Design and Stereoselective Synthesis of ProM‐2: A Spirocyclic Diproline Mimetic with Polyproline Type II (PPII) Helix Conformation

With the aim of developing polyproline type II helix (PPII) secondary‐structure mimetics for the modulation of prolin‐rich‐mediated protein–protein interactions, the novel diproline mimetic ProM‐2 was designed by bridging the two pyrrolidine rings of a diproline (Pro–Pro) unit through a Z‐vinylidene moiety. This scaffold, which closely resembles a section of a PPII helix, was then stereoselectively synthesized by exploiting a ruthenium‐catalyzed ring‐closing metathesis (RCM) as a late key step. The required vinylproline building blocks, that is, (R)‐N‐Boc‐2‐vinylproline (Boc=tert‐butyloxycarbonyl) and (S,S)‐5‐vinylproline‐tert‐butyl ester, were prepared on a gram scale as pure stereoisomers. The difficult peptide coupling of the sterically demanding building blocks was achieved in good yield and without epimerization by using 2‐(1H‐7‐azabenzotriazol‐1‐yl)‐1,1,3,3‐tetramethyluronium hexafluorophosphate (HATU)/N,N‐diisopropylethylamine (DIPEA). The RCM proceeded smoothly in the presence of the Grubbs II catalyst. Stereostructural assignments for several intermediates were secured by X‐ray crystallography. As a proof of concept, it was shown that certain peptides containing ProM‐2 exhibited improved (canonical) binding towards the Ena/VASP homology 1 (EVH1) domain as a relevant protein interaction target.     

A new cyclic borazine species B(8)(NH)(4)(NMe(2))(8) containing a twelve-membered B(8)N(4) ring

The reaction between B(2)(NMe(2))(4) and two equivalents of [NH(4)][PF(6)] in thf at room temperature affords the new cyclic borazine B(8)(NH)(4)(NMe(2))(8) containing a non-planar twelve-membered ring with alternating B(2)(NMe(2))(2) and NH units.     

Spectroelectrochemical studies on mixed-valence states in a cyanide-bridged molecular square, [Ru(II)(2)Fe(II)(2)(mu-CN)(4)(bpy)(8)](PF6)(4).CHCl(3).H(2)O

A cyanide-bridged molecular square of [Ru(II) (2)Fe(II) (2)(mu-CN)(4)(bpy)(8)](PF(6))(4).CHCl(3).H(2)O, abbreviated as [Ru(II) (2)Fe(II) (2)](PF(6))(4), has been synthesised and electrochemically generated mixed-valence states have been studied by spectroelectrochemical methods. The complex cation of [Ru(II) (2)Fe(II) (2)](4+) is nearly a square and is composed of alternate Ru(II) and Fe(II) ions bridged by four cyanide ions. The cyclic voltammogram (CV) of [Ru(II) (2)Fe(II) (2)](PF(6))(4) in acetonitrile showed four quasireversible waves at 0.69, 0.94, 1.42 and 1.70 V (vs. SSCE), which correspond to the four one-electron redox processes of [Ru(II) (2)Fe(II) (2)](4+) right arrow over left arrow [Ru(II) (2)Fe(II)Fe(III)] (5+) right arrow over left arrow [Ru(II) (2)Fe(III) (2)](6+) right arrow over left arrow [Ru(II)Ru(III)Fe(III) (2)](7+) right arrow over left arrow [Ru(III) (2)Fe(III) (2)](8+). Electrochemically generated [Ru(II) (2)Fe(II)Fe(III)](5+) and [Ru(II) (2)Fe(III) (2)](6+) showed new absorption bands at 2350 nm (epsilon =5500 M(-1) cm(-1)) and 1560 nm (epsilon =10 500 M(-1) cm(-1)), respectively, which were assigned to the intramolecular IT (intervalence transfer) bands from Fe(II) to Fe(III) and from Ru(II) to Fe(III) ions, respectively. The electronic interaction matrix elements (H(AB)) and the degrees of electronic delocalisation (alpha(2)) were estimated to be 1090 cm(-1) and 0.065 for the [Ru(II) (2)Fe(II)Fe(III) (2)](5+) state and 1990 cm(-1) and 0.065 for the [Ru(II) (2)Fe(III) (2)](6+) states.     

