A novel ratiometric sensor for the fast detection of palladium species with large red-shift and high resolution both in aqueous solution and solid state

A highly selective fluorescent probe (OHBT) was designed and synthesized by linking the ESIPT fluorophore N-(3-(benzo[d]thiazol-2-yl)-4-(hydroxyphenyl) benzamide) (HBTBC) to the palladium specificity response group, allyl group, for the detection of palladium species in aqueous solution. The allyl group can be hydrolyzed by Pd⁰ species through the Pd⁰-catalyzed Tsuji–Trost reaction and thus release the fluorophore HBTBC, which shows two emission bands. The maximum emission spectra originated from the enol and keto forms at 415 and 555 nm respectively and with no overlap, which implies the high resolution of the palladium detection. The palladium species can also be detected by paper strip because of the solid-state fluorescence of probe HOBT catalyzed by palladium. This method was successfully applied in the palladium related Suzuki–Miyaura coupling reaction and the detection limit is lower than 1 μM.     

A Highly Sensitive Fluorescent Sensor for Palladium and Direct Imaging of Its Ecotoxicity in Living Model Organisms

Rhodamine is an ideal platform for fluorescence probes owing to its spiro‐lactam framework and excellent photochemical properties. Herein, a novel rhodamine‐based palladium fluorescent chemosensor, Rd‐Eb , showing a fast response time (3 min), high sensitivity for palladium species over other ions, and a low detection limit (1.91×10^?7 m ), was synthesized. It can act as an obvious colorimetric as well as a fluorescent “off/on” sensor for Pd²⁺. In addition, it is also an excellent sensor for in vivo imaging of Pd²⁺ in zebra fish and Daphnia magna, illuminating the impact of palladium on organisms at different growth stages with respect to biological toxicology.     

A specific and selective chemiluminescent probe for Pd2+ detection

A modified 1,2-dioxetane is reported as a chemiluminescent imaging (CLI) approach for monitoring palladium(Ⅱ).     

Revealing the Dynamic Structure of Complex Solid Catalysts Using Modulated Excitation X‐ray Diffraction

X‐ray diffraction (XRD) is typically silent towards information on low loadings of precious metals on solid catalysts because of their finely dispersed nature. When combined with a concentration modulation approach, time‐resolved high‐energy XRD is able to provide the detailed redox dynamics of palladium nanoparticles with a diameter of 2 nm in 2 wt % Pd/CZ (CZ=ceria–zirconia), which is a difficult sample for extended X‐ray absorption fine structure (EXAFS) measurements because of the cerium component. The temporal evolution of the Pd(111) and Ce(111) reflections together with surface information from synchronous diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) measurements reveals that Ce maintains Pd oxidized in the CO pulse, whereas reduction is detected at the beginning of the O₂ pulse. Oxygen is likely transferred from Pd to Ce³⁺ before the onset of Pd re‐oxidation. In this context, adsorbed carbonates appear to be the rate‐limiting species for re‐oxidation.     

Analytical application of arsenazo III to the spectrophotometric determination of palladium: Preliminary investigation of the complex formation in the arsenazo III-Pd (II)--H2O system

The reaction of arsenazo III with palladium(II) was investigated. Complex species of types M₂L and ML are formed at pH 2–4; the complex M₂L shows a very sharp maximum at 630 nm while the ML species shows maximum absorption at 620 nm. The molar absorptivities of the complexes are 4.2(±0.1) · 10⁴ and 1.6(±0.2) · 10⁴ respectively. The complex ML conforms to Beer's law at 620 nm in the range 10–250 μg Pd(II)/50 ml. The sensitivity of the reaction of Pd(II) with arsenazo III is about the same as that of a new reagent, palladiazo, but the latter is more selective for Pd(II). Serious interferences might be caused by UO₂²⁺, U⁴⁺, Th⁴⁺, Cu²⁺, Ni²⁺, Co²⁺, Y³⁺ and the rare-earth elements.     

