Er~(3+)-Yb~(3+)掺杂SiO_2-SrO-NaF玻璃陶瓷的制备及表征

采用熔融晶化法制备了主晶相为SrF_2的Er~(3+)-Yb~(3+)共掺透明氟氧化物玻璃陶瓷,利用DSC、XRD、SEM、UV-Vis-NIR和荧光光谱对样品的结构、形貌、发光性能进行了测试与表征。研究表明:该体系玻璃最佳热处理温度为620℃,最佳热处理时间为2h,并讨论了Yb~(3+)不同掺杂浓度对Er~(3+)-Yb~(3+)共掺玻璃陶瓷样品上转换发光性能的影响,确定Er~(3+)-Yb~(3+)最佳掺杂浓度比为1∶7,同时观察到了明亮的绿光(522,540 nm)和较弱的红光(656 nm),对Er~(3+)和Yb~(3+)之间的能量传递过程进行了讨论。     

Er3+-Yb3+掺杂SiO2-SrO-NaF玻璃陶瓷的制备及表征

采用熔融晶化法制备了主晶相为SrF₂的Er³⁺-Yb³⁺共掺透明氟氧化物玻璃陶瓷,利用DSC、XRD、SEM、UV-Vis-NIR和荧光光谱对样品的结构、形貌、发光性能进行了测试与表征。研究表明：该体系玻璃最佳热处理温度为620℃,最佳热处理时间为2 h,并讨论了Yb³⁺不同掺杂浓度对Er³⁺-Yb³⁺共掺玻璃陶瓷样品上转换发光性能的影响,确定Er³⁺-Yb³⁺最佳掺杂浓度比为1：7,同时观察到了明亮的绿光（522,540 nm）和较弱的红光（656 nm）,对Er³⁺和Yb³⁺之间的能量传递过程进行了讨论。     

Tm3+-Tb3+-Eu3+共掺含Na3Gd(PO4)2晶相荧光玻璃陶瓷的制备及发光性能

采用熔融晶化法制备Tm~(3+)-Tb~(3+)-Eu~(3+)掺杂含Na_3Gd(PO_4)_2晶相荧光玻璃陶瓷,并对其光学性能进行了研究。利用差示扫描量热分析(DSC)、X射线衍射(XRD)、扫描电子显微镜(SEM)等测试,确定了样品的晶相结构和最佳热处理条件(740℃/3 h)。在359 nm激发下,Tm_2O_3、Tb_4O_7、Eu_2O_3掺杂浓度(物质的量分数)分别为0.2%、0.2%、0.95%时,玻璃陶瓷的色度坐标为(0.333 2,0.318 8),接近标准白光(0.333,0.333)。结合荧光光谱和荧光衰减曲线分析,证实了样品中存在Tm~(3+)→Eu~(3+)、Tb~(3+)→Eu~(3+)的能量传递。     

Ho3+/Yb3+共掺ZnO-Al2O3-GeO2-SiO2玻璃陶瓷的制备和上转换发光性质

综合ZnO-Al₂O₃-SiO₂系和锗酸盐玻璃陶瓷的优点,采用熔融-晶化法首次制备了Ho³⁺/Yb³⁺共掺以ZnAl₂O₄为主晶相的ZnO-Al₂O₃-GeO₂-SiO₂系玻璃陶瓷。因[GeO₄]四面体和[SiO₄]四面体都是玻璃网络形成体,讨论了GeO₂取代SiO₂对玻璃陶瓷样品硬度及发光性能的影响,最终确定GeO₂的取代量为10.55%（w/w）时,玻璃陶瓷综合性能最佳。在980 nm泵浦光的激发下,发现强的绿色（546 nm）和弱的红色（650 nm）上转换发光,并研究了不同Ho³⁺/Yb³⁺掺杂比对样品上转换发光的影响,最终结果表明当Ho³⁺/Yb³⁺掺杂比为1：11（n/n）时样品荧光强度最强,在绿色上转换发光材料方面具有潜在的应用。     

