The evaluation and comparison of trigonal and linear tricationic ion-pairing reagents for the detection of anions in positive mode ESI-MS

A general and sensitive method for detecting divalent anions by ESI-MS and LC/ESI-MS as positive ions has been developed. The anions are paired with tricationic reagents to form positively charged complexes. In this study, four tricationic reagents, 2 trigonal and 2 linear, were used to study a wide variety of anions, such as disulfonates, dicarboxylates, and inorganic anions. The limits of detection for many of the anions studied were often improved by tandem mass spectrometry. Tricationic pairing agents can also be used with chromatography to enhance the detection of anions. The tricationic reagents were also used to detect monovalent anions by monitoring the doubly charged positive complex. The limits of detection for some of the divalent anions by this method are substantially lower than by other current analytical techniques.     

Simultaneous detection of monovalent anions and cations using all solid-state contact PVC membrane anion and cation-selective electrodes as detectors in single column ion chromatography

The overall efficiency of ion chromatographic procedures allows the possibility of routine separation and detection of common inorganic and organic anions and cations at low levels in a simultaneous system. A simple and rapid independent separation, and sensitive simultaneous detection of monovalent common anions and cations were achieved using 2 mM copper sulfate, (at pH: 5.40), as eluent with low cell-volume potentiometric detectors. This was established using all-solid state contact, tubular, PVC-matrix membrane anion and cation-selective electrodes in series as detectors with mixed-bed ion-exchange column in ion chromatography. The developed method is reproducible and highly selective to monovalent anions and cations, and takes less than 8 min. Under all operation conditions, the detection limits of the developed method, for potassium, rubidium, cesium, thallium(I), nitrite, nitrate, benzoate and bromide, were of the order of tens of ppb, for sodium, ammonium, chloroacetate, cyanate and chloride ions, values were of the order of hundreds of ppb for an injected volume of 20 mul. The method was flexible since most of anions do not interfere the detection of cations and most of cations do not affect the detection of anions, so that the method can be applied to many sample types e.g. environmental. The application of the method for river, sea and tap water samples were illustrated.     

Determination of anions with capillary electrophoresis and indirect ultraviolet detection

A method is validated for the determination of anions with capillary electrophoresis (CE) in combination with indirect UV detection. The method described here is used for the analysis of eight of the most common anions (fluoride, chloride, bromide, sulphate, nitrate, nitrite, thiosulphate and phosphate). Next, the method is compared with a another buffer system for the determination of anions with CE and indirect UV detection. Typical limits of detection are obtained between 1 and 3 mg/l for the above-mentioned compounds. The repeatability and reproducibility of the system differs per compound and is, with the exception of fluoride and phosphate, between 4 and 6% and 5–10%, respectively. Linearity was observed between 1 and 10 mg/l. The method is applied for the determination of anions in drinking water, serum and urine.     

离子法测定高氯气田水中的氯离子及其他痕量无机阴离子

 研究了高氯气田水样中的Cl-及痕量F-,Br-,I-和SO42 -的离子分析方法。选择的条件为 :亲水性较强的IonPacAS11阴离子交换分离柱分离 ,氢氧化钠梯度淋洗 ,自动再生抑制型电导检测。样品通过 0 4 5 μm微孔滤膜过滤和DionexOnGuardRPC18反相小柱处理。方法具有良好的线性 (相关系数在 0 9994～ 0 9999)和重复性 (相对标准偏差小于 3 3% ) ,加标平均回收率在 98 4 %～ 10 2 1%。方法简便实用 ,用于实际样品分析 ,所得结果令人满意。     

Optimization of single-column anion chromatography with indirect ultraviolet photometric and fluorimetric detection

Optimization of single-column anion chromatography with indirect photometric and indirect fluorimetric detection is described. A simplex algorithm is used for signal maximization with eluent concentration, pH and flow rates as dependent variables. Absolute detection limits obtained for chloride, nitrite, nitrate and sulphate by indirect photometric detection were 1.0, 1.2, 1.4, and 2.0 ng, respectively. The use of single-beam indirect fluorimetric detection of these anions is also demonstrated. The method was applied to the detection of anions arising from gaseous acids or atmospheric aerosols.     

Separation of anions by ion-interaction chromatography with a novel cationic/zwitterionic eluent

Inorganic and organic anions can be separated on an ordinary silica C18 column using a mobile phase containing tetrabutylammonium hydroxide (TBAH) and an aminosulfonic acid zwitterion reagent (MOPS). The pH of this eluent is close to 7 and the background conductivity is about 50 microS, which is low enough to permit anion analyte detection by direct conductivity. Linear calibration curves were obtained for the six anions studied and detection limits ranged from 0.075 to 0.15 mg/l (ppm) for the five inorganic anions. The method was applied to the determination of water-soluble anions in aerosol samples at concentrations as low as 0.3 mg/l.     

