Influence of side chains assembly on the structure and transport properties of comb-like polysiloxanes in hydrocarbon separation

We have synthesized a number of comb-like polysiloxanes with linear, branched, cyclic and silicon-containing substituents; most of them are new and previously not studied polymers. The physicochemical properties of comb-like polysiloxanes have been systematically investigated. Differential-scanning calorimetry and wide-angle X-ray scattering data revealed the side-chain microphase assembly for polymers with linear aliphatic substituents, while the polymers with bulky substituents did not form a microphase. It is shown that the ratio of microphase in the polymer is greater, the closer the values of the thickness of the microphase layer and the length of the cross-link. The effect of the side-chain substituent on the hydrocarbon transport properties of comb-like polysiloxanes was studied. All synthesized polymers are promising as membrane materials for a vital process of hydrocarbon separation. This is associated with an increase in the solubility selectivity of n-butane/methane because the solubility coefficient of methane sharply decreases when long side chains are introduced into the polysiloxane. It was shown for the first time that microphase forming polymers have a significantly higher butane/methane selectivity (23.2–27.5) than polysiloxanes not forming a microphase (selectivity 12.3–20.0). The effect is demonstrated on polysiloxanes with various types of side substituents. It was revealed that for the comb-like polysiloxanes, the diffusivity selectivity and permselectivity are proportional to the fraction of the side-chain microphase in the polymer. With the increase in the hydrocarbon microphase share, the diffusion coefficient of the permanent gas methane is decreasing more rapidly than n-butane, which dissolves well in hydrocarbons and plasticizes polymer. Consequently, the polymers forming the microphase have a higher selectivity C₃₊/CH₄ in the separation of a multicomponent hydrocarbons mixture.     

Synthesis of networked polymers by copolymerization of monoepoxy‐substituted lithium sulfonylimide and diepoxy‐substituted poly(ethylene glycol), and their properties

Networked polymers that had poly(ethylene glycol) (PEG) chains and lithium sulfonylimide salt structures were prepared by curing a mixture of poly(ethylene glycol) diglycidyl ether and lithium 3‐glycidyloxypropanesulfonyl‐trifluoromethanesulfonylimide with poly(ethylene glycol) bis(3‐aminopropyl) terminated. The obtained flexible self‐standing networked polymer films showed high thermal and mechanical stability with relatively high ionic conductivity. The room temperature ionic conductivity under a dry condition was in the range of 10^?5 ～ 10^?4 S m^?1, which is one order of magnitude higher than the corresponding networked polymers having lithium sulfonate salt structures (10^?6 ～ 10^?5 S m^?1). The film sample became swollen by immersing in propylene carbonate (PC) or PC solution of lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). The sample swollen in PC showed higher ionic conductivity (7.2 × 10^?3 S m^?1 at room temperature), and the sample swollen in 1.0 M LiTFSI/PC showed much higher ionic conductivity (8.2 × 10^?1 S m^?1 at room temperature). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Polysiloxane cationic biocides with imidazolium salt (ImS) groups, synthesis and antibacterial properties

Novel polysiloxanes with pendant biocidal N,N′-dialkylimidazolium salt (ImS) groups were synthesized and compared with polysiloxanes bearing conventional biocidal quaternary ammonium salt (QAS) groups. The bacteriostatic power of these polymers was tested and compared under the same conditions in aqueous solution against two common strains of Gram positive bacteria and three strains of Gram negative bacteria. These new ImS containing polymers exhibited high antibacterial potency against all bacteria studied, similar to those substituted with QAS groups. The advantage of the imidazolium substituted polysiloxane stems from its higher thermal stability, as compared with the quaternary alkylammonium functionalized polymer, as demonstrated by thermogravimetric studies.     

Physical and electrolytic properties of difluorinated dimethyl carbonate

The physical and electrolytic properties of difluorinated dimethyl carbonate (DFDMC) synthesized using F₂ gas (direct fluorination) were examined. The dielectric constant and viscosity of DFDMC are higher than those of monofluorinated dimethyl carbonate (MFDMC) and dimethyl carbonate (DMC). The oxidative decomposition voltage of DFDMC is higher than those of DMC and MFDMC. The specific conductivity in DFDMC solution is considerably lower than those in MFDMC and DMC solutions. The ethylene carbonate (EC)-DFDMC equimolar binary solution containing 1 mol dm⁻³ LiPF₆ shows a moderate conductivity of 6.91 mS cm⁻¹ at 25 °C. The lithium electrode cycling efficiency (charge-discharge coulombic cycling efficiency of lithium electrode) in EC-DFDMC equimolar binary solution containing 1 mol dm⁻³ LiPF₆ is higher than 80%. The EC-DFDMC solution is a good electrolyte for rechargeable lithium batteries.     