Ho3+/Yb3+共掺ZnO-Al2O3-GeO2-SiO2玻璃陶瓷的制备和上转换发光性质

综合ZnO-Al_2O_3-SiO_2系和锗酸盐玻璃陶瓷的优点,采用熔融-晶化法首次制备了Ho~(3+)/Yb~(3+)共掺以ZnAl_2O_4为主晶相的ZnO-Al_2O_3-GeO_2-SiO_2系玻璃陶瓷。因[GeO_4]四面体和[SiO_4]四面体都是玻璃网络形成体,讨论了GeO_2取代SiO_2对玻璃陶瓷样品硬度及发光性能的影响,最终确定GeO_2的取代量为10.55%(w/w)时,玻璃陶瓷综合性能最佳。在980 nm泵浦光的激发下,发现强的绿色(546 nm)和弱的红色(650 nm)上转换发光,并研究了不同Ho~(3+)/Yb~(3+)掺杂比对样品上转换发光的影响,最终结果表明当Ho~(3+)/Yb~(3+)掺杂比为1∶11(n/n)时样品荧光强度最强,在绿色上转换发光材料方面具有潜在的应用。     

Dy3+/Tb3+双掺含SrWO4晶相玻璃陶瓷的合成与能量传递

采用熔融晶化法成功制备了Dy~(3+)/Tb~(3+)双掺含SrWO4晶相玻璃陶瓷,并对其光学性能进行研究。利用差示扫描量热分析仪(DSC)确定了热处理温度,利用X射线衍射(XRD)确定了玻璃基质中有SrWO_4晶粒析出,并结合透过率曲线确定最佳析晶温度和时间为710℃保温1.5 h。探讨了当Dy_2O_3的浓度为0.8%(n/n)时,Tb_4O_7浓度对玻璃陶瓷样品发光性能的影响,在Dy~(3+)/Tb~(3+)双掺玻璃陶瓷的发射光谱中表明:在350 nm激发下,544 nm处存在明显的发射峰。随着Tb_4O_7浓度增加,能量传递效率逐渐增加。当Tb_4O_7浓度达到1.9%(n/n)时,绿光发射强度达到最大值。结合Dexter能量传递理论和荧光衰减曲线,确定了Dy~(3+)到Tb~(3+)存在能量传递。     

纳米晶Y_2O_3∶Eu~(3+)的合成及其热分析动力学

以Y(NO3)3、Eu2O3、CO(NH2)2为原料,使用超声波作用下的均匀沉淀法合成了纳米晶荧光粉Y2O3∶Eu3+。利用不同升温速率的热重及差热分析研究了纳米晶Y2O3∶Eu3+的合成动力学及晶粒生长动力学。研究表明,纳米晶Y2O3∶Eu3+的前驱体分解过程可分为3个步骤,利用Doyle-Ozawa法和Kissinger法分别计算了各个反应阶段的表观活化能,用Kissinger法确定每个反应阶段的反应级数和频率因子,并给出了各个阶段的动力学方程。根据晶粒生长动力学理论计算纳米荧光粉Y2O3∶Eu3+晶粒生长活化能为17.80kJ·mol-1,表明热处理过程中纳米晶粒的长大为扩散生长机制。     

