3,4,9,10‐Perylenetetracarboxylic Acid/Hemin Nanocomposites Act as Redox Probes and Electrocatalysts for Constructing a Pseudobienzyme‐Channeling Amplified Electrochemical Aptasensor

A simple wet‐chemical strategy for the synthesis of 3,4,9,10‐perylenetetracarboxylic acid (PTCA)/hemin nanocomposites through π–π interactions is demonstrated. Significantly, the hemin successfully conciliates PTCA redox activity with a pair of well‐defined redox peaks and intrinsic peroxidase‐like activity, which provides potential application of the PTCA self‐derived redox activity as redox probes. Additionally, PTCA/hemin nanocomposites exhibit a good membrane‐forming property, which not only avoids the conventional fussy process for redox probe immobilization, but also reduces the participation of the membrane materials that act as a barrier of electron transfer. On the basis of these unique properties, a pseudobienzyme‐channeling amplified electrochemical aptasensor is developed that is coupled with glucose oxidase (GOx) for thrombin detection by using PTCA/hemin nanocomposites as redox probes and electrocatalysts. With the addition of glucose to the electrolytic cell, the GOx on the aptasensor surface bioelectrocatalyzed the reduction of glucose to produce H₂O₂, which in turn was electrocatalyzed by the PTCA/hemin nanocomposites. Cascade schemes, in which an enzyme is catalytically linked to another enzyme, can produce signal amplification and therefore increase the biosensor sensitivity. As a result, a linear relationship for thrombin from 0.005 to 20 nM and a detection limit of 0.001 nM were obtained.     

Hollow Ag/MnO2 Nanostructures with Controllable Shells: Synthesis and Oxygen Reduction Reaction Catalytic Performance

Novel hollow Ag/MnO₂ nanostructures with controlled shell composition and structure were designed and synthesized. In the present synthetic procedure, silver nanocrystals were oxidized by KMnO₄, and MnO₂ was heterogeneously formed on the surface of silver nanocrystals, then released Ag⁺ was photoreduced to silver adjacent to MnO₂. By simply changing the photoreduction moment, simultaneously with or after the addition of KMnO₄, hollow Ag/MnO₂ structures with different shell architectures—a monolayered shell composed of evenly mixed silver and MnO₂ and a double‐layered shell composed of an inner MnO₂ layer and an outer silver layer—can be obtained. Furthermore, the morphology of the hollow structure can be tuned by selecting different silver precursors, and the ratio of silver to MnO₂ in the shell can also be controlled by adjusting the ratio in the original reaction mixture. Electrochemical measurements revealed significantly enhanced catalytic performance in the oxygen reduction reaction for the prepared hollow structures. Compared with the Ag/MnO₂ composite, the onset potentials positively shift by about 50.0 mV and limiting current densities are nearly 2.0 times higher.     

Microwave‐Assisted Synthesis of a Superparamagnetic Surface‐Functionalized Porous Fe3O4/C Nanocomposite

An Fe₃O₄/C nanocomposite was synthesized in a microwave‐assisted hydrothermal reaction. This green wet‐chemical approach is simple, low‐cost, and ideal for large‐scale production. The resulting composite material was characterized by transmission electron microscopy, powder X‐ray diffraction, energy‐dispersive X‐ray spectroscopy, Brunauer–Emmett–Teller analysis, X‐ray photoelectron spectroscopy, vibrating sample magnetometry, and UV/Vis spectroscopy. The product possesses porous structures and exhibits superparamagnetic behavior. Interestingly, its functional groups were inherited from the starting materials. This hydrophilic and biocompatible nanocomposite may find applications in catalysis, separation, adsorption, and bionanotechnology.     

