Electrochemical and Photoelectrochemical Study of Self‐assembled Monolayer of Phytic Acid on Brass

Phytic acid is an environment-friendly reagent for processing metals. The anticorrosion and inhibiting mechanism for phytic acid monolayers self-assembled on a brass (HSn70-1) electrode has been investigated by using electrochemical and photocurrent response methods. The electrochemical measurements indicate that phytic acid is liable to form surface complexes on the brass electrode, and the self-assembled monolayers (SAM) change the structure of the electric double-layer and shift the potential of zero charge positively. The photochemical measurement indicates that the brass electrode shows a p-type photoresponse owing to the formation of a Cu2O layer on its surface, and the presence of SAM weakens significantly the photoresponse, suggesting an excellent effect on anticorrosion, which is consistent with the EIS and polarization curve measurements. Adsorption of phytic acid was found to be typical of chemisorption, which can be reasonably described on the basis of the Langmuir isotherm.     

Self‐Assembled Redox System for Bioelectrocatalytic Assay of L‐Ascorbylphosphate and Alkaline Phosphatase Activity

Ferrocene‐terminated self‐assembled monolayer (Fc‐SAM) on gold was used as an electron‐transfer mediator in the electrochemical assay of L ‐ascorbic acid 2‐phosphate (AAP). The assay is based on the enzymatic action of alkaline phosphatase (ALP), which triggers the release of vitamin C (L ‐ascorbic acid, AA) from AAP. The latter is easily oxidized on the Fc‐SAM under the diffusion limiting conditions that favors quantitative measurement of the AA concentration on a rotating disk electrode. We demonstrate the utility of the electrochemically active Fc‐SAM to probe the mechanism and to determine the kinetic parameters of an enzymatic reaction. The electrochemical technique was compared to a conventional spectrophotometric method of ALP activity detection using p‐nitrophenylphosphate (p‐NPP) as a substrate. We demonstrate that our new technique is also suitable for the analytical determination of ALP activity. The detection limits for both AAP and ALP were found to be 13 μM and 2 pM, respectively.     

Electrochemical Investigation of Cytochrome c Immobilized onto Self‐Assembled Monolayer of Captopril

The electrochemical behavior of cytochrome c (cyt‐c) that was electrostatically immobilized onto a self‐assembled monolayer (SAM) of captopril (capt) on a gold electrode has been investigated. Cyclic voltammetry, scanning electrochemical microscopy (SECM) and electrochemical impedance spectroscopy were employed to evaluate the blocking property of the capt SAM. SECM was used to measure the bimolecular electron transfer (ET) kinetics (k_BI) between a solution‐based redox probe and the immobilized protein. In addition, the tunneling ET between the immobilized protein and the underlying gold electrode was calculated. A k_BI value of (5.0±0.6)×10⁸ mol^?1 cm³ s^?1 for the bimolecular ET and a standard tunneling rate constant (k⁰) of 46.4±0.2 s^?1 for the tunneling ET have been obtained.     

In Situ Synthesis of a Novel Quinone Imine Self‐Assembled Monolayer and Consideration of Its Reactivity with L‐Arginine

In situ functionalization of a 4‐aminothiophenol (4ATP) self‐assembled monolayer (SAM) on a Au electrode (4ATP/Au SAM) by the Michael addition reaction is considered. Under optimized conditions, the nucleophilic attack of the amino group of 4ATP/Au SAM to give an electrogenerated ortho‐quinone produced a novel electroactive SAM (ESAM). The ESAM could be oxidized to quinone‐imine SAM (QI SAM) for the covalent immobilization of L ‐arginine monolayers. Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and Fourier transform infrared (FTIR) spectroscopy are employed to characterize these systems.. The apparent heterogeneous rate constant (k_s^app) for ESAM/Au and the rate constant (k′) of the pseudo‐first order Michael addition reaction of L ‐arginine and ESAM/Au are calculated.     

Gold Electrode Modified with Self‐Assembled Monolayer of Cysteamine‐Functionalized MWCNT and Its Application in Simultaneous Determination of Dopamine and Uric Acid

