Viscometric studies on saccharides in aqueous magnesium chloride solutions at T = (288.15 to 318.15) K

The viscosity B-coefficients of mono-, di-, tri-saccharides and the derivatives (methyl glycosides) in m_B = (0.5, 1.0, 2.0, and 3.0) mol · kg⁻¹ aqueous solutions of magnesium chloride have been determined from viscosity data using the Jones–Dole equation at T = (288.15, 298.15, 308.15, and 318.15) K. The viscosity B-coefficients of transfer (Δ_tB), the temperature derivatives of B-coefficients (dB/dT), pair and triplet viscometric interaction coefficients (η_AB, η_ABB) have been determined. The viscosity B-coefficients data of systems studied in water have been reported earlier. The results have been interpreted in light of the solute–solute and solute–solvent interactions occurring in these systems. The comparison of results has been made with those reported in the presence of potassium chloride, ammonium sulphate, and sodium sulphate.     

Effect of sodium acetate on the rheological behaviour of some mono-, di-, and tri-saccharides in aqueous solutions over the temperature range (288.15 to 318.15) K

The Jones–Dole viscosity B-coefficients for various mono-, di-, and tri-saccharides in water and in (0.5, 1.0, 2.0, and 3.0) mol · kg^?1 aqueous solutions of sodium acetate have been determined at different temperatures, T = (288.15, 298.15, 308.15, and 318.15) K from viscosity data. Densities used to determine viscosities have been reported earlier. The viscosity B-coefficients of transfer, Δ_tB, has been estimated for the transfer of saccharides from water to aqueous sodium acetate solutions. The positive Δ_tB values were obtained in all cases and their magnitudes increase with the increase in concentration of sodium acetate. Pair, η_AB and higher order, η_ABB viscometric interaction coefficients (using McMillan–Mayer theory), and dB/dT coefficients have also been determined. Activation Gibbs free energies and other related thermodynamic activation parameters of viscous flow have been determined using Feakin’s transition-state theory. These parameters have been discussed in terms of solute–solute and solute–solvent interactions occurring in these solutions.     

Molar volumes and viscosities of LiClO4 and LiBr in propylene carbonate + 1,2-dimethoxyethane mixed solvents at 298.15 K

The standard partial molar volumes, viscosity B-coefficients and activation free energies of lithium salts (LiClO₄ and LiBr) in propylene carbonate (PC) with 1,2-dimethoxyethane (DME) mixed solvents have been determined as a function of the mole fraction of DME at 298.15 K from precise density and viscosity measurements. The values studied are all positive and decrease monotonously with addition of DME in the PC, which indicates that nature of the solvents plays an important role. The effects are discussed in terms of preferential solvation and packing effect in the solvation shell and electrostriction. The differences between ClO₄⁻ and Br⁻ have also been discussed.     

Densities and Viscosities of Tris(acetylacetonato)cobalt(III) Complex Solutions in Various Solvents

The densities and the viscosities of tris(acetylacetonato)cobalt(III) solutions in acetonitrile, dichloromethane, chloroform, tetrachloromethane, benzene, toluene, ethylbenzene, and p-xylene were measured in the dilute concentration regions at several temperatures ranging from 278 to 313 K under ambient pressure. The partial molar volumes of the solvents and solute were calculated. They are independent of concentration and increase slightly as the temperature increases. The viscosity A- and B-coefficients of the Jones-Dole equation were obtained. The A-coefficients were found to be zero within experimental error. The B-coefficients are positive and decrease as the temperature increases. Thermodynamic quantities of activation for viscous flow were calculated on the basis of Eyring’s viscosity equation. From the quantities obtained in this study, along with some information from the literature, it is suggested that structure-making interactions occur between the segments of the complex and the solvent molecules. These interactions include electrostatic interactions between the local charge on the complex and the dipole moment of the solvent in solutions of acetonitrile and dichloromethane, interlocking packing interactions along C ₃-axis of the complex with solvent in solutions of chloroform and tetrachloromethane, and π-electron interactions between the chelate ring of the complex and the solvent in solutions of benzene, toluene, ethylbenzene, and p-xylene.     