Tm~(3+)/Er~(3+)/Ho~(3+)共掺SiO_2-Bi_2O_3-AlF_3-BaF_2玻璃发光性能

采用高温熔融法制备了Tm~(3+)/Er~(3+)/Ho~(3+)共掺的铋硅酸盐50SiO 2-40Bi_2O_3-5AlF_3-5BaF_2玻璃。研究了在808 nm激光器(Laser Diode)激发下Tm~(3+)/Er~(3+)/Ho~(3+)共掺的铋硅酸盐在2 060 nm处的发光性能,同时测试及分析了该铋硅酸盐玻璃的差热特性、吸收光谱及荧光光谱。根据吸收光谱以及Judd-Oflet理论,计算了Ho~(3+)的Judd-Oflet强度参数Ωt(t=2,4,6)以及Tm~(3+)/Er~(3+)/Ho~(3+)相应的吸收截面。铋硅酸盐玻璃中,Tm_2O_3、Er_2O_3和Ho_2O_3掺杂浓度分别为0.75%、1.0%和0.5%时,2 060 nm处Ho~(3+)∶5I7→5I8发射峰强度达到最大。对Tm~(3+)/Er~(3+)/Ho~(3+)3种离子的光谱性质和离子间可能存在的能量传递也做了分析。Ho~(3+)在1 953 nm处的最大吸收截面σabs为9.08×10-21 cm~2,在2 060 nm处的最大发射截面σem为1.168×10-20 cm~2,辐射寿命τmea为2.75 ms,具有良好的增益效应σemτ(3.212×10-20cm~2·ms)。     

Ho3+-Yb3+掺杂磷酸盐玻璃陶瓷的制备与发光性能

采用传统熔融法制备了Na_2O-Y_2O_3-P_2O_5-SiO_2前驱体玻璃,并对前驱体玻璃样品进行热处理,成功合成透明磷酸盐玻璃陶瓷。对玻璃陶瓷样品进行XRD分析确定玻璃基质中有Na_(3.6)Y_(1.8)(PO_4)_3晶体析出。讨论了热处理时间对玻璃陶瓷结晶度和晶粒尺寸的影响,确定热处理温度为655℃,热处理时间为2 h。比较Ho~(3+)单掺和Ho~(3+)-Yb~(3+)共掺玻璃陶瓷上转换发光强度,确定Ho~(3+)与Yb~(3+)的最佳掺杂物质的量之比为1∶2。同时讨论了Ho~(3+)-Yb~(3+)之间的能量转移。使用积分球测得样品的上转换发光量子效率。     

Eu3+-Tb3+共掺杂SiO2-B2O3-Na2O-Y2O3-P2O5玻璃陶瓷的制备与发光性能

采用高温熔融法制备Eu3+?Tb3+共掺杂SiO2?B2O3?Na2O?Y2O3?P2O5前驱体玻璃。对前驱体玻璃粉末进行差示扫描量热(DSC)分析,确定玻璃陶瓷样品的热处理温度。前驱体玻璃热处理后,采用X射线衍射(XRD)和扫描电镜(SEM)分析可知前驱体玻璃中有Na3.6Y1.8(PO4)3晶粒析出。利用荧光光谱对玻璃陶瓷样品的发光性能进行表征,同时分析了Tb3+离子的荧光衰减曲线,确定Eu3+、Tb3+离子的发光机理以及能量传递过程。通过对Eu3+?Tb3+共掺杂玻璃陶瓷样品的发射光谱采集并用色坐标软件和色温计算程序,获得玻璃陶瓷样品的色坐标和相关色温。     

Ce3+,Tb3+,Eu3+共掺杂Sr2MgSi2O7体系的白色发光和能量传递机理

通过正交试验,采用高温固相法制备了Sr2-x-y-zMgSi2O7∶xCe3+,yTb3+,zEu3+系列样品.使用X射线衍射仪和荧光光谱仪表征了样品的物相和发光性质,并讨论了Ce3+-Tb3+-Eu3+共掺杂Sr2MgSi2O7体系中的能量传递过程.实验结果表明,在327 nm波长激发下,所合成荧光粉的发射峰主要位于387 nm(蓝紫)、542nm(绿)和611 nm(红)处;分别以387,542和611 nm为监控波长,所得激发光谱显示荧光粉在327 nm处有最好的激发.在327 nm光激发下,系列样品发光进入白光区.最优化的荧光粉为Sr1.91MgSi2O7∶0.01Ce3+,0.05Tb3+,0.03Eu3+,其色坐标为(0.337,0.313),是一种潜在的发光二极管(LED)用白色荧光粉.     

