可聚合的光引发转移终止剂合成接枝共聚物

采用一种可聚合的光引发转移终止剂 ,2 N ,N 二乙基二硫代氨基甲酰氧基乙酸 β 甲基丙烯酰氧基乙酯 (MAEDCA) ,通过两种途径制备了含有聚甲基丙烯酸甲酯 (PMMA)和聚苯乙烯 (PSt)链段的接枝共聚物 .其一是将MAEDCA作为引发剂 ,在紫外光照射下引发MMA聚合 ,得到大分子单体 ,通过大分子单体与St的共聚合得到 .考察了所用大分子单体的分子量和浓度对共聚合的影响 .其二是将MAEDCA作为单体与MMA共聚得到侧链上含有N ,N 二乙基二硫代氨基甲酰氧基 (DC)基团的无规共聚物 ,P(MMA co MAEDCA) .在紫外光照射下 ,P(MMA co MAEDCA)作为大分子引发剂引发St聚合 ,得到P(MMA co MAEDCA) g PSt的共聚物 ,研究了接枝共聚合过程的活性自由基聚合特征     

窄分布聚丙烯酸-g-聚甲基丙烯酸酯接枝共聚物的合成

利用合成的一种新型原子转移自由基聚合大分子引发剂和从主干接枝的方法制备了窄分布的两亲性接枝共聚物聚丙烯酸-g-聚甲基丙烯酸酯, 并对其结构进行表征. 产物主链和侧链的分子量可分别通过调整单体与引发剂的投料比和反应时间进行控制, 结构规整, 侧链单体适用范围广. 该合成方法不仅推动了接枝共聚物合成研究的进展, 其产物更为两亲性接枝共聚物自组装行为的研究提供了很好的研究对象.     

基于正离子聚合方法设计合成接枝共聚物的研究进展

综述了基于可控/活性正离子聚合方法及通过接出接枝(grafting from)、接出接枝(grafting onto)和大分子单体(macromonomer)三种合成策略来设计制备接枝共聚物的研究进展,详细概括了大分子引发剂结构、支链结构、大分子单体结构、大分子链上引发活性点以及官能基团的分布、支链长度及路易斯酸性质等因素对接枝共聚反应的影响规律和不同接枝共聚物的设计合成,总结了上述三种不同合成路径的各自特点,进一步阐述所制备的接枝共聚物在特定环境中的微观结构、形态与外界条件响应性,探讨接枝共聚物的潜在应用领域。     

聚苯乙烯/有机硅共聚合的研究进展

介绍聚苯乙烯 有机硅嵌段和接枝共聚物不同的合成方法 ,包括阴离子聚合、大分子单体、活性自由基聚合、原子自由基聚合等 ,并对其研究前景做了展望     

大分子单体及其规整接枝共聚物

论述了通过活性阴离子聚合、活性阳离子聚合、基团转移聚合、自由基聚合、缩聚等途径合成各种大分子单体,论讨了大分子单体的表征,并结合自己的工作综合介绍近年来大分子单体共聚的进展及其规整接枝共聚物的纯化和特性。     

EPR-g-PS接枝共聚物的大分子单体共聚物合成及表征

将阴离子聚合所得末端带有烯丙基的窄分布聚苯乙烯大分子单体(PSallyl)与乙烯、丙烯在钒催化体系下进行共聚合,得到聚苯乙烯(PS)支链沿乙丙橡胶(EPR)主干无规分布的接枝共聚物EPR-g-PS。接枝效率为70％左右。大分子单体的分子量、加入量,催化剂浓度和聚合温度等对共聚反应及其产物结构有明显的影响。丁酮为选择沉淀剂可分离未反应的聚苯乙烯大分子单体。用紫外光谱、核磁共振、渗透压和凝胶渗透色谱法测定了纯制接枝共聚物的组成和分子量。结果表明所合成的EPR-g-PS的聚苯乙烯含量为5—45％;支链为分子量1.0—7.8×10~4的窄分布((?)=1.05—1.17)聚苯乙烯;平均支链数为1—4。     