Density, Viscosity and Refraction Index of Aqueous Solutions of 7-Hydroxycoumarin and Ethanol or 1-Propanol at Temperatures from 293.15 to 313.15 K

7-Hydroxycoumarin exhibits antioxidative, lipoxygenase inhibitive and anti-tumourigenic effects. Density and viscosity measurements have been carried out for the solutions of 7-hydroxycoumarin in mixture solvents of water and ethanol or 1-propanol at T = (293.15, 298.15, 303.15, 308.15 and 313.15) K. The measured data have been used to evaluate apparent molar volumes (V _? ), limiting apparent molar volumes ( $ V_{\phi }^{0} $ ), viscosity B-coefficients of the Jones–Dole equation and variation of B with temperature (dB/dT). The values of $ V_{\phi }^{0} $ and B-coefficients are positive and pass through their corresponding maxima at about 18 mol·kg^?1 ethanol molality and 20 mol·kg^?1 1-propanol molality, respectively. Besides, the values of $ V_{\phi }^{0} $ and B-coefficients decrease with increasing temperature. Molar refractive indices (R _D) of the ternary solutions at the temperature of 298.15 K have also been determined from measured refractive indices (n _D). There is an obvious increase of R _D with increasing molality of the solvent. These parameters have been interpreted in terms of solute–solvent interactions and structure making/breaking ability of components in the aqueous solution. The temperature and concentration dependences of the weak interactions in the solution systems have also been discussed.     

Viscosity of aqueous Na2SO4 solutions at temperatures from 298 to 573 K and at pressures up to 40 MPa

Viscosities of nine (1.5, 3, 5, 7, 10, 15, 20, 23, and 26) mass% of aqueous Na₂SO₄ solutions have been measured in the liquid phase with a capillary flow technique. Measurements were made at five isobars 0.1, 10, 20, 30, and 40 MPa. The range of temperatures was from 298.15 to 573.5 K. The total uncertainty of viscosity, pressure, temperature, and concentration measurements was estimated to be less than 1.5%, 0.05%, 15 mK, and 0.015%, respectively. The reliability and accuracy of the experimental method was confirmed with measurements on pure water for four selected isobars 5, 10, 20, and 40 MPa and at temperatures between 296.7 and 573.7 K. The experimental and calculated values from IAPWS (International Association for the Properties of Water and Steam) formulation for the viscosity of pure water show excellent agreement within their experimental uncertainty (AAD = 0.41%). The temperature, pressure, and concentration dependences of the relative viscosity (η/η₀) where η₀ is the viscosity of pure water are studied. The values of the viscosity A-, B-, and D-coefficients of the extended Jones–Dole equation for the relative viscosity (η/η₀) of aqueous Na₂SO₄ solutions as a function of temperature are studied. The maximum of the B-coefficient near the 323 K isotherm has been found. The behavior of the concentration dependence of the relative viscosity of aqueous Na₂SO₄ solutions is discussed in terms of the modern theory of transport phenomena in electrolyte solutions. The derived values of the viscosity A- and B-coefficients were compared with the results predicted by Falkenhagen–Dole theory of electrolyte solutions and calculated with the ionic B-coefficient data. Different theoretical models for the viscosity of electrolyte solutions were stringently tested with new accurate measurements on aqueous Na₂SO₄. The quality and predictive capability of the various models was studied. The measured values of viscosity were directly compared with the data reported in the literature by other authors.     

Rheological behaviour of some saccharides in aqueous potassium chloride solutions over temperature range (288.15 to 318.15) K

The viscosities, η of mono-, di-, tri-saccharides and methylglycosides, viz., d(+)-xylose (XYL), d(?)-arabinose (ARA), d(?)-ribose (RIB), d(?)-fructose (FRU), d(+)-galactose (GAL), d(+)-mannose (MAN), d(+)-glucose (GLU), d(+)-melibiose (MEL), d(+)-cellobiose (CEL), d(+)-lactose monohydrate (LAC), d(+)-maltose monohydrate (MAL), d(+)-trehalose dihydrate (TRE), sucrose (SUC), d(+)-raffinose pentahydrate (RAF), α-methyl-d(+)-glucoside (α-Me-GLU), methyl-α-d-xylopyranoside (Me-α-XYL), and methyl-β-d-xylopyranoside (Me-β-XYL) in water and in (0.5, 1.0, 2.0, and 3.0) mol · kg^?1 aqueous solutions of potassium chloride (KCl) have been determined at T = (288.15, 298.15, 308.15, and 318.15) K from efflux time measurements by using a capillary viscometer. Densities used to determine viscosities have been reported earlier. The viscosity data have been utilized to determine the viscosity B-coefficients employing the Jones–Dole equation at different temperatures. From these data, the viscosity B-coefficients of transfer, Δ_tB have been estimated for the transfer of various saccharides/methylglycosides from water to aqueous potassium chloride solutions. The Δ_tB values have been found to be positive, whose magnitude increases with the increase in concentration of potassium chloride in all cases. The dB/dT coefficients, pair, η_AB and triplet, η_ABB viscometric interaction coefficients have also been determined. Gibbs free energies of activation and related thermodynamic parameters of activation of viscous flow have been determined employing Feakin’s transition-state theory. The signs and magnitudes of various parameters have been discussed in terms of solute–solute and solute–solvent interactions occurring in these solutions. The effect of substitution of –OH by methoxy group, –OCH₃ has also been discussed.     

