Luminescent Materials: Locking π‐Conjugated and Heterocyclic Ligands with Boron(III)

Multidisciplinary research on novel organic luminescent dyes is propelled by potential applications in plastic electronics and biomedical sciences. The construction of sophisticated fluorescent dyes around a tetrahedral boron(III) center is a particular approach that has fueled the creativity of chemists. Success in this enterprise has been readily achieved with simple synthetic protocols, the products of which display unusual spectroscopic behavior. This account is a critical review of recent advances in the field of boron(III) complexes (excluding BODIPYs and acetylacetonate boron complexes) involving species displaying similar coordination features, and we outline their potential development in several disciplines.     

Far‐Red Emitting Fluorescent Dyes for Optical Nanoscopy: Fluorinated Silicon–Rhodamines (SiRF Dyes) and Phosphorylated Oxazines

Far‐red emitting fluorescent dyes for optical microscopy, stimulated emission depletion (STED), and ground‐state depletion (GSDIM) super‐resolution microscopy are presented. Fluorinated silicon–rhodamines (SiRF dyes) and phosphorylated oxazines have absorption and emission maxima at about λ≈660 and 680 nm, respectively, possess high photostability, and large fluorescence quantum yields in water. A high‐yielding synthetic path to introduce three aromatic fluorine atoms and unconventional conjugation/solubilization spacers into the scaffold of a silicon–rhodamine is described. The bathochromic shift in SiRF dyes is achieved without additional fused rings or double bonds. As a result, the molecular size and molecular mass stay quite small (<600 Da). The use of the λ=800 nm STED beam instead of the commonly used one at λ=750–775 nm provides excellent imaging performance and suppresses re‐excitation of SiRF and the oxazine dyes. The photophysical properties and immunofluorescence imaging performance of these new far‐red emitting dyes (photobleaching, optical resolution, and switch‐off behavior) are discussed in detail and compared with those of some well‐established fluorophores with similar spectral properties.     

Lysosome‐targeted Cyclometalated Iridium (III) Anticancer Complexes Bearing Phosphine‐Sulfonate Ligands

The synthesis, characterization and biological activity of four cyclometalated Ir (III) complexes ( Ir1 ‐ Ir4 ) containing different phosphine‐sulfonate ligands are reported. Most of these complexes showed good activity against A549 cancer cell lines and the human HeLa cervical cell lines. Spectroscopic properties study displays that all four complexes show rich fluorescence with emission maxima in the range of 474–510 nm. Fluorescence property of these complexes provides a tool to investigate the microscopic mechanism by confocal microscopy. Notably, the typical Ir (III) complex Ir4 can specially localize to lysosome, damage it and induce cell death via apoptosis. In addition, Ir4 enters into A549 cancer cells dominantly through energy‐dependent pathway.     

An iron(III) complex salt containing pyrazole as both ligand and counter‐ion: bis(1H‐pyrazol‐2‐ium) pentacyanido(1H‐pyrazole‐κN2)ferrate(III)

The title compound, (C₃H₅N₂)₂[Fe(CN)₅(C₃H₄N₂)], is composed of a mononuclear [Fe(CN)₅(pyrazole)]²⁻ dianion and two 1H‐pyrazol‐2‐ium cations. A three‐dimensional supramolecular network is formed through a rich scheme of N—H...N hydrogen bonds and C—H...π interactions among the cations and anions.     

Preparation,characterization, and properties of poly(thioether ether imide)s from isomeric bis(chlorophthalimide)s and 4,4′‐thiobisbenzenethiol

A series of isomeric poly(thioether ether imide)s (PTEIs) containing both thioether and ether linkages were prepared by nucleophilic substitution reaction of isomeric bis(chlorophthalimide)s with 4,4′‐thiobisbenzenethiol. The inherent viscosities of these polymers were in the range of 0.40–0.56 dL/g in m‐cresol at 30°C. The T_g values of PTEIs were 196–236°C; T_5% values reached up to 509–529°C in nitrogen and 508–534°C in air, which indicated this kind of polyimide possessed excellent thermal stability. The hydrolytic stability was arranged in the order: a > b > c > d > e, and improved with increasing the content of 3‐substituted phthalimide unit in the polymer backbone. Flexible films could be cast from the polymer solution with a solid content of 10%. The PTEI films exhibited good mechanical properties with tensile strengths of 90–104 MPa, elongations at break of 6.6–7.9%, and tensile moduli of 2.3–2.6 GPa. The minimum complex viscosity of PTEIs c was about 100 Pa·s at 310°C and the minimum melt viscosity of PTEIs (a–e) decreased with increasing the content of unsymmetrical 3,4′‐substituted phthalimide units. Copyright © 2014 John Wiley & Sons, Ltd.     