The voltammetric behavior of dopamine (DA) and uric acid (UA) on a gold electrode modified with self‐assembled monolayer (SAM) of cysteamine (CA) conjugated with functionalized multiwalled carbon nanotubes (MWCNTs) was investigated. The film modifier of functionalized SAM was characterized by means of scanning electron microscopy (SEM) and also, electrochemical impedance spectroscopy (EIS) using para‐hydroquinone (PHQ) as a redox probe. For the binary mixture of DA and UA, the voltammetric signals of these two compounds can be well separated from each other, allowing simultaneous determination of DA and UA. The effect of various experimental parameters on the voltammetric responses of DA and UA was investigated. The detection limit in differential pulse voltammetric determinations was obtained as 0.02 µM and 0.1 µM for DA and UA, respectively. The prepared modified electrode indicated a stable behavior and the presence of surface COOH groups of the functionalized MWCNT avoided the passivation of the electrode surface during the electrode processes. The proposed method was successfully applied for the determination of DA and UA in urine samples with satisfactory results. The response of the gold electrode modified with MWCNT‐functionalized SAM method toward DA, UA, and ascorbic acid (AA) oxidation was compared with the response of the modified electrode prepared by the direct casting of MWCNT.     

Electrochemical Characterization of Self‐Assembled Monolayer of a Novel Manganese Tetrabenzylthio‐Substituted Phthalocyanine and Its Use in Nitrite Oxidation

Manganese phthalocyanine MnPc(SPh)₄ has been synthesized and used to form self assembled monolayers on gold electrodes. The well packed SAM monolayer was characterized by analyzing the blocking of a number of Faradic processes by cyclic voltammetry, evaluating the electrical characteristics of the modified electrode by electrochemical impedance and imaging the modified surface by electrochemical scanning microscopy. Finally, MnPc(SPh)₄‐SAM modified electrode displayed an electrocatalytic behavior toward the oxidation of nitrite.     

A Host‐Guest‐Recognition‐Based Electrochemical Sensor for Sequence‐Specific DNA Detection

We herein constructed a sensor that converts target DNA hybridization‐induced conformational transformation of the probe DNA to electrochemical response based on host‐guest recognition and nanoparticle label. In the sensor, the hairpin DNA terminal‐labeled with 4‐((4‐(dimethylamino)phenyl)azo)benzoic acid (dabcyl) and thiol group was immobilized on Au electrode surface as the probe DNA by Au‐S bond, and the CdS nanoparticles surface‐modified with β‐cyclodextrins (CdS‐CDs) were employed as electrochemical signal provider and host‐guest recognition element. Initially, the probe DNA immobilized on electrode kept the stem‐loop configuration, which shielded dabcyl from docking with the CdS‐CDs in solution due to the steric effect. After target hybridization, the probe DNA underwent a significant conformational change, which forced dabcyl away from the electrode. As a result, formerly‐shielded dabcyl became accessible to host‐guest recognition between β‐cyclodextrin (β‐CD) and dabcyl, thus the target hybridization event could be sensitively transduced to electrochemical signal provided by CdS‐CDs. This host‐guest recognition‐based electrochemical sensor has been able to detect as low as picomolar DNA target with excellent differentiation ability for even single mismatch.     

A Nonenzymatic Glucose Sensor Using Nanoporous Platinum Electrodes Prepared by Electrochemical Alloying/Dealloying in a Water‐Insensitive Zinc Chloride‐1‐Ethyl‐3‐Methylimidazolium Chloride Ionic Liquid

We report here a nonenzymatic sensor by using a nanoporous platinum electrode to detect glucose directly. The electrode was fabricated by electrochemical deposition and dissolution of PtZn alloy in zinc chloride‐1‐ethyl‐3‐methylimidazolium chloride (ZnCl₂‐EMIC) ionic liquid. Both SEM and electrochemical studies showed the evidences for the nanoporous characteristics of the as‐prepared Pt electrodes. Amperometric measurements allow observation of the electrochemical oxidation of glucose at 0.4 V (vs. Ag/AgCl) in pH 7.4 phosphate buffer solution. The sensor also demonstrates significant reproducibility in glucose detection; the higher the roughness factor of the Pt electrode, the lower the detection limit of glucose. The interfering species such as ascorbic acid and p‐acetamidophenol can be avoided by using a Pt electrode with a high roughness factor of 151. Overall, the nanoporous Pt electrode is promising for enzymeless detection of glucose at physiological condition.     

