Error estimation in peak‐shape analysis of XPS core‐level spectra using UNIFIT 2003: how significant are the results of peak fits?

An error analysis for numerically evaluating random uncertainties in x‐ray photoelectron spectroscopy has been implemented in version 2003 of the spectra treatment and analysis software UNIFIT in order to improve the understanding of the statistical basis and the reliability of the model parameters for photoelectron spectra. The theoretical basis as well as two approaches to obtain error limits of the fit parameters have been considered. Several test spectra have been analysed and discussed. A representative example has been chosen to demonstrate the relevance of the error estimation for practical surface analysis. Suggestions for the minimization of errors in the peak‐fitting procedures are presented. Copyright © 2004 John Wiley & Sons, Ltd.     

First‐principles enthalpy landscape analysis of structural recovery in glasses

The enthalpy landscape is used to derive from first principles the departure functions that quantify structural recovery and aging in glassy materials. The departure functions are identical in form to the phenomenological Kovacs–Aklonis–Hutchinson–Ramos model departure functions, but with the important difference is that the relaxation times do not depend on the instantaneous structure (e.g., volume). This first‐principles derivation elucidates a number of experimental observations in glassy materials, including the asymmetry of approach, the effective relaxation‐rate paradox, and the different time dependences for volume and enthalpy recovery. Example results that qualitatively display these phenomena are obtained with a simple enthalpy landscape. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2302–2306, 2003     

Stability‐indicating validation of acitretin and isoacitretin in human plasma by LC‐ESI‐MS/MS bioanalytical method and its application to pharmacokinetic analysis

LC‐ ESI‐ MS/MS simultaneous bioanalytical method was developed to determine acitretin and its metabolite isoacitretin in human plasma using acitretin‐d3 used as the internal standard for both analytes. The compounds were extracted using protein precipitation coupled with liquid–liquid extraction with flash freezing technique. Negative mass transitions (m/z) of acitretin, isoacitretin and acitretin‐d3 were detected in multiple reactions monitoring (MRM) mode at 325.4 → 266.3, 325.2 → 266.1 and 328.3 → 266.3, respectively, with a turbo ion spray interface. The chromatographic separation was achieved on an Ascentis‐RP amide column (4.6 × 150 mm, 5 µm) with mobile phase delivered in isocratic mode. The method was validated over a concentration range of 1.025–753.217 ng/mL for acitretin and 0.394–289.234 ng/mL for isoacitretin with a limit of quantification of 1.025 and 0.394 ng/mL. The intra‐day and inter‐day precisions were below 8.1% for acitretin and below 13.8% for isoacitretin, while accuracy was within ±7.0 and ±10.6% respectively. For the first time, the best possible conditions for plasma stability of acitretin and isoacitretin are presented and discussed with application to clinical samples. Copyright © 2010 John Wiley & Sons, Ltd.     

Assessment of errors in the determination of Mark–Houwink–Sakurada and Stockmayer–Fixman constants using size‐exclusion chromatography with on‐line viscometric detection: Analyses of poly(p‐substituted styrenes) in tetrahydrofuran

In this work, we present values for the Mark–Houwink–Sakurada (MHS) and Stockmayer–Fixman (SF) constants for a series of homopolymers of para‐substituted styrenes (4‐X‐styrene; X = OCH₃, OCH₂CH₃, CH₃, F, Cl, and Br) in THF at room temperature. The respective values of K (in 10⁻⁵ dL/g) and α were: 0.685 and 13.2; 0.662 and 14.1; 0.740 and 8.41; 0.781 and 5.24; 0.726 and 8.95; 0.700 and 7.79. The respective values for K_θ (in 10⁻⁴ dL/g) and K' (in 10⁻⁷ dL/g) were: 6.01 and 16.1; 6.22 and 9.07; 7.64 and 17.4; 5.59 and 23.7; 6.29 and 17.3; 4.44 and 10.3. These constants were measured using size‐exclusion chromatography with on‐line viscometry. As part of this work, we investigate the applicability of common model fitting procedures to this method of measuring MHS/SF constants and the effect of uncertainties in their estimated values on the accuracy of molecular weight analysis. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2557–2570, 1999     

