Direct electrochemistry and electrocatalysis of hemoglobin on undoped nanocrystalline diamond modified glassy carbon electrode

Direct electrochemistry of hemoglobin (Hb) was observed at glassy carbon electrode (GCE) modified with undoped nanocrystalline diamond (UND) and Hb multilayer films via layer-by-layer assembly. UV-VIS absorbance spectroscopy, electrochemical impedance spectroscopy and cyclic voltammograms were employed to characterize the film. The results showed that the UND had the effect of enhancing the electron transfer between Hb and the electrode surface. Hb in the multilayer films maintained its bioactivity and structure. It also exhibited a good catalytic activity towards the reduction of H(2)O(2). The reciprocal of catalytic current showed a linear dependence on the reciprocal of H(2)O(2) concentration ranging from 0.5 microM to 0.25 mM with a detection limit of 0.4 microM. The apparent Michaelis-Menten constant was estimated to be 0.019 mM.     

Hemoglobin on phosphonic acid terminated self-assembled monolayers at a gold electrode: immobilization, direct electrochemistry, and electrocatalysis

Phosphonic acid (--PO(3)H(2)) terminated self-assembled monolayers (SAMs) on a gold surface were used as a functional interface to immobilize hemoglobin (Hb). In situ surface-enhanced infrared absorption spectroscopy (SEIRAS) measurements show that Hb immobilization is a sluggish process due to formation of multilayer Hb structures on the PO(3)H(2)-terminated SAMs, as revealed by ellipsometry, atomic force microscopy (AFM), and cyclic voltammetry (CV). In the multilayered Hb film, the innermost Hb molecules can directly exchange electrons with the electrode, whereas Hb beyond this layer communicates electronically with the electrode via protein-protein electron exchange. In addition, electrochemical measurements indicate that immobilization of Hb on the PO(3)H(2)-terminated SAMs is not driven by the electrostatic interaction, but likely by hydrogen-bonding interaction. The immobilized Hb molecules show excellent bioelectrocatalytic activity towards hydrogen peroxide, that is, the PO(3)H(2)-terminated SAMs are promising for construction of third-generation biosensors.     

基于血红蛋白/硒化镉量子点多层膜的H2O2生物传感器

合成了水溶性硒化镉(CdSe)量子点,利用组装技术和静电吸附作用,将带正电荷的血红蛋白(Hb)和带负电荷的CdSe量子点层层组装到壳聚糖(chit)修饰的玻碳电极(GCE)表面,构建基于{Hb/CdSe}n多层膜的无电子媒介体的电流型生物传感器({Hb/CdSe}3/chit/GCE).运用紫外-可见吸收光谱、电致化学发光、交流阻抗和循环伏安技术来表征修饰膜,并研究传感器的作用机理、性能及分析应用.结果表明:与量子点薄膜法及量子点/血红蛋白复合物法等固载血红蛋白的其他方法相比,层层组装法能显著提高血红蛋白的固定量,保持血红蛋白的生物活性,增强传感器的灵敏度和稳定性.传感器检测H2O2的线性范围为4.0×10-8～4.8×10-6 mol·L-1(r=0.999 1),检测限为2.0×10-8mol·L-l.多层膜的电致化学发光研究,表明修饰电极有望用于电致化学发光传感器的制备.     

O2 Binding and Dissociation and Ligand Exchange Reaction of O2 with CO in Polymer Composite Films of Hemoglobin

A polymer composite film of hemoglobin (Hb–polymer film) was prepared by the casting of an Hb–polymer mixed solution (weight ratio of Hb to polymer is 1 to 1). The percentages of O₂ and CO saturation of the Hb–dextran film were 46% and 70%, respectively. In the Hb solution, 100% saturation was observed for both ligands, and a humidified Hb–dextran film also showed 100% saturation. Water molecules would provide flexibility to the matrix polymer and promote a structural change in the Hb from a tense state (T) to a relaxed state (R). Thus the ligand binding to the Hb in the polymer films was strongly affected by the degree of interaction of Hb with the matrix polymers and the physical properties of the polymers. Inositol hexaphosphate (IHP) worked as an allosteric effector even in the solid polymer film and lowered the oxygen affinity of Hb. The O₂ transport through an Hb–polyethyleneimine (PEI) film with IHP showed the facilitated O₂ transport in comparison with the film without IHP because of the high dissociation rate of O₂ from Hb with IHP. © 1997 John Wiley & Sons, Ltd.     

