MnO@Carbon Core–Shell Nanowires as Stable High‐Performance Anodes for Lithium‐Ion Batteries

A facile method is presented for the large‐scale preparation of rationally designed mesocrystalline MnO@carbon core–shell nanowires with a jointed appearance. The nanostructures have a unique arrangement of internally encapsulated highly oriented and interconnected MnO nanorods and graphitized carbon layers forming an external coating. Based on a comparison and analysis of the crystal structures of MnOOH, Mn₂O₃, and MnO@C, we propose a sequential topotactic transformation of the corresponding precursors to the products. Very interestingly, the individual mesoporous single‐crystalline MnO nanorods are strongly interconnected and maintain the same crystallographic orientation, which is a typical feature of mesocrystals. When tested for their applicability to Li‐ion batteries (LIB), the MnO@carbon core–shell nanowires showed excellent capacity retention, superior cycling performance, and high rate capability. Specifically, the MnO@carbon core–shell nanostructures could deliver reversible capacities as high as 801 mA h g^?1 at a high current density of 500 mA g^?1, with excellent electrochemical stability after testing over 200 cycles, indicating their potential application in LIBs. The remarkable electrochemical performance can mainly be attributed to the highly uniform carbon layer around the MnO nanowires, which is not only effective in buffering the structural strain and volume variations of anodes during repeated electrochemical reactions, but also greatly enhances the conductivity of the electrode material. Our results confirm the feasibility of using these rationally designed composite materials for practical applications. The present strategy is simple but very effective, and appears to be sufficiently versatile to be extended to other high‐capacity electrode materials with large volume variations and low electrical conductivities.     

Facile Synthesis of Ge@C Core–Shell Nanocomposites for High‐Performance Lithium Storage in Lithium‐Ion Batteries

Herein, we report a facile and “green” synthetic route for the preparation of Ge@C core–shell nanocomposites by using a low‐cost Ge precursor. Field‐emission scanning electron microscopy and transmission electron microscopy analyses confirmed the core–shell nanoarchitecture of the Ge@C nanocomposites, with particle sizes ranging from 60 to 100 nm. Individual Ge nanocrystals were coated by a continuous carbon layer, which had an average thickness of 2 nm. When applied as an anode materials for lithium‐ion batteries, the Ge@C nanocomposites exhibited a high initial discharge capacity of 1670 mAh g^?1 and superior rate capability. In particular, Ge@C nanocomposite electrodes maintained a reversible capacity of 734 mAh g^?1 after repeated cycling at a current density of 800 mA g^?1 over 100 cycles.     

Sulfur‐Impregnated Core–Shell Hierarchical Porous Carbon for Lithium–Sulfur Batteries

Core–shell hierarchical porous carbon spheres (HPCs) were synthesized by a facile hydrothermal method and used as host to incorporate sulfur. The microstructure, morphology, and specific surface areas of the resultant samples have been systematically characterized. The results indicate that most of sulfur is well dispersed over the core area of HPCs after the impregnation of sulfur. Meanwhile, the shell of HPCs with void pores is serving as a retard against the dissolution of lithium polysulfides. This structure can enhance the transport of electron and lithium ions as well as alleviate the stress caused by volume change during the charge–discharge process. The as‐prepared HPC‐sulfur (HPC‐S) composite with 65.3 wt % sulfur delivers a high specific capacity of 1397.9 mA h g^?1 at a current density of 335 mA g^?1 (0.2 C) as a cathode material for lithium–sulfur (Li‐S) batteries, and the discharge capacity of the electrode could still reach 753.2 mA h g^?1 at 6700 mA g^?1 (4 C). Moreover, the composite electrode exhibited an excellent cycling capacity of 830.5 mA h g^?1 after 200 cycles.     

