“Superpermeability” and “pumping” of atomic hydrogen through palladium membranes

Permeation of atomic as well as molecular hydrogen through palladium membranes has been investigated experimentally in the temperature range from room temperature to 200 °C and at a higher incident flux of hydrogen atoms on palladium surface than in previous studies. The results demonstrate that phenomena of ‘superpermeability’ and ‘pumping’ of atomic gases through metal membranes are of a common nature. A theoretical model based on chemical thermodynamics and diffusion theory adequately describes the quantitative relationships observed in experiments. It was found that permeability of atomic hydrogen depends strongly on the magnitude of surface incident flux and membrane temperature.     

Applications of “Hot” and “Cold” Bis(thiosemicarbazonato) Metal Complexes in Multimodal Imaging

The applications of coordination chemistry to molecular imaging has become a matter of intense research over the past 10 years. In particular, the applications of bis(thiosemicarbazonato) metal complexes in molecular imaging have mainly been focused on compounds with aliphatic backbones due to the in vivo imaging success of hypoxic tumors with PET (positron emission tomography) using ⁶⁴CuATSM [copper (diacetyl‐bis(N4‐methylthiosemicarbazone))]. This compound entered clinical trials in the US and the UK during the first decade of the 21^st century for imaging hypoxia in head and neck tumors. The replacement of the ligand backbone to aromatic groups, coupled with the exocyclic N's functionalization during the synthesis of bis(thiosemicarbazones) opens the possibility to use the corresponding metal complexes as multimodal imaging agents of use, both in vitro for optical detection, and in vivo when radiolabeled with several different metallic species. The greater kinetic stability of acenaphthenequinone bis(thiosemicarbazonato) metal complexes, with respect to that of the corresponding aliphatic ATSM complexes, allows the stabilization of a number of imaging probes, with special interest in “cold” and “hot” Cu(II) and Ga(III) derivatives for PET applications and ¹¹¹In(III) derivatives for SPECT (single‐photon emission computed tomography) applications, whilst Zn(II) derivatives display optical imaging properties in cells, with enhanced fluorescence emission and lifetime with respect to the free ligands. Preliminary studies have shown that gallium‐based acenaphthenequinone bis(thiosemicarbazonato) complexes are also hypoxia selective in vitro, thus increasing the interest in them as new generation imaging agents for in vitro and in vivo applications.     

Heterograft copolymers of poly(ε‐caprolactone) prepared by combination of ATRA “grafting onto” and ATRP “grafting from” processes

This paper aims at reporting on the synthesis of a heterograft copolymer by combining the “grafting onto” process based on atom transfer radical addition (ATRA) and the “grafting from” process by atom transfer radical polymerization (ATRP). The statistical copolymerization of ε‐caprolactone (εCL) and α‐chloro‐ε‐caprolactone (αClεCL) was initiated by 2,2‐dibutyl‐2‐stanna‐1,3‐dioxepane (DSDOP), followed by ATRA of parts of the chlorinated units of poly(αClεCL‐co‐εCL) on the terminal double bond of α‐MeO,ω‐CH₂?CH? CH₂? CO₂‐poly(ethylene oxide) (PEO). The amphiphilic poly(εCL‐g‐EO) graft copolymer collected at this stage forms micelles as supported by dynamic light scattering (DLS) and transmission electron microscopy (TEM). The unreacted pendant chloro groups of poly(εCL‐g‐EO) were used to initiate the ATRP of styrene with formation of copolymer with two populations of randomly distributed grafts, that is PEO and polystyrene. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6015–6024, 2006     

Synthesis of graft copolymers onto styrenic polymer backbone via “grafting from” raft process

A new synthetic methodology is developed for preparing graft copolymers via RAFT polymerization method by the “R group approach” onto styrenic polymers. In this approach, latent sites of the styrenic polymer was brominated first and then converted into macro‐RAFT agents with pyrazole and thio dodecyl as the Z groups. This was used to synthesize graft copolymer such as polystyrene‐graft‐polymethyl methacrylate (PS‐g‐PMMA), polystyrene‐graft‐poly(isobornyl acrylate), polystyrene‐graft‐poly[2‐(acetoacetoxy)ethyl methacrylate] (PS‐g‐PAEMA), and poly(para‐methoxystyrene)‐graft‐polystyrene (P(p‐MS)‐g‐PS). The polymers are characterized by gel permeation chromatography, ¹H NMR, IR, and atomic force microscopy (AFM). The morphology of PS‐g‐PMMA in THF was investigated using AFM and island‐like features were noticed. The AFM studies of the PS‐g‐PAEMA graft copolymers revealed the formation of globules and ribbon‐like morphological features. The PS‐g‐PAEMA graft copolymers form complex with Fe(III) in dimethylformamide and the AFM studies suggest the formation of globular superstructures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Molecular engineering of liquid crystalline polymers by “living” polymerization. XXXII. Synthesis and “living” cationic polymerization of 3-fluoro-4′-(ω-vinyloxyalkoxy)-4-biphenylyl (2r,3s)-2-fluoro-3-methylpentanoate with undecanyl and octyl alkyl groups