Highly Sensitive Electrochemical Sensor for Nitric Oxide Using the Self‐Assembled Monolayer of 1,8,15,22‐Tetraaminophthalocyanatocobalt(II) on Glassy Carbon Electrode

Glassy carbon (GC) electrode modified with a self‐assembled monolayer (SAM) of 1,8,15,22‐tetraaminophthalocyanatocobalt(II) (4α‐Co^IITAPc) was used for the selective and highly sensitive determination of nitric oxide (NO). The SAM of 4α‐Co^IITAPc was formed on GC electrode by spontaneous adsorption from DMF containing 1 mM 4α‐Co^IITAPc. The SAM showed two pairs of well‐defined redox peaks corresponding to Co^III/Co^II and Co^IIIPc^?1/Co^IIIPc^?2 in 0.2 M phosphate buffer (PB) solution (pH 2.5). The SAM modified electrode showed excellent electrocatalytic activity towards the oxidation of nitric oxide (NO) by enhancing its oxidation current with 310 mV less positive potential shift when compared to bare GC electrode. In amperometric measurements, the current response for NO oxidation was linearly increased in the concentration range of 3×10^?9 to 30×10^?9 M with a detection limit of 1.4×10^?10 M (S/N=3). The proposed method showed a better recovery for NO in human blood serum samples.     

Electrochemical Determination of Cu(II) Ions by 4‐Formylphenylboronic Acid Modified Gold Electrode

A self‐assembled monolayer (SAM) modified by 4‐formylphenylboronic acid was formed on the gold electrode, which was applied for the determination of trace concentrations of Cu(II). The formation of advanced SAM on the gold electrode was evidenced by electrochemical impedance spectroscopy, atomic force microscopy and contact angle measurements. Electrochemical determination of Cu(II) ions was performed by square wave voltammetry. Some mutual interferences caused by Cd(II), Co(II), Fe(II), Ni(II) and Pb(II) ions were investigated and it was demonstrated how the negative effects of these interfering ions could be eliminated by adjustment of proper parameters of square wave voltammetry.     

Screen‐Printed Electrochemical 96‐Well Plate: a High‐Throughput Platform for Multiple Analytical Applications

A new screen‐printed electrochemical array formed by 96 three‐electrode electrochemical cells with carbon‐based working electrodes (DRP‐96X110) was developed by DropSens. The electrochemical and electro(analytical) performance of this multiple‐analysis plate is herein presented. Different proofs of concept relying on reference benchmark redox compounds, streptavidin‐biotin high affinity interactions and magnetic‐based immunoassays were carried out. The results showed the electrochemical plate versatility and usefulness as an innovative high‐throughput transducer surface for multiple and decentralized applications.     

Suppressing charge recombination by incorporating 3,6‐carbazole into poly[9‐(heptadecan‐9‐yl)‐9H‐carbazole‐2,7‐diyl‐alt‐(5,6‐bis‐(octyloxy)‐4,7‐di(thiophen‐2‐yl)benzo[1,2,5]‐thiadiazole)‐5,5‐diyl]

A series of poly[9‐(heptadecan‐9‐yl)‐9H‐carbazole‐2,7‐diyl‐alt‐(5,6‐bis‐(octyloxy)‐4,7‐di(thiophen‐2‐yl)benzo‐[1,2,5]‐thia‐diazole)‐5,5‐diyl] compositions containing various ratios of 3,6‐carbazole was synthesized for testing in a polymer solar cell. An appropriate amount of 3,6‐carbazole units incorporated into the copolymer improved intermolecular charge transport, whereas excess amount of 3,6‐carbazole units temporarily seized on the partial negative charge generated in the conjugation breaks. We extensively studied the effects of the incorporated 3,6‐carbazole units on the intermolecular interactions, which can affect nongeminated recombination in bulk heterojunction‐polymer solar cells. These properties were investigated using photocurrent‐ and light intensity‐dependent measurements and electrochemical impedance spectroscopy. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2047–2056     

1,4‐Benzoquinone Derivatives for Enhanced Bioelectrocatalysis by Fructose Dehydrogenase from Gluconobacter Japonicus: Towards Promising D‐Fructose Biosensor Development

D‐fructose amount in food and beverages should be carefully controlled in order to avoid its overconsumption by human, which can lead to various metabolic diseases. Thus, the development of a low‐cost and portable (bio)sensors, which realize the on‐site monitoring of D‐fructose, is still highly required. In this work, we proposed several reagentless bioelectrochemical systems (BioESs) based on fructose dehydrogenase EC1.1.99.11 from Gluconobacter japonicus (FDH) and on 2‐arylamine‐1,4‐benzoquinone (ABQ) derivatives as a platform for the development of D‐fructose electrochemical biosensor. To design a reliable and easily reproducible BioES, we used the simple physical sorption as the electrode modification strategy for ABQs and FDH immobilization that is suitable for low‐cost mass production of the biosensors by standard microfabrication techniques. To choose the most suitable ABQ compounds for BioESs design, we proposed a novel theoretical approach of potential ET mediator evaluation through its electrochemical properties. A set of newly synthesized and of previously applied ABQs was characterized both electrochemically and using the density functional theory (DFT). It was shown that results obtained by quantum chemical analysis were in a good agreement with the ABQ characteristics obtained in electrochemical measurements. We suggest that the calculated local ionization energy values and theoretical redox potential obtained by DFT are a powerful tool for prediction of ABQs electrochemical properties. The performance of the BioESs with FDH under study was determined by electrochemical and electronic properties of ABQ derivatives and FDH orientation and stabilization on the electrode surface. The most promising BioES was based on carbon paste electrodes and 2‐(3‐nitro(phenyl)amino)‐ cyclohexa‐2,5‐dien‐1,4‐dione as ET mediator, which accelerated FDH catalysis and improved its stability better, then other studied ABQs. The bioelectrocatalytic process was characterized by initial apparent maximum current density of 7.1 μA cm^?2 at the optimal conditions (+400 mV vs. Ag/AgCl, McIlvaine's buffer, pH 5.0 and 20 °C). The findings of this research open new possibilities for development of cost‐effective biosensors with FDH and, potentially, with other redox enzymes.     

