Modified reverse microemulsion synthesis for iron oxide/silica core–shell colloidal particles

Iron oxide/silica core–shell colloidal particles were prepared by basic reverse microemulsion (RM) method and two modified RM methods. By basic RM method, maximum particle size obtained was mere 40 nm. For building photonic crystals working in the visible range, the colloidal particles must be larger than 100 nm. Thus two modified RM methods were used. By alcohol modified RM method, short chain alcohols were used as co-surfactant. The particle size rose to near 100 nm, but the core–shell structure was comparatively poor. By emulsifier pair modified RM method, the particle size leapt to over 200 nm and a narrow growth window was found favorable to enhance the stability and rigidity of the surfactants layers. The core–shell mechanism was also discussed and a new four-step mechanism was proposed.     

Preparation and properties of silica–gold core–shell particles

Silica-metal core–shell particles, as for instance those having siliceous core and nanostructured gold shell, attracted a lot of attention because of their unique properties resulting from combination of mechanical and thermal stability of silica and magnetic, electric, optical and catalytic properties of metal nanocrystals such as gold, silver, platinum and palladium. Often, the shell of the core–shell particles consists of a large number of metal nanoparticles deposited on the surface of relatively large silica particles, which is the case considered in this work. Namely, silica particles having size of about 600 nm were subjected to surface modification with 3-aminopropyltrimethoxysilane. This modification altered the surface properties of silica particles, which was demonstrated by low pressure nitrogen adsorption at ?196 °C. Next, gold nanoparticles were deposited on the surface of aminopropyl-modified silica particles using two strategies: (i) direct deposition of gold nanoparticles having size of about 10 nm, and (ii) formation of gold nanoparticles by adsorption of tetrachloroauric acid on aminopropyl groups followed by its reduction with formaldehyde.The overall morphology of silica–gold particles and the distribution of gold nanoparticles on the surface of modified silica colloids were characterized by scanning electron microscopy. It was shown that direct deposition of colloidal gold on the surface of large silica particles gives more regular distribution of gold nanopartciles than that obtained by reduction of tetrachloroauric acid. In the latter case the gold layer consists of larger nanoparticles (size of about 50 nm) and is less regular. Note that both deposition strategies afforded silica–gold particles having siliceous cores covered with shells consisting of gold nanoparticles of tunable concentration.     

Poly(ethylene oxide)–poly(ethylene imine) block copolymers as templates and catalysts for the in situ formation of monodisperse silica nanospheres

Block copolymers based on poly(ethylene oxide) (PEO) and poly(ethylene imine) (PEI) are efficient catalysts/templates for the formation of uniform silica nanoparticles. Addition of tetraethylorthosilicate to a solution of PEO–PEI or PEI–PEO–PEI block copolymers results in the formation of silica particles with a diameter of ca. 30 nm and narrow size distribution. The particles precipitated with the diblock copolymers can be redispersed in water after isolation as individual nanoparticles. Evidently, block copolymers based on PEO and PEI serve as excellent templates for the biomimetic and “soft” synthesis of silica nanoparticles.

Biomimetic synthesis of raspberry-like hybrid polymer–silica core–shell nanoparticles by templating colloidal particles with hairy polyamine shell

The nanoparticles composed of polystyrene core and poly[2-(diethylamino)ethyl methacrylate] (PDEA) hairy shell were used as colloidal templates for in situ silica mineralization, allowing the well-controlled synthesis of hybrid silica core–shell nanoparticles with raspberry-like morphology and hollow silica nanoparticles by subsequent calcination. Silica deposition was performed by simply stirring a mixture of the polymeric core–shell particles in isopropanol, tetramethyl orthosilicate (TMOS) and water at 25 °C for 2.5 h. No experimental evidence was found for nontemplated silica formation, which indicated that silica deposition occurred exclusively in the PDEA shell and formed PDEA–silica hybrid shell. The resulting hybrid silica core–shell particles were characterized by transmission electron microscopy (TEM), thermogravimetry, aqueous electrophoresis, and X-ray photoelectron spectroscopy. TEM studies indicated that the hybrid particles have well-defined core–shell structure with raspberry morphology after silica deposition. We found that the surface nanostructure of hybrid nanoparticles and the composition distribution of PDEA–silica hybrid shell could be well controlled by adjusting the silicification conditions. These new hybrid core–shell nanoparticles and hollow silica nanoparticles would have potential applications for high-performance coatings, encapsulation and delivery of active organic molecules.     