The synthesis and “living” cationic polymerization of 3-fluoro-4′-(11-vinyloxyundecany-loxy)-4-biphenylyl (2R,3S)-2-fluoro-3-methylpentanoate ( 12-11 ) and 3-fluoro-4′-(8-vi-nyloxyoctyloxy)-4-biphenylyl (2R,3S)-2-fluoro-3-methylpentanoate ( 12-8 ) are presented. Poly ( 12-11 )s and poly ( 12-8 )s with degrees of polymerization from 4.0 to 16.5 and poly-dispersities ≤ 1.13 have been synthesized and characterized by differential scanning cal-orimetry (DSC) and thermal optical polarized microscopy. Over the entire range of molecular weights poly ( 12-11 )s and poly ( 12-8 )s exhibit an enantiotropic S_A and an unidentified S_X phase. In addition, regardless of its molecular weight, poly ( 12-8 ) exhibits a S^*_c phase in between the S_A and S_x phases. Poly ( 12-11 ) and poly ( 12-8 ) show lower transition tem-peratures and broader temperature ranges of all their mesophases as compared to the corresponding polymers without a fluorine atom on the biphenyl group. The role of the connecting group between the biphenyl and chiral group of the mesogenic unit on the phase behavior of these polymers is also discussed. Copolymers of 12-8 with (2R,3S)-2-fluoro-3-methylpentyl 4′-(11-vinyloxyundecanyloxy)biphenyl-4-carboxylate ( 13-11 ) {i.e., poly-[( 12-8 )-co-( 13-11 )] (X/Y), where X/Y represents the molar ratio of monomer 12-8 to monomer 13-11 } with DP of ca. 11 and polydispersities lower than 1.23 were also syn-thesized and characterized. Their S_A and S^*_c mesophases exhibit continuous dependences of composition and this support the assignment of the mesophases exhibited by poly ( 12-8 ). © 1995 John Wiley & Sons, Inc.     

Derivation of shell effects and magic numbers in metal clusters by the application of Strutinsky's method to the Clemenger–Nilsson and q‐deformed 3‐D harmonic oscillator models

Strutinsky's standard averaging method is applied to metal clusters described by two different potentials—Clemenger–Nilsson (CN) and q‐deformed 3‐D (Q3D) harmonic oscillator (HO). In addition, a new approximate fitting formula—of the liquid drop model type—is derived for the smooth part of the energy. The results obtained for the oscillating part of the energy (shell correction term) with the two cluster potentials through the two averaging methods are compared and discussed. It is found that with both CN and Q3D HO potentials the standard and approximate methods give similar results for clusters with a large number of particles, whereas for smaller clusters significant differences appear. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

Controllable Encapsulation of “Clean” Metal Clusters within MOFs through Kinetic Modulation: Towards Advanced Heterogeneous Nanocatalysts

Surfactant‐free tiny Pt clusters were successfully encapsulated within MOFs with controllable size and spatial distribution by a novel kinetically modulated one‐step strategy. Our synthesis relies on the rational manipulation of the reduction rate of Pt ions and/or the growth rate of MOFs by using H₂ as assistant reducing agent and/or acetic acid as MOF‐formation modulator. The as‐prepared Pt@MOF core–shell composites exhibited exceedingly high activity and excellent selectivity in the oxidation of alcohols as a result of the ultrafine “clean” Pt clusters, as well as interesting molecular‐sieving effects derived from the outer platinum‐free MOF shell.     

“Radical‐controlled” oxidative polymerization of phenol: Comparison with that of 4‐phenoxyphenol

“Radical‐controlled” oxidative polymerization of phenol (p‐1) by (1,4,7‐triisopropyl‐1,4,7‐triazacyclononane)copper(II) catalyst was performed and compared with that of 4‐phenoxyphenol (p‐2) in detail. Although the coupling selectivity for p‐1 seemed to be controlled by the catalyst, the C? C coupling, which was excluded completely for p‐2, occurred to some extent. The initial reaction rate of p‐1 was much smaller than that of p‐2, leading to the difference of polymerization behavior between p‐1 and p‐2. The rate‐determining step would be the coupling of controlled radicals species from the ESR measurement of the reaction mixture. The polymer resulting from p‐1 consisted mainly of phenylene oxide units, but had no crystallinity in contrast to the crystalline polymer from p‐2. However, the present polymer showed the highest thermal stability in the polymers obtained by oxidative polymerization of p‐1. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1955–1962, 2005     

Synthesis and thermal analysis of branched and “kinked” poly(ethylene terephthalate)