A Core–Shell Fe/Fe2O3 Nanowire as a High‐Performance Anode Material for Lithium‐Ion Batteries

The preparation of novel one‐dimensional core–shell Fe/Fe₂O₃ nanowires as anodes for high‐performance lithium‐ion batteries (LIBs) is reported. The nanowires are prepared in a facile synthetic process in aqueous solution under ambient conditions with subsequent annealing treatment that could tune the capacity for lithium storage. When this hybrid is used as an anode material for LIBs, the outer Fe₂O₃ shell can act as an electrochemically active material to store and release lithium ions, whereas the highly conductive and inactive Fe core functions as nothing more than an efficient electrical conducting pathway and a remarkable buffer to tolerate volume changes of the electrode materials during the insertion and extraction of lithium ions. The core–shell Fe/Fe₂O₃ nanowire maintains an excellent reversible capacity of over 767 mA h g^?1 at 500 mA g^?1 after 200 cycles with a high average Coulombic efficiency of 98.6 %. Even at 2000 mA g^?1, a stable capacity as high as 538 mA h g^?1 could be obtained. The unique composition and nanostructure of this electrode material contribute to this enhanced electrochemical performance. Due to the ease of large‐scale fabrication and superior electrochemical performance, these hybrid nanowires are promising anode materials for the next generation of high‐performance LIBs.     

Synthesis of 1,3‐Bis(tetracyano‐2‐azulenyl‐3‐butadienyl)azulenes by the [2+2] Cycloaddition–Retroelectrocyclization of 1,3‐Bis(azulenylethynyl)azulenes with Tetracyanoethylene

1,3‐Bis(azulenylethynyl)azulene derivatives 9–14 have been prepared by palladium‐catalyzed alkynylation of 1‐ethynylazulene 8 with 1,3‐diiodoazulene 1 or 1,3‐diethynylazulene 2 with the corresponding haloazulenes 3–7 under Sonogashira–Hagihara conditions. Bis(alkynes) 9–14 reacted with tetracyanoethylene (TCNE) in a formal [2+2] cycloaddition–retroelectrocyclization reaction to afford the corresponding new bis(tetracyanobutadiene)s (bis(TCBDs)) 15–20 in excellent yields. The redox behavior of bis(TCBD)s 15–20 was examined by using CV and differential pulse voltammetry (DPV), which revealed their reversible multistage reduction properties under the electrochemical conditions. Moreover, a significant color change of alkynes 9–14 and TCBDs 15–20 was observed by visible spectroscopy under the electrochemical reduction conditions.     

Fe3O4@(SDS-HTlc)纳米复合物的制备及对甲基橙的吸附

采用离子交换法制备了具有核-壳结构的磁性十二烷基硫酸钠改性类水滑石Fe_3O_4@(SDSHTlc)纳米复合物,并利用透射电镜、粉末X-射线衍射、红外光谱、电感耦合等离子体发射光谱、元素分析等对其进行了表征。研究了Fe_3O_4@(SDS-HTlc)对甲基橙的吸附动力学和热力学。结果表明,Fe_3O_4@(SDSHTlc)对甲基橙有较好吸附效果,吸附动力学曲线符合准二级动力学方程;吸附等温线符合线性方程,吸附量随体系p H的增大和温度的升高均降低。在外部磁场下,30s内可从水溶液中分离出Fe_3O_4@(SDS-HTlc),这为去除水中疏水染料提供了简单的一步吸附处理方法。     

Photo‐ and Redox‐Active Dendritic Molecules with Soft,Layered Nanostructures

Molecules with one photoactive group (porphyrin) and multiple redox‐active groups (ferrocenes) are described. The molecules are based on dendritic frameworks, with the ferrocenyl groups attached at the “internal” positions and the porphyrin attached at the focal point, leading to a characteristic layer architecture. Molecules of up to the third generation were synthesized and examined. The results of ¹H NMR spectroscopy and fluorescence quenching indicated that the ferrocenyl groups at the second layer approach the core porphyrin most closely, which is consistent with the results of molecular‐dynamics simulations. The electrochemistry of the molecules was also examined in detail, and a new formula is proposed for the analysis of multiple‐electron transfer in these “redox‐pool” molecules.     

