Solvent polarity and organic reactivity in mixed solvents: evidence using a reactive molecular probe to assess the role of preferential solvation in aqueous alcohols

Product selectivities [S = ([ester product]/[acid product]) x ([water]/[alcohol solvent])] are reported for solvolyses of p-methoxybenzoyl chloride (2) in aqueous methanol, ethanol, 2,2,2-trifluoroethanol, n-propyl alcohol, isopropyl alcohol, and tert-butyl alcohol at 25, 35, and 45 degrees C. S values are small and depend significantly on the alcohol cosolvent, varying from 1.3 in methanol to 0.1 in tert-butyl alcohol, but S depends only slightly on the solvent composition, and on the temperature. As S adjusts the product ratios for changes in bulk solvent compositions, it is suggested that preferential solvation by either alcohol or water at the reaction site is not a major factor influencing rates or products. Logarithms of rates of solvolyses of 2 correlate well with Kosower Z values (based on solvatochromism). In contrast, another solvatochromic polarity index, E(T)(30), shows "dispersion" in correlations with the solvent ionizing power parameter, Y(OTs), probably due to aromatic ring and other solvation effects.     

Rate and product studies with dimethyl phosphorochloridate and phosphorochloridothionate under solvolytic conditions

The specific rates of solvolysis of dimethyl phosphorochloridate and of dimethyl phosphorochloridothionate are very well correlated using the extended Grunwald-Winstein equation, with incorporation of the NT solvent nucleophilicity scale and the YCl solvent ionizing power scale. The sensitivity parameters (l and m) are similar to each other and also similar to previously recorded values for solvolyses of arenesulfonyl chlorides, which were proposed to follow a concerted displacement mechanism. For solvolyses in aqueous ethanol or aqueous methanol the product selectivities (S) are close to unity. For solvolyses in aqueous 2,2,2-trifluoroethanol, the values are too small to accurately measure, showing a very large preference for product formation involving nucleophilic attack by the water component. It is concluded that the chloride and chloridothionate solvolyses, in common with the solvolyses of arenesulfonyl chlorides, follow a concerted displacement mechanism.     

Mechanisms of solvolyses of acid chlorides and chloroformates. Chloroacetyl and phenylacetyl chloride as similarity models

[reaction: see text] Rate constants and product selectivities (S = ([ester product]/[acid product]) x ([water]/[alcohol solvent]) are reported for solvolyses of chloroacetyl chloride (3) at -10 degrees C and phenylacetyl chloride (4) at 0 degrees C in ethanol/ and methanol/water mixtures. Additional kinetic data are reported for solvolyses in acetone/water, 2,2,2-trifluoroethanol(TFE)/water, and TFE/ethanol mixtures. Selectivities and solvent effects for 3, including the kinetic solvent isotope effect (KSIE) of 2.18 for methanol, are similar to those for solvolyses of p-nitrobenzoyl chloride (1, Z = NO(2)); rate constants in acetone/water are consistent with a third-order mechanism, and rates and products in ethanol/ and methanol/water mixtures can be explained quantitatively by competing third-order mechanisms in which one molecule of solvent (alcohol or water) acts as a nucleophile and another acts as a general base (an addition/elimination reaction channel). Selectivities increase for 3 as water is added to alcohol. Solvent effects on rate constants for solvolyses of 3 are very similar to those of methyl chloroformate, but acetyl chloride shows a lower KSIE, and a higher sensitivity to solvent-ionizing power, explained by a change to an S(N)2/S(N)1 (ionization) reaction channel. Solvolyses of 4 undergo a change from the addition/elimination channel in ethanol to the ionization channel in aqueous ethanol (<80% v/v alcohol). The reasons for change in reaction channels are discussed in terms of the gas-phase stabilities of acylium ions, calculated using Gaussian 03 (HF/6-31G(d), B3LYP/6-31G(d), and B3LYP/6-311G(d,p) MO theory).     