Detection of the Short‐Lived Radical Cation Intermediate in the Electrooxidation of N,N‐Dimethylaniline by Mass Spectrometry

The N,N‐dimethylaniline (DMA) radical cation DMA^.+, a long‐sought transient intermediate, was detected by mass spectrometry (MS) during the electrochemical oxidation of DMA. This was accomplished by coupling desorption electrospray ionization (DESI) MS with a waterwheel working electrode setup to sample the surface of the working electrode during electrochemical analysis. This study clearly shows that DESI‐based electrochemical MS is capable of capturing electrochemically generated intermediates with half‐lives on the order of microseconds, which is 4–5 orders of magnitude faster than previously reported electrochemical mass spectrometry techniques.     

Electrochemical Properties of Ordered Mesoporous Carbon Film Adsorbed onto a Self‐Assembled Alkanethiol Monolayer on Gold Electrode

A stable ordered mesoporous carbon (OMC) film electrode was successfully constructed by adsorbing OMC onto a self‐assembled monolayer (SAM) of C₁₈H₃₇SH chemisorbed on the Au electrode. Transmission electron microscopy (TEM), atomic force microscopy (AFM), and electrochemical methods were used to characterize the properties of the OMC film electrode. The adsorbed OMC can restore the heterogeneous electron transfer almost totally blocked by the alkanethiol monolayer. Nyquist plots show a sharply decrease of the charge transfer resistance (R_ct) of the Fe(CN) couple at the OMC film electrode. Furthermore, the OMC film electrode is found to possess a significantly reduced interfacial capacitance and largely enhanced current response of hydrogen peroxide. This novel approach to the fabrication of stable OMC film electrode with excellent electrochemical properties is believed to be very attractive for electrochemical studies and electroanalytical applications.     

Self‐Assembly Film of Zeolite Y Nanocrystals Loading Palladium on an Au Electrode for Electrochemical Applications

Nano‐scale zeolite Y crystals were synthesized, and palladium nanoparticles were prepared in the supercage of the zeolite by “ship‐in‐a‐bottle” approach. A novel method to fabricate zeolite‐modified electrode (ZME) loading Pd nanoparticles was developed, in which the zeolite Y loading Pd²⁺ ions was self‐assembled on (3‐mercaptopropyl) trimethoxysilane‐attached Au surface to form the stable and density packed multilayers (SAM‐ZME). The structures of zeolite Y and the SAM‐ZME were investigated by using TEM, XRD and SEM techniques. Pd²⁺ ions in the SAM‐ZME were converted into Pd nanoparticles (Pd_n⁰) by two steps consisting of the electrochemical reduction as well as the succeeding admission and release of CO. The redox couple [Fe(CN)₆]^3?/4? was used to probe the electron‐transfer barrier properties during self‐assembling process. Moreover, the special properties of the SAM‐ZME loading Pd_n⁰ were studied by using cyclic voltammetry and CO‐probe in situ FTIR spectroscopy. The results illustrated that Pd_n⁰ in the SAM‐ZME exhibits higher electrocatalytic activity for oxidation of adsorbed CO than that of ZME prepared in our previous study by zeolite coating method. The present study is of importance in design and preparation of SAM‐ZME, which poccesseses excellent properties for the immobilization of electrocatalysts or biomolecules.     