Viscosity of aqueous Ni(NO3)2 solutions at temperatures from (297 to 475) K and at pressures up to 30 MPa and concentration between (0.050 and 2.246) mol · kg−1

Viscosity of nine aqueous Ni(NO₃)₂ solutions (0.050, 0.153, 0.218, 0.288, 0.608, 0.951, 1.368, 1.824, and 2.246) mol · kg⁻¹ was measured in the temperature range from (297 to 475) K and at pressures (0.1, 10, 20, and 30) MPa. The measurements were carried out with a capillary flow technique. The total experimental uncertainty of viscosity, pressure, temperature, and composition measurements were estimated to be less than 1.6%, 0.05%, 15 mK, and 0.02%, respectively. All experimental and derived results are compared with experimental and calculated values reported in the literature. Extrapolation of the solution viscosity measurements to zero concentration (pure water values) for the given temperature and pressure are in excellent agreement (average absolute deviation, AAD = 0.13%) with the values of pure water viscosity from IAPWS formulation [J. Kestin, J.V. Sengers, B. Kamgar-Parsi, J.M.H. Levelt Sengers, J. Phys. Chem. Ref. Data 13 (1984) 175–189]. The viscosity data for the solutions as a function of concentration have been interpreted in terms of the extended Jones–Dole equation for strong electrolytes. The values of viscosity A-, B-, and D-coefficients of the extended Jones–Dole equation for the relative viscosity (η/η₀) of aqueous Ni(NO₃)₂ solutions as a function of temperature are studied. The derived values of the viscosity A- and B-coefficients were compared with the results predicted by Falkenhagen–Dole theory (limiting law) of electrolyte solutions and the values calculated with the ionic B-coefficient data. The measured values of viscosity for the solutions were also used to calculate the effective rigid molar volumes in the extended Einstein relation for the relative viscosity (η/η₀).     

Ion-solvent and ion-ion interactions of phosphomolybdic acid in aqueous solution of catechol at 298.15, 308.15, and 318.15 K

Apparent molar volume (V _Ø) and viscosity B-coefficients were measured for phosphomolybdicacid in aqueous solution of catechol from solution density (ρ) and viscosity (η) at 298.15, 308.15, and 318.15 K at various solute concentrations. The experimental density data were evaluated by Masson equation and the derived data were interpreted in terms of ion-solvent and ion-ion interactions. The viscosity data have been analyzed using Jones-Dole equation and the derived parameters, B and A, have been interpreted in terms of ion-solvent and ion-ion interactions respectively. The structure-making or breaking capacity of the solute under investigation has been discussed in terms of sign of (δ ² V _Ø ^o /δT ²) _P . The activation parameters of viscous flow were determined and discussed by application of transition state theory.     

Physicochemical investigation on interactions of some amino acids with aqueous tetra-butyl ammonium bromide solution at 298.15 K

Apparent molar volumes, viscosity B-coefficients, and apparent molar isentropic compressibilities of glycine, L-alanine, L-valine and L-leucine in 0.062, 0.125 and 0.256 mol kg^?1 aqueous tetra-butyl ammonium bromide (TBAB) solution have been determined at 298.15 K from their experimental density, flow time and sound speed measurements, respectively. The standard partial molar volumes and compressibilities are used to calculate the corresponding volume of transfer at infinite dilution, from water to aqueous TBAB solutions. The linear correlation of partial molar volumes for a homologous series of amino acids has been utilised to calculate the contribution of charged end groups and other alkyl chains of the amino acids to partial molar volumes. The hydration numbers of amino acids have also been determined. Viscosity B-coefficients have been calculated using the Jones–Dole equation. The values of the charged end groups contribution to the viscosity B-coefficients of the amino acids are calculated.     

