Photocatalytic properties of mesoporous TiO<Subscript>2</Subscript>/ZrO<Subscript>2</Subscript> films in gas-phase oxidation of alcohols

We have used the sol-gel template synthesis method to obtain mesoporous zirconium-containing titanium dioxide films and have studied their structural and sorption characteristics, surface acid function, and photocatalytic activity during gas-phase oxidation of aliphatic alcohols. We have shown that the zirconium content changes the acidity and specific surface area of the films, determining the rate at which the studied processes occur and the relative yield of reaction products. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 41, No. 6, pp. 354–359, November–December, 2005.     

Fabrication and characterization of TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript> composite nanoparticles and polyurethane/(TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript>) nanocomposite films

TiO₂–SiO₂ composite nanoparticles were prepared by a sol–gel process. To obtain the assembly of TiO₂–SiO₂ composite nanoparticles, different molar ratios of Ti/Si were investigated. Polyurethane (PU)/(TiO₂–SiO₂) hybrid films were synthesized using the “grafting from” technique by incorporation of modified TiO₂–SiO₂ composite nanoparticles building blocks into PU matrix. Firstly, 3-aminopropyltriethysilane was employed to encapsulate TiO₂–SiO₂ composite nanoparticles’ surface. Secondly, the PU shell was tethered to the TiO₂–SiO₂ core surface via surface functionalized reaction. The particle size of TiO₂–SiO₂ composite sol was performed on dynamic light scattering, and the microstructure was characterized by X-ray diffraction and Fourier transform infrared. Thermogravimetric analysis and transmission electron microscopy (TEM) employed to study the hybrid films. The average particle size of the TiO₂–SiO₂ composite particles is about 38 nm when the molar ratio of Ti/Si reaches to1:1. The TEM image indicates that TiO₂–SiO₂ composite nanoparticles are well dispersed in the PU matrix.     

Preparation and photocatalytic activity of TiO<Subscript>2</Subscript> films with Ni nanoparticles

Titania thin films were synthesized by sol–gel dip-coating method with metallic Ni nanoparticles synthesized separately from an organometallic precursor Ni(COD)₂ (COD = cycloocta-1,5-diene) in presence of 1,3-diaminopropane as a stabilizer. Titania was obtained from a titanium isopropoxide precursor solution in presence of acetic acid. A Ni/TiO₂ sol system was used to coat glass substrate spheres (6, 4 and 3 mm diameter sizes), and further heat treatment at 400 °C was carried out to promote the crystallization of titania. XRD analysis of the TiO₂ films revealed the crystallization of the anatase phase. Transmission Electron Microscopy (TEM) and High Resolution TEM studies of Ni nanoparticles before mixing with the TiO₂ solution revealed the formation of Ni nanostructures with an average size of 5–10 nm. High-angle annular dark-field images of the Ni/TiO₂ system revealed well-dispersed Ni nanoparticles supported on TiO₂ and confirmed by AFM analysis. The photocatalytic activity of the Ni/TiO₂ films was evaluated in hydrogen evolution from the decomposition of ethanol using a mercury lamp for UV light irradiation. Titania films in presence of Ni nanoparticles show higher efficiency in their photocatalytic properties in comparison with TiO₂.     

Thermal behavior of Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>/TiO<Subscript>2</Subscript> mesoporous gels

Summary Titania-based photocatalytic materials were prepared by sol-gel method using Fe³⁺ and polyethyleneglycol (PEG₆₀₀) as additives. Thermogravimetry (TG), differential thermal analysis (DTA) and evolved gas analysis (EGA) with MS detection were used to elucidate processes that take place during heating of Fe³⁺ containing titania gels. The microstructure development of the Fe₂O₃/TiO₂ gel samples with and without PEG₆₀₀ admixtures was characterized by emanation thermal analysis (ETA) under in situ heating in air. A mathematical model was used for the evaluation of ETA results. Surface area and porosity measurements of the samples dried at 120&deg;C and the samples preheated for 1 h to 300 and 500&deg;C were compared. From the XRD measurements it was confirmed that the crystallization of anatase took place after thermal heating up to 600&deg;C.     