A Core–Shell Fe/Fe2O3 Nanowire as a High‐Performance Anode Material for Lithium‐Ion Batteries

The preparation of novel one‐dimensional core–shell Fe/Fe₂O₃ nanowires as anodes for high‐performance lithium‐ion batteries (LIBs) is reported. The nanowires are prepared in a facile synthetic process in aqueous solution under ambient conditions with subsequent annealing treatment that could tune the capacity for lithium storage. When this hybrid is used as an anode material for LIBs, the outer Fe₂O₃ shell can act as an electrochemically active material to store and release lithium ions, whereas the highly conductive and inactive Fe core functions as nothing more than an efficient electrical conducting pathway and a remarkable buffer to tolerate volume changes of the electrode materials during the insertion and extraction of lithium ions. The core–shell Fe/Fe₂O₃ nanowire maintains an excellent reversible capacity of over 767 mA h g^?1 at 500 mA g^?1 after 200 cycles with a high average Coulombic efficiency of 98.6 %. Even at 2000 mA g^?1, a stable capacity as high as 538 mA h g^?1 could be obtained. The unique composition and nanostructure of this electrode material contribute to this enhanced electrochemical performance. Due to the ease of large‐scale fabrication and superior electrochemical performance, these hybrid nanowires are promising anode materials for the next generation of high‐performance LIBs.     

A Self‐Standing and Flexible Electrode of Yolk–Shell CoS2 Spheres Encapsulated with Nitrogen‐Doped Graphene for High‐Performance Lithium‐Ion Batteries

Flexible lithium‐ion batteries (LIBs) have recently attracted increasing attention with the fast development of bendable electronic systems. Herein, a facile and template‐free solvothermal method is presented for the fabrication of hybrid yolk–shell CoS₂ and nitrogen‐doped graphene (NG) sheets. The yolk–shell architecture of CoS₂ encapsulated with NG coating is designed for the dual protection of CoS₂ to address the structural and interfacial stability concerns facing the CoS₂ anode. The as‐prepared composite can be assembled into a film, which can be used as a binder‐free and flexible electrode for LIBs that does not require any carbon black conducting additives or current collectors. When evaluating lithium‐storage properties, such a flexible electrode exhibits a high specific capacity of 992 mAh g^?1 in the first reversible discharge capacity at a current rate of 100 mA g^?1 and high reversible capacity of 882 mAh g^?1 after 150 cycles with excellent capacity retention of 89.91 %. Furthermore, a reversible capacity as high as 655 mAh g^?1 is still achieved after 50 cycles even at a high rate of 5 C due to the yolk–shell structure and NG coating, which not only provide short Li‐ion and electron pathways, but also accommodate large volume variation.     

Sequential Chemistry Toward Core–Shell Structured Metal Sulfides as Stable and Highly Efficient Visible‐Light Photocatalysts

A universal sequential synthesis strategy in aqueous solution is presented for highly uniform core–shell structured photocatalysts, which consist of a metal sulfide light absorber core and a metal sulfide co‐catalyst shell. We show that the sequential chemistry can drive the formation of unique core–shell structures controlled by the constant of solubility product of metal sulfides. A variety of metal sulfide core–shell structures have been demonstrated, including CdS@CoS_x, CdS@MnS_x, CdS@NiS_x, CdS@ZnS_x, CuS@CdS, and more complexed CdS@ZnS_x@CoS_x. The obtained strawberry‐like CdS@CoS_x core–shell structures exhibit a high photocatalytic H₂ production activity of 3.92 mmol h^?1 and an impressive apparent quantum efficiency of 67.3 % at 420 nm, which is much better than that of pure CdS nanoballs (0.28 mmol h^?1), CdS/CoS_x composites (0.57 mmol h^?1), and 5 %wt Pt‐loaded CdS photocatalysts (1.84 mmol h^?1).     

