Three‐Component One‐Pot Synthesis of Indeno[2′,1′:5,6]Pyrido[2,3‐d]Pyrazole Derivatives in Aqueous Media

A series of indeno[2′,1′:5,6]pyrido[2,3‐d]pyrazoles was synthesized by the three‐component reaction of aldehyde, 5‐amino‐3‐methyl‐1‐phenylpyrazole and 1,3‐indenedione in the presence of SDS in aqueous media. The structures were characterized by IR, ¹H NMR, high resolution mass spectra and were further confirmed by X‐ray diffraction analysis.     

Studies with Polyfunctionally Substituted Heterocycles: New Synthesis of Pyrido[5′, 4′:2,3][1,3,4]oxadiazolo[3,2-a]pyridine; Pyridazine; 1,3,4-Oxadiazote; and Pyrazolo[1,5-a]Pyrimidine Derivatives

Cyanoacetohydrazide 1a reacts with 2-arylhydrazoketons 2a,b and 3a,b in refluxing ethanol to yield pyrido[5′,4′:2,3][1,3,4]oxadiazolo[3,2-a]pyridine and pyridazine derivatives; in the absence of solvent pyrazolo[1,5-a]pyrimidine derivatives were obtained. The reaction of 2a,b and 3a,b will) benzoylhydrazine afforded 1,3,4-oxadiazole and pyrazole derivatives.     

Synthesis of Certain 3-Aminopyrazolo[5,4-b]pyridine and 3,4-Substituted Pyrido[2′,3′：3,4]pyrazolo[5,1-c][1,2,4]triazine Derivatives

2-Thioxo-1,2-dihydropyridine derivatives 2a, 2b were reacted with methyl iodide to give 2-methylthiopyridines 3a, 3b, which were reacted with hydrazine hydrate to produce 3-aminopyrazolo[5,4-b]pyridines 4a, 4b. Compounds 4a, 4b were diazotized to afford the corresponding diazonium salts 5a, 5b, which were reacted with some active methylene compounds 6a-6h to give the corresponding pyrido[2′,3′ ： 3,4]pyrazole[5,1-c][1,2,4]triazines 7-14.     

Iodine‐Catalyzed Synthesis of Spiro[1,3,4‐benzotriazepine‐2,3′‐indole]‐2′,5(1H,1′H)‐diones under Mild Conditions

The I₂‐catalyzed preparation of spiro[1,3,4‐benzotriazepine‐2,3′‐indole]‐2′,5(1H,1′H)‐diones from 2‐aminobenzohydrazide and isatins in MeCN at room temperature in good‐to‐excellent yields is described. The structure of 3 was corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS data). A plausible mechanism for this type of reaction is proposed (Scheme 2).     

Synthesis,Characterization and Reactions of 4‐Hydrazino‐2‐methylpyrimidino[4′5′:4,5]thiazolo[3,2‐a]benzimidazole

4‐Hydrazino‐2‐methylpyrimidino[4′,5′:4,5]thiazolo[3,2‐a]benzimidazole ( 4 ) was obtained from hydrazinolysis of the 4‐chloro derivative 3 with hydrazine hydrate. The hydrazino derivative 4 was further cyclized to the corresponding pyrazole 5 , pyrazolone 6 and 5‐methyl‐1,2,4‐triazolo[1″,5″:3′,4′]pyrimidino[5′,6′:5,4]‐thiazolo[3,2‐a]benzimidazole ( 9 ) and 5‐methy‐1,2,4‐triazolo[4″,3″:3′,4′]pyrimidino[5′,6′:5,4]thiazolo‐[3,2‐a]benzimidazole ( 10 ), respectively. The triazolo derivative 10 was isomerized to the triazolo derivative 9 under a variety of reaction conditions.     

A Novel,One‐Pot Four‐Component Route to 2′‐Thioxo‐2′,3′‐dihydrospiro[indole‐3,6′‐[1,3]thiazin]‐2‐one Derivatives

An efficient route to 2′,3′‐dihydro‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives is described. It involves the reaction of isatine, 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one, and different amines in the presence of CS₂ in dry MeOH at reflux (Scheme 1). The alkyl carbamodithioate, which results from the addition of the amine to CS₂, is added to the α,β‐unsaturated ketone, resulting from the reaction between 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one and isatine, to produce the 3′‐alkyl‐2′,3′‐dihydro‐4′‐phenyl‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives in excellent yields (Scheme 2). Their structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses.     

