 °C.