Liquid phase deposition of hemoglobin/SDS/TiO2 hybrid film preserving photoelectrochemical activity

This work demonstrates that liquid phase deposition (LPD) technique provides a novel approach to the immobilization of hemoglobin (Hb) in TiO(2) film for studying the direct electron transfer of Hb. Using the LPD process, a hybrid film composed of Hb, TiO(2) and sodium dodecylsulfonate (SDS) is successfully prepared on the electrode surface. The surface morphology of as-deposited Hb/SDS/TiO(2) film shows a flower-like structure. The cyclic voltammetric measurement indicates that the LPD hybrid film facilitates the electron transfer of Hb, which yields a pair of redox peaks prior to the characteristic voltammetric peaks of TiO(2). Due to the electrocatalytic activity of Hb towards H(2)O(2), the Hb/SDS/TiO(2) hybrid LPD film can be utilized as an H(2)O(2) sensor, showing a sensitive response linearly proportional to the concentration of H(2)O(2) in the range of 5.0×10(-7)-4.0×10(-5) mol/L. At the same time, the Hb/SDS/TiO(2) hybrid film preserves the photoelectrochemical activity of TiO(2). The photovoltaic effect on the electrochemical behavior of Hb/SDS/TiO(2) film is observed after long-time UV irradiation on the film, which could improve the calibration sensitivity for H(2)O(2).     

Study on the enhancement of catalytic activity for hemoglobin by quinhydrone in poly(o-aminophenol) film

Hemoglobin (Hb) and quinhydrone (QHQ) were incorporated in poly(o-aminophenol) [o-AP, POAP] film by electropolymerization of o-aminophenol in a weak acid solution containing Hb and QHQ. The nonconducting polymer film was found to be nearly rigid by piezoelectric quartz crystal (PQC) impedance. Therefore, the thickness of the Hb-QHQ-POAP film was estimated as about 104 +/- 10 nm by quartz crystal microbalance (QCM). The QHQ mediation effects on the biomacromolecule Hb entrapped in the POAP film were investigated by using cyclic voltammetry, amperometric technique and kinetic study. Cyclic voltammograms showed that the redox peaks in the Hb-QHQ-POAP film are much more reversible than those in the Hb-POAP film. The response current of the Hb-QHQ-POAP film to H(2)O(2) was almost twice than that of the Hb-POAP film. The Michaelis-Menten constant and the activation energy of Hb in the Hb-QHQ-POAP film are 7.47 mM and 13.91 kJ/mol, respectively, both are smaller than that in the Hb-POAP film. These results showed that the immobilized Hb in POAP film exhibited higher catalytic activity to H(2)O(2) due to the mediation of QHQ.     

Electrochemistry and Electrocatalysis of Hemoglobin on 1‐Pyrenebutanoic Acid Succinimidyl Ester/Multiwalled Carbon Nanotube and Au Nanoparticle Modified Electrode

A biocompatible nanocomposite film was fabricated for hemoglobin (Hb) molecules immobilization. This film consists of multiwalled carbon nanotubes (MWNTs), 1‐pyrenebutanoic acid, succinimidyl ester (PASE), hemoglobin (Hb) and Au nanoparticles (AuNPs). Herein, PASE molecules physically adsorbed onto MWNTs, and its groups then covalently bond with Hb. AuNPs were then linked with Hb/PASE/MWNTs via electrostatic adsorption force. UV‐visible adsorption spectra, Fourier transform infrared spectra, scanning electron microscope and electrochemical impedance spectroscopy have characterized the film. Cyclic voltammetry (CV) scans showed that in the film Hb has well‐defined redox reaction, with the formal potential (E°) at about ?0.27 V (vs. Ag/AgCl). Herein, differential pulse voltammetry (DPV) was employed to electrochemically detect the Hb in the film with a detection limit of 9.3×10^?8 M. The proposed method was also succeeded for Hb detection in clinical blood samples. Furthermore, the Hb in the film showed good electrocatalytic activities to the reduction of H₂O₂, TCA, NaNO₂ and O₂.     