Synthesis of networked polymers with lithium counter cations from a difunctional epoxide containing poly(ethylene glycol) and an epoxide monomer carrying a lithium sulfonate salt moiety

Poly(ethylene glycol)‐based networked polymers that had lithium sulfonate salt structures on the network were prepared by heating a mixture of poly(ethylene glycol) diglycidyl ether (PEGGE), poly(ethylene glycol) bis(3‐aminopropyl) terminated (PEGBA), and an ionic epoxy monomer, lithium 3‐glycidyloxypropanesulfonate (LiGPS). Flexible self‐standing networked polymer films showed high thermal stability, low crystallinity, low glass transition temperature, and good mechanical strength. The materials were ion conductive at room temperature even under a dry condition, although the ionic conductivity was rather low (10^?6 to 10^?5 S/m). The ionic conductivity increased with the increase in temperature to above 1 × 10^?4 S/m at 90 °C. The film samples became swollen by immersing in propylene carbonate (PC) or PC solution of lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). The samples swollen in PC showed higher ionic conductivity (ca.1 × 10^?3 S/m at room temperature), and the samples swollen in LiTFSI/PC showed much higher ionic conductivity (nearly 1 S/m at room temperature). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3113–3118, 2010     

Novel siloxane polymers as polymer electrolytes for high energy density lithium batteries

A variety of disubstituted (double-comb) polysiloxane polymers have been prepared containing linear, branched, and cyclic oligoethyleneoxide units, –(OCH₂CH₂)_n–, in the side chains and as part of the siloxane backbone. Copolymers, using mixtures of linear ethylene oxide side chains, were also synthesized. These polymers were doped with LiN(SO₂CF₃)₂ (LiTFSI, 1) and conductivities of the polymer-salt complexes were determined as a function of temperature and doping level. The maximum conductivity of these polymers at 25 ° C was 2.99 ×10^–4, for a copolymer containing equimolar amounts of side chains with n = 5 and 6.     

Interactions and Transport in Highly Concentrated LiTFSI-based Electrolytes

To elucidate what properties control and practically limit ion transport in highly concentrated electrolytes (HCEs), the viscosity, ionic conductivity, ionicity, and transport numbers were studied for nine model electrolytes and connected to the rate capability in Li-ion battery (LIB) cells. The electrolytes employed the LiTFSI salt in three molar ratio concentrations; 1 : 2, 1 : 4, and 1 : 16 (LiTFSI:X) vs. solvents (X) with different permittivities; tert-butyl methyl ether (MTBE), tetrahydrofuran (THF) and propylene carbonate (PC). While the low polarity MTBE creates liquid electrolytes, ion-pairing limits the ionic conductivity despite extremely low viscosities. For the less concentrated 1 : 16 LiTFSI:MTBE and 1 : 16 LiTFSI:THF electrolytes the ionic diffusivities decrease with increased temperature, a sign of aggregation, but still their ionic conductivities and LIB performance increase. In general, the low ionic conductivity and high viscosity both limit the use of HCEs in LIBs, and no compensating mechanism seems to be present.     

Preparation of substituted network polysilanes by a disproportionation reaction of ethoxydisilane initiated by a small amount of organolithium reagents

Network methylethoxypolysilanes containing various substituents such as phenyl, butyl, phenylene, thiophene, and anthracene groups were prepared by a disproportionation reaction of 1,1,2,2-tetraethoxy-1,2-dimethyldisilane initiated by addition of a small amount of organolithium reagents that have the corresponding substituents. The reaction was considered to be catalyzed by lithium ethoxide, which was formed by the substitution reaction of the ethoxydisilane with the lithium reagents. Both the substituted and pristine disilanes participated in the disproportionation reaction to yield the network polysilanes. The amount of the substituents and the molecular weight of the polysilanes varied, depending on what and how much of the lithium reagent were used. The electrical conductivity of some polysilanes was measured, and polymers with thiophene or anthracene groups were found to show relatively higher conductivity of 10⁻⁴ Scm⁻¹ after iodine doping. © 1997 John Wiley & Sons, Inc.     