Bi‐anchoring Organic Dyes that Contain Benzimidazole Branches for Dye‐Sensitized Solar Cells: Effects of π Spacer and Peripheral Donor Groups

Benzimidazole‐branched bi‐anchoring organic dyes that contained triphenylamine/phenothiazine donors, 2‐cyanoacrylic acid acceptors, and various π linkers were synthesized and examined as sensitizers for dye‐sensitized solar cells. The structure–activity relationships in these dyes were systematically investigated by using absorption spectroscopy, cyclic voltammetry, and density functional theory calculations. The wavelength of the absorption peak was more‐heavily influenced by the nature of the π linker than by the nature of the donor. For a given donor, the absorption maximum (λ_max) was red‐shifted on changing the π linker from phenyl to 2,2′‐bithiophene, whilst the dyes that contained triphenylamine units displayed higher molar extinction coefficients (?) than their analogous phenothiazine‐based triphenylamine dyes, which led to good light‐harvesting properties in the triphenylamine‐based dyes. Electrochemical data for the dyes indicated that the triphenylamine‐based dyes possessed relatively low‐lying HOMOs, which could be beneficial for suppressing back electron transfer from the conduction band of TiO₂ to the oxidized dyes, owing to facile regeneration of the oxidized dye by the electrolyte. The best performance in the DSSCs was observed for a dye that possessed a triphenylamine donor and 2,2′‐bithiophene π linkers. Electron impedance spectroscopy (EIS) studies revealed that the use of triphenylamine as the donor and phenyl or 2,2′‐bithiophene as the π linkers was beneficial for disrupting the dark current and charge‐recombination kinetics, which led to a long electron lifetime of the injected electrons in the conduction band of TiO₂.     

Boron（Ⅲ） Tribromide or Tianium （Ⅳ） Bromide and Lewis Base Promoted Baylis—Hillman Reaction

It was found that,when the Baylis-Hillman reaction of arylaldehydes with methyl vinyl ketone was carried out at below -20℃ in the presence of boron (Ⅲ） tribromide or titanium (Ⅳ） bromide using a catalytic amount of Lewis base such as amine,the brominated compounds and the Baylis-Hillman adducts could be obtained as the major products in good yields for various aryl aldehydes.But at room temperature,the elimination products were the major products.In addition,the palladium catalyzed allylic substitution reactions of the elimination products were also examined.     

A square‐planar hydrated cationic tetrakis(methimazole)gold(III) complex

The cationic pseudo‐square‐planar complex tetrakis(1‐methyl‐2,3‐dihydro‐1H‐imidazole‐2‐thione‐κS)gold(III) trichloride sesquihydrate, [Au(C₄H₆N₂S)₄]Cl₃·1.5H₂O, was isolated as dark‐red crystals from the reaction of chloroauric acid trihydrate (HAuCl₄·3H₂O) with four equivalents of methimazole in methanol. The Au^III atoms reside at the corners of the unit cell on an inversion center and are bound by the S atoms of four methimazole ligands in a planar arrangement, with S—Au—S bond angles of approximately 90°.     

Electronic spectra and first‐order hyperpolarizability of 4‐(dicyanomethylene)‐2,6‐bis‐ (2′‐thiophene‐vinyl)‐pyran derivatives

On the basis of the ZINDO program, we have designed a program to calculate the first‐order hyperpolarizability β_ijk and β_μ according to the sum‐over‐states (SOS) expression. The first‐order hyperpolarizability of 4‐(dicyanomethylene)‐2,6‐bis‐(2′‐thiophene‐vinyl)‐pyran derivatives were studied. The calculated results were that the 4‐(dicyanomethylene)‐2,6‐bis‐(2′‐thiophene‐vinyl)‐pyran derivatives exhibit good nonlinearity with their β₀ values, which are slightly less than that of the corresponding 2,6‐bis‐styryl‐4‐(dicyanomethylene)‐pyran derivatives. It does not agree with the auxiliary donor–acceptor effects theory. The 4‐(dicyanomethylene)‐2,6‐bis‐(2′‐thiophene‐vinyl)‐pyran derivatives, having two low‐lying electronic excited states that contribute to the molecular hyperpolarizability in an additive manner, are good candidates as chromophores due to their high nonlinearities and good thermal stability. © 2001 John Wiley & Sons, Inc. Int J Quant Chem 82: 65–72, 2001     