聚丙烯酰胺/聚L-谷氨酸苄酯接枝共聚物的合成及其胶束制备

以聚丙烯酰胺(PAM)为大分子引发剂, 采用开环聚合方法, 在N,N-二甲基甲酰胺(DMF)中引发L-谷氨酸苄酯环内酸酐(BLG-NCA)聚合合成了两亲性聚丙烯酰胺/聚L-谷氨酸苄酯接枝共聚物(PAM-g-BLG), 采用IR, 1H NMR和GPC方法对共聚物结构进行了表征; 用芘作荧光探针, 研究了共聚物胶束的形成及其临界胶束浓度(cmc), 利用动态光散射(DLS)和透射电镜(TEM)研究了胶束的粒径分布和形态. 结果表明, PAM能够引发BLG-NCA开环聚合得到接枝共聚物, 在一定条件下接枝共聚物能够形成球形的稳定胶束, cmc值和胶束粒径随着共聚物中疏水性聚L-谷氨酸苄酯(PBLG)链段含量的增加而减小.     

利用大分子单体技术合成接枝共聚物

大分子单体和小分子共单体共聚是合成接枝共聚物的重要途径之一。本文综述了大分子单体通过各种聚合方式(自由基共聚、离子型共聚、配位共聚、基团转移共聚和逐步共聚)和普通小分子单体的共聚反应,详细讨论了大分子单体和小分子单体的自由基共聚反应动力学,并简要介绍了接枝共聚物的应用背景。     

降冰片烯封端的聚苯乙烯大分子单体与乙烯共聚的初步报告

大分子单体(macromer)共聚合为合成结构确定的接枝共聚物提供了新途径,但用络合催化剂进行共聚的例子很少。前文报导了末端为降冰片烯(NB)的聚苯乙烯大分子单体PS-NB的合成及表征;现报告其与乙烯的共聚,以制备主干为聚乙烯(PE)、支链为聚苯乙烯(PS)的接枝共聚物PE-g-PS的初步结果。     

机理转移法合成星形梳状聚丁二烯-g-聚甲基丙烯酸甲酯共聚物的研究

结合活性负离子聚合与原子转移自由基聚合(ATRP),采用机理转移法制备了一系列窄分布且分子量可控的星形梳状聚丁二烯-g-聚甲基丙烯酸甲酯接枝共聚物(SC-(PB-g-PMMA)).首先通过阴离子聚合,制备星形聚丁二烯,后经甲酸-过氧化氢原位环氧化对链中部分双键进行环氧化,再与原位生成2-溴异丁酸发生酯化反应,得到具有链中活性溴的星形大分子引发剂(SPB-Brn).然后,利用该大分子引发剂,采用CuCl/CuCl2/PMDETA催化体系,通过ATRP聚合单体MMA,合成出星形梳状SC-(PB-g-PMMA)聚合物.通过GPC,1H-NMR和FTIR等分析手段对合成的星形大分子引发剂及星形梳状聚合物进结构表征,证实得到目标产物,并同时研究了聚合物的热力学性质与溶液性质.     

吡啶-芴类电荧光聚合物的光谱特性

用Suzuiki聚合反应将二溴代吡啶 (2 ,5 、2 ,6 、3,5 取代 )与芴共聚 ,合成了不同主链结构的吡啶 芴共聚物 .研究结果表明 ,将吡啶基引人聚芴主链可以调节共聚物的发光颜色 .间位吡啶基引入聚芴主链 ,使聚合物的能级加宽 ,PL、EL光谱发生蓝移 ;对位吡啶基则使光谱红移 .间位吡啶基 (3,5 Py、2 ,6 Py)引入聚芴主链 ,可提高聚合物的色纯度 .共聚物中 3,5 Py含量为 4 0mol%时 ,可得到较纯的蓝光 .     