Application of the NT solvent nucleophilicity scale to attack at phosphorus: solvolyses of N,N,N',N'-tetramethyldiamidophosphorochloridate

The specific rates of solvolysis of N,N,N',N'-tetramethyldiamidophosphorochloridate have been measured at 25.0 degrees C in 31 solvents. Analysis with the extended Grunwald-Winstein equation leads to sensitivities toward changes in solvent nucleophilicity (l) of 1.20 +/- 0.07 and toward changes in solvent ionizing power (m) of 0.69 +/- 0.04. The correlation is improved by omission of the four data points for 2,2,2-trifluoroethanol-ethanol mixtures (F-test value from 155 to 320) with very small reductions in both l and m values. Activation parameters are reported for eight of the solvolyses. The l and m values are very similar to those previously reported for solvolyses of several arenesulfonyl chlorides, consistent with a concerted substitution process. This assignment is supported by a large k(Cl)/k(F) ratio for hydrolysis and a corresponding ratio for hydroxide-assisted hydrolysis of 178. The stereochemistry of nucleophilic attack at tetracoordinate phosphorus(V) is discussed.     

Solvolyses of 2-Deoxy-alpha- and beta-D-Glucopyranosyl 4'-Bromoisoquinolinium Tetrafluoroborates

The solvolyses of 2-deoxy-alpha- and beta-D-glucopyranosyl 4'-bromoisoquinolinium tetrafluoroborates (1 and 2) were monitored in aqueous methanol, ethanol, trifluoroethanol, and binary mixtures of ethanol and trifluoroethanol. The observed rate constants are consistent with the solvolyses of 1 and 2 proceeding via dissociative (D(N) A(N)) transition states. In comparison to the alpha-anomer, solvolysis of the beta-compound gives a greater transition state charge delocalization onto the ring oxygen atom. Analysis of the solvolysis product ratios indicates that the 2-deoxyglucosyl oxacarbenium ion is not solvent-equilibrated in the solvent mixtures studied. In the solvolysis of compound 1, the solvent trifluoroethanol facilitates diffusional separation of the leaving group and, in so doing, promotes the formation of the retained trifluoroethyl glycoside.     

Structural effects on the solvolytic reactivity of carboxylic and sulfonic acid chlorides. Comparisons with gas-phase data for cation formation

Kinetic data for solvolyses of 28 acid chlorides in 97% w/w trifluoroethanol (TFE)-water spanning over 10 (9) in rate constant at 25 degrees C are obtained directly or by short extrapolation from published values. G3 calculations of the energy required for cation formation in the gas phase are validated from proton affinities and from other experimental data. G3 calculations of heterolytic bond dissociation enthalpies (HBDEs) for formation of cations from acid chlorides in the gas phase show the following trends when compared with the solvolysis rate constants: (i) electron-rich sulfonyl chlorides and most carboxylic acid chlorides, including thione derivatives, give a satisfactory linear correlation with a significant negative slope; (ii) most sulfonyl chlorides and some chloroformates and thio derivatives have higher HBDEs and fit another correlation with a small, negative slope. A significant deviation is observed for the acyl series (RCOCl), for which both solvolysis rates and HBDEs increase in the order R = Bu ( t ) < Pr ( i ) < Et < Me. The deviation may be explained either by a prior hydration mechanism or preferably by electrostatic effects on the formation of small cations. The above results of structural effects support independent evidence from solvent effects that cationic ionization reaction pathways (with nucleophilic solvent assistance or S N2 character) are involved in the solvolyses of acid chlorides.     

Rate and product studies in the solvolyses of N,N-dimethylsulfamoyl and 2-propanesulfonyl chlorides

Contrary to earlier suggestions of an S(N)1 pathway for solvolyses of N,N-dimethylsulfamoyl chloride (1), an extended Grunwald-Winstein equation treatment of the specific rates of solvolysis in 32 solvents shows an appreciable sensitivity towards changes in both solvent nucleophilicity and solvent ionizing power. The actual values are very similar to those obtained in earlier studies of the solvolyses of sulfonyl and phosphoryl chlorides, solvolyses which are believed to proceed by an S(N)2 pathway. The observation of similar selectivities in aqueous-alcohol solvents further supports this assignment. In a recent report, an addition-elimination (association-dissociation) pathway was proposed for solvolyses of 2-propanesulfonyl chloride (2). A severe multicollinearity problem has been removed by the addition of several specific rates of solvolysis in fluoroalcohol-containing solvents. The new analyses using the extended Grunwald-Winstein equation lead to sensitivities similar to those for and the previously studied related compounds, and these solvolyses are also best described as following an S(N)2 pathway.     