Highly Fluorescent Conjugated Copolymers Containing Dithieno[3,2‐b:2′,3′‐d]pyrrole

Three copolymers that incorporate dithieno[3,2‐b:2′,3′‐d]pyrrole with fluorene, carbazole, or pyridine have been prepared by Suzuki reaction and characterized by NMR spectroscopy and GPC. A new homopolymer of dithieno[3,2‐b:2′,3′‐d]pyrrole was also synthesized for the comparison of their structure–property relationships. Their thermal, optical, and electrochemical properties have been investigated. All the polymers exhibit good thermal stability with decomposition temperatures around 400 °C. The fluorescence quantum efficiencies of all these polymers in solution are in the range of 33.5–55.5%. The copolymers also show high film fluorescence quantum efficiencies of about 20% while the fluorescence of the homopolymer film is almost quenched.

     

Synthesis of Some New Imidazo[4,5-B]Pyridine Derivatives Using 2-Cyanomethyl-1-Methyl-1H-Imidazo[4,5-B]Pyridine

Abstract

The reactions of 2-cyanomethyl-1-methyl-1H-imidazo[4,5-b]pyridine with isothiocyanates, nitroso compounds, acid chlorides, and thioglycolic acid were investigated. New imidazo[4,5-b]pyridine derivatives with various substituents in 2-position and derivatives of the new pyrrolo[2′,1′:2,3]imidazo[4,5-b]pyridine ring system were synthesized. The compounds obtained were tested in vitro for their tuberculostatic activity.     

氨基磺酸催化下三组分一锅法无溶剂合成苯并[4,5]咪唑并[1,2-a]嘧啶类衍生物

无溶剂条件下,用氨基磺酸催化芳香醛,2-氨基苯并咪唑和β-二羰基化合物的三组分反应,简单而方便地得到了苯并[4,5]咪唑并[1,2-a]嘧啶类衍生物.该法具有产率高,成本低廉,环境友好,适应性广简捷方便等优点.     

Synthesis and photovoltaic investigation of dithieno[2,3‐d:2′,3′‐d′]‐benzo[1,2‐b:3,4‐b′:5,6‐d″]trithiophene‐based conjugated polymer with an enlarged π‐conjugated system

Compared with benzo[1,2‐b:3,4‐b′:5,6‐d″]trithiophene (BTT), an extended π‐conjugation fused ring derivative, dithieno[2,3‐d:2′,3′‐d′]benzo[1,2‐b:3,4‐b′:5,6‐d″]trithiophene (DTBTT) has been designed and synthesized successfully. For investigating the effect of extending conjugation, two wide‐bandgap (WBG) benzo[1,2‐b:4,5‐b′]dithiophene (BDT)‐based conjugated polymers (CPs), PBDT‐DTBTT, and PBDT‐BTT, which were coupled between alkylthienyl‐substituted benzo[1,2‐b:4,5‐b′]dithiophene bistin (BDT‐TSn) and the weaker electron‐deficient dibromides DTBTTBr₂ and BTTBr₂ bearing alkylacyl group, were prepared. The comparison result revealed that the extending of conjugated length and enlarging of conjugated planarity in DTBTT unit endowed the polymer with a wider and stronger absorption, more ordered molecular structure, more planar and larger molecular configuration, and thus higher hole mobility in spite of raised highest occupied molecular orbital (HOMO) energy level. The best photovoltaic devices exhibited that PBDT‐DTBTT/PC₇₁BM showed the power conversion efficiency (PCE) of 2.73% with an open‐circuit voltage (V_OC) of 0.82 V, short‐circuit current density (J_SC) of 6.29 mA cm^?2, and fill factor (FF) of 52.45%, whereas control PBDT‐BTT/PC₇₁BM exhibited a PCE of 1.98% under the same experimental conditions. The 38% enhanced PCE was mainly benefited from improved absorption, and enhanced hole mobility after the conjugated system was extended from BTT to DTBTT. Therefore, our results demonstrated that extending the π‐conjugated system of donor polymer backbone was an effective strategy of tuning optical electronic property and promoting the photovoltaic property in design of WBG donor materials.     