Enhancement of photocatalytic H<Subscript>2</Subscript> evolution over TiO<Subscript>2</Subscript> nano-sheet films by surface loading NiS nanoparticles

NiS/TiO₂ nano-sheet films (NiS/TiO₂ NSFs) photocatalysts were prepared by loading NiS nanoparticles as noble metal-free cocatalysts on the surface of TiO₂ films through a solvothermal method. The prepared samples were characterized by XRD, SEM, EDS, UV–Vis absorption spectra and XPS analysis. The photocatalytic H₂ evolution and photoluminescence spectroscopy (PL) experiments indicated that the NiS cocatalysts could efficiently promote the separation of photogenerated charge carriers in TiO₂ and consequently enhance the H₂ evolution activity. The hydrogen yield obtained from the optimal sample reached 4.31 μmol cm^–2 at 3.0 h and the corresponding energy efficiency was about 0.26%, which was 21 times higher than that of pure TiO₂ NSF. A possible photocatalytic mechanism of NiS cocatalyst on the improvement of the photocatalytic performance of TiO₂ NSF was also proposed.     

Preparation and photoelectrochemical performance of TiO<Subscript>2</Subscript>/Ag<Subscript>2</Subscript>Se interface composite film

Coupling TiO₂ with a narrow band gap semiconductor acting as the photosensitizer has attracted much attention in solar energy exploitation. In this work, the porous TiO₂ film was first formed on the conducting glass plate (CGP) substrate by the decomposition of polyethylene glycol (PEG) mixing in titanium hydroxide sol at 450°C. Then, the TiO₂/Ag²Se interface composite film was fabricated by interface reaction of AgNO₃ with NaSeSO₃ on the activated surface of porous TiO₂ film. The results of SEM and XRD analyses indicated that the porous TiO₂ layer was made up of the anatase crystal, and the Ag₂Se layer was made up of congregative small particles that have low-temperature α-phase structure. Due to its efficient charge separation for the photo-induced electron-hole pairs, the TiO₂/Ag₂Se interface composite film as-prepared has good photovoltaic property and high photocurrent response for visible light, which have been confirmed by the photoelectrochemical measurements.     

Photocatalytic activity of (sulfur,nitrogen)-codoped mesoporous TiO<Subscript>2</Subscript> thin films

Nitrogen and sulfur co-doped mesoporous TiO₂ thin films were fabricated using thiourea as a doping resource by the combination of the sol–gel and evaporation-induced self-assembly (EISA) processes. Scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), N₂ adsorption–desorption, and UV–vis spectra were performed to characterize the as-synthesized mesoporous TiO₂ materials. The XPS result shows that O–Ti–N and O–Ti–S bonds in the (S, N)-codoped mesoporous TiO₂ were formed. The resultant mesoporous (S, N)-codoped TiO₂ exhibited anatase framework with a high porosity and a narrow pore distribution. After being illuminated for 3 h, methyl orange (MO) could be degraded completely by the co-doped sample under the ultraviolet irradiation, whereas mesoporous TiO₂ film without doping could only degrade 60% MO. After being illuminated by visible light, the water contact angles of the mesoporous co-doped TiO₂ samples decreased slightly, but the pure TiO₂ mesoporous film exhibited no change in the hydrophilicity.     