Carbon Nanotubes‐Based Amperometric Cholesterol Biosensor Fabricated Through Layer‐by‐Layer Technique

A carbon nanotubes‐based amperometric cholesterol biosensor has been fabricated through layer‐by‐layer (LBL) deposition of a cationic polyelectrolyte (PDDA, poly(diallyldimethylammonium chloride)) and cholesterol oxidase (ChOx) on multi‐walled carbon nanotubes (MWNTs)‐modified gold electrode, followed by electrochemical generation of a nonconducting poly(o‐phenylenediamine) (PPD) film as the protective coating. Electrochemical impedance measurements have shown that PDDA/ChOx multilayer film could be formed uniformly on MWNTs‐modified gold electrode. Due to the strong electrocatalytic properties of MWNTs toward H₂O₂ and the low permeability of PPD film for electroacitve species, such as ascorbic acid, uric acid and acetaminophen, the biosensor has shown high sensitivity and good anti‐interferent ability in the detection of cholesterol. The effect of the pH value of the detection solution on the response of the biosensor was also investigated. A linear range up to 6.0 mM has been observed for the biosensor with a detection limit of 0.2 mM. The apparent Michaelis‐Menten constant and the maximum response current density were calculated to be 7.17 mM and 7.32 μA cm^?2, respectively.     

Electrochemical Glutathione Sensor Based on Electrochemically Deposited Poly‐m‐aminophenol

Preparation and characterization of electrodes suitable for determination of glutathione is reported in this study. For this poly‐m‐aminophenol (PmAP), poly‐o‐aminophenol, and poly‐p‐aminophenol were electrochemically deposited from aqueous solution on the surface of glassy carbon (GC) electrode by potential cycling in the range of +0.2–+1.0 V. The modified GC electrodes were characterized by cyclic voltammetry, electrochemical impedance spectroscopy, contact angle measurement and ellipsometry. It was found that poly‐m‐aminophenol modified GC electrode (PmAP/GC‐electrode) is most suitable for electroanalytical determination of glutathione. An electroanalytical system for the determination of glutathione based on the PmAP/GC‐electrode was developed. The analytical system was characterized by low limit of detection, good stability, high sensitivity and wide linear detection range.     

A Water‐Bridged H‐Bonding Network Contributes to the Catalysis of the SAM‐Dependent C‐Methyltransferase HcgC

[Fe]‐hydrogenase hosts an iron‐guanylylpyridinol (FeGP) cofactor. The FeGP cofactor contains a pyridinol ring substituted with GMP, two methyl groups, and an acylmethyl group. HcgC, an enzyme involved in FeGP biosynthesis, catalyzes methyl transfer from S ‐adenosylmethionine (SAM) to C3 of 6‐carboxymethyl‐5‐methyl‐4‐hydroxy‐2‐pyridinol ( 2 ). We report on the ternary structure of HcgC/S ‐adenosylhomocysteine (SAH, the demethylated product of SAM) and 2 at 1.7 Å resolution. The proximity of C3 of substrate 2 and the S atom of SAH indicates a catalytically productive geometry. The hydroxy and carboxy groups of substrate 2 are hydrogen‐bonded with I115 and T179, as well as through a series of water molecules linked with polar and a few protonatable groups. These interactions stabilize the deprotonated state of the hydroxy groups and a keto form of substrate 2 , through which the nucleophilicity of C3 is increased by resonance effects. Complemented by mutational analysis, a structure‐based catalytic mechanism was proposed.     

Selective response of antigen‐antibody reactions on chiral surfaces modified with 1,2‐diphenylethylenediamine enantiomers

This work reported a comparative analysis of the amperometric responses of antigen‐antibody reactions on two stable chiral surfaces which were modified with 1,2‐diphenylethylenediamine enantiomers. Alpha‐fetoprotein antibody and antigen (anti‐AFP and AFP) were selected as model systems. First, (1R,2R)‐1,2‐diphenylethylenediamine or (1S,2S)‐1,2‐diphenylethylenediamine was modified on the gold surface of the electrode through amide linkage to construct chiral surfaces. Then, anti‐AFP was immobilized on the chiral electrode surface by electrostatic and hydrogen bonding interactions. The electrochemical characteristics of the modified electrodes were studied via cyclic voltammetry. The selective current responses of antigen‐antibody reactions on chiral electrode surfaces for different incubation time and varying AFP concentrations were monitored. The antigen‐antibody reactions were greatly influenced by the chirality of 1,2‐diphenylethylenediamine enantiomers, and the amperometric responses obtained from the (1S,2S)‐1,2‐diphenylethylenediamine modified electrode was obviously stronger than that from the (1R,2R)‐1,2‐diphenylethylenediamine modified electrode. Such work may not only offer valuable reference to the research of chiral drugs, but also help to comprehend the high selectivity of chiral molecular species in biosystems. Copyright © 2011 John Wiley & Sons, Ltd.