Reduced Graphene‐Wrapped MnO2 Nanowires Self‐Inserted with Co3O4 Nanocages: Remarkable Enhanced Performances for Lithium‐Ion Anode Applications

A simple synthetic approach for graphene‐templated nanostructured MnO₂ nanowires self‐inserted with Co₃O₄ nanocages is proposed in this work. The Co₃O₄ nanocages were penetrated in situ by MnO₂ nanowires. As an anode, the as‐obtained MnO₂–Co₃O₄–RGO composite exhibits remarkable enhanced performance compared with the MnO₂–RGO and Co₃O₄–RGO samples. The MnO₂–Co₃O₄–RGO electrode delivers a reversible capacity of up to 577.4 mA h g^?1 after 400 cycles at 500 mA g^?1 and the Coulombic efficiency of MnO₂–Co₃O₄–RGO is about 96 %.     

Redox‐Responsive Hydrogel System Using the Molecular Recognition of β‐Cyclodextrin

Summary: We have successfully constructed a redox‐responsible hydrogel system by combination of β‐cyclodextrin (β‐CD), dodecyl‐modified poly(acrylic acid) [p(AA/C₁₂)], and a redox‐responsive guest, ferrocenecarboxylic acid (FCA). In the reduced state of FCA, the ternary mixture exhibited a gel‐like behavior, whereas, in its oxidized state, the mixture exhibited a sol behavior.

Conceptual illustration for the redox‐responsive hydrogel system.     

Exchange‐Coupled fct‐FePd/α‐Fe Nanocomposite Magnets Converted from Pd/Fe3O4 Core/Shell Nanoparticles

We report the controlled synthesis of exchange‐coupled face‐centered tetragonal (fct) FePd/α‐Fe nanocomposite magnets with variable Fe concentration. The composite was converted from Pd/Fe₃O₄ core/shell nanoparticles through a high‐temperature annealing process in a reducing atmosphere. The shell thickness of core/shell Pd/Fe₃O₄ nanoparticles could be readily tuned, and subsequently the concentration of Fe in nanocomposite magnets was controlled. Upon annealing reduction, the hard magnetic fct‐FePd phase was formed by the interdiffusion between reduced α‐Fe and face‐centered cubic (fcc) Pd, whereas the excessive α‐Fe remained around the fct‐FePd grains, realizing exchange coupling between the soft magnetic α‐Fe and hard magnetic fct‐FePd phases. Magnetic measurements showed variation in the magnetic properties of the nanocomposite magnets with different compositions, indicating distinct exchange coupling at the interfaces. The coercivity of the exchange‐coupled nanocomposites could be tuned from 0.7 to 2.8 kOe and the saturation magnetization could be controlled from 93 to 160 emu g^?1. This work provides a bottom‐up approach using exchange‐coupled nanocomposites for engineering advanced permanent magnets with controllable magnetic properties.     

Redox‐Active Nickel in Carbon Nanotubes and Its Direct Determination

The presence of residual metal‐catalyst impurities in carbon nanotubes is responsible for their toxicity. It is important to differentiate between the total amount of impurities and the redox‐active (bioavailable) amount of such impurities because only the bioavailable impurities exhibit toxic effects. Herein, we report a simple and specific method for quantifying the amount of redox‐active Ni present in various commercial samples of CNTs. It is based on the electrochemical oxidation of Ni(OH)₂ that is formed in alkaline solutions when Ni impurities are opened to the surrounding environment. Metallic Ni impurities play an extremely active role in toxicological assays as well as in undesired catalytic processes, and thus a method to rapidly quantify the amount of redox‐active Ni is of great importance.     

Tuneable Transient Thermogels Mediated by a pH‐ and Redox‐Regulated Supramolecular Polymerization

A multistimuli‐responsive transient supramolecular polymerization of β‐sheet‐encoded dendritic peptide monomers in water is presented. The amphiphiles, which contain glutamic acid and methionine, undergo a glucose oxidase catalyzed, glucose‐fueled transient hydrogelation in response to an interplay of pH and oxidation stimuli, promoted by the production of reactive oxygen species (ROS). Adjusting the enzyme and glucose concentration allows tuning of the assembly and the disassembly rates of the supramolecular polymers, which dictate the stiffness and transient stability of the hydrogels. The incorporation of triethylene glycol chains introduces thermoresponsive properties to the materials. We further show that repair enzymes are able to reverse the oxidative damage in the methionine‐based thioether side chains. Since ROS play an important role in signal transduction cascades, our strategy offers great potential for applications of these dynamic biomaterials in redox microenvironments.     

