Large Lamb wave band gap in phononic crystals thin plates

We suggest that Lamb wave band gaps in one-dimensional phononic crystals can be substantially enlarged by using multiple heterostructures which consist of several pieces of phononic crystal with different ratios of the thickness to the lattice period. This is possible because each substructure shows a different band gap and the band structure of a Lamb wave is strongly affected by the ratio of the plate thickness to the lattice period. This effect has been demonstrated by using finite element simulations on two different one-dimensional systems. PACS 63.20.-e; 62.65.+k; 41.20.Jb; 43.20.+g     

Lamb wave band gaps in locally resonant phononic crystal strip waveguides

Using finite element method, we have made a theoretically study of the band structure of Lamb wave in a locally resonant phononic crystal strip waveguide with periodic soft rubber attached on the two sides of epoxy main plate. The numerical results show that the Lamb wave band gap based on local resonant mechanism can be opened up in the stub strip waveguides, and the width of the local resonant band gap is narrower than that based on the Bragg scattering mechanism. The results also show that the stub shape and width have influence on the frequency and width of the Lamb wave band gap.     

复合兰姆波声子晶体中超宽部分禁带

兰姆波在声子晶体薄板中的传播特性因其在无损检测、 减振技术和传感器件等领域的潜在应用价值而受到越来越多的关注. 本文采用超原胞平面波展开法和有限元法系统地研究了复合对称结构声子晶体薄板中的兰姆波超宽部分禁带. 结果表明: 对于在薄板侧面对称地嵌入双层矩形空气柱构成的复杂系统, 低阶兰姆波部分带隙结构极为丰富. 将晶格常数(L)和板厚(H) 比值具有匹配关系的兰姆波声子晶体衔接构成复合结构, 低阶兰姆波部分禁带宽度因各组分结构的部分禁带交叠而得到显著拓宽, 可在低频超宽频带内实现对特定低阶兰姆波模式良好的模式选择功能. 该研究结果对兰姆波缺陷无损检测中模式优化选择及兰姆波单向导通器件设计等方面具有重要意义.     

Temperature effects on the band gaps of Lamb waves in a one-dimensional phononic-crystal plate (L)

This study investigates the temperature-tuned band gaps of Lamb waves in a one-dimensional phononic-crystal plate, which is formed by alternating strips of ferroelectric ceramic Ba(0.7)Sr(0.3)TiO(3) and epoxy. The sensitive and continuous temperature-tunability of Lamb wave band gaps is demonstrated using the analyses of the band structures and the transmission spectra. The width and position of Lamb wave band gaps shift prominently with variation of temperature in the range of 26 °C-50 °C. For example, the width of the second band gap increases from 0.066 to 0.111 MHz as the temperature is increased from 26 °C to 50 °C. The strong shift promises that the structure could be suitable for temperature-tuned multi-frequency Lamb wave filters.     

Low-frequency band gaps in one-dimensional thin phononic crystal plate with periodic stubbed surface

Using supercell plane wave expansion method, the Lamb wave band structure of one-dimensional thin plate with periodic stubs is investigated. The numerical results show that flat bands will appear and band gap can exist in a low-frequency domain. The position of the flat bands and width of the low-frequency Lamb wave band gap can be tuned by the stub height, plate thickness and filling fraction. The band gap is obtained by opening the folding points of the same plate modes not the crossing point of different plate mode when the stub height is small.     

Flexural vibration band gaps in a thin plate containing a periodic array of hemmed discs

Using a periodic expansion by means of the Bloch theorem, the flexural vibration band gaps are studied in a thin plate with two-dimensional ternary locally resonant structures, i.e. a thin epoxy plate containing a periodic square array of lead discs hemmed around by rubber. The full band gaps of flexural vibration in the thin plate are obtained within which sound and vibration will be forbidden. The numerical results are used to show how the width of the first full band gap depends on the radius ratio of lead disc to hemmed disc, filling fraction, lattice constant (distance between the centers of the nearest lead discs) and thickness of the thin plate. It is observed that the gap width can be changed a lot by modulating these physical parameters.     