Highly efficient polymer‐stabilized palladium heterogeneous catalyst: Synthesis,characterization and application for Suzuki–Miyaura and Mizoroki–Heck coupling reactions

A suitable approach to stabilize palladium nanoparticles (Pd NPs), with an average diameter of 3–4 nm, on magnetic polymer is described. A new magnetic polymer containing 4′‐(4‐hydroxyphenyl)‐2,2′:6′,2″‐terpyridine (HPTPy) ligand was prepared by the polymerization of itaconic acid (ITC) as a monomer and trimethylolpropane triacrylate (TMPTA) as a cross‐linker and fully characterized. Pd NPs embedded on the magnetic polymer were successfully applied in Suzuki–Miyaura and Mizoroki–Heck coupling reactions under low palladium loading conditions, and provided the corresponding products with excellent yields (up to 98%) and high catalytic activities (TOF up to 257 hr^?1). Also, the catalyst can be easily separated and reused for at least consecutive five times with a small drop in catalytic activity.     

BODIPY based fluorescent turn-on sensor for highly selective detection of HNO and the application in living cells

On the basis of BODIPY platform, a terpyridyl-substituent BODIPY-Copper complex (Cu(II)-BTPY) was rationally designed and synthesized as a redox reaction fluorescent sensor for detecting HNO over reactive oxygen species (ROS) and reactive nitrogen species (RNS) with impressive selectivity in living cells under mild and neutral conditions. The BTPY exhibits relatively high fluorescence quantum efficiency as much as 34.8% and presents large stokes shift, about 62 nm. When a series of transition metal ions were exploited to investigate the fluorescence quench towards BTPY, copper ion (Cu²⁺) gave the optimal result. After the fluorescence of the probe being effectively quenched in the presence of Cu²⁺, it can be in turn recovered through the reduction of Cu²⁺ into Cu⁺ by HNO accompanying with a visually observable fluorescence response. Still, the sensing mechanism was evidently confirmed by EPR and ESI-MS measurement. In addition, the employment of BTPY for imaging dyes was also presented in vivo.     

Formation of low-valence palladium species in the course of oxidation of alcohols with palladium(II) tetraaqua complex

The formation of low-valence palladium species Pd _n ²⁺ (n ≥ 2) in the course of oxidation of aliphatic C₁-C₄ alcohols with oxygen in the presence of palladium(II) tetraaqua complex in aqueous solution was proved UV-spectrophotometrically by the absorption band with a maximum at 312 or 316 nm depending on particular alcohol.     

The extractive spectrophotometric determination of palladium(ii) as the mixed-ligand complex with picolinealdehyde-2-hydroxy-5-phenylanil and chloride ion

The extraction of palladium(II) with chloroform in the presence of PHPA and chloride ions is described. The extracted species has an absorption maximum at 627 nm, and Beer's law is obeyed over the range 10–200 μg of palladium. The molar absorptivity is 4.90·10³ l mol^?1 cm^?1 at 627 nm. The 1:1:1 Pd(PHPA)-Cl complex is extracted from aqueous solution. The effect of foreign ions on the determination of palladium(II) is examined.     

Electrochemical synthesis of nanocomposite of palladium nanoparticles with polymer viologen-containing nanocapsule

An efficient mediated electrosynthesis of the spherical (85 nm) nanocomposite material Pd@p(MVCA⁸⁺-co-St) was carried out in an aqueous medium. Ultrasmall palladium nanoparticles (3—8 nm) are stabilized in nanocapsules of water-soluble nanoparticles of the copolymer p(MVCA⁸⁺-co-St) consisting of tetraviologen calix[4]resorcinol (MVCA⁸⁺) with styrene (St). The role of the mediator is played by viologen units of a polymer nanoparticle at potentials of the MV²⁺/MV^?+ redox couple. The high catalytic activity of the nanocomposite material in the reduction of nitrophenol with sodium borohydride is shown.     

