LiCoO2掺杂对锰酸锂结构和性能的影响

用固相反应合成了LiCoO2掺杂改性的LiMn2O4锂离子电池正极材料,优化了LiMn2O4的改性路径及制备条件.利用SEM、XRD对产物的结构进行了表征,并测试了产物的电化学性能.结果表明:所得产物均具有尖晶石型LiMn2O4结构.LiCoO2的掺入增加了尖晶石结构的稳定性,改善了尖晶石型LiMn2O4的充放电循环性能.     

锂离子电池LiMn2O4正极材料的高温改性

锂离子电池LiMn2O4正极材料的高温改性;锂离子电池;正极材料;尖晶石;LiMn2O4;包覆     

稀土元素掺杂对LiMn2O4正极材料改性的研究进展

尖晶石LiMn2O4作为高能锂离子二次电池的正极材料,其原料资源丰富、生产工艺简单、环境污染小、可回收利用,成为近年来人们研究的热点,被公认为最有潜力取代LiCoO2的正极材料之一.但是它的性能还不尽如人意,例如在循环及存放的过程中会出现容量衰减,高温情况下尤为严重.为了提高LiMn2O4正极材料的电化学性能,国内外研究者尝试了多种方法,例如元素掺杂、表面包覆、工艺改进等,其中掺杂金属元素已经被证明是最佳途径.结合作者所在实验室的工作,对稀土元素掺杂改变尖晶石LiMn2O4正极材料电化学性能的研究进行了综述.     

掺稀土的LiM0.02Mn1.98O4锂离子电池正极材料

自1991年Ohzuku[1] 、 Tarascon[2]等成功地将LiMn2O4用于锂离子电池正极以来, 人们对尖晶石LiMn2O4的电化学性质进行了广泛的研究[3]. 尖晶石LiMn2O4的一个缺点是充放电过程中, 特别在较高温度(如50 ℃)下, 其容量下降明显. Zhou等[4]详细研究了该过程, 发现造成容量下降的主要原因是充电状况下正极LiMn2O4的溶解, 由于Jahn-Taller效应生成不稳定的两相结构以及电解液的分解等. 为了提高LiMn2O4的充放电循环稳定性, 人们除了优化合成条件和溶液组分外, 主要采用添加少量掺杂元素(M), 部分替代LiMn2O4中的Mn, 制得LiMxMn2-xO4, 以抑制溶解和Jahn-Taller效应引起的结构变化.     

Al3+对尖晶石型LiMn2O4正极材料的表面掺杂包覆改性

采用表面掺杂包覆改性的方法对LiMn2O4尖晶石型锂离子电池正极材料进行改性.以Al为表面掺杂元素,Al(NO3)3为原料,研究了Al3+掺杂量为7.1%(原子分数)时不同温度(300、400、500、600、700、750、800℃)下的改性效果.研究发现,随着热处理温度的升高,改性样品的最大比容量先升高后降低,在700℃达到最大值;循环衰减先增大后降低再增大;这是由于随着热处理温度的升高,包覆层逐渐分解并与LiMn2O4颗粒反应固溶,在750℃完全固溶,衰减达到极小值,而后固溶层向颗粒内部扩散,导致包覆层对颗粒免受电解液溶解的保护能力变弱,因而容量衰减增大.其中700℃热处理5h的样品最大比容量为133.6mAh·g-1,循环50周衰减3.4%.研究表明Al3+表面掺杂包覆改性有利于促进LiMn2O4尖晶石型锂离子电池正极材料的商业化生产,具有大规模应用的前景.     

改性LiMn_2O_4的高温电化学性能

采用高温固相反应法制备改性的LiMn2O4锂离子电池正极材料.利用SEM、XRD等方法表征产物的结构特性.结果表明:所得产物均具尖晶石型LiMn2O4结构,该样品经Li2CO3改性后用作锂离子电池正极,于常温和高温下的循环性能均得到明显改善.     

Al掺杂尖晶石LiMn2O4正极材料的性能

尖晶石LiMn2O4作为锂离子电池正极可大电流放电,且成本低、环境友好.采用溶胶-凝胶法制备尖晶石LiMn2O4及Al掺杂材料.使用X-射线衍射(XRD)和扫描电子显微镜(SEM)观察材料结构与形貌.结果表明,复合材料颗粒尺寸300-500 nm,呈类球形.电化学恒流充放电测试表明,Al掺杂尖晶石LiMn2O4电极的循环性明显提高,Al掺杂5%LiMn2O4(by mass,下同)正极在1C倍率充放电100周期循环后的容量保持率为98.2%,1C倍率充电、5C倍率放电下,100周期循环后其容量保持率为99.0%,表现出较优的电化学循环性能.     

柠檬酸溶解废锂离子电池正极材料的研究

探求废锂离子电池正极材料LiMn2O4在柠檬酸溶液中的溶解条件,为废旧电池的进一步回收利用奠定基础。采用单因素与正交实验相结合的方法,对废锂离子电池正极材料LiMn2O4在柠檬酸溶液中的溶解条件进行研究,结果表明,废锂离子电池正极材料LiMn2O4在柠檬酸溶液中适宜的溶解条件为:柠檬酸浓度1.0mol.L-1、溶解温度45℃、H2O2加入量5.0%、料液比60g.L-1,在此条件下正极材料LiMn2O4在柠檬酸溶液中的溶解率达到99.56%。对柠檬酸溶解废锂离子电池正极材料LiMn2O4的机理进行了探讨,认为在加入H2O2之前,尖晶石LiMn2O4中的Mn3+发生歧化反应生成Mn2+以及MnO2,而Mn4+在溶液中水解生成MnO2。MnO2与柠檬酸发生氧化还原反应生成丙酮二羧酸及Mn2+。加入H2O2之后,H2O2作为还原剂能够将剩余的MnO2全部还原为Mn2+,使正极材料LiMn2O4在柠檬酸溶液中的溶解率得以提高。     

LiCoO2对LiMn2O4改性过程的研究

在LiCoO2、LiMn2O4、LiNiO2这三种锂离子电池正极材料中,尖晶石LiMn2O4由于具有价廉、对环境友好、使用安全的显著优点,被普遍认为是最有希望的新型正极材料。但该材料在高温下较快的容量衰减制约了其规模应用[1~3]。为改善LiMn2O4的高温性能,各国学者普遍采用掺杂法,即在制备L     

锂离子电池正极材料LiMn2-xCrxO4电化学性能的研究

针对尖晶石型LiMn2O4锂离子电池正极材料的容量衰减,提出了相应的抑制方法,所合成的LiMn2-xCrxO4(0相似文献   

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.