Blends of polycarbonate and poly(ϵ‐caprolactone) and the determination of the polymer–polymer interaction parameter of the two polymers

The thermal properties of blends of polycarbonate (PC) and poly(ε‐caprolactone) (PCL) were investigated by differential scanning calorimetry (DSC). From the thermal analysis of PC‐PCL blends, a single glass‐transition temperature (T_g) was observed for all the blend compositions. These results indicate that there is miscibility between the two components. From the modified Lu and Weiss equation, the polymer–polymer interaction parameter (χ₁₂) of the PC‐PCL blends was calculated and found to range from −0.012 to −0.040 with the compositions. The χ₁₂ values calculated from the T_g method decreased with the increase of PC weight fraction. By taking PC‐PCL blend as a model system, the values of χ₁₂ were compared with two different methods, the T_g method and melting point depression method. The two methods are in reasonably good agreement for the χ₁₂ values of the PC‐PCL blends. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2072–2076, 2000     

A multidimensional approach to the analysis of chemical shift titration experiments in the frame of a multiple reaction scheme

We present a method for fitting curves acquired by chemical shift titration experiments, in the frame of a three‐step complexation mechanism. To that end, we have implemented a fitting procedure, based on a nonlinear least squares fitting method, that determines the best fitting curve using a “coarse grid search” approach and provides distributions for the different parameters of the complexation model that are compatible with the experimental precision. The resulting analysis protocol is first described and validated on a theoretical data set. We show its ability to converge to the true parameter values of the simulated reaction scheme and to evaluate complexation constants together with multidimensional uncertainties. Then, we apply this protocol to the study of the supramolecular interactions, in aqueous solution, between a lanthanide complex and three different model molecules, using NMR titration experiments. We show that within the uncertainty that can be evaluated from the parameter distributions generated during our analysis, the affinities between the lanthanide derivative and each model molecule can be discriminated, and we propose values for the corresponding thermodynamic constants. Copyright © 2013 John Wiley & Sons, Ltd.     

Time‐dependent Fourier grid Hamiltonian method for studying the curve crossing dynamics: Dynamics of predissociation of NaI

A time‐dependent Fourier route is proposed to study quantum dynamics in the presence of curve crossing. The method is tested on a model problem and is then used to study the predissociation dynamics of NaI by a femtosecond laser pulse. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

Combined Wavelet Transform with Curve‐fitting for Objective Optimization of the Parameters in Fourier Self‐deconvolution

Fourier self‐deconvolution was the most effective technique in resolving overlapping bands, in which deconvolution function results in deconvolution and apodization smoothes the magnified noise. Yet, the choice of the original half‐width of each component and breaking point for truncation is often very subjective. In this paper, the method of combined wavelet transform with curve fitting was described with the advantages of an enhancement of signal to noise ratio as well as the improved fitting condition, and was applied to objective optimization of the original half‐widths of components in unresolved bands for Fourier self‐deconvolution. Again, a noise was separated from a noisy signal by wavelet transform, therefore, the breaking point of apodization function can be determined directly in frequency domain. Accordingly, some artifacts in Fourier self‐deconvolution were minimized significantly.     

Efficiency of the dry–wet method for the MALDI‐MSI analysis of latent fingermarks