Densities,Apparent Molar Volumes and Viscosities of Concentrated Aqueous NaNO<Subscript>3</Subscript> Solutions at Temperatures from 298 to 607 K and at Pressures up to 30 MPa

Densities of four (2.124, 2.953, 5.015 and 6.271 mol-kg⁻¹) and viscosities of eight (0.265, 0.503, 0.665, 1.412, 2.106, 2.977, 5.015 and 6.271 mol-kg⁻¹) NaNO₃(aq) solutions have been measured with a constant-volume piezometer immersed in a precision liquid thermostat and using capillary flow techniques, respectively. Measurements were made at pressures up to 30 MPa. The temperature range was 298–607 K for the density measurements and 298–576 K for the viscosity measurements. The total uncertainty of density, viscosity, pressure, temperature and composition measurements were estimated to be less than 0.06%, 1.6%, 0.05%, 15 mK and 0.02%, respectively. The temperature, pressure and concentration dependence of density and viscosity of NaNO₃(aq) solutions were studied. The measured values of density and viscosity of NaNO₃(aq) were compared with data and correlations reported in the literature. Apparent molar volumes were derived using the measured density values. The viscosity data have been interpreted in terms of the extended Jones–Dole equation for strong electrolytes. The values of the viscosity A-, B-, D- and F-coefficients of the extended Jones–Dole equation for the relative viscosity (η/η₀) of NaNO₃(aq) solutions were evaluated as a function of temperature. The derived values of the viscosity A- and B-coefficients were compared with the results predicted by Falkenhagen–Dole theory of electrolyte solutions and calculated with the ionic B-coefficient data.     

Experimental Study of the Effect of Temperature,Pressure and Concentration on the Viscosity of Aqueous NaBr Solutions

The viscosity of 10 (0.049, 0.205, 0.464, 0.564, 0.820, 1.105, 1.496, 2.007, 2.382, and 2.961 mol ċ kg⁻¹) binary aqueous NaBr solutions has been measured with a capillary-flow technique. Measurements were made at pressures up to 40 MPa. The range of temperature was 288–595 K. The total uncertainty of viscosity, pressure, temperature and composition measurements were estimated to be less than 1.6%, 0.05%, 15 mK, and 0.02%, respectively. The effect of temperature, pressure, and concentration on viscosity of binary aqueous NaBr solutions were studied. The measured values of the viscosity of NaBr(aq) were compared with data, predictions and correlations reported in the literature. The temperature and pressure coefficients of viscosity of NaBr(aq) were studied as a function of concentration and temperature. The viscosity data have been interpreted in terms of the extended Jones–Dole equation for the relative viscosity (η/η₀) to calculate accurately the values of viscosity A- and B-coefficients as a function of temperature. The derived values of the viscosity A- and B-coefficients were compared with the results predicted by the Falkenhagen–Dole theory of electrolyte solutions and calculated with the ionic B-coefficient data. The physical meaning parameters V and E in the absolute rate theory of the viscosity and hydrodynamic molar volume V k were calculated using the present experimental viscosity data. The TTG model has been used to compare predicted values of the viscosity of NaBr(aq) solutions with experimental values at high pressures.     

Apparent molar volume,viscosity, and adiabatic compressibility of some mineral sulfates in aqueous binary mixtures of formamide at 298.15, 308.15, and 318.15 K

The densities and viscosities of several sulfates, viz., ammonium sulfate, sodium sulfate, potassium sulfate, magnesium sulfate, zinc sulfate and cadmium sulfate in aqueous binary mixtures of formamide (FA) have been determined at 298.15, 308.15, and 318.15 K and at atmospheric pressure. The ultrasonic speeds of the electrolytic solutions have also been measured at 298.15 K. Apparent molar volumes (ϕ _V ), viscosity B-coefficients and adiabatic compressibilities (K _S) of these electrolytic solutions were calculated from the experimental densitiy, viscosity and acoustic data. The density and viscosity data were evaluated by using Masson’s and Jones-Dole equation respectively; the derived parameters have been analyzed in terms of ion-ion and ion-solvent interactions. The structure making/breaking capacities of the electrolytes have been inferred from the sign of (∂²ϕ _V ⁰/∂T ²) _P . The results showed that all the electrolytes act as structure-makers in these media. Also the compressibility data indicated electrostriction of the solvent molecules around the cations. The activation parameters of viscous flow were also determined and discussed by the application of transition state theory.     