Properties of the electronic density of states in TiO<Subscript>2</Subscript> nanoparticles surrounded with aqueous electrolyte

Results on the density of sates of nanostructured TiO₂ as a function of particle size and temperature are reported. In TiO₂ nanoparticles with a mean diameter 10 nm, the density of states (DOS) is strongly temperature-dependent, indicating a rearrangement of the bandgap states in which the exponential energy parameter (width of the distribution) increases from 0.080 to 50 °C. For nanoparticles with mean diameters of 20 and 30 nm the DOS is much closer to an exponential distribution, and is much less sensitive to temperature variations. It is suggested that nanometer confinement has a significant influence on the density of electronic states for 10-nm particles, while band tailing is similar to that occurring in bulk semiconductors for the larger particles.

---

SiO<Subscript>2</Subscript> and TiO<Subscript>2</Subscript> nanoparticles in Aerosol OT reverse microemulsions: Synthesis and characterization

Stable SiO₂ and TiO₂ organosols were prepared by hydrolyzing tetraethyl orthosilicate (TEOS) in the presence of 6–12 M NH₃ and titanium(IV) isopropylate (TTIP) in reverse microemulsions of 0.12–0.25 M bis(2-ethylhexyl) sulfosuccinate (Aerosol OT, AOT) in n-decane with the aqueous pseudophase content of 2–3 vol %, 0.018–0.090 M TEOS, and 0.15–0.55 vol %, 0.003–0.025 M TTIP. The degree of hydrolysis was monitored by IR spectroscopy (for TEOS) and spectrophotometry (for TTIP). Oxide nanoparticles were characterized by photon-correlation spectroscopy (PCS) (D _h = 8–100 nm) and laser electrophoresis (ζ-potential = 7.4–11.6 mV). The occurrence of surface potential made it possible to separate the oxides from the excess of surfactant by nonaqueous electrophoresis and to determine particle sizes (7–40 nm) by means of transmission electron microscopy (TEM).     

Electrorheological property and microstructure of acetamide-modified TiO<Subscript>2</Subscript> nanoparticles

A sol–gel method has been proposed to prepare uniform TiO₂ nanoparticles whose average size is about 30 nm. The prepared nanometer TiO₂ particles are modified by acetamide via different self-assembled processes. X-ray diffraction analyses, scanning electron microscopy, and Fourier transform infrared spectrometry are used to determine the structure of the nanoparticles. The results indicate that the different synthesis processes do not change the morphology of the TiO₂/acetamide nanoparticles; nevertheless, they affect the interaction between amide and acetamide. The electrorheological (ER) activity is studied by shear stress under DC electric field. The acetamide-modified TiO₂ ER fluid shows notable ER activity with shear stress about 45 kPa (at 5 kV/mm), which outclasses the shear stress (2 kPa) of unmodified TiO₂ ER fluid. It is also found that the ER effect is very sensitive to the interaction of molecules on TiO₂ particles. The chemical bond between core and shell can enhance the ER activity of the sample.     

TiO<Subscript>2</Subscript> nanofibers embedding single crystalline TiO<Subscript>2</Subscript> nanowires

Epitaxially grown titanium dioxide (TiO₂) nanofibers embedding single crystalline TiO₂ nanowires (NWs) were successfully fabricated by electropinning poly(vinyl pyrrolidone)/ethanol solutions mixed with hydrothermally synthesized TiO₂ NWs and titanium isopropoxide precursors and subsequently calcinating the electrospun nanofibers. Utilizing scanning electron microscopy (SEM) and transmission electron microscopy (TEM), the morphologies of TiO₂ NWs and nanofibers were investigated. High resolution TEM (HR-TEM) and selected area electron diffraction (SAED) allowed us to indentify the fact that, during the calcination process under the optimized condition, titanium isopropoxide precursors were epitaxially crystallized on the surface of single crystalline TiO₂ NWs. Based on the X-ray diffraction (XRD) experiments, it was also realized that the crystalline structure of hydrothermally synthesized TiO₂ NWs and epitaxially crystallized TiO₂ nanofibers is anatase and that TiO₂ composite nanofibers embedding TiO₂ NWs exhibited a higher crystallinity than the pristine TiO₂ nanofibers. Additionally, ultraviolet visible (UV–Vis) spectra of nanofibers indicated that optical properties of TiO₂ nanofibers can be tuned by introducing the single crystalline TiO₂ NWs.     