X-ray imaging of newly-developed gadolinium compound/silica core–shell particles

A preparation method for gadolinium compound (Gd) nanoparticles coated with silica (Gd/SiO₂) is proposed. Gd nanoparticles were prepared with a homogeneous precipitation method at 80 °C using 1.0 × 10⁻³ M Gd(NO₃)₃ and 0.5 M urea in the presence of 1.0 g/L stabilizer. Among stabilizers examined. Sodium n-dodecyl sulfate (SDS) was suitable as the stabilizer for preparing small Gd nanoparticles, and consequently Gd nanoparticles with a size of 46.2 ± 12.4 nm were prepared using the SDS. Silica-coating of the Gd nanoparticles was performed by a St?ber method at room temperature using 0.013 M TEOS and 2.0 × 10⁻³ M NaOH in water/1-propanol solution in the presence of 1.0 × 10⁻³ M Gd nanoparticles, which resulted in production of Gd/SiO₂ particles with an average size of 64.2 ± 14.4 nm. The Gd/SiO₂ particles were surface-modified with 3-aminopropyltrimethoxysilane and succinic anhydride. It was confirmed by measurement of electrophretic light scattering that amino group or carboxyl group was introduced onto the Gd/SiO₂ particles. The gadolinium concentration of 1.0 × 10⁻³ M in the as-prepared colloid solution was increased up to a gadolinium concentration of 0.4 M by centrifugation. The core–shell structure of Gd/SiO₂ particles was undamaged, and the colloid solution was still colloidally stable, even after the concentrating process. The concentrated Gd/SiO₂ colloid solution showed an X-ray image with contrast as high as a commercial Gd complex contrast agent. Internal organs in a mouse could be imaged injecting the concentrated colloid solution into it.     

Sol–gel synthesis of porous inorganic materials using “core–shell” latex particles as templates

Here we report on the sol–gel synthesis of porous inorganic materials based on manganese, molybdenum, and tungsten compounds using the “core–shell” siloxane-acrylate latex as a template. The chemical composition and structural characteristics of the materials obtained have been investigated. It was shown that temperature conditions and gaseous media composition during the template destruction controlled the composition and structure of porous materials. To obtain porous inorganic materials for catalytic applications, the “core–shell” latex template was preliminarily functionalized by gold and palladium nanoparticles obtained by thermal reduction of noble metal ions-precursors in a polycarboxylic “shell”. Upon the template removal, noble metals nanoparticles of a size of dozens of nanometers were homogeneously distributed in the material porous structure. The evaluation of the catalytic activity of macroporous manganese, tungsten, and molybdenum oxides under the conditions of liquid phase catalytic oxidation of organic dyes has been performed. The prospects of employing macroporous oxide systems with immobilized nanoparticles of noble metals in the processes of hydrothermal oxidation of radionuclide organic complexes in radioactive waste decontamination have been demonstrated.     

Silica–silver core–shell particles for antibacterial textile application

The silica–silver core–shell particles were synthesized by simple one pot chemical method and were employed on the cotton fabric as an antibacterial agent. Extremely small (1–2 nm) silver nanoparticles were attached on silica core particles of average 270 nm size. The optimum density of the nano silver particles was found which was sufficient to show good antibacterial activity as well as the suppression in their surface plasmon resonance responsible for the colour of the core–shell particle for antibacterial textile application. The change in the density and size of the particles in the shell were monitored and confirmed by direct evidence of their transmission electron micrographs and by studying surface plasmon resonance characteristics. The colony counting method of antibacterial activity testing showed excellent results and even the least silver containing core–shell particles showed 100% activity against bacterial concentration of 10⁴ colony counting units (cfu). The bonding between core–shell particles and cotton fabric was examined by X-ray photoelectron spectroscopy. The antibacterial activity test confirmed the firm attachment of core–shell particles to the cotton fabric as a result 10 times washed sample was as good antibacterial as that of unwashed sample. The bacterial growth was inhibited on and beneath the coated fabric, at the same time no zone of inhibition which occurs due to the migration of silver ions into the medium was observed indicating immobilization of silver nanoparticles on silica and core–shell particles on fabric by strong bonding.     