Use of the Simple and Extended Grunwald-Winstein Equations in the Correlation of the Rates of Solvolysis of Highly Hindered Tertiary Alkyl Derivatives

The original Grunwald-Winstein equation (1948) involved the development of a scale of solvent ionizing power (Y). Subsequent work has refined this scale and involved the development of scales of solvent nucleophilicity (N) and a term to correct for deviations when aromatic rings are present, governed by the aromatic ring parameter (I). These three scales, and the sensitivities towards each, can be related to specific rates of solvolysis through linear free energy relationships (LFERs).One important area of application of LFERs has been to the solvolyses of tert-alkyl halides. It has been proposed that the solvolysis of tert-butyl chloride involves a nucleophilic component, although other workers have suggested that the effects observed are related to electrophilic not nucleophilic influences. Takeuchi (1997) studied a compound with two of the methyl groups of tert-butyl chloride replaced by neopentyl groups. For this highly-hindered substrate there was no evidence for nucleophilic participation. Liu (1998) and Takeuchi (2001) have reported concerning the solvolyses of additional significantly-hindered tertiary alkyl chlorides. Liu (2009) has presented a parallel study of bromides. Martins (2008) has considered hindered tertiary alkyl halides, mainly with carbon-carbon multiple bonds as substituents. It was proposed that the hI term was of importance, with the sensitivities (h) sometimes positive and sometimes negative. To explain negative values, it was suggested that the I scale might contain a nucleophilicity component. In this review, we bring together, with analysis and commentary, the work of Takeuchi, Liu, Martins and others concerning the solvolyses of tertiary alkyl halides, with emphasis on the relevance of the three scales that have been developed for use in Grunwald-Winstein correlations.     

Rate and product studies with benzyl and p-nitrobenzyl chloroformates under solvolytic conditions

The specific rates of solvolysis of p-nitrobenzyl chloroformate are well correlated using the extended Grunwald-Winstein equation, with a high sensitivity (l) to changes in solvent nucleophilicity (N(T)) and a moderate sensitivity (m) to changes in solvent ionizing power (Y(Cl)). The values are consistent with a rate-determining association within an association-dissociation pathway. The selectivity values (S) for the attack at the acyl carbon show a modest preference for ethanol over water and a relatively high preference for ethanol over 2,2,2-trifluoroethanol (TFE). The solvolyses of benzyl chloroformate show similar characteristics in solvents of relatively high nucleophilicity and/or low ionizing power. In solvents with considerable fluoro alcohol content, an ionization mechanism, accompanied by loss of carbon dioxide, leads to benzyl chloride, benzyl alcohol, and benzyl alkyl ether. A new correlation now applies, with a much lower l value and somewhat higher m value. The S values for this pathway are close to unity, even in TFE-ethanol mixtures, consistent with the components of the binary solvent capturing a highly reactive carbocation.     

Syntheses of 5‐(3‐Arylsydnon‐4‐yl)Tetrazole Derivatives

3‐Arylsydnone‐4‐carbohydroximic acid chlorides ( 1 ) could react with sodium azide to produce the corresponding 3‐arylsydnone‐4‐carbazidoximes ( 2 ), but not 1‐hydroxytetrazoles 3 . Treatment of 3‐arylsydnone‐4‐carbazidoximes ( 2 ) with acid chlorides such as acetyl chloride ( 4a ), propionyl chloride ( 4b ) and benzoyl chloride ( 4c ) in the presence of excess triethylamine generated the derivatives of the azidoximes 5 . To obtain the desired tetrazoles, the azidoximes 2 should first cyclize directly with acetyl chloride ( 4a ) or propionyl chloride ( 4b ) to afford the acetyl or propionyl derivatives 6 . The cyclized tetrazole derivatives 6 underwent deacylation upon heating in ethanol to give 1‐hydroxy‐5‐(3‐arylsydnon‐4‐yl)tetrazoles ( 3 ).     