Microwave‐Assisted Synthesis and Transformations of Cationic CpRu(II)(naphthalene) and CpRu(II)(naphthoquinone) Complexes

Details of the direct synthesis of cationic Ru(II)(η⁵‐Cp)(η⁶‐arene) complexes from ruthenocene using microwave heating are reported. Developed for the important catalyst precursor [Ru(II)(η⁵‐Cp)(η⁶‐1‐4,4a,8a‐naphthalene)][PF₆] reaction time could be shortened from three days to 15 min. The method was extended to [Ru(II)(η⁶‐benzene)(η⁵‐Cp)][PF₆], [Ru(II)(η⁵‐Cp)(η⁶‐toluene)][PF₆], [Ru(II)(η⁵‐Cp)(η⁶‐mesitylene)][PF₆], [Ru(II)(η⁵‐Cp)(η⁶‐hexamethylbenzene)][PF₆], [Ru(II)(η⁵Cp)(η⁶‐indane)][PF₆], [Ru(II)(η⁵‐Cp)(η⁶‐2,6‐dimethylnaphthalene)][PF₆], and [Ru(II)(η⁵‐Cp)(η⁶‐pyrene)][PF₆]. 1‐methylnaphthalene and 2,3‐dimethylnaphthalene afforded mixtures of regioisomeric complexes. [Ru(Cp)(CH₃CN)₃][PF₆], derived from the naphthalene precursor provided access to the cationic RuCp complexes of naphthoquinone, tetralindione, 1,4‐dihydroxynaphthalene, and 1,4‐dimethoxynaphthalene. Reduction of the tetralindione complex afforded selectively the endo,endo diol derivative. X‐Ray structures of five complexes are reported.     

Unprecedented gold-tellurolate clusters [Au(8)(mu-TeR)(8)(PR'(3))(4)

The reaction of [AuCl(PR'3)] with KTeR, prepared from RTeTeR and K-selectride, gives the gold-tellurolate clusters [Au8(mu-TeR)8(PR'3)4] (R = Ph, Tol; PR'3 = PPh3, PPh2py) in high yield. This result contrasts with the one obtained from the reaction with thiolates or selenolates, from which mononuclear complexes are synthesized. The structures of these species have been determined and consist on three layers of gold and tellurium atoms in the ratio Au3Te2:Au2Te4:Au3Te2. There are short gold...gold interactions ranging from 2.9463(7) to 3.31132(7) A, and the clusters are composed of di- and tri-coordinated gold centers. The result is unprecedented in gold-chalcogenolate chemistry from which mononuclear species are expected and represents one of the few examples of gold-tellurolate derivatives. These species show an interesting luminescent behavior in the solid state (at 77 K) and in solution (both at 298 and 77 K).     

Structure and magnetism of the tetra-copper(II)-substituted heteropolyanion [Cu(4)K(2)(H(2)O)(8)(alpha-AsW(9)O(33))(2)](8-)

The novel heteropolyanion [Cu(4)K(2)(H(2)O)(8)(alpha-AsW(9)O(33))(2)](8)(-) (1) has been synthesized and characterized by IR spectroscopy, elemental analysis, and magnetic studies. Single-crystal X-ray analysis was carried out on [K(7)Na[Cu(4)K(2)(H(2)O)(6)(alpha-AsW(9)O(33))(2)].5.5H(2)O](n)(K(7)Na-1), which crystallizes in the tetragonal system, space group P42(1)m, with a = 16.705(4) A, b = 16.705(4) A, c = 13.956(5) A, and Z = 2. Interaction of the lacunary [alpha-AsW(9)O(33)](9)(-) with Cu(2+) ions in neutral, aqueous medium leads to the formation of the dimeric polyoxoanion 1 in high yield. Polyanion 1 consists of two alpha-AsW(9)O(33) units joined by a cyclic arrangement of four Cu(2+) and two K(+) ions, resulting in a structure with C(2)(v)() symmetry. All copper ions have one terminal water molecule, resulting in square-pyramidal coordination geometry. Three of the copper ions are adjacent to each other and connected via two micro(3)-oxo bridges. EPR studies on K(7)Na-1 and also on Na(9)[Cu(3)Na(3)(H(2)O)(9)(alpha-AsW(9)O(33))(2)].26H(2)O (Na(9)-2) over 2-300 K yielded g values that are consistent with a square-pyramidal coordination around the copper(II) ions in 1 and 2. No hyperfine structure was observed due to the presence of strong spin exchange, but fine structure was observed for the excited (S(T) = 3/2) state of Na(9)-2 and the ground state (S(T) = 1) of K(7)Na-1. The zero-field (D) parameters have also been determined for these states, constituting a rare case wherein one observes EPR from both the ground and the excited states. Magnetic susceptibility data show that Na(9)-2 has antiferromagnetically coupled Cu(2+) ions, with J = -1.36 +/- 0.01 cm(-)(1), while K(7)Na-1 has both ferromagnetically and antiferromagnetically coupled Cu(2+) ions (J(1) = 2.78 +/- 0.13 cm(-)(1), J(2) = -1.35 +/- 0.02 cm(-)(1), and J(3) = -2.24 +/- 0.06 cm(-)(1)), and the ground-state total spins are S(T) = 1/2 in Na(9)-2 and S(T) = 1 in K(7)Na-1.     