Matrix‐assisted laser desorption/ionisation mass spectrometry imaging (MALDI‐MSI) has proven to be a powerful analytical tool to investigate problems in several fields of life science. A novel application is in the field of forensics, particularly in the analysis of latent fingermarks. This technology enables images of the fingermark ridge detail and additional intelligence to be simultaneously obtained. Although several methods are available to deposit the MALDI matrix, to make the technology forensically operational, another deposition approach was devised and reported, namely the ‘dry–wet’ method. In the present study, the efficiency of the dry–wet method was evaluated and compared with the conventional spray coat methodology. Results indicate that the dry–wet method is superior for all the donors' typologies in terms of ion signal intensity and clarity of the ridge details. To underpin the reasons of this efficiency, scanning electron microscopy analyses were carried out in parallel to MALDI‐MSI experiments using matrices of different particle size. Results have confirmed that the particle size plays an important role in the efficiency of the method as higher quality images and higher intensity spectra are produced as the matrix particle size decreases. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and polymerization of new di‐octadecyl ester derivatives of α‐hydroxymethyl acrylate: A structure‐property correlation for their copolymers with methyl methacrylate

New ether dimer (ED‐Od) and diester (ODE) derivatives of α‐hydroxymethylacrylate, each having two octadecyl side chains, were synthesized and (co)polymerized to evaluate the effects of differences in the structures of the monomers on final (co)polymer properties, particularly glass transition temperature. The free radical polymerizations of both monomers yielded high‐molecular weight polymers. Cyclopolymer formation of ED‐Od was confirmed by ¹³C NMR analysis and the cyclization efficiency (0.95 or greater) was found to be as high as the cyclization efficiencies of the cyclopolymerizations of ether dimers of various alkyl α‐hydroxymethylacrylates synthesized previously. Copolymers of both ED‐Od and ODE with methyl methacrylate (MMA) showed significant T_g decreases over PMMA due to octadecyl side groups causing “internal” plasticization. Comparison of the T_g's of the copolymers of octadecyl methacrylate, ED‐Od and ODE with MMA revealed that the impacts of these monomers on depression of T_g's are identical. That is, the magnitude of decrease in T_g's was quantitatively related to the number of the octadecyl side groups in the copolymers rather than their placement on the same or randomly incorporated repeat units. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7785–7793, 2008     

Monte‐Carlo simulation of spatial distribution of characteristic x‐rays in multi‐film targets: source size of Al Kα x‐rays in W/Al film targets

A Monte‐Carlo simulation approach has been applied to describe the spatial distribution of characteristic x‐rays in W/Al film targets of different combinations of film thicknesses for the optimal design of a small‐sized x‐ray source having a high x‐ray intensity. The result has led to optimal combinations of W and Al film targets for 100 kV electrons, e.g. W(1 µm)/Al(20 µm), W(3 µm)/Al(15 µm) and W(5 µm)/Al(8 µm). These Al/W targets could be used as x‐ray sources for a medical instrument currently under development. Copyright © 2004 John Wiley & Sons, Ltd.     

Monte‐Carlo simulation of spatial distribution of x‐rays in multi‐film targets. II: Spatial distribution of continuous x‐rays and temperature elevation in W/Al film targets

A Monte‐Carlo simulation written in C++ has been developed to describe spatial distributions of energy dissipation and x‐rays generated by penetrating kilovolt electrons in a multi‐film target. To evaluate the x‐ray source, especially its size and intensity, the use of brightness is proposed as a figure of merit. The Monte‐Carlo simulation approach was applied to a W (5 µm)/Al (200 µm) film target, which has been in practical use as an x‐ray source of small size with high emissivity. The result demonstrates that the experiment had considerable success. The optimum operating condition for the W (5 µm)/Al (200 µm) target in practical use has also been proposed by considering temperature elevation, spot size of electron beam, x‐ray source size and x‐ray intensity. Copyright © 2005 John Wiley & Sons, Ltd.     