一种卤键高分子多层膜的层层组装及其稳定性的提高

设计合成了聚甲基丙烯酸2-(4-碘-2,3,5,6-四氟苯氧基)乙酯( PIPEMA)和聚甲基丙烯酸3-(3-吡啶基)丙酯( PPyPMA),经过层层组装和随后的紫外可见光谱的检验,发现可以在丙酮和丁酮中组装PIPEMA/PPyPMA卤键多层膜,但是当以四氢呋喃(THF)或氯仿为组装溶剂时未能获得多层膜.另外,在丁酮中...     

Reagentless Biosensor for Hydrogen Peroxide Based on the Immobilization of Hemoglobin in Platinum Nanoparticles Enhanced Poly(chloromethyl thiirane) Cross‐linked Chitosan Hybrid Film

An unmediated hydrogen peroxide (H₂O₂) biosensor was prepared by co‐immobilizing hemoglobin (Hb) with platinum nanoparticles enhanced poly(chloromethyl thiirane) cross‐linked chitosan (CCCS‐PNs) hybrid film. CCCS could provide a biocompatible microenvironment for Hb and PNs could accelerate the electron transfer between Hb and the electrode. Spectroscopic analysis indicated that the immobilized Hb could maintain its native structure in the CCCS‐PNs hybrid film. Entrapped Hb exhibited direct electrochemistry for its heme Fe(III)/Fe(II) redox couples at ?0.396 V in the CCCS‐PNs hybrid film, as well as peroxidase‐like activity to the reduction of hydrogen peroxide without the aid of an electron mediator.     

Fabrication of Covalently Attached Multilayer Film Electrode Containing Iron Porphyrin and Its Electrocatalysis Toward Sulfite

Construction of a highly stable covalently attached multilayer film electrode containing iron porphyrin was achieved by UV irradiation of ionic self‐assembled multilayer films of diazo‐resins (DAR) and anionic Fe(III)tetrakis(p‐sulfonatophenyl)porphyrin (FeTSPP). The multilayer films had been characterized by UV, IR spectra and cyclic valtammetry. The electrocatalytic transformation of sulfite to SO₄^2? by the multilayer film electrode containing FeTSPP was investigated. In 0.1 M NH₄OH? NH₄Cl buffer solution (pH 8.74) and 0.1 M borate buffer solution (pH 9.18) the electrocatalytic oxidation of sulfite through the multilayer film electrode can be performed. However, in acetate buffer solution (pH 4.0) the electrocatalytic reduction of sulfite by the multilayer film electrode had also good activity. The modified electrode also exhibited a fast response and good stability.     

Direct electrochemistry and electrocatalysis of hemoglobin in a multilayer {nanogold/PDDA}n inorganic–organic hybrid film

A new amperometric biosensor for hydrogen peroxide (H₂O₂) has been developed that is based on direct electrochemistry and electrocatalysis of hemoglobin (Hb) in a multilayer inorganic–organic hybrid film. o-Phenylenediamine (PDA) was electropolymerized onto a glassy carbon electrode (GCE), and then negatively charged nanogold particles and positively charged poly(diallyldimethylammonium chloride) (PDDA) were alternately assembled on the PDA/GCE surface. Finally, Hb was electrostatically adsorbed on the surface of gold nanoparticles. The electrochemical behavior of the resulting biosensor (Hb/{nanogold/PDDA}_n/PDA/GCE) was assessed and optimized. The performance and factors influencing the biosensor were studied in detail. Under optimal conditions, the immobilized Hb displayed good electrocatalytic response to the H₂O₂ reduction ranging from 1.3 μM to 1.4 mM with a detection limit of 0.8 μM (at 3δ). In addition, the biosensor exhibited rapid response, good reproducibility, and long-term stability. Electronic supplementary material to this paper is available in electronic form at Correspondence: Dianyong Tang, Department of Chemistry and Life Science, Leshan Teachers College, Sichuan (Leshan) 614000, P.R. China     