Is the tert-butyl chloride solvolysis the most misunderstood reaction in organic chemistry? Evidence against nucleophilic solvent participation in the tert-butyl chloride transition state and for increased hydrogen bond donation to the 1-adamantyl chloride solvolysis transition state.

Despite theoretical calculations to the contrary, it has been argued that the 1-adamantyl cation is more stable than the tert-butyl cation in media of high dielectric constant. This argument has been utilized to suggest that the higher rate of solvolysis of tert-butyl chloride in aqueous ethanol is evidence for nucleophilic solvent participation in this classic reaction. Further, in "more highly ionizing" solvents, the rate of 1-adamantyl chloride is nearly the same as that of tert-butyl chloride, which is interpreted as a manifestation of the relative stabilities of the cations. However, the evidence cited does not explain the increased sensitivity of the rate of solvolysis of 1-adamantyl chloride over tert-butyl chloride to solvents which are better able to donate hydrogen bonds. The hypothesis developed here is that 1-adamantyl chloride solvolysis is assisted by hydrogen bond donation departing chloride ion to a greater extent than that of tert-butyl chloride solvolysis, most likely due to lessened steric interactions in a developing pyramidal cation. This hypothesis is supported by multiparameter solvent effect factor analyses utilizing the KOMPH2 equation which, in addition, quantifies the important role of ground-state destabilization due to strong solvent-solvent interactions. An important result from the good correlation of free energies of transfer of the tert-butyl chloride solvolysis transition state is that there is no change in mechanism, and, in particular, no nucleophilic participation even in non-hydroxylic basic solvents. The equation is also applied to the case of dimethylsulfonium ion solvolyses where the tert-butyl salt reacts substantially faster than the 1-adamantyl salt in ethanol and the gas phase. The decreased rate of the former in hydrogen bond donating solvents relative to the gas phase is as yet unclear. Solvent N values that were generated to characterize solvent nucleophilicity are shown not to be correlated by measures of solvent basicity but rather by the negative of measures of solvent hydrogen bond donor ability.     

Nucleophilic Participation in the Solvolyses of (Arylthio)methyl Chlorides and Derivatives: Application of Simple and Extended Forms of the Grunwald-Winstein Equations

The specific rates of solvolysis of chloromethyl phenyl sulfide [(phenylthio)methyl chloride] and its p-chloro-derivative have been determined at 0.0 °C in a wide range of hydroxylic solvents, including several containing a fluroalcohol. Treatment in terms of a two-term Grunwald-Winstein equation, incorporating terms based on solvent ionizing power (Y(Cl)) and solvent nucleophilicity (N(T)) suggest a mechanism similar to that for the solvolyses of tert-butyl chloride, involving in the rate-determining step a nucleophilic solvation of the incipient carbocation in an ionization process. A previous suggestion, that a third-term governed by the aromatic ring parameter (I) is required, is shown both for the new and for the previously studied related substrates to be an artifact, resulting from an appreciable degree of multicollinearity between I values and a linear combination of N(T) and Y(Cl) values.     

Solvolysis of 4-methylcyclohexylidenemethyliodonium salt: chirality probe approach to a primary vinyl cation intermediate

Optically active 4-methylcyclohexylidenemethyl(aryl)iodonium tetrafluoroborate (1.BF(4)(-)) was prepared and its solvolysis was carried out at 60 degrees C in various solvents. The main product is optically active 4-methylcycloheptanone (or its enol derivative) in unbuffered solvents, accompanied by the iodoarene. The rearranged product always maintains the optical purity of the starting 1. Its stereochemistry conforms to a mechanism involving the rearrangement via the sigma-bond participation in departure of the nucleofuge, followed by trapping of the resulting chiral 5-methylcyclohept-1-enyl cation with a nucleophilic solvent. That is, the achiral, primary vinyl cation is not involved during the reaction. The unrearranged substitution product is also obtained in a minor fraction in unbuffered methanol, ethanol, and acetic acid, but not in trifluoroethanol or hexafluoro-2-propanol: the methoxy product from methanolysis is largely racemized, but the acetolysis product is obtained mainly via retention of configuration. Reactions of 1 with bromide, acetate, and trifluoroacetate in chloroform give unrearranged substitution products in different degrees of inversion. These unrearranged products are concluded to be formed via the direct nucleophilic substitutions. Added bases such as sodium acetate in methanol lead to the unrearranged methoxy products of complete racemization, which is ascribed to the alpha elimination (to give an alkylidenecarbene) followed by the solvent insertion.     