A fluorescent probe for the discrimination of oxidation states of palladium

Palladium-based catalysts are widely used in pharmaceutical industries, which can sometimes cause palladium contamination in pharmaceutical drug manufacture. It is important to separately quantify the different oxidation states of palladium (Pd⁰ and Pd²⁺) in pharmaceuticals as they react with scavengers differently. Although palladium sensors have been under intense investigation, oxidation state differentiators are very rare. Here, we report a simple porphyrin–coumarin conjugate, PPIX-L2, that can selectively discriminate between the oxidation states of palladium. The reaction of PPIX-L2 with Pd⁰ showed a 24-fold fluorescence increase of the coumarin emission, meanwhile, the presence of Pd²⁺ led to a 98% quenching of the porphyrin emission. Fluorescent responses of PPIX-L2 towards Pd⁰ and Pd²⁺ are specific, and its sensitivity towards both palladium species is significantly increased with a detection limit of 75 nM and 382 nM for Pd⁰ and Pd²⁺ respectively.

A simple porphyrin–coumarin conjugate PPIX-L2 was developed for the discrimination of different oxidation states of palladium (Pd⁰ and Pd²⁺), and with a significantly improved sensitivity.     

Detection of nickel in fish organs with a two-photon fluorescent probe

Molecular imaging by two‐photon microscopy (TPM) has become indispensable to the study of biology/medicine owing to its capability of imaging deep inside intact tissues. To make TPM a more‐versatile tool, a large variety of two‐photon probes are needed. Herein, we report a new two‐photon fluorescent probe (ANi2) that can be excited by 750 nm femtosecond pulses and detect Ni²⁺ ions in fresh fish organs at 90–175 μm depth without interference from the pH value or from other biologically relevant species through the use of TPM. TPM images of fish organs labeled with ANi2 revealed that Ni²⁺ ions accumulate in fish organs in the order: kidney > heart > gill ≥ liver. Moreover, a linear relationship was found between the two‐photon‐excited fluorescence (TPEF) and the inductively coupled plasma mass spectrometry intensities (ICP‐MS), thereby allowing the quantitative measurement of Ni²⁺ ions in live tissue.     

High-Affinity Ratiometric Fluorescence Probe Based on 6-Amino-2,2′-Bipyridine Scaffold for Endogenous Zn2+ and Its Application to Living Cells

Zinc is an essential trace element involved in many biological activities; however, its functions are not fully understood. To elucidate the role of endogenous labile Zn²⁺, we developed a novel ratiometric fluorescence probe, 5-(4-methoxyphenyl)-4-(methylsulfanyl)-[2,2′-bipyridin]-6-amine (6 (rBpyZ)) based on the 6-amino-2,2′-bipyridine scaffold, which acts as both the chelating agent for Zn²⁺ and the fluorescent moiety. The methoxy group acted as an electron donor, enabling the intramolecular charge transfer state of 6 (rBpyZ), and a ratiometric fluorescence response consisting of a decrease at the emission wavelength of 438 nm and a corresponding increase at the emission wavelength of 465 nm was observed. The ratiometric probe 6 (rBpyZ) exhibited a nanomolar-level dissociation constant (K_d = 0.77 nM), a large Stokes shift (139 nm), and an excellent detection limit (0.10 nM) under physiological conditions. Moreover, fluorescence imaging using A549 human lung adenocarcinoma cells revealed that 6 (rBpyZ) had good cell membrane permeability and could clearly visualize endogenous labile Zn²⁺. These results suggest that the ratiometric fluorescence probe 6 (rBpyZ) has considerable potential as a valuable tool for understanding the role of Zn²⁺ in living systems.     

Toward a highly sensitive and selective indole-rhodamine-based light-up probe for Hg2+ and its application in living cells

We herein designed and synthesized a light-up fluorescent probe L1 for Hg²⁺ species, which is based on indole derivative and Rhodamine fluorophore. The new probe can show a linear response to Hg²⁺ with high sensitivity and selectivity. As the Hg²⁺ concentration changed from 0 to 450 μM, the fluorescence intensity of L1 at 575 nm changed from 50 to 6181 (～120-fold). The detection limit of the probe was 5.0 × 10^?8 M. Besides, we have successfully applied L1 to monitor Hg²⁺ species in living MCF-7 cells by way of fluorescence imaging.     