Electrical surface charge and potential of hematite/yttrium oxide core–shell colloidal particles

Interest in the synthesis of composite colloidal particles consisting of a core and shell with different compositions stems from the fact that such particles can be useful in processes where the properties of both core (e.g., size and shape homogeneity, ease of preparation in large amounts, magnetic characteristics, etc.) and shell (interfacial properties, porosity, chemical stability, etc.) might be of interest. However, the applicability must be based on a proper characterization of those properties. In this work, colloidal spheres of hematite (α-Fe₂O₃) were used as nuclei of mixed particles where the shell is yttrium oxide. The electrical properties of the aqueous interface are compared to those of the pure oxides by means of potentiometric titration of their surface charge and potential against pH, as a function of indifferent electrolyte concentration. It is found that the mixed particles efficiently mimic yttrium oxide, since the behavior of their surface electrical characteristics closely resembles that of the latter compound. Differences are found, however, that can be ascribed to an incomplete or porous coverage, but such divergences are of little significance when an overall comparison is carried out. Received: 30 January 2001 Accepted: 11 July 2001     

Controlled preparation of core–shell polystyrene/polypyrrole nanocomposite particles by a swelling–diffusion–interfacial polymerization method

Polystyrene/polypyrrole (PS/PPy) core–shell nanocomposite particles with uniform and tailored morphology have been successfully synthesized using the “naked” PS particulate substrate with the aid of a proposed strategy, the so-called swelling–diffusion–interfacial polymerization method. After initially forming pyrrole-swollen PS particles, diffusion of the monomer toward the aqueous phase was controlled through the addition of hydrochloric acid, eventually leading to its polymerization on the substrate particle surface. This process allows the nanocomposite particles to possess uniform and intact PPy overlayer and affords much more effective control over the structure and morphology of the resultant nanocomposites by simply changing the PS/pyrrole weight ratio or the addition amount of the doping acid. In particular, the nanocomposite particles with a thin, uniform, and intact PPy overlayer and their corresponding PPy hollow particles were obtained at a low addition amount of pyrrole. The resultant nanocomposite particles have been extensively characterized using scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, and thermogravimetry.     

Morphology and film formation of poly(butyl methacrylate)–polypyrrole core–shell latex particles

 Core–shell latex particles made of a poly(butyl methacrylate) (PBMA) core and a thin polypyrrole (PPy) shell were synthesized by two-stage polymerization. In the first stage, PBMA latex particles were synthesized in a semicontinuous process by free-radical polymerization. PBMA latex particles were labeled either with an energy donor or with an energy acceptor, in two different syntheses. These particles were used in a second stage as seeds for the synthesis of the core–shell particles. The PPy shell was polymerized around the PBMA core latex in an oxidative chemical in situ polymerization. Proofs for the success of the core–shell synthesis were obtained using nonradiative energy transfer (NRET) and atomic force microscopy (AFM). NRET gives access to the rate of polymer chain migration between adjacent particles in a film annealed at a temperature above the glass-transition temperature T _g of the particles. Slower chain migration of the PBMA polymer chains was obtained with the PBMA–PPy core–shell particles compared to rate of the PBMA polymer chain migration found with the pure, uncoated PBMA particles. This result is due to the coating of PBMA by PPy, which hinders the migration of the PBMA polymer chains between adjacent particles in the film. This observation has been confirmed by AFM measurements showing that the flattening of the latex film surface is much slower for the core–shell particles than for the pure PBMA particles. This result can again be explained by the presence of a rigid PPy shell around the PBMA core. Thus, these two complementary methods have given evidence that real core–shell particles were synthesized and that the shell seriously hinders film formation of the particles in spite of the fact that it is very thin (thickness close to 1 nm) compared to the size (750 and 780 nm in diameter) of the PBMA core. Transparency measurements confirm the results obtained by NRET and AFM. When the films are placed at a temperature higher than the T _g of PBMA, the increase in transparency is faster for films made with the uncoated PBMA particles than for films made with the coated PBMA particles. This result indicates again that the presence of the rigid PPy layer around the PBMA core reduces considerably the speed at which the structure of the film is modified when heated above the T _g of PBMA. Received: 02 September 1999 Accepted: 21 December 1999     