Poly(ethylene terephthalate) (PET) was synthesized by self-condensation of bis-(2-hydroxyethyl) terephthalate (BHET). Copolymerization of BHET with ethyl, bis-3,5-(2-hydroxyethoxy) benzoate (EBHEB) and ethyl, 3-(2-hydroxyethoxy) benzoate (E3HEB) yielded copolymers that contain varying amounts of branching and kinks, respectively. Copolymers of BHET with ethyl, 4-(2-hydroxyethoxy) benzoate (E4HEB), in which only the backbone symmetry is broken but without disruption of the linearity, were also prepared for comparison. The composition of the copolymers were established from their ¹H-NMR spectra. The intrinsic viscosity of all the copolymers indicated that they were of reasonably high molecular weights. The thermal analysis of the copolymers using DSC showed that both the melting temperatures (T_m) and the percent crystallinity (as seen from the enthalpies of melting) (ΔH_m) decreased with increasing comonomer (defect concentration) content, although their glass transition temperatures (T_g) were less affected. This effect was found to be most pronounced in the case of branching, while the effects of kinks and linear disruptions, on both T_m and ΔH_m, were found to be similar. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 309–317, 1998     

Reply to “Molecular mechanics models for the image charge”

We have considered the system investigated by Steinmann et al. by means of the image charge model originally proposed in Iori and Corni, J. Comput. Chem. 2008, 29, 1656. Qualitatively correct results are obtained, that compare favorably with the relevant analytical benchmarks. We show that the effect of the asymmetry of the rod model can be controlled, when needed, as originally suggested, that is, by shorter rods. This strategy does not increase neither the complexity of the model nor its computational cost. © 2017 Wiley Periodicals, Inc.     

Revisiting alternative pathways in the Fischer–Tropsch process: Accurate density functional theory calculations on “magic” Ru12 clusters

Models of the Fischer–Tropsch reaction typically focus on two proposed mechanisms for the initial carbon monoxide dissociation: unassisted dissociation (carbide mechanism), and hydrogen‐assisted dissociation via an adsorbed oxymethylidene (HCO*) intermediate. Much evidence for hydrogen‐assisted dissociation comes from density functional theory calculations modeling ruthenium nanoparticle catalysts as infinite, periodic metal slabs. However, the generalized gradient approximations (GGAs) used in these calculations can make significant errors in reaction barrier heights. How these errors affect the predicted selectivity to unassisted vs. hydrogen‐assisted dissociation is not well understood. We address the problem by considering a different regime, applying GGA and beyond‐GGA approximations to CO dissociation on a “magic” nonmagnetic Ru₁₂ cluster modeling supported nanoparticle catalysts. Both approximations concur that hydrogen‐assisted dissociation is facile on this cluster, providing additional support for its potential role in real catalysts.     

Kinetics of the “a” and “b” band emissions of mercury excimers with added gases

The kinetics of the “a” and “b” band emissions arising from the ¹Σ ← ³O_u and ¹Σ ← ³l_u transitions of the diatomic mercury molecule at λ_max ～ 4850 Å and 3350 Å, respectively, have been studied at low concentrations of mercury in the presence of N₂, C₂H₆, C₃H₈, and N₂O. Rate constant values have been obtained for the following reactions of the excimer molecule: Hg₂(³l_u) + N₂ → Hg₂(³O_u) + N₂ and Hg₂(³O_u) + RH → Hg₂(¹Σ) + RH, where RH = C₂H₆ or C₃H₈. From a consideration of the detailed kinetics of band emissions, it was also possible to derive rate constants for the quenching reactions of Hg(³P₀) atoms. These values are in reasonable agreement with those obtained previously from monitoring atom concentrations directly by 4047 Å absorbiometry.     

Production of PMMA Nanoparticles Loaded with Praziquantel Through “In Situ” Miniemulsion Polymerization

PZQ is the primary drug for treatment of schistosomiasis, but its efficiency is severely affected by its bitter taste. The main objective of this paper is the preparation of PMMA nanoparticles loaded with PZQ through in situ miniemulsion polymerizations and intended for oral formulations. Polymerizations are performed with an ultra turrax and a high‐pressure homogenizer. Obtained nanoparticles are analyzed by DSC, HPLC, DLS, GC, SEM, and PZQ dissolution profiles. Obtained results indicate the successful encapsulation of PZQ in all runs. Obtained data also show that the high‐pressure homogenizer leads to the best performance, allowing for preparation of stable latexes, with narrower particle size distributions and higher encapsulation efficiencies.

     

“Click & Seed” Approach to the Biomimetic Modification of Material Surfaces

A simple, versatile, protein‐repulsive, substrate‐independent biomimetic surface modification is presented that is based on the creation of a PEO brush on a polydopamine anchoring layer and its capacity for selective follow‐up modifications with various ligands using a copper‐catalyzed alkyne‐azide cycloaddition reaction. The desired surface concentration of peptide biomimetic ligands can be controlled by adjusting the peptide concentration in the reaction mixture, then measuring the activity of ¹²⁵I‐radiolabeled peptides that are immobilized on the substrates. The performance of the prepared substrates is tested in cell cultures with MEF cells and a human ECC line.