Formamides as Lewis Base Catalysts in SN Reactions—Efficient Transformation of Alcohols into Chlorides,Amines, and Ethers

A simple formamide catalyst facilitates the efficient transformation of alcohols into alkyl chlorides with benzoyl chloride as the sole reagent. These nucleophilic substitutions proceed through iminium‐activated alcohols as intermediates. The novel method, which can be even performed under solvent‐free conditions, is distinguished by an excellent functional group tolerance, scalability (>100 g) and waste‐balance (E‐factor down to 2). Chiral substrates are converted with excellent levels of stereochemical inversion (99 %→≥95 % ee). In a practical one‐pot procedure, the primary formed chlorides can be further transformed into amines, azides, ethers, sulfides, and nitriles. The value of the method was demonstrated in straightforward syntheses of the drugs rac‐Clopidogrel and S‐Fendiline.     

Synthesis of some N-[pyridyl(phenyl)carbonylamino]-alkyl-1,2,3,6-tetrahydropyridines

Alkyl substituted 2,4-dinitrophenylpyridinium chlorides 3 are formed by the nucleophilic substitution of 1-chloro-2,4-dinitrobenzene with alkyl pyridines. Reaction of pyridyl acid hydrazides or benzoyl hydrazides 4 with the pyridinium chlorides 3 furnish the isolable 2,4-dinitroanilino derivatives 5 which undergo hydrolysis when refluxed in water:p-dioxane mixture (1:4 v/v) to yield the pyridinium ylides 6 . Sodium borohydride reduction of 6 in absolute ethanol at 0° for 4 hours result the formation of the title compounds 7 in moderate to excellent yields.     

Computational studies of nucleophilic substitution at carbonyl carbon: the S(N)2 mechanism versus the tetrahedral intermediate in organic synthesis

A theoretical study specifically addresses the question of whether nucleophilic addition to the carbonyl groups of acid chlorides, esters, and anhydrides involves an addition-elimination pathway or proceeds by a concerted S(N)2-like mechanism in the absence of the generally assumed tetrahedral intermediate. Density functional calculations [B3LYP/6-31+G(d,p)] establish that chloride ion exchange reactions with both formyl and acetyl chloride proceed by a pi attack on the C=O bond. No discernible tetrahedral intermediate typical of an addition-elimination pathway was found in either case. While a tetrahedral intermediate does exist for the addition of fluoride ion to (Cl)(2)C=O, halide exchange of LiCl with both ClFC=O and (Cl)(2)C=O also proceeds by a concerted S(N)2-like pathway. The formation of a tetrahedral intermediate from the addition of methanol to acetyl chloride is slightly exothermic (4.4 kcal/mol). The ion-dipole complex of methanol weakly bonded to the carbonyl carbon of protonated acetyl chloride is stabilized by 13.8 kcal/mol but does not collapse to a tetrahedral intermediate. When four CH(3)OH molecules are H-bonded to protonated acetyl chloride, a tetrahedral intermediate is not completely formed and this solvated complex more closely resembles the precursor to an S(N)1-type ionization of Cl(-). With six H-bonding methanol molecules, a methanol adds to the carbonyl carbon and a proton relay occurs with formation of a tetrahedral-like structure that immediately loses chloride ion in an S(N)1-like solvolysis. These results corroborate earlier suggestions (Bentley et al. J. Org. Chem. 1996, 61, 7927) that the methanolysis of acetyl chloride does not proceed through the generally assumed addition-elimination pathway with a discrete tetrahedral intermediate but is consistent with ionization of Cl(-). The reaction of methoxide ion with methyl acetate proceeds via a multiple-well energy surface and involves the intermediacy of an asymmetrical species with differing C-OMe bond lengths. Models of synthetic applications of acyl transfer reactions involving anhydrides that form N-acyloxazolidinones also proceed by a concerted S(N)2-type pathway even with the carboxylate leaving group. Concerted transition states were observed for the reactions of each enantiomer of a 1,3-diphenylcycloprop-2-ene carboxylic anhydride by S-3-lithio-4-phenyloxazolidinone. Despite close structural similarities between the diastereomeric transition states, the relative energies correlated closely with the experimental results.     