Nitrogen‐Doped Mesoporous Carbon‐Encapsulated MoO2 Nanobelts as a High‐Capacity and Stable Host for Lithium‐Ion Storage

N‐doped mesoporous carbon‐capped MoO₂ nanobelts (designated as MoO₂@NC) were synthesized and applied to lithium‐ion storage. Owing to the stable core–shell structural framework and conductive mesoporous carbon matrix, the as‐prepared MoO₂@NC shows a high specific capacity of around 700 mA h g⁻¹ at a current of 0.5 A g⁻¹, excellent cycling stability up to 100 cycles, and superior rate performance. The N‐doped mesoporous carbon can greatly improve the conductivity and provide uninhibited conducting pathways for fast charge transfer and transport. Moreover, the core–shell structure improved the structural integrity, leading to a high stability during the cycling process. All of these merits make the MoO₂@NC to be a suitable and promising material for lithium ion battery.     

Core–Shell α‐Fe2O3@α‐MoO3 Nanorods as Lithium‐Ion Battery Anodes with Extremely High Capacity and Cyclability

α‐Fe₂O₃ nanoparticles are uniformly coated on the surface of α‐MoO₃ nanorods through a two‐step hydrothermal synthesis method. As the anode of a lithium‐ion battery, α‐Fe₂O₃@α‐MoO₃ core–shell nanorods exhibit extremely high lithium‐storage performance. At a rate of 0.1 C (10 h per half cycle), the reversible capacity of α‐Fe₂O₃@α‐MoO₃ core–shell nanorods is 1481 mA h g^?1 and a value of 1281 mA h g^?1 is retained after 50 cycles, which is much higher than that retained by bare α‐MoO₃ and α‐Fe₂O₃ and higher than traditional theoretical results. Such a good performance can be attributed to the synergistic effect between α‐Fe₂O₃ and α‐MoO₃, the small size effect, one‐dimensional nanostructures, short paths for lithium diffusion, and interface spaces. Our results reveal that core–shell nanocomposites have potential applications as high‐performance lithium‐ion batteries.     

Magnetically Recoverable Core–Shell Nanocomposites with Enhanced Photocatalytic Activity

Core–shell structured Fe₃O₄/SiO₂/TiO₂ nanocomposites with enhanced photocatalytic activity that are capable of fast magnetic separation have been successfully synthesized by combining two steps of a sol–gel process with calcination. The as‐obtained core–shell structure is composed of a central magnetite core with a strong response to external fields, an interlayer of SiO₂, and an outer layer of TiO₂ nanocrystals with a tunable average size. The convenient control over the size and crystallinity of the TiO₂ nanocatalysts makes it possible to achieve higher photocatalytic efficiency than that of commercial photocatalyst Degussa P25. The photocatalytic activity increases as the thickness of the TiO₂ nanocrystal shell decreases. The presence of SiO₂ interlayer helps to enhance the photocatalytic efficiency of the TiO₂ nanocrystal shell as well as the chemical and thermal stability of Fe₃O₄ core. In addition, the TiO₂ nanocrystals strongly adhere to the magnetic supports through covalent bonds. We demonstrate that this photocatalyst can be easily recycled by applying an external magnetic field while maintaining their photocatalytic activity during at least eighteen cycles of use.     

A Carbon‐Sulfur Hybrid with Pomegranate‐like Structure for Lithium‐Sulfur Batteries

A carbon‐sulfur hybrid with pomegranate‐like core–shell structure, which demonstrates a high rate performance and relatively high cyclic stability, is obtained through carbonization of a carbon precursor in the presence of a sulfur precursor (FeS₂) and a following oxidation of FeS₂ to sulfur by HNO₃. Such a structure effectively protects the sulfur and leaves enough buffer space after Fe³⁺ removal and, at the same time, has an interconnected conductive network. The capacity of the obtained hybrid is 450 mA h g^?1 under the current density of 5 C. This work provides a simple strategy to design and prepare various high‐performance carbon‐sulfur hybrids for lithium‐sulfur batteries.     

Dual‐Pore Mesoporous Carbon@Silica Composite Core–Shell Nanospheres for Multidrug Delivery

Monodispersed mesoporous phenolic polymer nanospheres with uniform diameters were prepared and used as the core for the further growth of core–shell mesoporous nanorattles. The hierarchical mesoporous nanospheres have a uniform diameter of 200 nm and dual‐ordered mesopores of 3.1 and 5.8 nm. The hierarchical mesostructure and amphiphilicity of the hydrophobic carbon cores and hydrophilic silica shells lead to distinct benefits in multidrug combination therapy with cisplatin and paclitaxel for the treatment of human ovarian cancer, even drug‐resistant strains.     

