介孔量对梯级孔丝光沸石催化二甲醚羰基化反应性能的影响（英文）

本研究通过调整聚乙二醇(PEG 1450)的添加量制备了介孔量不同的梯级孔丝光沸石,并分别对其结构和二甲醚羰基化反应性能进行了表征和评价。结果表明,通过提高PEG 1450加入量的方式可以提高丝光沸石的介孔量,但PEG 1450的添加量过高时不利于介孔的形成。当引入的介孔量适宜时丝光沸石能够保持原有的结构,强酸中心数量增多、弱酸和中强酸数量降低,二甲醚的传质效率和二甲醚羰化反应催化性能明显提高。受传质过程和酸分布的影响,梯级孔丝光沸石催化剂上二甲醚羰化反应活性明显改善,二甲醚转化率升高、单程寿命延长,重积炭的形成明显受到抑制。PEG1450的最优添加量为丝光沸石合成时凝胶质量的2%。     

介孔量对梯级孔丝光沸石催化二甲醚羰基化反应性能的影响

本研究通过调整聚乙二醇（PEG 1450）的添加量制备了介孔量不同的梯级孔丝光沸石，并分别对其结构和二甲醚羰基化反应性能进行了表征和评价。结果表明，通过提高PEG1450加入量的方式可以提高丝光沸石的介孔量，但PEG 1450的添加量过高时不利于介孔的形成。当引入的介孔量适宜时丝光沸石能够保持原有的结构，强酸中心数量增多、弱酸和中强酸数量降低，二甲醚的传质效率和二甲醚羰化反应催化性能明显提高。受传质过程和酸分布的影响，梯级孔丝光沸石催化剂上二甲醚羰化反应活性明显改善，二甲醚转化率升高、单程寿命延长，重积炭的形成明显受到抑制。PEG1450的最优添加量为丝光沸石合成时凝胶质量的2%。     

甲胺化反应催化剂稀土改性丝光沸石的研究

研究了稀土改性丝光沸石催化剂对常压固定床上甲胺化反应的活性及选择性的影响，结果表明，以钇改性丝光沸石催化剂的活性及对二甲胺的选择性最佳。催化剂表征结果表明，稀土改性丝光沸石主要是引起丝光沸石中Ｂ酸中心发生变化，而对丝光沸石的晶体结构及表面硅铝原子比基本不产生影响。稀土改性能增强催化剂的热稳定性，延长催化剂的寿命。     

空间位阻对吡啶过度修饰导致丝光沸石二甲醚羰基化酸性位中毒后 再生的诱导作用

当今世界环境与能源问题日益加剧,乙醇作为一种重要的清洁燃料和化学品受到广泛关注,迫切需要探索高效的乙醇合成方法,以满足日益增长的市场需求.其中,将煤炭、生物质、页岩气等为原料合成的二甲醚通过羰基化反应制乙酸甲酯、乙酸甲酯加氢制乙醇的串联式绿色乙醇合成路线具有重要的工业应用前景.然而,在二甲醚羰基化过程中,丝光沸石分子筛易积碳失活,阻碍了其工业应用.吡啶改性可以毒化丝光沸石12元环孔道中的酸性位,抑制积碳的形成,进而大幅度提高该催化剂的稳定性,但同时会使其催化活性降低约40%–50%.为了解决这一难题,本文从分子水平上研究了吡啶吸附行为以及分子筛骨架空间位阻对丝光沸石催化剂上二甲醚羰基化反应的影响.通过解析丝光沸石的骨架结构,我们发现位于8元环侧袋和12元环孔道共用孔壁处O_2位置上的酸性位是二甲醚羰基化反应的活性位,但它们在吡啶修饰过程中易被毒化而使催化剂活性下降.密度泛函理论计算结果表明,吡啶分子因受分子筛骨架空间位阻的影响,在O_2处酸性位上的吸附较弱.而实验结果也表明,通过673 K热处理可以再生被吡啶毒化的O_2活性位,而并不影响12元环孔道中其它吡啶分子的吸附.因此,该热处理方法可以使丝光沸石催化剂保持高稳定性的同时,将二甲醚羰基化反应催化活性提高约60%.本文从分子水平证明了丝光沸石中O_2活性位对二甲醚羰基化反应的重要作用,为绿色乙醇合成技术研究提供了新的思路,也为其它高效分子筛催化体系设计提供了有益的参考.     

丝光沸石催化二甲醚羰基化研究进展

二甲醚羰基化反应是在二甲醚分子中定向插入一氧化碳的重要增碳反应,在工业生产中具有重要意义.近年来,研究发现廉价的丝光沸石可催化二甲醚羰基化反应,且具有较高的反应活性和十分优异的羰基化产物选择性,因此,得到了广泛的研究.本文对丝光沸石催化二甲醚羰基化的研究进行综述,介绍了羰基化反应的机理,并总结丝光沸石内部酸性位点调控的...     