Synthesis of bifunctional core–shell particles with a porous zeolite core and a responsive polymeric shell

The aim of our work is the synthesis and characterization of colloidal core–shell particles with a zeolite core and an environmentally responsive shell. We have synthesized colloidal ZSM-5 zeolite and modified the surface with 3-(trimethoxysilyl)propyl methacrylate in order to introduce double bonds at the surface. The cross-linked polymeric shell was prepared by precipitation polymerization using the functionalized zeolite particles as seeds. We employed thermoresponsive poly(N-isopropylacrylamide) and pH-responsive poly(vinylpyridine) as the polymeric shell, respectively. The temperature- and pH-depending swelling and deswelling of the core–shell particles were characterized with dynamic light scattering techniques. Transmission electron microscopy pictures show the morphology of the synthesized particles. It is proposed that these types of bifunctional core–shell particles could be of use for controlled uptake and release applications and separation of molecules.     

Sol–gel synthesis of iron oxide–silica composite microstructures

Spherical silica particles doped with iron oxide have been synthesized via base-catalyzed one-pot sol?Cgel process using tetraethoxysilane (TEOS) and iron(III) ethoxide (ITE) as co-precursors. In the modified St?ber process adopted, depending on the concentration of ITE in the starting composition, materials of various morphologies were observed under a scanning electron microscope and an atomic force microscope. The presence of ITE significantly affected the formation process of particulate silica; the spherical particles were formed accompanied by the co-presence of irregular-shaped finer aggregates. The fraction of the aggregates with rough surfaces increased with an increase of the ITE content in the reaction mixture. Both the spherical particles and irregular-shaped aggregates contained iron hydroxide and they exhibited paramagnetic behavior. The chemical composition and physicochemical properties of the materials were determined using various complementary spectroscopic methods.     

Poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene)oxide triblock copolymers at the water/air interface and in foam films

The behavior of commercial poly(ethylene oxide)(PEO)–poly(propylene oxide)(PPO)–PEO triblock copolymers at the water/air interface and in microscopic foam films is studied. In aqueous solution these amphiphilic nonionic substances exhibit a surfactant-like aggregation and adsorption behavior. Even below the critical micelle concentration (cmc) the surface concentration is so high that the PEO chains are squeezed and protrude into the solution in order to accommodate to the situation at the interface. As evidenced by measurements of the ellipticity of light reflected from the free surface of the solution a PEO brush is created at the fluid interface. The microscopic foam film is used as a tool for investigating the normal interaction between two PEO brushes facing each other. Stable foam films are obtained at concentrations below the cmc and steric repulsion predominates (in 0.1 M NaCl). A brush-to-brush contact is established only at higher capillary pressures and the disjoining pressure isotherm follows de Gennes' scaling prediction. At lower pressure a softer steric repulsion occurs. It is governed by the bulk copolymer concentration and hence is fundamentally different from the brush-to-brush repellency. On the whole PEO–PPO–PEO copolymers behave as nonionic surfactants, but the large size of their molecules exemplifies the excluded-volume features. Received: 13 July 1999/Accepted: 27 July 1999     

Synthesis and characterization of amino-functionalized single magnetic core–silica shell composites

The thermal decomposition approach, reverse micro-emulsion system and surface modification technique had been successfully used to synthesis single magnetic core Fe₃O₄@Organic Layer@SiO₂–NH₂ complex microspheres. The magnetization of the magnetic microspheres core could be easily tuned between 28 and 56 emu/g by adjusting the amount of 2-mercaptobarbituric acid. It was found that the Organic Layer to some extent had a protective effect on avoiding Fe₃O₄ being oxidized into Fe₂O₃. Each Fe₃O₄@Organic Layer microsphere could be coated uniformly by about 30 nm of silica shell. The average diameter of the Fe₃O₄@Organic Layer@SiO₂ composites was about 538 nm. The saturation magnetization of the Fe₃O₄@Organic Layer@SiO₂ complex microspheres was 12.5% less than magnetic microspheres cores. The Fe₃O₄@Organic Layer@SiO₂–NH₂ composites possessed a huge application potentiality in specificity enriching and separating biological samples.     