二维棋盘格子复式晶格的完全光子带隙研究

设计了一种棋盘格子复式晶格的二维光子晶体：在二维正方形格子中，把截面为正方形的柱子旋转45°，同时在每个原胞中心引入一个圆形截面的柱子构成的光子晶体结构. 用平面波展开计算棋盘格子复式晶格的完全光子带隙，结果表明：棋盘格子复式晶格的完全光子带隙的Δω/ω比值几乎是普通棋盘格子的5倍，完全光子带隙的个数也增加. 与其他复式结构相比较，发现其最佳的Δω/ω比值是一类粗锐复合结构光子晶体的2.1倍. 关键词： 二维光子晶体 复式晶格 完全光子带隙     

Time reversal technique for health monitoring of metallic structure using Lamb waves

Time reversal active sensing using Lamb waves is investigated for health monitoring of a metallic structure. Experiments were conducted on an aluminum plate to study the time reversal behavior of A₀ and S₀ Lamb wave modes under narrow band and broad band pulse excitation. Damage in the form of a notch was introduced in the plate to study the changes in the characteristics of the time reversed Lamb wave modes experimentally. Time–frequency analysis of the time reversed signal was carried out to extract the damage information. A measure of damage based on wavelet transform was derived to quantify the hidden damage information in the time reversed signal. It has been shown that time reversal can be used to achieve temporal recompression of Lamb waves under broadband signal excitation. Further, the broad band excitation can also improve the resolution of the technique in detecting closely located defects. This is demonstrated by picking up the reflection of waves from the edge of the plate, from a defect close to the edge of the plate and from defects located near to each other. This study shows the effectiveness of Lamb wave time reversal for temporal recompression of dispersive Lamb waves for damage detection in health monitoring applications.     

Complete band gaps of phononic crystal plates with square rods

Much of previous work has been devoted in studying complete band gaps for bulk phononic crystal (PC). In this paper, we theoretically investigate the existence and widths of these gaps for PC plates. We focus our attention on steel rods of square cross sectional area embedded in epoxy matrix. The equations for calculating the dispersion relation for square rods in a square or a triangular lattice have been derived. Our analysis is based on super cell plane wave expansion (SC-PWE) method. The influence of inclusions filling factor and plate thickness on the existence and width of the phononic band gaps has been discussed. Our calculations show that there is a certain filling factor (f = 0.55) below which arrangement of square rods in a triangular lattice is superior to the arrangement in a square lattice. A comparison between square and circular cross sectional rods reveals that the former has superior normalized gap width than the latter in case of a square lattice. This situation is switched in case of a triangular lattice. Moreover, a maximum normalized gap width of 0.7 can be achieved for PC plate of square rods embedded in a square lattice and having height 90% of the lattice constant.     

Large complete band gap in two-dimensional phononic crystal slabs with elliptic inclusions

Phononic band structure with periodic elliptic inclusions for the square lattice is investigated based on the plane wave expansion method. The numerical results show the systems composed of tungsten (W) elliptic rods embedded in a silicon (Si) matrix can exhibit a larger complete band gap than the conventional circular phononic crystal (PC) slabs. The phononic band structure of the plate-mode waves and the width of the first complete band gap can be tuned by varying the ratio of the minor axis and the major axis, the orientation angle of the elliptic rods and the thickness of the PC slabs. We also study the band structure of plate-mode waves propagating in two-dimensional (2D) slabs with periodic elliptic inclusions coated on uniform substrate.     

The band gap and transmission characteristics investigation of local resonant quaternary phononic crystals with periodic coating

In this article, the investigation of the Lamb wave propagation in two-dimensional phononic crystals (PCs) composed of an array of periodic coating on a thin plate is presented. Compared with the traditional PCs usually consist of cylindrical scatters with uniform coatings in their exterior structure, the newly exterior coating structures with periodic alternant arrangement of two different materials are proposed. The band structures are calculated using finite element method. We discover that a complete band gap can be exhibited at low frequency. Furthermore, for a finite PCs plate, the computed transmission and resonance spectra shown an evident resonance nature which can be directly related to formation of the low-frequency gaps. The effects of different material parameters and arrangement mode of coating on the acoustic energy transmission and attenuation are also studied. Finally, the experimental transmission spectrum of the periodic coating PCs are also presented and compared with the numerical results. This study will provide useful support to the design of tuning band gaps and isolators in the low-frequency range.     