Biopolymer and carbon nanotubes interface prepared by self-assembly for studying the electrochemistry of microperoxidase-11

Stable films of biopolymer chitosan and carbon nanotubes were prepared by a layer-by-layer self-assembly technique. Atomic force microscopy, scanning electron microscopy, cyclic voltammetry, and UV-vis spectroscopy were used to characterize the film assembly. Atomic force microscopy and scanning electron microscopy showed that an even, stable film was formed. The UV-vis spectroscopy and cyclic voltammetry study indicated the uniform growth of the film. The property of the self-assembled multilayer film in promoting protein electron transfer was demonstrated by incorporating microperoxidase-11 in the film. Microperoxidase-11 in the multilayer film could transfer electrons with the electrode indicating that carbon nanotubes could wire the protein to the electrode. The electrocatalytic activity of the microperoxidase-11 containing multilayer film-modified electrode toward H(2)O(2) and O(2) was investigated. The results showed that along with the increase in the assembled layers the electrocatalytic reduction potentials of H(2)O(2) and O(2) shifted positively. The prepared multilayer film of chitosan and carbon nanotubes containing protein was a sensitive interface for electrocatalytic study.     

Electrocatalysis of Hemoglobin in ZnO Nanoparticle/Ionic Liquid Composite Film Modified Glassy Carbon Electrode

A nanobiocompatible composite containing hemoglobin (Hb), ZnO nanoparticles (nano‐ZnO) and ionic liquid 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BMIMPF₆) was fabricated and further modified on the glassy carbon electrode (GCE). The electrochemical behaviours of Hb in the composite film were carefully studied and a pair of quasi‐reversible redox peaks appeared in pH 7.0 phosphate buffer solution, which was attributed to the electrode reaction of Hb heme Fe(III)/Fe(II) redox couple. The presences of nano‐ZnO and BMIMPF₆ in the film can retain the bioactivity of Hb and greatly enhance the direct electron transfer of Hb. The immobilized Hb showed high stability and good electrocatalytic ability to the reduction of hydrogen peroxide and O₂.     

Direct Electrochemistry and Electrocatalysis of Hemoglobin in Lipid Film Incorporated with Room‐Temperature Ionic Liquid

A facile phospholipid/room‐temperature ionic liquid (RTIL) composite material based on dimyristoylphosphatidylcholine (DMPC) and 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([bmim]PF₆) was exploited as a new matrix for immobilizing protein. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were adopted to characterize this composite film. Hemoglobin (Hb) was chosen as a model protein to investigate the composite system. UV‐vis absorbance spectra showed that Hb still maintained its heme crevice integrity in this composite film. By virtue of the Hb/DMPC/[bmim]PF₆ composite film‐modified glassy carbon electrode (GCE), a pair of well‐defined redox peaks of Hb was obtained through the direct electron transfer between protein and underlying GCE. Moreover, the reduction of O₂ and H₂O₂ at the Hb/DMPC/[bmim]PF₆ composite film‐modified GCE was dramatically enhanced.     

ZnO-MWCNTs/Nafion Inorganic-organic composite film： Preparation and application in bioelectrochemistry of hemoglobin

Multi-walled carbon nanotubes(MWCNTs) were coated with ZnO by a hydrothermal method.The resulting nanocomposites were mixed with the Nafion solution to form a composite matrix for the fabrication of hemoglobin(Hb) biosensor.To prevent the leak of Hb molecules of the biosensor,silica sol-gel film was coated on the surface of the Hb/ZnO-MWCNTs/Nafion electrode.The silica sol-gel/Hb/ZnO-MWCNTs/Nafion film exhibited a pair of well-defined,quasi-reversible redox peaks.This biosensor showed excellent electroca...     