Melamine-assisted pyrolytic synthesis of bifunctional cobalt-based core–shell electrocatalysts for rechargeable zinc–air batteries

Designing a highly active-and stable non-noble metal bifunctional oxygen catalyst for rechargeable Znair battery remains a great challenge. Herein, we develop a facile and melamine-assisted-pyrolysis(MAP)strategy for the synthesis of core–shell Co-based electrocatalysts@N-doped carbon nanotubes(Co@CNTs)derived from metal–organic frameworks. The Co@CNTs exhibited excellent bifunctional electrocatalytic performance for both oxygen evolution and reduction. DFT calculations demonstrated that the Gibbs free energy of the rate-determining step was small enough to improve ORR activities. As a result, a Zn-air battery assembled with Co@CNTs proves a lager power density, low voltage gap between charge–discharge and excellent stability. Thus, this work offers a facile strategy to realize the synthesis of non-noble metal electrocatalyst for Zn-air battery materials with high electrochemical performance.     

Styrene–acrylic acid copolymers as new stabilizers of dispersion RAFT polymerization of butyl acrylate

The RAFT-based copolymers of acrylic acid and styrene may be successfully used as stabilizers of dispersion polymerization of butyl acrylate by providing the formation of stable block copolymer dispersion.     

Stability of Ag@SiO_2 core–shell particles in conditions of photocatalytic overall water-splitting

Core–shell nanoparticles containing plasmonic metals(Ag or Au) have been frequently reported to enhance performance of photo-electrochemical(PEC) devices. However, the stability of these particles in water-splitting conditions is usually not addressed. In this study we demonstrate that Ag@SiO_2 core–shell particles are instable in the acidic conditions in which WO_3-based PEC cells typically operate, Ag in the core being prone to oxidation, even if the SiO_2 shell has a thickness in the order of 10 nm. This is evident from in situ voltammetry studies of several anode composites. Similar to the results of the PEC experiments, the Ag@SiO_2 core–shell particles are instable in slurry-based, Pt/ZnO induced photocatalytic water-splitting. This was evidenced by in situ photodeposition of Ag nanoparticles on the Pt-loaded ZnO catalyst, observed in TEM micrographs obtained after reaction. We explain the instability of Ag@SiO_2 by OH-radical induced oxidation of Ag, yielding dissolved Ag+. Our results imply that a decrease in shell permeability for OH-radicals is necessary to obtain stable, Ag-based plasmonic entities in photo-electrochemical and photocatalytic water splitting.     

Mesoporous silica particles for selective detection of dopamine with β-cyclodextrin as the selective barricade

A mesoporous silica nanoparticle (MSN) based fluorescent sensor for dopamine was constructed with probes inside particle pores and β-cyclodextrin (β-CD) molecules on the particle surface as the selective barricade. The synergistic action of both the hydrophilic rim and hydrophobic cavity of β-CD ensures that the sensor can distinguish dopamine from other biological competitors.     

Preparation of titania hollow particles with independently controlled void size and shell thickness by catalytic templating core–shell polymer particles

Organic/inorganic hybrids were prepared by catalytic hydrolysis and subsequent polycondensation of tetra-n-butyl titanate (TnBT) in shell layers grafted on core particles. The core particles were synthesized by emulsifier-free emulsion polymerization of styrene, N-n-butyl-N-2-methacryloyloxyethyl-N,N-dimethylammonium bromide (C₄DMAEMA), and 2-chloropropionyloxyethyl methacrylate using 2,2′-azobis(2-amidinopropane) dihydrochloride as an initiator. The core diameters were controlled in the range of 70–550 nm by adjusting a C₄DMAEMA feed concentration. The core–shell particles were prepared by surface-initiated activator generated electron transfer–atom transfer radical polymerization of 2-(N,N-dimethylamino)ethyl methacrylate (DMAEMA). The sizes of core–shell particles were found to increase monotonically with an increase in a DMAEMA concentration. The hybrid particles were fabricated by adding TnBT into a water/ethanol dispersion of core–shell particles. The amounts of titania deposited increased in proportion to the grafted amounts of poly[2-(N,N-dimethylamino)ethyl methacrylate] on the core particles. The X-ray diffraction measurement revealed that the hollow titania particles obtained by heat treatment of hybrids have an anatase crystallographic phase.