LiTFSI as a plastic salt in the quasi-solid state polymer electrolyte for dye-sensitized solar cells

Ionic conductivity and the type of ions are important for the composite polymer electrolyte (CPE) of the dye-sensitized solar cells (DSSCs). Lithium bis(trifluoromethane sulphone)imide (LiTFSI for short) which is easy to dissociate, is added in the composite polymer electrolyte(CPE) as a plasticizer. The LiTFSI acts differently from the conventional LiClO₄. LiTFSI changes the conformation of the polymer chain and shows higher ionic conductivity than LiClO₄. That contributes to the improvement of the short current density of the DSSC. Furthermore, the DSSCs with LiTFSI modification show higher photovoltage than the LiClO₄. The anions of TFSI^? prohibit the interface recombination more effectively compared with the LiClO₄ as the electrochemical impedance spectroscopy indicated. With the LiTFSI modified electrolyte, the performances of the DSSCs under 1 Sun, AM1.5 are improved and reaches the highest of 4.82% at the LiTFSI:LiI = 0.116:1, much better than the original DSSC(3.6%) and the LiClO₄ modified CPE electrolyte DSSC(4.32%).     

Branched polyacrylamides: Synthesis and effect of molecular architecture on solution rheology

Linear, star and comb-like polyacrylamides (PAM) have been prepared by atomic transfer radical polymerization (ATRP) in aqueous media at room temperature. The influence of the molecular architecture of PAM on the rheological properties in aqueous solution has been investigated. The well-known theory of increased entanglement density by branching for polymers in the melt can also be applied to polymers in the semi-dilute water solutions. We have demonstrated this by investigating the rheological properties of PAM of similar molecular weights with different molecular architectures. Interestingly, the solution viscosity of a comb PAM is higher compared to its linear and star analogues (both at equal span molecular weight, M_n,SPAN, and total molecular weight, M_n,tot). In addition to the pure viscosity, we also demonstrate that the visco-elastic properties of the polymeric solutions depend significantly on the molecular architecture of the employed PAM. The elastic response of water solutions containing comb PAM is more pronounced than for solutions containing either linear or star PAM at similar M_n,SPAN and M_n,tot. The obtained results pave the way for application of these polymeric materials in Enhanced Oil Recovery (EOR).     

Synthesis and characterization of phosphonate‐containing polysiloxanes

Phosphonate‐functionalized polysiloxanes have been prepared with a new siloxane/phosphonate monomer. The reaction of 3‐chloropropylmethyldimethoxysilane with trimethylphosphite or triethylphosphite produces several new monomers containing pendant phosphonate groups. Copolymerization with dimethyldimethoxysilane has produced polymers soluble in most organic solvents. The acid hydrolysis of the phosphoryl esters has produced hydrophilic siloxane polymers containing phosphonic acid groups. The thermal properties of the polymers and several related small molecules have been compared with thermogravimetric analysis. Both the monomers and the resulting polymers have been characterized with ¹H, ¹³C, ³¹P, and ²⁹Si NMR. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 48–59, 2003     

Synthesis of ionic polymers by free radical polymerization using aprotic trimethylsilylmethyl-substituted monomers

Aprotic ionic polymers containing trimethylsilylmethyl-substituted imidazolium structures are synthesized using free radical polymerization of monomers comprising a vinyl group either at the cation or at the anion. Bulk polymerization is used for the room temperature ionic liquid monomer 1-trimethylsilylmethyl-3-vinylimidazolium bis(trifluoromethylsulfonyl)imide. In contrast to this, solution polymerization is applied for 1-trimethylsilylmethyl-3-methylimidazolium p-styrene sulfonate because this monomer undergoes self-polymerization during melting at a higher temperature than selected for bulk polymerization. Glass transition temperature (T _g) of the ionic polymers and intrinsic viscosity measurements indicate differences between these polymers, which are composed either of a polycation with a trimethylsilylmethyl substituent at each vinylimidazolium segment of the polymer chain and mobile bis(trifluoromethylsulfonyl)imide (NTf₂⁻) anions or a polyanion containing p-styrene sulfonate segments and mobile 1-trimethylsilylmethyl-3-methylimidazolium cations. The new aprotic ionic polymers containing trimethylsilylmethyl substituents may be interesting for application in adhesive, interlayer and membrane manufacturing.     