Quantum chemical studies on prototautomerism of 1H‐imidazo[4,5‐c]pyridine

The structural features of the 1H‐imidazo[4,5‐c]pyridine (ICPY) tautomers and homodimers of the most stable tautomers have been studied by quantum chemical methods. FTIR and Raman spectra of the ICPY were recorded in the range of 4000–60 cm^?1 and 3500–5 cm^?1. The predominant tautomer among four possible isomers of ICPY were determined. The optimized geometries and vibrational frequencies of possible ICPY tautomers and dimers were computed by B3LYP/DFT method with 6‐311++G(d,p) and 6‐31G(d) basis sets. All vibrational frequencies assigned in detail with the help of total energy distribution (TED) and isotopic shifts. ICPY dimeric forms were also characterized according to their hydrogen bonding interactions, and it has been found that the most stable ICPY homodimer establishes moderate strong N ? H …N type hydrogen bond. ¹H NMR, ¹³C NMR, and ¹⁵N NMR properties have been calculated for all tautomeric forms using the gauge independent atomic orbital (GIAO) method. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

One pot synthesis of ethyl carboxylate and acetyl selenolo[2,3-b]quinoline derivatives and their tetra/pentacyclic systems

Abstract

Ethylcarboxylate and acetyl selenoloquinoline derivatives were prepared in a one pot synthesis via reaction of sodium hydrogen selenide and 2-chloro-3-cyano-4-methylquinoline followed by reactions with ethyl chloroacetate and chloro acetone respectively which used as precursors to synthesize many of tetra and pentacyclic systems. A new series of pyrimido [4′,5′:4,5]selenolo[2,3-b]quinoline, thiazino[2’,3’:4,5]selenolo[2,3-b]quinoline, oxazino[2',3':4,5]selenolo[3,2-b]quinoline, pyrido[2′,3′:4,5]selenolo[2,3-b]quinoline, pyrido[2′,3′:4,5]selenolo[2,3-b]quinoline-2-substituted selenyl and selenolo[2′,3′:5,6]pyrido[2″,3″:4,5]selenolo[2,3-b]quinoline derivatives were prepared. Elemental analysis, IR, ¹H NMR, ¹³ Abdel-Hafez, S. H.; Gobouri, A. A.; Alshanbari, N. A.; Gad El-Rab, S. M. F. Synthesis of Novel Vitamin E Containing Sulfa Drug Derivatives and Study Their Anti-Bacterial Activity. Med. Chem. Res. 2018, 27, 2341–2352. DOI: 10.1007/s00044-018-2240-7.[Crossref], [Web of Science ®] , [Google Scholar]C NMR and mass spectra confirmed the structures of the newly synthesized compounds.     

One‐dimensional CuII coordination polymers containing C2h‐symmetric 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate linkers

Two new one‐dimensional Cu^II coordination polymers (CPs) containing the C_2h‐symmetric terphenyl‐based dicarboxylate linker 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate (3,3′‐TPDC), namely catena‐poly[[bis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ⁴O,O′:O′′:O′′′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂]·H₂O}_n, (I), and catena‐poly[[aquabis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ²O³:O^3′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂(H₂O)]·H₂O}_n, (II), were both obtained from two different methods of preparation: one reaction was performed in the presence of 1,4‐diazabicyclo[2.2.2]octane (DABCO) as a potential pillar ligand and the other was carried out in the absence of the DABCO pillar. Both reactions afforded crystals of different colours, i.e. violet plates for (I) and blue needles for (II), both of which were analysed by X‐ray crystallography. The 3,3′‐TPDC bridging ligands coordinate the Cu^II ions in asymmetric chelating modes in (I) and in monodenate binding modes in (II), forming one‐dimensional chains in each case. Both coordination polymers contain two coordinated dimethylamine ligands in mutually trans positions, and there is an additional aqua ligand in (II). The solvent water molecules are involved in hydrogen bonds between the one‐dimensional coordination polymer chains, forming a two‐dimensional network in (I) and a three‐dimensional network in (II).     

Dithieno[3,2‐b:2′,3′‐d]pyrrole Cored p‐Type Semiconductors Enabling 20 % Efficiency Dopant‐Free Perovskite Solar Cells

Organic p‐type semiconductors with tunable structures offer great opportunities for hybrid perovskite solar cells (PVSCs). We report herein two dithieno[3,2‐b:2′,3′‐d]pyrrole (DTP) cored molecular semiconductors prepared through π‐conjugation extension and an N‐alkylation strategy. The as‐prepared conjugated molecules exhibit a highest occupied molecular orbital (HOMO) level of ?4.82 eV and a hole mobility up to 2.16×10^?4 cm² V^?1 s^?1. Together with excellent film‐forming and over 99 % photoluminescence quenching efficiency on perovskite, the DTP based semiconductors work efficiently as hole‐transporting materials (HTMs) for n‐i‐p structured PVSCs. Their dopant‐free MA_0.7FA_0.3PbI_2.85Br_0.15 devices exhibit a power conversion efficiency over 20 %, representing one of the highest values for un‐doped molecular HTMs based PVSCs. This work demonstrates the great potential of using a DTP core in designing efficient semiconductors for dopant‐free PVSCs.     