Synthesis,Structural Characterization and Reactivity of a Bis(phosphine)(silyl) Platinum(II) Complex

Treatment of 1,2‐C₆H₄(SiH₃)(SiH₃) ( 1 ) with Pt(dmpe)(PEt₃)₂ (dmpe=Me₂PCH₂CH₂PMe₂) in the ratio of 1:1 leads to the complex {1,2‐C₆H₄(SiH₂)(SiH₂)}Pt^II (dmpe) ( 2 ), which can react with proton organic reagent bearing hydroxy group with low steric hindrance to form a tetra‐alkoxy substituted silyl platinum(II) compound ( 3 ). Compounds 2 and 3 are the very rare examples of silyl transition‐metal complexes derived from this chelating hydrosilane ligand. To the best of our knowledge, there are only 6 examples of silyl metal complexes prepared from this ligand with such structural features registered in the Cambridge Structural Database, among them, only one silyl platinum(II) compound is presented. The structures of complexes 2 and 3 were unambiguously determined by multinuclear NMR spectroscopic studies and single crystal X‐ray analysis.     

Synthesis of a Trisaccharide Repeating Unit Related to Arabinogalactan-Protein (AGP) Polysaccharides 1

Abstract

Starting from L-arabinose and methyl β-D-galactopyranoside, methyl 2,3,4-tri-O-benzyl-6-O-[2,4,6-tri-O-benzoyl-3-O-(23,5-tri-O-benzoyl-α-L-arabinofuranosyl)-β-D-galactopyranosyl]-β-D-galactopyranoside 10 has been synthesized. Removal of protecting groups gave the methyl glycoside 12 of a trisaccharide representative of a repeating unit of arabinogalactan (AGP) polysaccharides.

     

Synthesis and Crystal Structure of [Ni(II)(L)(py)_3]·(py)

1 INTRODUCTION Schiff bases and their metal complexes are useful reagents in organic synthesis[1], and they have exhi- bited some biological activities as anticancer and antitumor drugs[2]. The crystal structures and physi- cal and chemical properties of many Schiff bases and their transition metals complexes have been re- ported[3~5]. Further interest in the coordination che- mistry of nickel(II) arises from the role of these complexes in several catalytic reactions, such as electrocat…     

[双-(N-苯基水杨醛亚胺)](二氮杂菲)合钴(II)的合成与结构

Bis(N-Phenylsalicylaldiminato)(1,10-Phenanthroline) Co(Ⅱ), C38H28N4O2Co,was synthesized and its crystal structure as been determined by X-ray diffraction method. The crystallographic data are as follows: monoclinic, space group C2/c, α=21.402(7), b=10.060(2), c=14.830(4)Å. β=109.19(2)°, V=3015.8 Å3, Z=4, M=631.57, Dc=1.39g•cm-3, μ=6.35cm-1, F(000)=1308, R=0.061, Rw=1.065. Two N and two O atoms from two bidentate ligands (L), other two N atoms from phen molecule coordinate the central Co(Ⅱ) ion forming octahedral configuration. Co-O, Co-N and Co-N(Phen) bond lengths are 1.995(5), 2.147(5) and 2.224(6) Å, respectively.     

Synthesis and crystal structure of BIS(DI-n-Butyldithiocarbamato)(1,10-Phenanthroline)cadmium(II)

A new mixed-ligand complex, Cd(S₂CN(C₄H₉)₂)₂ Phen, is synthesized and investigated by thermal, element, and IR analyses and by diffractometry of polycrystals (DRON-3M, CuK_α radiation, Ni filter). The crystal structure was determined on a CAD-4 Enraf-Nonius automatic diffractometer (MoK_α radiation, θ from 1.5 to 25°, 2325 nonzero independent reflections, 190 refined parameters, R = 0.036 for I > 2σ(I)). Crystal data for C₃₀H₄₄CdN₄S₄: a = 15.592(3), b = 22.724(5), c = 9.922(2) Å, space group Pbcn, V = 3515.5(12) ų, Z = 4, M= 701.33, d_calc = 1.325 g/cm³. The structure involves monomeric molecules in which the cadmium atom has a distorted octahedral environment.     