Gold(III) π‐Allyl Complexes

Gold(III) π‐complexes have been authenticated recently with alkenes, alkynes, and arenes. The key importance of Pd^II π‐allyl complexes in organometallic chemistry (Tsuji–Trost reaction) prompted us to explore gold(III) π‐allyl complexes, which have remained elusive so far. The (P,C)Au^III(allyl) and (methallyl) complexes 3 and 3′ were readily prepared and isolated as thermally and air‐stable solids. Spectroscopic and crystallographic analyses combined with detailed DFT calculations support tight quasi‐symmetric η³‐coordination of the allyl moiety. The π‐allyl gold(III) complexes are activated towards nucleophilic additions, as substantiated with β‐diketo enolates.     

Iron(III)‐Complexes Engaged in the Biochemical Processes in Seawater. I. Voltammetry of Fe(III)‐Succinate Complexes in Model Aqueous Solution

Fe³⁺ complexes with succinic acid, a ligand naturally present in seawater, were investigated in aqueous solutions by square‐wave and cyclic voltammetry. [Fe(suc)₂(OH)₂] and [Fe(suc)₃] were detected at potentials ?0.22 and ?0.37 V, depending on C_suc in the ranges from 0.01 to 0.07 and 0.1 to 0.5 mol L^?1, respectively. Redox processes were irreversible, first with reactant adsorption and second diffusion controlled, both accompanied by chemical step. By UV/Vis spectra formation of these complexes was confirmed and equilibrium constant Fe(suc)₂(OH)₂?Fe(suc)₃ calculated (logK_2?3=(1.14±0.15) mol^?1 L), as well as their perceptible stoichiometry. With NTA as competing ligand, conditional stability constant of [Fe(suc)₂(OH)₂] complex was calculated (β^cond=(3.1±1.3)×10²² mol^?1 L).     

Construction of a Highly Selective and Sensitive La(III) Sensor Based on N‐(2‐Pyridyl)‐N′‐(4‐methoxyphenyl)‐thiourea for Nano Level Monitoring of La(III) Ions

N‐(2‐Pyridyl)‐N′‐(4‐methoxyphenyl)‐thiourea (PMPT) was found to be a suitable neutral ion carrier for the construction of a highly selective and sensitive La(III) membrane sensor. Poly(vinyl chloride) (PVC) based membranes of PMPT with potassium tetrakis (p‐chlorophenyl) borate (KTpClPB) as an anionic excluder and oleic acid (OA), dibutyl phthalate (DBP), benzyl acetate (BA) and o‐nitrophenyloctyl ether (NPOE) as plasticizing solvent mediators were constructed and investigated as La(III) membrane sensors. A membrane composed of PMPT‐PVC‐KTpClPB‐BA with the ratio 8.0 : 35.0 : 3.0 : 54.0 works well over a very wide concentration range (4.0×10^?8 to 1.0×10^?1 M) with a Nernstian slope of 19.6±0.2 mV per decade of activity between pH values of 4.0 and 9.0. The detection limit of the sensor was calculated to be 2.0×10^?8 M (ca. 3.0 ppb). The sensor displays very good discrimination toward La(III) ions with regard to most common metal ions and lanthanide ions. The proposed sensor shows a short response time for whole concentration range (ca. 12 s). For evaluation of the analytical applicability of the La(III) sensor, it was successfully used as an indicator electrode for the titration of La(III) ions with EDTA. It was also applied to the determination of fluoride content of two mouth wash preparation samples and monitoring of La(III) ions in some binary and ternary mixtures.     

A Convenient Approach To Synthesize o‐Carborane‐Functionalized Phosphorescent Iridium(III) Complexes for Endocellular Hypoxia Imaging

The structure–property relationship of carborane‐modified iridium(III) complexes was investigated. Firstly, an efficient approach for the synthesis of o‐carborane‐containing pyridine ligands a – f in high yields was developed by utilizing stable and cheap B₁₀H₁₀(Et₄N)₂ as the starting material. By using these ligands, iridium(III) complexes I – VII were efficiently prepared. In combination with DFT calculations, the photophysical and electrochemical properties of these complexes were studied. The hydrophilic nido‐o‐carborane‐based iridium(III) complex VII showed the highest phosphorescence efficiency (abs. =0.48) among known water‐soluble homoleptic cyclometalated iridium(III) complexes and long emission lifetime (τ=1.24 μs) in aqueous solution. Both of them are sensitive to O₂, and thus endocellular hypoxia imaging of complex VII was realized by time‐resolved luminescence imaging (TRLI). This is the first example of applying TRLI in endocellular oxygen detection with a water‐soluble nido‐carborane functionalized iridium(III) complex.     