Effect of terminal perfluorocarbon chain containing mesogens on phase behaviors of chiral comb-like liquid crystalline polymers

A novel perfluorinated liquid crystal 4′-(2,2,3,3,4,4,5,5,6,6,7,7,8,8,8-pentadecafluorooctanoyloxy)biphenyl-4-yl undec-10-enoate (PFOBU) was synthesized, which exhibited smectic C phase. Several liquid crystalline polymers (PI–PVI) were synthesized by use of poly(methylhydrogeno)siloxane, PFOBU, and cholesteryl 3-(4-allyloxy-phenyl)-acryloate. The chemical structures and liquid crystalline (LC) properties of the monomers and polymers, and some ferroelectric properties of the chiral smectic C (S_C^*) phase were characterized by use of various experimental techniques. The effect of perfluorocarbon chains on phase behaviors of the fluorinated LC polysiloxanes was studied as well. PI and PII showed single chiral nematic (N^*) mesophase when they were heated and cooled, but PIII, PIV, PV, and PVI containing more perfluorocarbon chain units exhibited S_C^* phase besides N^* mesophase. Introduction of perfluorocarbon chain containing mesogens to the chiral cholesteryl-containing polymer systems resulted in a S_C^* mesophases, indicating that the fluorophobic effect could lead to microphase segregation and modifications of smectic mesophases from the chiral nematic phase.     

Composite poly(ethylene carbonate) electrolytes with electrospun silica nanofibers

We prepared a ternary composite polymer electrolyte from poly(ethylene carbonate) (PEC), lithium bis(trifluoromethanesulfonyl) imide (LiTFSI) and non‐calcined silica nanofibers (SNFs) having 3 average diameters (300, 700, and 1000 nm). The SNF composite electrolytes were obtained as homogeneous, self‐standing membranes. The ionic conductivity of PEC/LiTFSI 100 mol% was increased by the addition of SNFs, and the thinner SNFs with average diameter 300 nm were most effective in improving the conductivity. The conductivity was of the order of 10⁻⁴ S/cm at 60°C. The lithium transference number of the SNF₃₀₀ composite was greater than 0.7. Stress‐strain curves of the composites indicated significant increases in Young's modulus and maximum stress for the PEC electrolytes. The 5% weight‐loss temperature of the composites also improved with the addition of SNF.     

Synthesis and Helical Structure of Poly(1‐methylpropargyl ester)s with Various Side Chains

Optically active 1‐methylpropargyl esters bearing various substituents were polymerized with [(nbd)Rh]⁺[η⁶‐C₆H₅B(C₆H₅)₃]^? (nbd=norbornadiene) as a catalyst to afford the corresponding poly(1‐methylpropargyl ester)s with moderate molecular weights in good yields. The polymers have a cis‐stereoregular structure, which was determined by ¹H NMR spectroscopy. Large optical rotations and clear CD signals demonstrated that all these polymers take on a helical structure with a predominantly one‐handed screw sense. The polymers exhibited large viscosity indices in the range 1.14–1.75. Chiral amplification was observed in R/S copolymerization. Conformational analysis revealed that the polymers form a tightly twisted helical structure with a dihedral angle of 70° at the single bond of the main chain.     

Modification and Dispersion of the Polysiloxane Materials with Perfluorocarbon Groups and Cationic Side Chains

Novel polysiloxane material modified with perfluorocarbon groups and quaternary cationic side chains was synthesized by ring-opening polymerization of cyclosiloxane and graft reaction. The polysiloxane polymers containing pendant groups were the polysiloxanes modified with amino group, perfluorocarbon side chain, tertiary and perfluorocarbon side chains, or quaternary cationic and perfluorocarbon groups. The yields of the modified polymers were 94.2%, 86.7%, 88.4%, 82.5%, respectively. FTIR, ¹H NMR, ¹³C NMR, and ¹⁹F NMR were used to characterize the structures of the polysiloxane materials. The dispersion technology of the polysiloxane materials was investigated. The polysiloxane material modified with perfluorocarbon and cationic groups imparted high surface activity. The polyesters treated with the polymers had good repellency to water.     

Cyclolinear polysiloxanes. I. Synthesis and characterization

The synthesis and characterization of two novel cyclic siloxanes, diacetoxydiethyltetramethylcyclotetrasiloxane and diacetoxytriethylpentamethylcyclopentasiloxane, and cyclolinear polymers synthesized from these monomers are presented. The cyclic siloxanes were synthesized from tetramethylcyclotetrasiloxane and pentamethylcyclopentasiloxane, respectively, by acetylation followed by ethylation. The cyclic monomers were characterized with ¹H NMR spectroscopy. Subsequently, the cyclic siloxanes were self‐condensed into cyclolinear polysiloxanes and cocondensed (extended) with silanol‐terminated polydimethylsiloxane into high‐molecular‐weight polymers containing cyclic units withlinearpolydimethylsiloxane spacers (extended cyclolinear polysiloxanes). The molecular weights of both the cyclolinear polysiloxanes and extended cyclolinear polysiloxanes were determined. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4039?4052, 2006     