交联结构对肝素/壳聚糖层层组装多层膜内皮细胞相容性的影响

采用1-乙基-(3-二甲基氨基丙基)碳酰二亚胺交联技术对具有抗凝血抗菌作用的肝素/壳聚糖多层膜进行交联, 研究了交联结构对多层膜稳定性和血管内皮细胞亲和性的影响. QCM-D结果显示, 交联可有效地提高多层膜的稳定性, 在模拟人体血液流速(3.0 cm/s)下保持良好的稳定. 体外内皮细胞的研究结果显示, 多层膜的交联可有效地调节肝素/壳聚糖多层膜表面粘弹性, 并显著增加内皮细胞的粘附与生长. 交联的肝素/壳聚糖多层膜有望成为理想的心血管功能界面涂层材料.     

Fabrication and Characterization of DNA/QPVP‐Os Redox‐Active Multilayer Film

Calf thymus DNA was immobilized on functionalized glassy carbon, gold and quartz substrates, respectively, by the layer‐by‐layer (LBL) assembly method with a polycation QPVP‐Os, a quaternized poly(4‐vinylpyridine) partially complexed with osmium bis(2,2′‐bipyridine) as counterions. UV‐visible absorption and surface plasmon resonance spectroscopy (SPR) showed that the resulting film was uniform with the average thickness 3.4 nm for one bilayer. Cyclic voltammetry (CV) showed that the total surface coverage of the polycations increases as each QPVP‐Os/DNA bilayer added to the electrode surface, but the surface formal potential of Os‐centered redox reaction shifts negatively, which is mainly attributed to the intercalation of redox‐active complex to DNA chain. The electron transfer kinetics of electroactive QPVP‐Os in the multilayer film was investigated by electrochemical impedance experiment for the first time. The permeability of Fe(CN) in the solution into the multilayer film depends on the number of bilayers in the film. It is worth noting that when the multilayer film is up to 4 bilayers, the CV curves of the multilayer films display the typical characteristic of a microelectrode array. The nanoporous structure of the multilayer film was further confirmed by the surface morphology analysis using atomic force microscopy (AFM).     

Fabrication of a stable inorganic-organic hybrid multilayer film with uniform and dense inorganic nanoparticle deposition

A stable inorganic-organic hybrid multilayer film with homogeneous and dense inorganic nanoparticle deposition was constructed by coating ZrO2 nanoparticles with poly(4-sodium styrenesulfonate) (PSS) and irradiating multilayer film assembled from PSS-coated ZrO2 nanoparticles and a diazo-resin (DR).     

Halogen bonding as a new driving force for layer-by-layer assembly

A new approach for fabricating a layer-by-layer polymer film was explored, which was based on the halogen bonding between poly(4-(4-iodo-2,3,5,6-tetrafluorophenoxy)-butyl acrylate) and poly(4-vinylpyridine). Layer-by-layer assembly of two polymers was confirmed by UV-vis spectroscopy and quartz crystal microbalance measurements. The interaction between the two polymers was identified as halogen bonding by X-ray photoelectron spectroscopy. The surface of the multilayer film is flat, and the thickness of one bilayer is about 1.3 nm. We also compared the stability of a halogen-bonded multilayer film in methanol with that of a hydrogen-bonded multilayer film.     

Significantly accelerated direct electron-transfer kinetics of hemoglobin in a C(60)-MWCNT nanocomposite film

The direct electrochemistry of hemoglobin (Hb) was studied in a novel all-carbon nanocomposite film of C(60)-MWCNT (MWCNT=multiple-walled carbon nanotube) and compared with that in bare MWCNT film. The heterogeneous electron-transfer rate constant k(s) of Hb/C(60)-MWCNT was determined to be 0.39 s(-1), which is more than one order of magnitude greater than that of Hb/MWCNT (0.03 s(-1)). The significantly accelerated electron-transfer kinetics are attributed to the mediator role played by C(60), which is finely dispersed on the MWCNT surfaces. The excellent stability of Hb/C(60)-MWCNT was established and its potential application towards the electrocatalytic reduction of O(2) was demonstrated.