Synthesis and Conformation of (5R,8R,10R)-8-(Methylthiomethyl)ergoline-6-carboxamidine

The title compound 7 and two related novel ergolines have been synthesised from (5R,8R,10R)-8-(methyl-thiomethyl)ergoline-6-carbonitrile ( 4 ). The guanidine function of 7 induces a boat conformation of ergoline-ring D, as demonstrated by a careful NMR spectroscopic analysis of 7 and its N-hydroxy congener 6 . Diphenylphosphinodithioic acid has been used to convert the cyanamide function of 4 into the thiourea function at (5R,8R,10R)-8-(methylthiomethyl)ergoline-6-thiocarboxamide ( 5 ).     

Pressure-Induced Transition from an Antiferromagnet to a Ferrimagnet for Mn(II)(TCNE)[C(4)(CN)(8)](1/2) (TCNE = Tetracyanoethylene)

Mn(II)(TCNE)[C(4)(CN)(8)](1/2) (TCNE = tetracyanoethylene) exhibits a reversible pressure-induced piezomagnetic transition from a low magnetization antiferromagnetic state to a high magnetization ferrimagnetic state above 0.50 ± 0.15 kbar. In the ferrimagnetic state, the critical temperature, T(c), increases with increasing hydrostatic pressure and is ～97 K at 12.6 kbar, the magnetization increases by 3 orders of magnitude (1000-fold), and the material becomes a hard magnet with a significant remnant magnetization.     

Synthesis of the arachno-4-CB(8)H(12)(2)(-) monocarbaborane dianion and NMR/computational studies of the fluxional processes observed in the isoelectronic nine-vertex arachno anions: arachno-4-CB(8)H(12)(2)(-), arachno-4-CB(8)H(13)(-), and arachno-4-SB(8)H(11)(-)

The new monocarbaborane dianion, arachno-4-CB(8)H(12)(2)(-) has been synthesized from the reaction of arachno-4-CB(8)H(14) with 2 equiv of NaH in polar solvents. DFT/GIAO computations at the B3LYP/6-311G//B3LYP/6-311G level, in conjunction with 1D and 2D NMR spectroscopic studies, have confirmed that the dianion results from deprotonation of both the endo-CH and one bridging hydrogen of the parent arachno-4-CB(8)H(14). While the DFT calculations indicate that a C(1) symmetric structure is lowest in energy, the experimental solution NMR data are consistent with the dianion having a C(s)() symmetric structure, thus suggesting that it is fluxional in solution. Transition state calculations located a low-energy pathway with an activation energy of only 2.7 kcal/mol that allows the migration of the bridging hydrogen between the two enantiomeric forms of the dianion. The process can occur by a single-step, simple rotation through a transition state structure containing a -BH(2) group at the B7 boron. Averaging the calculated (11)B NMR chemical shifts of the resonances for those atoms in the static enantiomeric structures that become equivalent by this fluxional process then gives excellent agreement with the solution NMR data. Transition state calculations of the fluxional behavior previously observed for the isoelectronic arachno-4-CB(8)H(13)(-) and arachno-4-SB(8)H(11)(-) monoanions have likewise revealed related low-energy (0.3 and 5.0 kcal/mol, respectively) rearrangement mechanisms involving the simultaneous rotation of three hydrogens (two bridging and one -BH(2)) through a C(s)() symmetry transition state containing three -BH(2) groups.     

Synthesis and crystal structure of a phosphite nickel(II) 8-mercaptoquinoline complex

A monomeric trimethylphosphite nickel(II) complex of 8-mercaptoquinoline (Hmtq), [Ni(mtq)P(OMe)3]Cl, was synthesised and characterised by X-crystallography, FAB-MS and cyclic voltammogram measurements. The nickel(II) atom is co-ordinated via the S and N atoms of the mtq– entity, one P(OMe)3 ligand and one Cl– anion in a square-planar geometry. Two types of main fragment ions were observed in the FAB mass spectrum of the title complex: Cl– followed by P(OMe)3. The electrochemical behaviour of the title complex in MeCN solution with n-Bu4NBF4 (0.1molL–1) as electrolyte on the Pt electrode indicates that the reversible redox reaction [Ni(mtq)P(OMe)3]+ + e [Ni(mtq)P(OMe)]0 has occured in MeCN.