Sm3+掺杂CaO-SiO2-B2O3发光玻璃的制备、表征及性质

用高温固相法合制备了以CaO-SiO₂-B₂O₃为基质，Sm³⁺为激活离子的发光玻璃。对Sm³⁺的淬灭浓度、基质中的硼硅比例、其他稀土离子的敏化作用以及基质组成等因素对玻璃发光特性的影响进行了探讨，并用红外和X-衍射分析对样品的结构进行了表征。结果表明：当Sm^3＋掺杂的物质的量分数为1.2%,激发波长λ ＝ 404 nm时,玻璃体60CaO-20SiO₂-20B₂O₃∶1.2Sm^3＋的发光强度为4 838 A.U.( λ ＝ 606 nm );这种发光玻璃具有将紫外及近紫外光转换为橙红色光的特点。少量的Eu^3＋的掺入，对玻璃体的发光起敏化作用；玻璃体中的组分CaO可被ZnO替代。     

Intense blue up-conversion luminescence in Tm3+/Yb3+ codoped oxyfluoride glass-ceramics containing beta-PbF2 nanocrystals

Up-conversion luminescence properties of a Tm3+/Yb3+ codoped oxyfluoride glass-ceramics under 980 nm excitation are investigated. Intense blue emission centered at 476 nm, corresponding to 1G4-->3H6 transitions of Tm3+ was simultaneously observed in the transparent oxyfluoride glass ceramics at room temperature. The intensity of the blue up-conversion luminescence in a 1 mol% YbF3-containing glass-ceramic was found to be about 40 times stronger than that in the precursor oxyfluoride glass. The reason for the intense Tm3+ up-conversion luminescence in the oxyfluoride glass-ceramics is discussed. The dependence of up-conversion intensities on excitation power and possible up-conversion mechanism are also evaluated.     

白色荧光粉NaGd（MoO4）2:Dy3+,Eu3+的水热合成及发光性能

采用谷氨酸辅助水热法合成了八面体形NaGd(MoO4)2:Dy3+,Eu3+白色荧光粉.X射线衍射结果表明,合成的样品为四方晶系的NaGd(MoO4)2纯相.扫描电子显微镜照片显示所制备的粒子为八面体形,各边长约为2μm.荧光光谱结果表明,在NaGd(MoO4)2:4%Dy3+,yEu3+(y=0,0.5%,0.6%,0.7%,0.8%,0.9%,1.0%)样品中,随着Eu3+掺入量的增加,Dy3+的发射峰逐渐减弱,而Eu3+的发射峰逐渐增强,说明Dy3+-Eu3+之间存在能量传递.通过色坐标图可知,当Eu3+掺杂量y=0.9%时,荧光粉的色坐标(0.338,0.281)与标准的白光色坐标(0.33,0.33)接近,表明NaGd(MoO4)2:4%Dy3+,0.9%Eu3+是很好的近紫外光激发下的白色荧光粉.     

Thermal stability and spectroscopic properties of Er3+-doped antimony-borosilicate glasses

This paper reports on the optical spectroscopic properties and thermal stability of Er(3+)-doped antimony-borosilicate glasses for developing 1.5mum optical amplifiers. Upon excitation at 980nm laser diode, an intense 1.5mum infrared fluorescence has been observed with the maximum full width at half maximum (FWHM) of 90nm for Er(3+)-doped antimony-borosilicate glasses. The emission cross-section and the lifetime of the (4)I(13/2) level of Er(3+) ions are 6.3x10(-21)cm(2) and 0.30ms, respectively. It is noted that the product of the emission cross-section and FWHM of the glass studied is as great as 567x10(-21)cm(2)nm, which is comparable or higher than that of bismuthate and tellurite glasses.     