Correlation of the rates of solvolysis of benzoyl fluoride and a consideration of leaving-group effects

The specific rates of solvolysis of benzoyl fluoride have been determined at 25.0 degrees C in 37 pure and binary solvents. Together with seven values from the literature, these give a satisfactory correlation over the full range of solvents when the extended Grunwald-Winstein equation is applied. The sensitivities to changes in solvent nucleophilicity and solvent ionizing power are very similar to those for octyl fluoroformate, suggesting that the addition step of an addition-elimination mechanism is rate determining. In the solvent-composition region where benzoyl chloride also shows bimolecular solvolysis, the appreciable k(Cl)/k(F) values are proposed as being primarily due to a more efficient ground-state stabilization for the fluoride.     

Electrochemical carboxylation of acyl chlorides, freons, and halogen-containing polymers

Processes of the carbon dioxide fixation are studied. The fixation is done by an electrochemical carboxylation of chlorides of aliphatic and aromatic carboxylic acids (acetyl chloride, benzoyl chloride and its derivatives), halogen-containing polymers (polyvinyl chloride, polyvinyl bromide), polybutadiene, and polyfluoroalkyl halides (CF₃Br, CF₃I, C₃F₇I). Major effects of some factors (reagent electronic structure, electrode materials, supporting electrolyte) on the occurrence of such processes and the yield of target products are studied.     

尿中3种苯氧羧酸类除草剂的气相色谱分析法

本文研究了2,4-滴、2,4-滴丙酸和2甲4氯3种苯氧羧酸类除草剂用硫酸、三氯化硼、氯化氢和三氟乙酸等4种催化剂的甲醇、乙醇、丙醇、丁醇、戊醇、苯甲醇、三氟乙醇、五氟丙醇、二氯丙醇和五氟苯甲醇等10种醇的酯化衍生反应条件,在此基础上建立了尿中3种苯氧羧酸类除草剂的各种衍生化气相色谱电子俘获检测方法,其中较灵敏的方法2,4-滴和2,4-滴丙酸的检出限低于10 ng/mL,2甲4氯的检出限低于20ng/mL,适于职业接触者和中毒者的尿分析。     

Solvent nucleophilicity

The rates of the reactions of benzhydrylium ions (diarylcarbenium ions) with solvent mixtures of variable composition (water/acetonitrile, methanol/acetonitrile, ethanol/acetonitrile, ethanol/water, and trifluoroethanol/water) have been determined photometrically by conventional UV-vis spectroscopy, stopped-flow methods, and laser flash techniques. It has been shown that the first-order rate constants follow the previously published relationship log k(20 degrees C) = s(N + E), where E is an empirical electrophilicity parameter, N is an empirical nucleophilicity parameter, and s is a nucleophile-specific slope parameter. From plots of log k versus E of the benzhydrylium ions are derived the solvent nucleophilicity parameters s and N, the latter of which are designated as N1 to emphasize that their use in the quoted correlation equation gives rise to first-order rate constants. A linear correlation between N1 and Kevill's solvent nucleophilicity NT based on S-methyldibenzothiophenium ions is reported, which allows one to interconvert the two sets of data. Because the N1 values are directly comparable to the previously reported nucleophilicity parameters N for pi-systems (www.cup.uni-muenchen.de/oc/mayr/), the systematic design of Friedel-Crafts reactions with solvolytically generated carbocations becomes possible.