Porous polymer supported palladium catalyst for cross coupling reactions with high activity and recyclability

Porous polymer supported palladium catalyst for cross coupling reactions with high activity has been successfully prepared by coordination of Pd 2+ species with Schiff bases functionalized porous polymer. The catalyst has been systemically investi-gated by a series of characterizations such as TEM, N 2 adsorption, NMR, IR, XPS, etc. TEM and N 2 isotherms show that the sample maintains the nanoporous structure after the modification and coordination. XPS results show that chemical state of palladium species in the catalyst is mainly +2. More importantly, the catalyst shows very high activities and excellent recycla-bility in a series of coupling reactions including Suzuki, Sonogashira, and Heck reactions. Hot filtration and poison of catalysts experiments have also been performed and the results indicate that soluble active species (mainly Pd(0) species) in-situ gener-ated from the catalyst under the reaction conditions are the active intermediates, which would redeposit to the supporter after the reactions.     

Ultrafast studies of gold, nickel, and palladium nanorods

Steady state and ultrafast transient absorption studies have been carried out for gold, nickel, and palladium high aspect ratio nanorods. For each metal, nanorods were fabricated by electrochemical deposition into approximately 6 microm thick polycarbonate templates. Two nominal pore diameters(10 and 30 nm, resulting in nanorod diameters of about 40 and 60 nm, respectively) were used, yielding nanorods with high aspect ratios (>25). Static spectra of nanorods of all three metals reveal both a longitudinal surface plasmon resonance (SPR(L)) band in the mid-infrared as well as a transverse band in the visible for the gold and larger diameter nickel and palladium nanorods. The appearance of SPR(L) bands in the infrared for high aspect ratio metal nanorods and the trends in their maxima for the different aspect ratios and metals are consistent with calculations based on the Gans theory. For the gold and nickel samples, time resolved studies were performed with a subpicosecond resolution using 400 nm excitation and a wide range of probe wavelengths from the visible to the mid-IR as well as for infrared excitation (near 2000 cm(-1)) probed at 800 nm. The dynamics observed for nanorods of both metals and both diameters include transients due to electron-phonon coupling and impulsively excited coherent acoustic breathing mode oscillations, which are similar to those previously reported for spherical and smaller rod-shaped gold nanoparticles. The dynamics we observe are the same within the experimental uncertainty for 400 nm and infrared (5 microm) excitation probed at 800 nm. The transient absorption using 400 nm excitation and 800 nm probe pulses of the palladium nanorods also reveal coherent acoustic oscillations. The results demonstrate that the dynamics for high aspect ratio metal nanorods are similar to those for smaller nanoparticles.     

Synthesis,characterization, and electroluminescence of novel copolyfluorenes and their applications in white light emission