Synthesis of Pyrazolo‐[4́,3́:5,6]pyrido[2,3‐d]pyrimidine‐diones Catalyzed by a Nano‐sized Surface‐Grafted Neodymium Complex of the Tungstosilicate via Multicomponent Reaction

An inorganic–organic hybrid based on lanthanide clusters and Keggin type polyoxometalates (POMs) (Na[Nd (pydc‐OH)(H₂O)₄]₃}[SiW₁₂O₄₀]) was used the first time as trinuclear catalyst for one pot synthesis of pyrazolo[4??,3?:5,6]pyrido[2,3‐d]pyrimidine‐diones, via two different four and five‐component reactions involving hydrazine hydrate, ethyl acetoacetate, aryl aldehydes, and 6‐amino‐1,3‐dimethyl uracil or barbituric acid with ammonium acetate as alternative materials in green condition. To evaluate potential application of the as‐made hybrid in adsorption and separation processes, nitrogen adsorption was performed at 77 K through simulation study. The hybrid catalyst was further characterized via powder X‐ray diffraction (PXRD) at room temperature which indicated the good phase purity of the catalyst. The results show that the catalytic activity of the hybrid catalyst has increased relative to each parent component due to the special interaction between Keggin anions and pydc‐OH ligands.     

Synthesis and antituberculotic activity of some new imidazo[4,5-b]pyridine derivatives

The reactions of 2-acetylimidazo[4,5-b]pyridine hydrazone with some alkyl-and arylisothiocyanates and some orthoesters were carried out. Various new derivatives of the titled compound such as thiosemicarbazones, ethoxymethylenehydrazones, and derivatives of the new pyrido-[3′,2′:4,5]imidazo[1,2-d][1,2,4]triazine ring system were obtained. Biological data for selected compounds are presented. Published in Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1571–1579, October, 2006.     

Synthesis and Properties of Derivatives of the new Heterocyclic System Benz[4,5]imidazo[1,2-c]pyrido[3',2';4,5]thieno[2,3-e]pyrimidine

Derivatives of a new heterocyclic system - benz[4,5]imidazo[1,2-c]pyrido[3',2';4,5]thieno[2,3-e]pyrimidine have been obtained by successive reactions in three stages - alkylation of 3-cyanopyridine-2(1H)-thiones with 2-chloromethylbenzylimidazole to give 2-benzimidazolylmethylthio-3-cyanopyridines, closing the thiophene ring in the latter to form 3-amino-2-(benzimidazolyl-2)thieno[2,3-b]pyridines, and cyclization of the pyrimidine ring by acylation with carboxylic acid anhydrides or chlorides.     

A Fluorescent Chemosensor for Dihydrogen Phosphate Ion Based on 2‐[2‐Hydroxy‐4‐(diethylamino) phenyl]‐1H‐imidazo[4,5‐b]phenazine‐Fe3+ Ensemble

A long wavelength emission fluorescent (612 nm) chemosensor with high selectivity for H₂PO₄^? ions was designed and synthesized according to the excited state intramolecular proton transfer (ESIPT). The sensor can exist in two tautomeric forms ('keto' and 'enol') in the presence of Fe³⁺ ion, Fe³⁺ may bind with the 'keto' form of the sensor. Furthermore, the in situ generated GY‐Fe³⁺ ensemble could recover the quenched fluorescence upon the addition of H₂PO₄^? anion resulting in an off‐on‐type sensing with a detection limit of micromolar range in the same medium, and other anions, including F^?, Cl^?, Br^?, I^?, AcO^?, HSO₄^?, ClO₄^? and CN^? had nearly no influence on the probing behavior. The test strips based on 2‐[2‐hydroxy‐4‐(diethylamino) phenyl]‐1H‐imidazo[4,5‐b]phenazine and Fe³⁺ metal complex ( GY‐Fe³⁺ ) were fabricated, which could act as convenient and efficient H₂PO₄^? test kits.