The Brillouin zones and band gaps of a two-dimensional phononic crystal with parallelogram lattice structure

We present a detailed theoretical study on the acoustic band structure of two-dimensional(2D)phononic crystal.The 2D phononic crystal with parallelogram lattice structure is considered to be formed by rigid solid rods embedded in air.For the circular rods,some of the extrema of the acoustic bands appear in the usual high-symmetry points and,in contrast,we find that some of them are located in other specific lines.For the case of elliptic rods,our results indicate that it is necessary to study the whole first Brillouin zone to obtain rightly the band structure and corresponding band gaps.Furthermore,we evaluate the first and second band gaps using the plane wave expansion method and find that these gaps can be tuned by adjusting the side lengths ratio R,inclined angleθand filling fraction F of the parallelogram lattice with circular rods.The results show that the largest value of the first band gap appears atθ=90°and F=0.7854.In contrast,the largest value of the second band gap is atθ=60°and F=0.9068.Our results indicate that the improvement of matching degree between scatterers and lattice pattern,rather than the reduction of structural symmetry,is mainly responsible for the enhancement of the band gaps in the 2D phononic crystal.     

三维光子晶体典型结构完全禁带的最佳参数理论分析

基于平面波展开法，理论分析了晶格结构、填充率、介电常数比等因素对fcc，diamond，woodpile三种三维光子晶体典型结构完全禁带的影响.三种结构中，fcc结构由于高对称性导致的能级简并，只适用于密堆积排列的反蛋白石结构；diamond结构非常容易产生高带隙率的完全禁带，并且可以通过调节多项参数得到所需的完全禁带；woodpile结构参数调节范围比较宽，为实验制备带来方便.对于不同的三维光子晶体结构，随着介电常数比的增大，完全禁带的宽度和带隙率也会随着增大.还发现了一些以前未引起注意的现象. 关键词： 三维光子晶体 完全禁带 介电常数比 带隙率 平面波展开法     

内插扩张室声子晶体管路带隙特性研究

声子晶体管路的带隙特性,可以实现管路系统在特定频率下的噪声控制.利用二维模态匹配法推导出单个内插扩张室元胞的传递矩阵,结合Bloch定理,得到声子晶体管路的能带结构计算方法;验证了二维方法在计算能带结构时的准确性.研究发现,内插扩张室声子晶体管路存在布拉格带隙和局域共振带隙.进一步研究了晶格常数以及内插管长度对能带结构的影响,结果表明,晶格常数主要控制布拉格带隙,而内插管长度对局域共振带隙有较大的影响,并研究了两种参数变化下的带隙耦合.研究结果可以为管路降噪设计提供新的思路.     

Photonic band structure in the nearly plane wave approximation

For photons propagating in a periodic dielectric lattice, the dispersion curve forms photonic bands separated by forbidden gaps. When the dielectric lattice deviates only slightly from being homogenous, the photonic band structure resembles the linear dispersion relation for photons folded into the first Brillouin zone, i.e., the so-called empty lattice bands. Using group theoretical technique, we calculate the splitting of the accidental degeneracies in the empty lattice bands at symmetry points for a simple cubic dielectric lattice. Received 23 June 1998     

Investigation the effect of lattice angle on the band gap width in 3D phononic crystals with rhombohedral(I) lattice

In this paper, the propagation of acoustic waves in the phononic crystal of 3D with rhombohedral(I) lattice is studied theoretically. The crystal composite constituted of nickel spheres embedded in epoxy. The calculations of the band structure and density of states are performed with the plane wave expansion method in the irreducible part of Brillouin zone. In the present work, we have investigated the effect of lattice angle on the band structure and width of the band gap rhombohedral(I) lattice in the irreducible part of the first Brillouin zone and its planes separately. The results show that more than one complete band gape are formed in the four planes of the irreducible part. The most complete band gaps are formed in the (111) plane and the widest complete band gap in (443) with an angle greater than 80 \(^{\circ }\) . So, if the sound passes through the (111) and (443) planes for the lattice angle close to 90 \(^{\circ }\) , the crystal phononic displays the excellent insulation behavior. Moreover, in the other planes, the lattice angle does not affect on the width and the number of band gaps. Also, for the filling fraction 5 %, the widest complete band gap is formed. These results are consistent with the effect of symmetry on the band gap width, because the (111) plane has the most symmetry.     