Optical transitions of Er3+/Yb3+ codoped TeO2-WO3-Bi2O3 glass

Optical absorption and emission properties of the Er3+/Yb3+ codoped TeO2-WO3-Bi2O3 (TWB) glass has been investigated. The transition probabilities, excited state lifetimes, and the branching ratios have been predicted for Er3+ based on the Judd-Ofelt theory. The broad 1.5 microm fluorescence was observed under 970 nm excitation, and its full width at half maximum (FWHM) is 77 nm. The emission cross-section is calculated using the McCumber theory, and the peak emission cross-section is 1.03 x 10(-21) cm2 at 1.531 microm. This value is much larger than those of the silicate and phosphate glasses. Efficient green and weak red upconversion luminescence from Er3+ centers in the glass sample was observed at room temperature, and the upconversion excitation processes have been analyzed.     

钙钛矿结构荧光材料MZrO3:Eu3+,A (M=Ca2+, Ba2+; A=Li+, Na+, K+)的制备及其发光性质

Calcium and barium zirconate powders based upon CaZrO₃:Eu³⁺,A and BaZrO₃:Eu³⁺,A (A=Li⁺, Na⁺, K⁺) were prepared by combustion synthesis method and heating to ~1000℃ to improve crystallinity.The structure and morphology of materials were examined by X-ray diffraction (XRD) and scanningelectron microscopy (SEM). XRD results showed that CaZrO₃:Eu³⁺,A and BaZrO₃:Eu³⁺,A (A=Li⁺, Na⁺, K⁺) perovskites possessed orthorhombic and cubic structures, respectively. The morphologies of all powderswere very similar consisting of small, coagulated, cubical particles with narrow size distributions andsmooth and regular surfaces. The characteristic luminescences of Eu³⁺ ions in CaZrO₃:Eu³⁺,A (A=Li⁺, Na⁺, K⁺) lattices were present with strong emissions at 614 and 625 nm for ⁵D₀→⁷F₂ transitions with other weakeremissions observed at 575, 592, 655, and 701 nm corresponding to ⁵D₀→⁷F_n transitions (where n=0, 1, 3, 4 respectively). In BaZrO₃:Eu³⁺ both the ⁵D₀→⁷F₁ and ⁵D₀→⁷F₂ transitions at 595 and 613 nm were strong.Photoluminescence intensities of CaZrO₃:Eu³⁺ samples were higher than those of BaZrO₃:Eu³⁺ lattices. Thisremarkable increase of photoluminescence intensity (corresponding to ⁵D₀→⁷F_n transitions) was observedin CaZrO₃:Eu³⁺ and BaZrO₃:Eu³⁺ if co-doped with Li⁺ ions. An additional broad band composed of manypeaks between 440 to 575 nm was observed in BaZrO₃:Eu³⁺,,A samples. The intensity of this band wasgreatest in Li⁺ co-doped samples and lowest for K⁺ doped samples.     

Ca9Y(PO4)7:Ce3+,Tb3+纳米荧光粉的制备及发光性能

采用水热法制备出Ca₉Y（PO₄）₇：Ce³⁺,Tb³⁺纳米荧光粉,通过XRD、SEM和荧光光谱等对样品进行了分析,研究在Ca₉Y（PO₄）₇基质中引入Ce³⁺,Tb³⁺离子对发光性能的影响规律。研究发现因Tb³⁺离子自身能量交叉驰豫的存在,使得单掺Tb³⁺时,通过调节Tb³⁺离子的浓度可以实现对发光颜色的控制。同时研究了Ce³⁺-Tb³⁺之间的能量传递为电多极相互作用的偶极-四极机制,Ce³⁺-Tb³⁺之间最大的能量传递效率为55.6%。Ca₉Y（PO₄）₇：Ce³⁺,Tb³⁺的发光颜色可以通过激活离子之间的能量传递和共发射得到可控调节。SEM分析表明荧光粉颗粒尺寸在100 nm左右,分散性好。