Solution Properties of Ternary D-Glucose + 1-Ethyl-3-methylimidazolium Ethyl Sulfate + Water Solutions at 298.15 K

The effect of an ionic liquid, 1-ethyl-3-methylimidazolium ethyl sulfate ([EMIm]ESO₄), on the thermophysical properties of aqueous D-glucose solutions including density, viscosity, and electrical conductivity have been investigated at 298.15 K. Using these properties, the apparent molar volumes, V _φ , the viscosity B-coefficients and the molar conductivities, Λ _m, have been computed for the ternary D-glucose + [EMIm]ESO₄+water solutions. The V _φ values were used to calculate the standard partial molar volumes, V_f⁰V_{\phi}^{0}, and transfer volumes, D_trV_f⁰\Delta_{\mathrm{tr}}V_{\phi}^{0}, of D-glucose from water to aqueous ionic liquid solutions. These volumetric parameters, for all the solutions studied, are positive and increase monotonically with increasing the concentration of [EMIm]ESO₄. These observations have been interpreted in terms of the interactions between D-glucose and ionic liquid in the aqueous solution. The viscosity data were analyzed in terms of the Jones-Dole equation to determine the values of the viscosity B-coefficients. The calculated conductometric parameters, the limiting molar conductivities, Λ ₀, the association constants, K _a, and the Walden products, Λ ₀ η, for [EMIm]ESO₄, decrease with increasing concentration of D-glucose. This trend suggests that the ions of an ionic liquid do not have the same hydrodynamic size in the presence of D-glucose molecules (ILs) and consequently provides evidence for the dehydration effect of the ionic liquid in aqueous D-glucose solutions.     

Physicochemical properties and ion-solvent interactions in aqueous sodium,ammonium, and lead acetate solution

Densities (ρ), viscosities (η) and refractive indices (n _D) of aqueous sodium acetate (SA), ammonium acetate (AA), and lead acetate (LA) solutions have been measured for different concentrations of salts at 302.15 K. Apparent molar volumes (φ_v) for studied solutions were calculated from density data, and fitted to Masson’s relation and partial molar volume (φ _v ^o ) was determined. Viscosity data were fitted to Jones-Dole equation and viscosity A- and B-coefficients were determined. Refractive index and density data were fitted to Lorentz and Lorenz equation and specific refraction (R _D) were calculated. Behavior of various physicochemical properties indicated presence of strong ion-solvent interactions in present systems and the acetate salts structure maker in water.     

Structural properties of aqueous metoprolol succinate solutions. Density, viscosity, and refractive index at 311 K

Density, viscosity and refractive index of aqueous solutions of metoprolol succinate of different concentrations (0.005–0.05 mol dm^?3) were measured at 38°C. Apparent molar volume of resultant solutions were calculated and fitted to the Masson’s equation and apparent molar volume at infinite dilution was determined graphically. Viscosity data of solutions has been fitted to the Jone-Dole equation and viscosity A- and B-coefficients were determined graphically. Physicochemical data obtained were discussed in terms of molecular interactions.     

Thermodynamic studies on the interactions of diglycine with magnesium chloride in aqueous medium at different temperatures

Apparent molar heat capacities (C_P2,?), apparent molar volumes (V_2,?), and viscosities (η) of diglycine in water and in aqueous magnesium chloride (MgCl₂) solutions of molality m_S ≈ (0.05 to 0.70) mol · kg⁻¹ over the temperature range T = (288.15 to 328.15) K have been determined using high sensitivity micro-differential scanning calorimeter, vibrating-tube digital density meter, and automatic viscosity measuring unit (AVS 350), respectively. The data have been used to calculate the partial molar heat capacities and partial molar volumes at infinite dilution. The viscosity B-coefficients have also been obtained from viscosity data using Jones-Dole equation. The and values of diglycine in aqueous MgCl₂ solutions are higher than those in water and thus exhibit positive transfer functions ( and ), which are indicative of strong interactions between diglycine and MgCl₂. Corresponding viscosity B-coefficients of transfer are also generally positive. The transfer functions decrease with increase in temperature and increase with the concentration of MgCl₂. The free energies, enthalpies and entropies of activation for viscous flow of diglycine in aqueous MgCl₂ solutions have been obtained by using the Feakins transition-state theory. Partial molar expansibilities and at infinite dilution along with their temperature dependence, the interaction coefficients from the volume, heat capacity, and viscosity B-coefficients have been used to divulge the various kinds of plausible interactions between solute (diglycine) and cosolute (MgCl₂) in solutions.     