Synthesis and Properties of Poly(1,6-Heptadiyne) Derivatives Containing Hydroxy Functional Group

Abstract

1,6-Heptadiyne derivatives containing hydroxy and aromatic substituents, 4-hydroxy-4-phenyl-l,6-heptadiyne (HPHD), 4-hydroxy-4-(4′-methylphenyl)-l,6-heptadiyne (HMHD), and 4-hydroxy-4-(4′-methoxy-phenyl)-l,6-heptadiyne (HMOHD), were prepared and polymerized by various transition metal catalyst systems. A molybdenum complex was found to be the most effective catalyst for the cyclopolymerization of 4-hydroxy-l,6-heptadiyne derivatives. Polymerization of 4-hydroxy-l,6-heptadiyne derivatives by MoCl₅-based catalysts gave soluble and highly colored polymers. HMOHD containing the methoxy functional group showed the highest reactivity in cyclopolymerization. The structures of the resulting polymers were elucidated with IR, ¹H- and ¹³C-NMR, and UV-visible spectroscopies. The present polymers were thermally and oxidatively more stable and had higher number-average molecular weights (M_n) of 2 × 10⁴ to 3 ×10⁴ than the corresponding 4-hydroxy-1,6-heptadiyne derivatives containing aliphatic substituents.     

P4VP and oligo(phenylenevinylene)‐perylenebisimide mixed donor‐acceptor supramolecular comb polymer complexes with improved charge carrier mobility

Random donor‐acceptor (D‐A) supramolecular comb polymers were formed when hydroxyl functionalized donor and acceptor small molecules based on Oligo(phenylenevinylene) (named OPVCN‐OH ) and Perylenebisimide (named UPBI‐PDP ), respectively, were complexed with Poly(4‐vinyl pyridine) (P4VP). A series of random D‐A supramolecular comb polymers were formed by varying the ratios of UPBI‐PDP and OPVCN‐OH with P4VP. A 100% P4VP‐donor polymer complex [ P4VP(OPV_1.00 )] and a 100% P4VP‐acceptor polymer complex [ P4VP(UPBI_1.00 )] were also synthesized and characterized. Complex formation was confirmed by FT‐IR and ¹H NMR spectroscopy. Solid state structural studies carried out using small angle X‐ray scattering and wide angle X‐ray diffraction experiments revealed altered packing of the D and A molecules in the complexes. Transmission electron microscopy images showed lamellar structures in the < 10 nm scale for the P4VP(OPV_1.00 ), P4VP(UPBI_1.00 ), and mixed P4VP (D‐A) complexes. The effect of the nanoscopic D‐A self‐assembly on the bulk mobility of the materials was probed using SCLC measurements. The mixed D‐A random complexes exhibited ambipolar charge transport characteristics with higher values for the average bulk hole mobility estimate. P4VP(OPV_0.25 + UPBI_0.75) exhibited an average hole mobility in the order of 10^?2cm² V^?1 s^?1 and electron mobility 10^?5cm² V^?1 s^?1. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2403–2412     

Protective layer with oligo(ethylene glycol) borate anion receptor for lithium metal electrode stabilization

The gel polymer electrolyte based on semi-IPN (interpenetrating polymer network) structure for the protection of lithium metal electrode was successfully developed by ultraviolet (UV) radiation-curing method. A curable mixed solution consists of linear polymer (Kynar 2801), crosslinking agent (1,6-hexanediol diacrylate), liquid electrolyte (ethylene carbonate (EC)/propylene carbonate (PC)/1 M LiClO₄), oligo(ethylene glycol) borate (OEGB) anion receptor, and photoinitiator (methyl benzoylformate). The OEGB was synthesized by the dehydrocoupling reaction of hydroxyl group in di(ethylene glycol) methyl ether with hydrogen in BH₃ and characterized by ¹H NMR. The presence of OEGB anion receptor in the protection layer could lead to an enhancement in the ionic conductivity, electrochemical stability, and the interfacial properties. The deposited lithium exhibited particle-like shape resulting from the introduction of the protection layer onto the lithium electrode surface. The unit cell based on the lithium anode protected with gel polymer electrolyte containing OEGB showed higher discharge capacity than that of the unit cell without OEGB after 100 cycles at C/2 rate (1.25 mA cm⁻²).