Atom‐Precise Polyoxometalate–Ag2S Core–Shell Nanoparticles

Atomically precise polyoxometalate–Ag₂S core–shell nanoparticles were generated in a top‐down approach under solvothermal conditions and structurally confirmed by X‐ray single‐crystal diffraction as an interesting core–shell structure comprising an in situ generated Mo₆O₂₂^8? polyoxometalate core and a mango‐like Ag₅₈S₃₈ shell. This result demonstrates the possibility to integrate polyoxometalate and Ag₂S nanoparticles into a core–shell heteronanostructure with precisely controlled atomical compositions of both core and shell.     

Selected‐Control Fabrication of Multifunctional Fluorescent–Magnetic Core–Shell and Yolk–Shell Hybrid Nanostructures

The selected‐control preparation of uniform core–shell and yolk–shell architectures, which combine the multiple functions of a superparamagnetic iron oxide (SPIO) core and europium‐doped yttrium oxide (Y₂O₃:Eu) shell in a single material with tunable fluorescence and magnetic properties, has been successfully achieved by controlling the heat‐treatment conditions. Furthermore, the shell thickness and interior cavity of SPIO@Y₂O₃:Eu core–shell and yolk–shell nanostructures can be precisely tuned. Importantly, as‐prepared SPIO@Y₂O₃:Eu yolk–shell nanocapsules (NCs) modified with amino groups as cancer‐cell fluorescence imaging agents are also demonstrated. To the best of our knowledge, this is the first report on the selected‐control fabrication of uniform SPIO@Y₂O₃:Eu core–shell nanoparticles and yolk–shell NCs. The combined magnetic manipulation and optical monitoring of magnetic–fluorescent SPIO@Y₂O₃:Eu yolk–shell NCs will open up many exciting opportunities in dual imaging for targeted delivery and thermal therapy.     

Sandwich‐like Catalyst–Carbon–Catalyst Trilayer Structure as a Compact 2D Host for Highly Stable Lithium–Sulfur Batteries

Herein, we propose the construction of a sandwich‐structured host filled with continuous 2D catalysis–conduction interfaces. This MoN‐C‐MoN trilayer architecture causes the strong conformal adsorption of S/Li₂S_x and its high‐efficiency conversion on the two‐sided nitride polar surfaces, which are supplied with high‐flux electron transfer from the buried carbon interlayer. The 3D self‐assembly of these 2D sandwich structures further reinforces the interconnection of conductive and catalytic networks. The maximized exposure of adsorptive/catalytic planes endows the MoN‐C@S electrode with excellent cycling stability and high rate performance even under high S loading and low host surface area. The high conductivity of this trilayer texture does not compromise the capacity retention after the S content is increased. Such a job‐synergistic mode between catalytic and conductive functions guarantees the homogeneous deposition of S/Li₂S_x, and avoids thick and devitalized accumulation (electrode passivation) even after high‐rate and long‐term cycling.     

Core–Shell‐Structured CNT@RuO2 Composite as a High‐Performance Cathode Catalyst for Rechargeable Li–O2 Batteries

A RuO₂ shell was uniformly coated on the surface of core CNTs by a simple sol–gel method, and the resulting composite was used as a catalyst in a rechargeable Li–O₂ battery. This core–shell structure can effectively prevent direct contact between the CNT and the discharge product Li₂O₂, thus avoiding or reducing the formation of Li₂CO₃, which can induce large polarization and lead to charge failure. The battery showed a high round‐trip efficiency (ca. 79 %), with discharge and charge overpotentials of 0.21 and 0.51 V, respectively, at a current of 100 mA g_total^?1. The battery also exhibited excellent rate and cycling performance.