Theoretical studies on the electronic and optical properties of two new alternating fluorene/carbazole copolymers

Poly(fluorene)-type materials are widely used in polymer-based emitting devices. During operation there appears, however, an additional emission peak at around 2.3 eV, leading to both a color instability and reduced efficiency. The incorporation of the carbazole units has been proven to efficiently suppress the keto defect emission. In this contribution, we apply quantum-chemical techniques to investigate two series of alternating fluorene/carbazole oligomers and copolymers poly[2,7-(N-(2-methyl)-carbazole)-co-alt-2,7-m(9,9-dimethylfluorene)], namely, PFmCz (m = 1,2) and gain a detailed understanding of the influence of carbazole units on the electronic and optical properties of fluorene derivatives. The electronic properties of the neutral molecules, HOMO-LUMO gaps (Delta(H-L)), in addition to the positive and negative ions, are studied using B3LYP functional. The lowest excitation energies (E(g)s) and the maximal absorption wavelength lambda(abs) of PFmCz (m = 1,2) are studied, employing the time-dependent density functional theory (TD-DFT). The properties of the two copolymers, such as Delta(H-L), E(g), IPs, and EAs were obtained by extrapolating those of the oligomers to the inverse chain length equal to zero (1/n = 0). The outcomes showed that the carbazole unit is a good electron-donating moiety for electronic materials, and the incorporation of carbazole into the polyfluorene (PF) backbone resulted in a broadened energy gap and a blue shift of both the absorption and photoluminescence emission peaks. Most importantly, the HOMO energies of PF1Cz and PF2Cz are both a higher average (0.4 eV) than polyfluorene (PF), which directly results in the decreasing of IPs of about 0.2 eV more than PF, indicating that the carbazole units have significantly improved the hole injection properties of the copolymers. In addition, the energy gap tends to broaden and the absorption and emission peaks are gradually blue-shifted to shorter wavelengths with an increase in the carbazole content in the copolymers. This is due to the interruption of the longer conjugation length of the backbone in the (F1Cz)(n) series.     

Mechanically linked polycarbonate

The synthesis, by solid-state copolymerization, and characterization of the first polycatenanes based on a commercial polymer are reported. Various amounts of a benzylic amide [2]catenane, the corresponding macrocycle, and a rigid bisphenol fluorene derivative have been quantitatively and homogeneously incorporated into bisphenol A polycarbonate. The resulting copolymers were characterized by size exclusion chromatography coupled with viscosimetry, (1)H NMR, differential scanning calorimetry, and dynamic mechanical analysis. The unexpectedly small influence of [2]catenane incorporation on the glass transition temperature of the copolymers points to remarkable internal mobility of the catenane comonomer rings. A new relaxation linked to the flexible catenane units is also observed. The studies represent a detailed structural characterization of a polymer containing small amounts of mechanical linkages in its backbone and demonstrate that significant effects can be induced by doping conventional polymers with small percentages (2-6% of repeat units) of flexible catenanes.     

含芴和双酚AF型氮杂萘酮的两亲嵌段聚芳醚砜酮离聚物的合成与性能

采取"二锅二步"的聚合方法以双酚芴、4,4'-二氯二苯砜、双酚AF型二氮杂萘酮、二氟二苯酮磺酸钠为原料制备了含芴-聚芳醚砜憎水链段和双酚AF型二氮杂萘酮-磺化聚芳醚酮亲水链段的两亲嵌段聚芳醚砜酮离聚物,通过调整4种单体的比例以及预聚合、再缩合聚合工艺制备了一系列具有不同链段尺寸的芴-双酚AF型氮杂萘酮-两亲嵌段聚芳醚砜酮离聚物质子交换膜材料.通过黏度测试、傅里叶变换红外光谱(FTIR)、氢谱(1H-NMR)、热失重(TGA)等分析方法,对离聚物的结构和性能进行了表征,用蒸发溶剂法制备了质子交换膜,并考察膜的各种性能.实验结果表明,该系列离聚物的结构可控,热稳定性良好,5 wt%热失重温度均高于250℃;由其制备的质子交换膜具有良好的耐醇性和耐甲醇渗透性能、优异的抗氧化性和水解稳定性、以及适当的质子导电率和吸水率,室温下该系列膜的甲醇渗透率在0.23×10-6～0.28×10-6cm2/s,比Nafion 117具有更好的耐甲醇渗透性能;80℃下该系列膜的质子导电率与30℃时相比呈现倍增趋势,离聚物8e膜的质子导电率在80℃下达到了1.83×10-3S/cm.     