New copolyfluorenes (PC8OF0–PC8OF50) comprised of 9,9‐dioctylfluorene and jacketed units 2,5‐bis[(5‐octyloxy‐phenyl)‐1,3,4‐ oxadiazole]‐1‐(3,5‐dibromophenyl)‐benzene (35C8) were synthesized by palladium‐catalyzed Suzuki coupling reaction. They were characterized by molecular weight determination, ¹H NMR, elemental analysis, DSC, TGA, absorption and emission spectroscopy, and cyclic voltammetry (CV). These copolymers were readily soluble in common organic solvents and exhibited high glass transition temperature and thermal stability.The copolymer films showed absorption peaks from 381 nm to 351 nm, and PL peaks from 432 nm to 421 nm with a blue shift originated from 35C8 units. Both the HOMO energy levels and LUMO levels changed little as the content of 35C8 units increased (?5.59 eV to ?5.48 eV and ?2.60 eV to ?2.49 eV). Electroluminescent devices: ITO/PEDOT:PSS[poly(ethylenedioxythiophene):polystyrenesulfonate]/polymer/Ca (25 nm)/Ag(80 nm) (a), ITO/PEDOT:PSS/polymer/TPBI [1,3,5‐ tris(N‐phenylbenzimidazol‐2‐yl)benzene](15 nm)/Mg:Ag(10:1, wt)/Ag (b), and ITO/ PEDOT:PSS/PVK[Poly(N‐vinylcarbazole)]/polymer/TPBI(15 nm)/Ca(25 nm)/Ag(80 nm) (c) were fabricated to investigate the influence of jacketed contents and device architectures on emission characteristics. The maximum brightness and current efficiency of the PC8OF25 device (5097.8 cd/m² and 0.484 cd/A) surpassed those of the PC8OF0 device (3122.8 cd/m² and 0.416 cd/A). The EL emissions of PC8OF0 – PC8OF50 were pure blue and low‐energy excimer emission bands were successfully suppressed, indicating that these copolymers could be good candidates for blue light‐emitting materials. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4555–4565, 2009     

Doubly N‐Confused Calix[6]phyrin Bis‐Organopalladium Complexes: Photostable Triplet Sensitizers for Singlet Oxygen Generation

Triplet photosensitizers that generate singlet oxygen efficiently are attractive for applications such as photodynamic therapy (PDT). Extending the absorption band to a near‐infrared (NIR) region (700 nm≈) with reasonable photostability is one of the major demands in the rational design of such sensitizers. We herein prepared a series of mono‐ and bis‐palladium complexes ( 1‐Pd‐H₂ , 2‐Pd‐H₂ , 1‐Pd‐Pd , and 2‐Pd‐Pd ) based on modified calix[6]phyrins as photosensitizers for singlet oxygen generation. These palladium complexes showed intense absorption profiles in the visible‐to‐NIR region (500–750 nm) depending on the number of central metals. Upon photoirradiation in the presence of 1,5‐dihydroxynaphthalene (DHN) as a substrate for reactive oxygen species, the bis‐palladium complexes generated singlet oxygen with high efficiency and excellent photostability. Singlet oxygen generation was confirmed from the characteristic spectral feature of the spin trapped complex in the EPR spectrum and the intact ¹O₂ emission at 1270 nm.     

Aminoquinoline based highly sensitive fluorescent sensor for lead(II) and aluminum(III) and its application in live cell imaging

We have synthesized a new probe 5-((anthracen-9-ylmethylene) amino)quinolin-10-ol (ANQ) based on anthracene platform. The probe was tested for its sensing behavior toward heavy metal ions Hg²⁺, Pb²⁺, light metal Al³⁺ ion, alkali, alkaline earth, and transition metal ions by UV–visible and fluorescent techniques in ACN/H₂O mixture buffered with HEPES (pH 7.4). It shows high selectivity toward sensing Pb²⁺/Al³⁺ metal ions. Importantly, 10-fold and 5- fold fluorescence enhancement at 429 nm was observed for probe upon complexation with Pb²⁺ and Al³⁺ ions, respectively. This fluorescence enhancement is attributable to the prevention of photoinduced electron transfer. The photonic studies indicate that the probe can be adopted as a sensitive fluorescent chemosensor for Pb²⁺ and Al³⁺ ions.     

Construction of Fluorescent Probes Via Protection/Deprotection of Functional Groups: A Ratiometric Fluorescent Probe for Cu2+

Herein a ratiometric fluorescent Cu²⁺ probe was rationally constructed in a straightforward manner with the concept of aldehyde group protection/deprotection. The probe showed a ratiometric fluorescent response to Cu²⁺ with a large emission wavelength shift (>100 nm) and displayed high selectivity for Cu²⁺ over other metal ions due to distinct deprotection conditions. In addition, a Cu²⁺‐promoted dethioacetalization mechanism was proposed.