Apparent molar volume,viscosity <Emphasis Type="Italic">B</Emphasis>-coefficient,and adiabatic compressibility of tetrabutylammonium bromide in aqueous ascorbic acid solutions at <Emphasis Type="Italic">T</Emphasis> = 298.15, 308.15, and 318.15 K

Apparent molar volumes ϕ_ν and viscosity B-coefficients for tetrabutyl ammonium bromide (TBAB) in (0.00, 0.05, 0.10, and 0.15) mol dm⁻³ aqueous ascorbic acid solutions have been determined from solution density and viscosity measurements at temperatures over the range 298.15 to 318.15 K as function of concentration of ascorbic acid solutions. In the investigated temperature range, the relation: ϕ_ν⁰ = a ₀ + a ₁ T + a ₂ T ², have been used to describe the partial molar volume ϕ_ν⁰. These results, in conjunction with the results obtained in pure water, have been used to calculate the standard volumes of transfer Δϕ _ν ⁰ and viscosity B-coefficients of transfer for TBAB from water to aqueous ascorbic acid solutions for rationalizing various interactions in the ternary solutions. The structure making or breaking ability of TBAB has been discussed in terms of the sign of (δ²ϕ_ν⁰/δT ²) _P . An increase in the transfer volume of TBAB with increasing ascorbic acid concentration has been explained by Friedman-Krishnan co-sphere model. The activation parameters of viscous flow for the ternary solutions studied have also been calculated and explained by the application of transition state theory.     

Ion-solvent and ion-ion interactions of sodium molybdate and sodium tungstate in mixtures of acetonitrile and water at 298.15, 308.15, and 318.15 K

The apparent molar volumes (V _ϕ) and viscosity B-coefficients of sodium molybdate and sodium tungstate in aqueous binary mixtures of acetonitrile were determined from solution density and viscosity measurements at 298.15, 308.15 and 318.15 K and various electrolyte concentrations. The experimental density and viscosity data were evaluated by the Masson and Jones-Dole equations, respectively, and the parameters derived were interpreted in terms of ion-solvent and ion-ion interactions. The activation parameters of viscous flow were also determined and discussed using transition state theory. The article is published in the original.     

Thermodynamics of dilute aqueous solutions of imidazolium based ionic liquids

Experimental measurements of density ρ, speed of sound u, and viscosity η of aqueous solutions of various 1-alkyl-3-methylimidazolium based ionic liquid (IL) solutions have been performed in dilute concentration regime at 298.15 K to get insight into hydration behaviour of ILs. The investigated ILs are based on 1-alkyl-3-methylimidazolium cation, [C_nmim] having $[{\text{BF}}_4{]}^{-}$, [Cl]^?, $[{\text{C}}_1{\text{OSO}}_3{]}^{-}$, and $[{\text{C}}_8{\text{OSO}}_3{]}^{-}$ as anions where n = 4 or 8. Several thermodynamic parameters like apparent molar volume φ_V, isentropic compressibility β_s, and viscosity B-coefficients have been derived from experimental data. Limiting value of apparent molar volume has been discussed in terms of intrinsic molar volume (V_int) molar electrostriction volume (V_elec), molar disordered (V_dis), and cage volume (V_cage). Viscosity B-coefficients have been used to quantify the kosmotropic or chaotropic nature of ILs. Hydration number of ILs obtained using elctrostriction volume, isentropic compressibility, viscosity, and differential scanning calorimetry have been found to be comparative within the experimental error. The hydrophobic hydration has found to play an important role in hydration of ILs as compared to hydration due to hydrogen bonding and electrostriction. Limiting molar properties, hydration numbers, and B-coefficients have been discussed in terms of alkyl chain length of cation or nature of anion.