Influence of ThO<Subscript>2</Subscript> on the photocatalytic activity of TiO<Subscript>2</Subscript>

Microcomposites consisting of TiO₂ (or Ce-doped TiO₂) and ThO₂ (0.5–2% of the TiO₂ mass) are produced by sol-gel synthesis of TiO₂ in presence of ThO₂. X-ray diffraction study reveals the effects of ThO₂ (compared to the ThO₂-free TiO₂, obtained by the same method) on the anatase interplanar distances, crystallites size and phase composition. The photocatalytic tests in presence of the composites under UV irradiation reveal an increase of the Malachite Green degradation rate constant. The effect depends on the Th relative content, temperature of annealing of the catalyst and addition of other doping agent. The highest photocatalytic activity is observed for TiO₂ obtained at 550°C and containing 1% ThO₂. The composite exhibits activity in dark, also. The presence of Ce⁴⁺ ions is not an obligatory requirement for the realization of the ThO₂ effect. The reported results suggest that the radioactivity of the Th and/or its decay products is one of the main factors responsible for the increased photocatalytic activity of TiO₂.      

Characterization of nanocrystalline anatase TiO<Subscript>2</Subscript> thin films

Nanoporous thin films were deposited onto glass substrates by painting with a solution of nanocrystalline anatase TiO(2) particles (with a size of either 6 nm or 16 nm) suspended in an organic solvent. Upon drying in air for about 1 day, the films were tempered at 450 degrees C in air for 1 h. This procedure results in stoichiometric TiO(2) films with a thickness of several micro m and a milky whitish appearance. Scanning force microscopy of the surface revealed that the nanoparticles of the films agglomerated into structures with lateral dimensions of some 100 nm. Transmission electron microscopy was utilized to investigate the structural arrangement of the crystallites in the films. High-resolution electron diffraction and X-ray diffraction analyses demonstrated, furthermore, that the material consists exclusively of a single TiO(2) phase, namely anatase, and that the films do not exhibit any preferential texture. The elemental stoichiometry and the possible presence of impurities were monitored throughout the films by means of secondary-ion mass spectrometry depth profiling. Electrical measurements have been carried out as a function of both the sample temperature T and the ambient oxygen partial pressure p(O(2)). From these data the electrical conductivity sigma of the porous films was determined in dependence of those parameters.     

Photoelectrochemical study of electrodeposited TiO<Subscript>2</Subscript> thin films onto F:SnO<Subscript>2</Subscript> substrates

TiO₂ thin films have been effectively fused onto F:SnO₂ (FTO) substrates via the electrodeposition method. The influence of deposition temperature on the synthesis of F:SnO₂ substrates and relative information of as-deposited and annealed TiO₂ thin films have been studied. Novel TiO₂ microspheres are detected on F:SnO₂ substrates at an optimized electrodeposition potential. Raman bands approve the creation of single-anatase-phase TiO₂. The optimized deposition surroundings show a decrease in the band gap of F:SnO₂ substrates and TiO₂ thin films. The determined photoelectrochemical properties of annealed TiO₂ thin films indicate a fill factor of 51% and power conversion efficiency of 0.15% for application in solar cells.     

Nanosized TiO<Subscript>2</Subscript> particles decorated on SiO<Subscript>2</Subscript> spheres (TiO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript>): synthesis and photocatalytic activities

Nanosized TiO₂ and nano-anatase TiO₂ decorated on SiO₂ spherical core shells were synthesized by using a sol–gel method. The synthesized pure TiO₂ nano particle and TiO₂ grafted on SiO₂ sphere with various ratios have been characterized for their structure and morphologies by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectrophotometry (FTIR) and transmission electron microscopy (TEM). Their surface areas were measured using the BET method. The photocatalytic activity of all nanocomposites was investigated using methylene blue as a model pollutant. The synthesized TiO₂/SiO₂ particles appeared to be more efficient in the degradation of methylene blue pollutant, as compared to pure TiO₂ particles.     