离子色谱法测定浓碱中痕量阴离子

浓碱中痕量阴离子的测定在化学化工和半导体工业中非常重要,而常规测定浓碱中阴离子的方法是采用分光光度法和浊度法。采用这些方法只能逐一对样品中的阴离子进行分析测定[1],不仅烦琐费时,而且测定结果往往不准确。离子色谱对于测定常规阴离子具有很高的灵敏度和较低的检出限,     

Determination of glycerophosphate and other anions in dentifrices by ion chromatography

Simple, reliable and sensitive analytical methods to determine the anions, such as fluoride, monofluorophaosphate, glycerophosphate related to anticaries are necessary for basic investigations of anticaries and quality control of dentifrices. A method for the simultaneous determination of organic acids, organic anions and inorganic anions in the sample of commercial toothpaste is proposed. Nine anions (fluoride, chloride, nitrite, nitrate, sulfate, phosphate, monofluorophaosphate, glycerophosphate and oxalic acid) were analyzed by means of ion chromatography using a gradient elution with KOH as mobile phase, IonPac AS18 as the separation column and suppressed conductivity detection. Optimized analytical conditions were further validated in terms of accuracy, precision and total uncertainty and the results showed the reliability of the IC method. The relative standard deviations (RSD) of the retention time and peak area of all species were less than 0.170 and 1.800%, respectively. The correlation coefficients for target analytes ranged from 0.9985 to 0.9996. The detection limit (signal to noise ratio of 3:1) of this method was at low ppb level (<15 ppb). The spiked recoveries for the anions were 96-103%. The method was applied to toothpaste without interferences.     

[2]Pseudorotaxane-Based Supramolecular Optical Indicator for the Visual Detection of Cellular Cyanide Excretion

Cyanide is extremely hazardous to living organisms and the environment. Owing to its wide range of applications and high toxicity, the development of functional materials for cyanide detection and sensing is highly desirable. Host–guest complexation between bis(p-phenylene)-34-crown-10 H and N-methylacridinium salt G remarkably decreases the detection limit for cyanide anions compared with that of the guest itself. The [2]pseudorotaxane selectively recognizes the cyanide anion with high optical sensitivity as a result of the nucleophilic addition of the cyanide anion at the 9-position of G . The host–guest complexation is further incorporated into supramolecular materials for the visual detection of cyanide anions, especially the detection of cellular cyanide excretion with a detection limit of 0.6 μm . This supramolecular method provides an extremely distinct strategy for the visual detection of cyanide anions.     

Potential of CE for the determination of inorganic and acidic anions in cyanoacrylate adhesives

In this work, a CZE method with indirect UV detection was developed for the simultaneous determination of the inorganic and acidic anions, chloride, sulfate, nitrate, fluoride, formate, phosphate, diethylphosphate, methyl sulfonate, cyanoacetate, and methacrylate present in cyanoacrylate adhesives. Chromate was employed as the probe ion, and the EOF was reversed by incorporating CTAB into BGE. Detection limits of 0.7-4.6 microg/mL were obtained for all the anions studied. The CE method developed is a significant improvement on traditionally used chromatographic methods such as ion chromatography, as it resulted in shorter analysis times with enhanced separation efficiencies. This method was successfully employed for the analysis of inorganic and acidic anions in cyanoacrylate adhesive samples.     

Determination of thiosulfate, thiocyanate and polythionates in a mixture by ion-pair chromatography with ultraviolet absorbance detection

A sensitive ion chromatographic method has been developed for the determination of mixtures of thiosulfate, thiocyanate and polythionates (tri-, tetra-, penta- and hexathionate). The proposed method is based on the separation of the sulfur anions on an octadecylsilica (ODS) column with an acetonitrile-water mobile phase containing tetrapropylammonium salt (TPA) as an ion-pairing reagent and the ultraviolet absorption detection of the sulfur anions. When an acetonitrile-water (20:80, v/v) solution (pH 5.0) containing 6 mM TPA was used as a mobile phase at flow-rate of 0.6 ml min(-1), the sulfur anions were resolved within 22 min. The detection limits defined at S/N=3 and 230 nm were very low for all anions, except trithionate: 30 nM for thiosulfate, 60 nM for thiocyanate, 20 nM for tetrathionate, 15 nM for pentathionate and 18 nM for hexathionate. The proposed method gave recoveries ranging from 95.0 to 105.0% when applied to the determination of polythionates added to hot spring waters.     