预吸附吡啶增强二甲醚在丝光沸石上羰基化反应的稳定性

 对比研究了二甲醚在氢型丝光沸石和吡啶修饰的氢型丝光沸石上的二甲醚羰基化反应. 结果表明, 吡啶预吸附大大提高了二甲醚羰基化反应的稳定性, 并且在 473 K 反应 48 h 能够保持约 30% 的乙酸甲酯收率. 原位红外光谱和 NH3 程序升温脱附研究发现,吡啶吸附在 12 元环内, 而 8 元环内的酸性位基本不受干扰. 129Xe 核磁共振研究表明, 未经修饰的丝光沸石反应后孔道严重堵塞, 而吡啶修饰的分子筛反应后孔道基本不变. 因此, 12 元环内酸性位是积炭失活位, 吡啶吸附抑制了 12 元环内积炭的生成, 二甲醚羰基化反应能够在 8 元环内活性位上顺利进行.     

甲醇脱水制二甲醚的杂多酸/纳米HZSM-5复合固体酸催化剂

开发低温、高活性和良好稳定性的催化剂成为甲醇气相脱水制二甲醚乃至合成气一步法制二甲醚反应的核心.在氧化铝挤条成型的纳米HZSM-5沸石上负载Keggin结构12-磷钨酸制备了复合固体酸催化剂, 通过FT-IR、UV-Raman、³¹P MAS-NMR和XRD对所制备的样品进行表征. 以甲醇气相脱水制二甲醚为探针反应的研究结果表明, 在选定的操作条件下连续运转超过300 h, 甲醇摩尔转化率大于87%(理论转化率90.9%), 二甲醚摩尔选择性高于99.0%, 是目前该反应非常有效的催化剂之一.     

微米及纳米丝光沸石分子筛上二甲醚羰基化反应的积碳分析

对比研究了在传统微米尺寸和新结构纳米丝光沸石催化剂上二甲醚羰基化合成乙酸甲酯的反应行为.结果表明,通过减小分子筛的尺寸到纳米水平,可以有效提高反应物和产物到达或者脱离反应活性位的效率,从而提高了二甲醚的转化率;更重要的是,抑制了硬积碳的生成,使催化剂保持了更高的稳定性.     

蒙脱土负载Pd/Cu双金属纳米微粒催化Sonogashira偶联反应

为了证实过渡金属催化碳碳键交叉偶联反应的双金属效应,首次研究蒙脱土负载纳米钯铜双金属微粒催化Sonogahira交叉偶联反应.结合蒙脱土重金属吸附特性与DMF溶剂热羰化还原,发展了一种新的双金属纳米微粒合成方法,制备了钯铜比例为1∶1的双金属纳米微粒.催化条件优化实验发现,乙二醇二甲醚/水(V∶V=1∶4)混合体系为最佳溶剂.碳酸钾与三苯基膦存在下,MMT@Pd/Cu高效催化芳基碘与系列端炔的交叉偶联反应,以较好产率分离得到15个炔烃衍生物.动力学研究表明,水对蒙脱土片层的溶胀作用与Pd/Cu双金属协同效应是该催化剂高活性的关键.     

BEA/MOR两相共生分子筛的酸性及其催化性能

 用NH3-TPD方法研究了相同硅铝比不同相组成的BEA/MOR (β沸石与丝光沸石两相共生分子筛)样品的酸性,并考察了其对甲醇脱水制二甲醚反应的催化性能. 结果表明,不同相组成的共生分子筛样品的NH3-TPD谱中均出现两个NH3脱附峰,分别对应于NH3在沸石骨架中弱酸中心和强酸中心上的脱附. BEA/MOR的高温脱附峰温与其丝光沸石含量呈火山形曲线关系,而β沸石与丝光沸石机械混合物的高温脱附峰温与丝光沸石含量呈线性关系; 当丝光沸石相含量超过50%时, BEA/MOR强酸强度明显高于机械混合物,含丝光沸石65%的BEA/MOR样品的强酸强度最强,这表明共生分子筛与机械混合物间存在明显的区别. 用于催化甲醇脱水制二甲醚反应时, BEA/MOR样品上甲醇转化率与丝光沸石含量也呈火山形曲线关系,而机械混合物上甲醇的转化率与丝光沸石含量呈线性关系. 丝光沸石含量超过40%的BEA/MOR样品的催化活性都高于HM, 含丝光沸石65%的BEA/MOR样品活性最高. 硅铝比为11的HM虽然初活性高,但反应60 h后即很快失活,而硅铝比为53的HBEA/MOR初活性稍低,但其稳定性好.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.