NEW BLUE CROSSLINKABLE POLYMERS FOR ORGANIC LIGHT EMITTING DEVICES

Here, we report on new blue electroluminescence (EL) crosslinkable polymers containing fluorene/phenylene alternating repeating units. Additionally, they contain polymerizable oxetane groups attached through flexible hexyloxy chains to phenylene units of the polymer backbone. The copolymers were synthesized via Pd-catalyzed Suzuki coupling reactions. The copolymers obtained were found to be soluble and easily processable from common organic solvents such as chloroform or toluene and have been characterized by ¹H and ¹³C NMR spectroscopy, FT-IR spectroscopy and elemental analysis. The degree of polymerization has been determined by gel permeation chromatography (GPC). The thermal properties of the copolymers have been characterized by differential scanning calorimetry (DSC). The optical properties of the polymers were investigated in solution by UV/VIS spectroscopy. The polymers were photo-crosslinked in spin-coated thin films to yield insoluble networks.     

芴-苯并噻二唑-苯胺类共聚物的合成与发光性能

用Suzuki缩聚反应分别将窄带隙单元-苯并噻二唑-二苯胺(DPABT)和苯并噻二唑-三苯胺(TPABT)引入聚芴主链,合成了共聚物PF-DPABT和PF-TPABT,并比较了共聚物的发光性能.随着窄带隙单元含量的增加,其特征发射逐渐增强,说明发生了从聚合物主体单元到窄带隙单元有效的能量转移.两种共聚物在低窄带隙单元含量(1mol%)下的电致发光光谱仅出现窄带隙单元的特征发射,PF-DPABT共聚物为650～680nm之间的饱和红光,而PF-TPABT共聚物为590～610nm之间的橙红光,聚芴主体单元的发射被完全淬灭,说明与光致发光过程相比,电致发光过程中的能量转移更完全.基于共聚物PF-DPABT-1及PF-TPABT-5器件的最大外量子效率分别为1.3%和2.0%,器件结构为ITO/PEDOT:PSS/polymer/Ba/Al,是一类有希望的红光材料.     

Triplet-state and singlet oxygen formation in fluorene-based alternating copolymers

Data are reported on the triplet states of a series of fluorene-based A-alt-B type alternating copolymers based on pulse radiolysis-energy transfer and flash photolysis experiments. From the pulse radiolysis experiments, spectra are given for eight copolymers involving phenylene, thiophene, benzothiadiazole, and oligothienylenevinylene groups. Quantum yields for triplet-state formation (PhiT) have been obtained by flash photolysis following laser excitation and in one case by photoacoustic calorimetry. In addition, yields of sensitized formation of singlet oxygen have been determined by time-resolved phosphorescence and are, in general, in excellent agreement with the PhiT values. In all cases, the presence of thiophene units is seen to increase intersystem-crossing quantum yields, probably because of the presence of the heavy sulfur atom. However, with the poly[2,7-(9,9-bis(2'-ethylhexyl)fluorene)-alt-1,4-phenylene] (PFP), thiophene S,S-dioxide (PFTSO2) and benzothiadiazole (F8BT) copolymers, low yields of triplet formation are observed. With three of the copolymers, the energies of the triplet states have been determined. With PFP, the triplet energy is virtually identical to that of poly[2,7-(9,9-bis(2'-ethylhexyl)fluorene)]. In contrast, with fluorene-thiophene copolymers PFaT and PF3T, the triplet energies are closer to those of thiophene oligomers, indicating that there is significant conjugation between fluorene and thiophene units but also that there is a more localized triplet state than with the homopolymers.     