Determination of inorganic and organic anions in one run by ion chromatography with column switching

A method for the simultaneous determination of low-molecular-mass organic and inorganic anions in aqueous solutions was developed using isocratic ion chromatography (IC) with suppressed conductimetric detection and column switching. Owing to the large differences in distribution coefficients between sulphate, nitrate and phosphate and the other species, these ions are separated in the first stage on a medium-capacity anion exchanger, whereas the other anions are led through a second column packed with a high-capacity anion-exchange resin via a column-switching valve. After optimization of the switching procedure a spiked drinking water sample was analysed. Fluoride, acetate, butyrate, formate, nitrate, nitrite and phosphate could be determined in addition to the main anions (chloride and sulphate). The time for a complete analysis is less than 20 min and the method can easily be automated. The precision and detection limit are as usual in IC with background suppression.     

Separation and indirect ultraviolet detection of common fluorine-containing anions by ionic liquids in reversed-phase chromatography

Abstract

A new approach for the simultaneous separation and indirect ultraviolet detection of four common fluorine-containing anions using 1-hexyl-3-methylimidazolium chloride as a mobile phase additive in reversed-phase chromatography was developed. The principle of separation and detection is that fluorine-containing anions and imidazolium cations form ion-pairs with ultraviolet absorption. Under the optimal determining conditions, the limits of detection for tetrafluoroborate, hexafluorophosphate, trifluoroacetate, and trifluoromethane sulfonate were 0.6, 0.6, 1.5, and 3.1?µmol/L, respectively. The approach has been successfully applied to the determination of these anions in ionic liquid samples, and the spiked recovery was between 98.5 and 102.6%. The detection limit, linearity, reproducibility, and accuracy of the approach are suitable for quantitative analysis. The method is simple and easy to popularize because of the use of a common C₁₈ reversed-phase column and ultraviolet detector.     

Ionic liquids as mobile phase additives for determination of thiocyanate and iodide by liquid chromatography

An analytical method was developed for the simultaneous determination of thiocyanate and iodide by reversed‐phase liquid chromatography with UV detection using imidazolium ionic liquids as mobile phase additives. The chromatographic behaviors of the two anions on a C₁₈ column were studied and compared with four types of reagents including imidazolium ionic liquids, pyridinium ionic liquids, 4‐aminophenol hydrochloride and tetrabutylammonium as mobile phase additives. The effects of the concentrations of imidazolium ionic liquids, organic solvents and detection wavelength on separation and detection of the anions were investigated. The role of ionic liquids, retention rules and mechanisms were discussed. The separation of the anions was performed on the C₁₈ reserved‐phase column using acetonitrile‐0.3 mmol/L 1‐amyl‐3‐methylimidazolium tetrafluoroborate (10:90, v/v) as mobile phase, with column temperature of 35°C, flow rate of 1 mL/min and detection wavelength of 210 nm. Under these conditions, the two anions can be completely separated within 6 min. The limits of detection were 0.05 mg/L. The method was applied for the determination of thiocyanate and iodide in ionic liquid samples and iodide drugs, and the spiked recoveries ranged from 97 to 101%. The method is simple, accurate and meets the requirements of quantitative analysis for thiocyanate and iodide.     

Analysis of quaternary ammonium and phosphonium ionic liquids by reversed-phase high-performance liquid chromatography with charged aerosol detection and unified calibration

Several hydrophobic ionic liquids (ILs) based on long-chain aliphatic ammonium- and phosphonium cations and selected aromatic anions were analyzed by reversed-phase high-performance liquid chromatography (RP-HPLC) employing trifluoroacetic acid as ion-pairing additive to the acetonitrile-containing mobile phase and adopting a step-gradient elution mode. The coupling of charged aerosol detection (CAD) for the non-chromophoric aliphatic cations with diode array detection (DAD) for the aromatic anions allowed their simultaneous analysis in a set of new ILs derived from either tricaprylmethylammonium chloride (Aliquat 336) and trihexyltetradecylphosphonium chloride as precursors. Aliquat 336 is a mix of ammonium cations with distinct aliphatic chain lengths. In the course of the studies it turned out that CAD generates an identical detection response for all the distinct aliphatic cations. Due to lack of single component standards of the individual Aliquat 336 cation species, a unified calibration function was established for the quantitative analysis of the quaternary ammonium cations of the ILs. The developed method was validated according to ICH guidelines, which confirmed the validity of the unified calibration. The application of the method revealed molar ratios of cation to anion close to 1 indicating a quantitative exchange of the chloride ions of the precursors by the various aromatic anions in the course of the synthesis of new ILs. Anomalies of CAD observed for the detection of some aromatic anions (thiosalicylate and benzoate) are discussed.     