Highly Emissive Diborylphenylene‐Containing Bis(phenylethynyl)benzenes: Structure–Photophysical Property Correlations and Fluoride Ion Sensing

A series of 2,5‐bis(dimesitylboryl)‐1,4‐bis(arylethynyl)benzenes 1 – 6 that contain various p‐substituents on the terminal benzene rings, including NPh₂ ( 1 ), OMe ( 2 ), Me ( 3 ), H ( 4 ), CF₃ ( 5 ), and CN ( 6 ) groups, were synthesized, and the effects of the p‐substituents on the absorption and fluorescence properties were investigated both in solution and in the solid state. Linear relationships were obtained not only between the Hammett σ_p⁺ constants of the p‐substituents and the absorption and fluorescence maxima, quantum yields, and excited‐state dynamics parameters in solution, but also between the σ_p⁺ constants and the fluorescence quantum yields in the solid state. An important finding extracted from these results is that the suppressed fluorescence quenching in the solid state is a common feature for the present laterally boryl‐substituted π‐conjugated skeletons. Hence, the diborylphenylene can serve as a useful core unit to develop highly emissive organic solids. In fact, most of the derivatives showed more intense emission in the solid state than in solution. In addition to these studies, the titration experiment of 1 by the addition of nBu₄NF was conducted, which showed the stepwise bindings of two fluoride ions with high association constants as well as a drastic change in the fluorescence spectra, while constantly maintaining high quantum yields (0.61–0.76), irrespective of the binding modes. This result also demonstrated the potential utility of the present molecules as an efficient fluorescent fluoride ion sensor.     

Hypervalent Iodine(III) Mediated Synthesis of 2‐Substituted‐5‐Aryloxazoles

A direct and efficient method for the preparation of 2‐substituted‐5‐aryloxazoles was realized by reaction of aryl methyl ketones with various nitriles in the presence of phenyliodine(III) triflate.     

4‐Aryl‐3,5‐bis(arylethynyl)aryl‐4H‐1,2,4‐triazoles: Multitasking Skeleton as a Self‐Assembling Unit

The synthesis of a series of 4‐aryl‐3,5‐bis(arylethynyl)aryl‐4H‐1,2,4‐triazoles derivatives is reported and the influence exerted by peripheral substitution on the morphology of the aggregates generated from these 1,2,4‐triazoles is investigated by SEM imaging. The presence of paraffinic side chains results in long fibrillar supramolecular structures, but unsubstituted triazoles self‐assemble into thinner ribbons and needle‐like aggregates. The crystals obtained from methoxy‐substituted triazoles have been utilised to elaborate a model that helps to justify aggregation of the investigated 1,2,4‐triazoles, in which the operation of arrays of C?H???π non‐covalent interactions plays a significant role. The results presented herein demonstrate the ability of simple molecules to behave as multitasking scaffolds with different properties, depending on peripheral substitution. Thus, although 1,2,4‐triazoles without long paraffinic side chains exhibit optical waveguiding behaviour, triazoles endowed with peripheral paraffinic side chains exhibit hexagonal columnar mesomorphism.     

A Highly Asymmetric Gold(III) η3‐Allyl Complex

A highly asymmetric Au^III η³‐allyl complex has been generated by treating Au(η¹‐allyl)Br(tpy) (tpy=2‐(p‐tolyl)pyridine) with AgNTf₂. The resulting η³‐allyl complex has been characterized by NMR spectroscopy and X‐ray crystallography. DFT calculations and variable temperature ¹H NMR suggest that the allyl ligand is highly fluxional.     

Phenyliodine(III) Triflate Mediated Synthesis of 5‐Benzoyldihydro‐2(3H)‐furanones

A direct and efficient method for the preparation of 5‐benzoyldihydro‐2(3H)‐furanones was realized by cyclization of 4‐benzoylbutyric acids in the presence of phenyliodine(III) triflate.