K2Mn4O8/Reduced Graphene Oxide Nanocomposites for Excellent Lithium Storage and Adsorption of Lead Ions

Ion diffusion efficiency at the solid–liquid interface is an important factor for energy storage and adsorption from aqueous solution. Although K₂Mn₄O₈ (KMO) exhibits efficient ion diffusion and ion‐exchange capacities, due to its high interlayer space of 0.70 nm, how to enhance its mass transfer performance is still an issue. Herein, novel layered KMO/reduced graphene oxide (RGO) nanocomposites are fabricated through the anchoring of KMO nanoplates on RGO with a mild solution process. The face‐to‐face structure facilitates fast transfer of lithium and lead ions; thus leading to excellent lithium storage and lead ion adsorption. The anchoring of KMO on RGO not only increases electrical conductivity of the layered nanocomposites, but also effectively prevents aggregation of KMO nanoplates. The KMO/RGO nanocomposite with an optimal RGO content exhibits a first cycle charge capacity of 739 mA h g^?1, which is much higher than that of KMO (326 mA h g^?1). After 100 charge–discharge cycles, it still retains a charge capacity of 664 mA h g^?1. For the adsorption of lead ions, the KMO/RGO nanocomposite exhibits a capacity of 341 mg g^?1, which is higher than those of KMO (305 mg g^?1) and RGO (63 mg g^?1) alone.     

Hierarchical ZnCo2O4@NiCo2O4 Core–Sheath Nanowires: Bifunctionality towards High‐Performance Supercapacitors and the Oxygen‐Reduction Reaction

Increasing energy demands and worsening environmental issues have stimulated intense research on alternative energy storage and conversion systems including supercapacitors and fuel cells. Here, a rationally designed hierarchical structure of ZnCo₂O₄@NiCo₂O₄ core–sheath nanowires synthesized through facile electrospinning combined with a simple co‐precipitation method is proposed. The obtained core–sheath nanostructures consisting of mesoporous ZnCo₂O₄ nanowires as the core and uniformly distributed ultrathin NiCo₂O₄ nanosheets as the sheath, exhibit excellent electrochemical activity as bifunctional materials for supercapacitor electrodes and oxygen reduction reaction (ORR) catalysts. Compared with the single component of either ZnCo₂O₄ nanowires or NiCo₂O₄ nanosheets, the hierarchical ZnCo₂O₄@NiCo₂O₄ core–sheath nanowires demonstrate higher specific capacitance of 1476 F g^?1 (1 A g^?1) and better rate capability of 942 F g^?1 (20 A g^?1), while maintaining 98.9 % capacity after 2000 cycles at 10 A g^?1. Meanwhile, the ZnCo₂O₄@NiCo₂O₄ core–sheath nanowires reveal comparable catalytic activity but superior stability and methanol tolerance over Pt/C as ORR catalyst. The impressive performance may originate from the unique hierarchical core–sheath structures that greatly facilitate enhanced reactivity, and faster ion and electron transfer.     

Efficient Noble‐Metal‐Free γ‐Fe2O3@NiO Core–Shell Nanostructured Photocatalysts for Water Oxidation

Flowerlike noble‐metal‐free γ‐Fe₂O₃@NiO core–shell hierarchical nanostructures have been fabricated and examined as a catalyst in the photocatalytic oxidation of water with [Ru(bpy)₃](ClO₄)₂ as a photosensitizer and Na₂S₂O₈ as a sacrificial electron acceptor. An apparent TOF of 0.29 μmols^?1 m^?2 and oxygen yield of 51 % were obtained with γ‐Fe₂O₃@NiO. The γ‐Fe₂O₃@NiO core–shell hierarchical nanostructures could be easily separated from the reaction solution whilst maintaining excellent water‐oxidation activity in the fourth and fifth runs. The surface conditions of γ‐Fe₂O₃@NiO also remained unchanged after the photocatalytic reaction, as confirmed by X‐ray photoelectron spectroscopy (XPS).     