Synthesis and characterization of poly(fluorene)‐based copolymers containing various 1,3,4‐oxadiazole pendants

A series of soluble alternating poly(fluorene)‐based copolymers containing electron‐transporting 1,3,4‐oxadiazole (OXD) and hole‐transporting carbazole pendants attached to the C‐9 position of fluorene units by long alkyl spacers were synthesized. These copolymers possess mesogenic and nonmesogenic pendants attached to a rigid mesogenic poly(fluorene) (PF) backbone. All these polymers exhibit glass‐forming liquid crystalline properties, including the nematic and smectic A (SmA) phases, and reveal much wider mesophasic temperature ranges than that of PF. The thermal properties and mesomorphism of these conjugated polymers are mainly affected by the nature of these pendants, and thus the mesophasic temperature ranges and glass‐forming properties are greatly enhanced by introducing the OXD pendants. In addition, the tendencies of crystallization and aggregation of PF are also suppressed by introducing the OXD pendants. A single layer device with P4 as an emitter shows a turn‐on voltage of 5 V and a bright luminescence of 2694 cd/m² at 11 V with a power efficiency of 1.28 cd/A at 100 mA/cm². © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2700–2711, 2005     

Molecular design of efficient white‐light‐emitting fluorene‐based copolymers by mixing singlet and triplet emission

A new strategy to realize efficient white‐light emission from a binary fluorene‐based copolymer (PF‐Phq) with the fluorene segment as a blue emitter and the iridium complex, 9‐iridium(III)bis(2‐(2‐phenyl‐quinoline‐N,C³′)(11,13‐tetradecanedionate))‐3,6‐carbazole (Phq), as a red emitter has been proposed and demonstrated. The photo‐ and electroluminescence properties of the PF‐Phq copolymers were investigated. White‐light emission with two bands of blue and red was achieved from the binary copolymers. The efficiency increased with increasing concentration of iridium complex, which resulted from its efficient phosphorescence emission and the weak phosphorescent quenching due to its lower triplet energy level than that of polyfluorene. In comparison with the binary copolymer, the efficiency and color purity of the ternary copolymers (PF‐Phq‐BT) were improved by introducing fluorescent green benzothiadiazole (BT) unit into polyfluorene backbone. This was ascribed to the exciton confinement of the benzothiadiazole unit, which allowed efficient singlet energy transfer from fluorene segment to BT unit and avoided the triplet quenching resulted from the higher triplet energy levels of phosphorescent green emitters than that of polyfluorene. The phosphorescence quenching is a key factor in the design of white light‐emitting polyfluorene with triplet emitter. It is shown that using singlet green and triplet red emitters is an efficient approach to reduce and even avoid the phosphorescence quenching in the fluorene‐based copolymers. The strategy to incorporate singlet green emitter to polyfluorene backbone and to attach triplet red species to the side chain is promising for white polymer light‐emitting diodes. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 453–463, 2008     

Aggregation-mediated optical properties of pH-responsive anionic conjugated polyelectrolytes

Conjugated polyelectrolyte copolymers containing 2,1,3-benzothiadiazole- (BT) and oligo(ethylene oxide)-substituted fluorene and phenylene units have been designed and synthesized. The phenylene pendent groups also have carboxylic acid functionalities, which allow probing the effect of pH on optical properties. The BT content in the backbone can be regulated at the synthesis stage. Dynamic light scattering studies show that polymers aggregate in water at low pH. Increased interchain contacts give rise to a lowering of the photoluminescence (PL) efficiency via self-quenching when the BT units are absent and increased levels of FRET from the phenylene-fluorene segments to BT. Furthermore, the PL efficiency of BT increases in the aggregated structures. Examination of solvent effects indicates that the increased BT efficiencies are likely due to decreased contact with water. The changes in PL efficiencies are reversible, showing that the aggregates are dynamic and not kinetically constrained.