二维光子晶体禁带特性研究

采用平面波展开法对二维光子晶体分别在E和H极化下的带隙进行了计算. 考虑了填充比、晶格结构、介电常数对最大绝对帯隙的影响. 结果表明,不论是正方晶格还是三角晶格,TM模在介质柱型光子晶体中更容易形成带隙;TE模在空气孔型光子晶体中更容易形成带隙. 填充比一定,最大绝对帯隙宽度并非随着介电常数增大总是增大,而是存在一个峰值. 相对介电常数一定,最大绝对帯隙宽度随填充比的变化也存在一个峰值. 不论空气孔型还是介质柱型结构,三角晶格比正方晶格更容易形成帯隙. 关键词： 平面波展开法 TE模 TM模 最大绝对帯隙     

Acoustic band pinning in the phononic crystal plates of anti-symmetric structure

Acoustic bands are studied numerically for a Lamb wave propagating in an anti-symmetric structure of a one-dimensional periodic plate by using the method of supercell plane-wave expansion. The results show that all the bands are pinned in pairs at the Brillouin zone boundary as long as the anti-symmetry remains and acoustic band gaps (ABGs) only appear between certain bands. In order to reveal the relationship between the band pinning and the anti-symmetry, the method of eigenmode analysis is introduced to calculate the displacement fields of different plate structures. Further, the method of harmony response analysis is employed to calculate the reference spectra to verify the accuracy of numerical calculations of acoustic band map, and both the locations and widths of ABGs in the acoustic band map are in good agreement with those of the reference spectra. The investigations show that the pinning effect is very sensitive to the anti-symmetry of periodic plates, and by introducing different types of breakages, more ABGs or narrow pass bands will appear, which is meaningful in band gap engineering.     

一种多频局域共振型声子晶体板的低频带隙与减振特性

设计了一种多频局域共振型声子晶体板结构, 该结构由一薄板上附加周期性排列的多个双悬臂梁式子结构而构成. 由于多个双悬臂梁式子结构的低频振动与薄板振动的相互耦合作用, 这种局域共振型板结构可产生多个低频弯曲波带隙(禁带); 带隙频率范围内的板弯曲波会被禁止传播, 利用带隙可以实现对薄板的多个目标频率处低频减振. 本文针对这种局域共振型板结构进行了简化, 并基于平面波展开法建立了其弯曲波带隙计算理论模型; 基于该模型, 结合具体算例进行了带隙特性理论分析. 设计、制备了一种存在两个低频弯曲波带隙的局域共振型板结构样件, 通过激光扫描测振仪测试证实该结构存在两个低频带隙, 在带隙频率范围的板弯曲振动被显著衰减.     

Design and optimization of 2D photonic crystal waveguides based on silicon

The existence and properties of photonic band gaps was investigated for a square lattice of dielectric cylinders in air. Band structure calculations were performed using the transfer matrix method as function of the dielectric constant of the cylinders and the cylinder radius-to-pitch ratio r/a. It was found that band gaps exist only for transverse magnetic polarization for a dielectric contrast larger then 3.8 (index contrast >1.95). The optimum r/a ratio is 0.25 for the smallest index contrast. For silicon cylinders (n = 3.45) the widest gap is observed for r/a = 0.18. Band structure calculations as function of r/a show that up to four gaps open for the silicon structure. The effective index was obtained from the band structure calculations and compared with Maxwell–Garnett effective medium theory. Using the band structure calculations we obtained design parameters for silicon based photonic crystal waveguides. The possibility and limitations of amorphous silicon, silicon germanium and silicon-on-insulator structures to achieve index guiding in the third dimension is discussed.