Synthesis and photocatalytic activity of TiO<Subscript>2</Subscript> nanoparticles fluorine-modified with TiF<Subscript>4</Subscript>

Fluorine-modified TiO₂ nan oparticles were synthesized by introducing TiF₄ as a fluorine source either before or after the sufficient hydrolysis and condensation of Ti(OEt)₄. The photocatalytic activity of the fluorine-modified catalysts was found to be greatly affected by the fluorine position in TiO₂ nanoparticles. When TiF₄ and Ti(OEt)₄ hydrolyzed with synchronization, the fluorine tended to be doped in the lattice. The formation of Ti³⁺ defects could result in charge recombination in bulk and bring down the photocatalytic activity. In contrast, if TiF₄ was introduced after the sufficient hydrolysis and condensation of Ti(OEt)₄. Ti−F bonds could exist mainly on the TiO₂ particles surface, which not only prevented the growth of anatase crystals but also facilitated the transfer of organic compounds from solution to catalyst surface by reducing the hydrophilic properties.     

Electrolyte-induced destabilization of hydrosols containing uniform TiO<Subscript>2</Subscript> nanoparticles

The electrolyte-induced destabilization of TiO₂ hydrosols consisting of anatase nanocrystals with a narrow particle size distribution is studied. It is established that, on the addition of HCl and KCl, the sols can undergo both fast and slow structural changes. It is shown that the thresholds of fast coagulation increase considerably as the nanoparticle size diminishes. The reversibility and probable mechanisms of the slow structural changes, whose rate drastically increase with the electrolyte concentration, are discussed. The obtained results make it possible to improve the method for fractionation of TiO₂ sols based on coagulation with electrolytes.     

Entrapment of Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles in TiO<Subscript>2</Subscript> nanotubes for visible light-driven photocatalysis

In this study, we prepared nanoparticles of the visible light-responsive photocatalyst, Bi₂O₃ entrapped in anatase TiO₂ nanotubes (Bi₂O₃-in-TNTs) via a vacuum-assisted precursor-filling process followed by annealing. Owing to the unique tubular electronic structure of TiO₂ nanotubes, the interior of the nanotube is in an electron-deficient state, which was confirmed by XPS spectra and H₂-TPR. Electrochemical impedance studies showed that the Bi₂O₃-in-TNTs demonstrated a more efficient separation of photogenerated carriers than when Bi₂O₃ nanoparticles were deposited on the outer wall of TiO₂ nanotubes (Bi₂O₃-out-TNTs). Due to the confinement effect of TiO₂ nanotubes, which inhibits photogenerated carriers’ recombination, the Bi₂O₃-in-TNTs exhibited a better photocatalytic performance for the photo-degradation of methyl orange under visible light compared to Bi₂O₃-out-TNTs.     

In situ synthesis and characterization of TiO<Subscript>2</Subscript> nanoarray films

Based on anodic aluminum oxide (AAO) templates prepared in different acidic solutions, highly ordered aligned titania nanotubes array films have been successfully prepared by the liquid phase deposition method. The effect of AAO template type on the microstructure of titania film have been studied. Using the template with a certain volume fraction of Al₂O₃ (less than 0.71), ordered aligned titania nanotubes were obtained, characterized with an outer diameter of 200 nm and an inner diameter of 100 nm, respectively. However, titania existed as ordered aligned nanorods with the diameter of 100 nm when the template with large volume fraction of Al₂O₃ (larger than 0.71) was used. TiO₂ thin films calcined at 400°C for 4 h have an anatase phase and exhibit good photocatalytic activity, i.e., 75% methylene blue could be degraded under ultraviolet irradiation for 2 h.