Determination of oxalate, sulfate and nitrate in honey and honeydew by ion-chromatography

An ion chromatographic method for determining the anions oxalate, sulfate and nitrate in honey and honeydew samples is described. To prevent matrix interference and to isolate the anions a clean-up step using solid-phase extraction on anionic cartridges and eluting with a 0.01 M chromate solution is recommended. The anions are separated on an anionic column with a mobile phase of borate-gluconate buffer and using conductimetric detection. The method is applied to the analysis of samples from different botanical origin.     

Anion-exchange separation and determination of bisphosphonates and related analytes by post-column indirect fluorescence detection

Bisphosphonic acids and their salts can be detected after their liquid chromatographic separation by post-column indirect fluorescence detection (IFD). After separation the analyte is combined with the highly fluorescent Al³⁺–morin (2′,3,4′,5,7-pentahydroxyflavone) solution and fluorescence decreases because of the formation of the nonfluorescent Al³⁺–bisphosphonate complex. The decrease in fluorescence is proportional to the amount of bisphosphonate present. Separation of the multivalent anionic bisphosphonate analytes from other anions and sample matrix is achieved on a strong base anion-exchange column with a strong, basic eluent. The post-column reaction variables, which influence IFD, are identified and optimized for the detection of the bisphosphonates after separation on the anion exchanger. The method is selective, since only a few anions will undergo a reaction with the Al³⁺–morin solution, and sensitive, detection limit for difluoromethylene bisphosphonate, F₂MDP, is 4 ng for S/N=3. The separation–IFD method can be applied to the determination of bisphosphonates, such as F₂MDP, ethane-1-hydroxy-1,1-bisphosphonic acid, dichloromethylene bisphosphonic acid, 4-amino-1-hydroxybutane-1,1-bisphosphonic acid, in biological samples. The separation–IFD method is also applicable to the detection of inositol phosphate anions.     

邻苯二甲酸为背景吸收电解质的毛细管电泳法测定低分子量肝素中的阴离子

在生产和贮存低分子量肝素的过程中,糖链上的硫酸酯基团会被水解而损失活性,因此肝素样品中常可以检测到游离的硫酸根离子,此外在生产过程中还会引入其他阴离子。为了检测低分子量肝素的质量稳定性,常用离子色谱检测低分子量肝素中游离的阴离子。但是相对分子质量较大的低分子量肝素会污染离子色谱柱和抑制器。为此发展了一种灵敏的毛细管电泳方法用于测定低分子量肝素中游离的SO~(2-)_4、Cl~-、F~-、PO~(3-)_4和OAc~-。不同于常用的背景吸收离子铬酸根,采用邻苯二甲酸根作为背景吸收电解质。与铬酸根相比,邻苯二甲酸根与所有待测阴离子电泳淌度匹配得更好,因此可以获得较窄的峰形。而且邻苯二甲酸根在230 nm检测波长下的摩尔吸光系数(4 754 L/(mol·cm))比铬酸根(254 nm,2 400 L/(mol·cm))高。因此,可以将毛细管电泳检测阴离子的灵敏度提高到与离子色谱法相当的水平。通过验证,该方法在0.002~1 mmol/L的浓度范围内具有较好的线性关系,日内(n=6)和日间(n=3)迁移时间和峰面积的相对标准偏差均小于3%。所测阴离子的检出限(S/N=3)和定量限(S/N=10)分别为0.4~0.8μmol/L和2~4μmol/L。该方法可用于监测低分子量肝素的稳定性。     

Determination of inorganic anions in natural water by microcolumn ion chromatography with on-column enrichment.

An on-column enrichment method was developed for the rapid determination of inorganic anions in natural water. The system was assembled from a syringe pump, a six-port switching valve with a sample-enrichment loop, a separation column and a UV detector. The enrichment efficiency of the system was tested by using inorganic anions as samples. The limits of detection were between 0.6 and 7.7 microg/L. The system was applied to the determination of anions in river and pond-water samples.     

Analysis of oxyhalide disinfection by-products and other anions of interest in drinking water by ion chromatography.

The US Environmental Protection Agency is developing regulations for various drinking water disinfection by-products (DBPs). This effort involves developing analytical methods for the DBPs formed as a result of different disinfection treatments and collecting occurrence data for these species. Ion chromatography is one method being used to analyze drinking water samples for the following inorganic DBPs: chlorite, chlorate and bromate. These anions, however, are difficult to separate from common interfering anions of chloride, carbonate and nitrate. A method is therefore presented by which tetraborate/boric acid is used to separate these anions. Method detection limits of the order of 10 micrograms/l, using conductivity and UV detection were obtained. Stability studies of chlorite showing the effectiveness of ethylenediamine as a preservative and summary data for an occurrence of nitrite, nitrate and the DBP precursor bromide are presented.