Transition‐Metal‐Catalyzed Redox‐Neutral and Redox‐Green C–H Bond Functionalization

Transition‐metal‐catalyzed C–H bond functionalization has become one of the most promising strategies to prepare complex molecules from simple precursors. However, the utilization of environmentally unfriendly oxidants in the oxidative C–H bond functionalization reactions reduces their potential applications in organic synthesis. This account describes our recent efforts in the development of a redox‐neutral C–H bond functionalization strategy for direct addition of inert C–H bonds to unsaturated double bonds and a redox‐green C–H bond functionalization strategy for realization of oxidative C–H functionalization with O₂ as the sole oxidant, aiming to circumvent the problems posed by utilizing environmentally unfriendly oxidants. In principle, these redox‐neutral and redox‐green strategies pave the way for establishing new environmentally benign transition‐metal‐catalyzed C–H bond functionalization strategies.     

Rational Synthesis of Antiaromatic 5,15‐Dioxaporphyrin and Oxidation into β,β‐Linked Dimers

5,15‐Dioxaporphyrin was synthesized for the first time by a nucleophilic aromatic substitution reaction of a nickel bis(α,α′‐dibromodipyrrin) complex with benzaldoxime, followed by an intramolecular annulation of the α‐hydroxy‐substituted intermediate. This unprecedented molecule is a 20π‐electron antiaromatic system, in terms of Hückel's rule of aromaticity, because lone pair electrons of oxygen atoms are incorporated into the 18π‐electron conjugated system of the porphyrin. A theoretical analysis based on the gauge‐including magnetically induced current method confirmed its antiaromaticity and a dominant inner ring pathway for the ring current. The unique reactivity of 5,15‐dioxaporphyrin forming a β,β‐linked dimer upon oxidation was also revealed.     

Hydrothermal Synthesis and Properties of Controlled α‐Fe2O3 Nanostructures in HEPES Solution

A facile, template‐free, and environmentally friendly hydrothermal strategy was explored for the controllable synthesis of α‐Fe₂O₃ nanostructures in HEPES solution (HEPES=2‐[4‐(2‐hydroxyethyl)‐1‐piperazinyl]ethanesulfonic acid). The effects of experimental parameters including HEPES/FeCl₃ molar ratio, pH value, reaction temperature, and reaction time on the formation of α‐Fe₂O₃ nanostructures have been investigated systematically. Based on the observations of the products, the function of HEPES in the reaction is discussed. The different α‐Fe₂O₃ nanostructures possess different optical, magnetic properties, and photocatalytic activities, depending on the shape and size of the sample. In addition, a novel and facile approach was developed for the synthesis of Au/α‐Fe₂O₃ and Ag/α‐Fe₂O₃ nanocomposites in HEPES buffer solution; this verified the dual function of HEPES both as reductant and stabilizer. This work provides a new strategy for the controllable synthesis of transition metal oxide nanostructures and metal‐supported nanocomposites, and gives a strong evidence of the relationship between the property and morphology/size of nanomaterials.     

Redox‐Switchable 20π‐, 19π‐, and 18π‐Electron 5,10,15,20‐Tetraaryl‐5,15‐diazaporphyrinoid Nickel(II) Complexes

The first examples of air‐stable 20π‐electron 5,10,15,20‐tetraaryl‐5,15‐diaza‐5,15‐dihydroporphyrins, their 18π‐electron dications, and the 19π‐electron radical cation were prepared through metal‐templated annulation of nickel(II) bis(5‐arylamino‐3‐chloro‐8‐mesityldipyrrin) complexes followed by oxidation. The neutral 20π‐electron derivatives are antiaromatic and the cationic 18π‐electron derivatives are aromatic in terms of the magnetic criterion of aromaticity. The meso N atoms in these diazaporphyrinoids give rise to characteristic redox and optical properties for the compounds that are not typical of isoelectronic 5,10,15,20‐tetraarylporphyrins.