Long‐range 19F–15N heteronuclear shift correlation: examination of J‐modulations associated with broad range accordion excitation

The first demonstrated example of ¹⁹F–¹⁵N long‐range heteronuclear shift correlation spectroscopy at natural abundance is reported. Because of the very large variation in the size of ²J(N,F) vs ³J(N,F) long‐range heteronuclear couplings, the utilization of one of the new accordion‐optimized long‐range heteronuclear shift correlations experiments is essential if all possible correlations are to be observed in a single experiment. A modified IMPEACH‐MBC pulse sequence was used in conjunction with an optimization range from 4 to 50 Hz to demonstrate the technique using a mixture of 2‐ and 3‐fluoropyridine, which had ²J(N,F) and ³J(N,F) long‐range couplings of ?52 and 3.6 Hz, respectively. Because of the size of the ²J(N,F) long‐range coupling constant, a J‐modulation of the long‐range correlation response is observed in the spectrum resulting in a ‘doublet’ in F₁ due to amplitude modulation. The size of the ‘doublet’ is shown to be a function of the parameter selection (t_1max,T_max,T_min and spectral width in F₁). This behavior is similar to F₁ ‘skew’ associated with long‐range correlation responses in ACCORD‐HMBC spectra which has been analyzed in detail previously. Copyright © 2002 John Wiley & Sons, Ltd.     

Variation of parameters in Becke‐3 hybrid exchange‐correlation functional

We have investigated the consequences of varying the three parameters in Becke's hybrid exchange‐correlation functional, which includes five contributions: Hartree–Fock exchange, local exchange, Becke's gradient exchange correction, local correlation, and some form of gradient correlation correction. Our primary focus was upon obtaining orbital energies with magnitudes that are reasonable approximations to the electronic ionization potentials; however, we also looked at the effects on molecular geometries and atomization enthalpies. A total of 12 parameter combinations was considered for each of three different gradient correlation corrections: the Lee–Yang–Parr, the Perdew‐86, and the Perdew–Wang 91. Five molecules were included in the study: HCN, N₂, N₂O, F₂O, and H₂O. For comparison, a Hartree–Fock calculation was also carried out for each of these. The 6‐31+G** basis set was used throughout this work. We found that the ionization potential estimates can be greatly improved (to much better than Hartree–Fock levels) by increasing the Hartree–Fock exchange contribution at the expense of local exchange. In itself, this also introduces major errors in the atomization enthalpies. However, this can be largely or even completely counteracted by reducing or eliminating the role of the gradient exchange correction. © 2000 John Wiley & Sons, Inc. J Comput Chem 21: 227–238, 2000     

Electrodeposition and Magnetic Characterization of Iron and Iron–Silicon Alloys from the Ionic Liquid 1‐Butyl‐1‐methylpyrrolidinium Trifluoromethylsulfonate

The electrodeposition of soft magnetic iron and iron–silicon alloys for magnetic measurements is presented. The preparation of these materials in 1‐butyl‐1‐methylpyrrolidinium trifluoromethylsulfonate, [Py_1,4]TfO, at 100 °C with FeCl₂ and FeCl₂+SiCl₄ was studied by using cyclic voltammetry. Constant‐potential electrolysis was carried out to deposit either Fe or FeSi, and deposits of approximately 10 μm thicknesses were obtained. By using scanning electron microscopy and X‐ray diffraction, the microstructure and crystallinity of the deposits were investigated. Grain sizes in the nanometer regime (50–80 nm) were found and the presence of iron–silicon alloys was verified. Frequency‐dependent magnetic polarizations, coercive forces, and power losses of some deposits were determined by using a digital hysteresis recorder. Corresponding to the small grain sizes, the coercive forces are around 950–1150 A m^?1 and the power losses were at 6000 J m^?3, which is much higher than in commercial Fe(3.2 wt %)Si electrical steel. Below a polarization of 1.8 T, the power losses are mainly caused by domain wall movements and, above 1.8 T, by rotation of magnetic moments as well as domain wall annihilation and recreation.     

Divergent Pathways and Competitive Mechanisms of Metathesis Reactions between 3‐Arylprop‐2‐ynyl Esters and Aldehydes: An Experimental and Theoretical Study

Mechanistic studies of the reaction between 3‐arylprop‐2‐ynyl esters and aldehydes catalyzed by BF₃ ? Et₂O were performed by isotopic labeling experiments and quantum chemical calculations. The reactions are shown to proceed by either a classical alkyne–carbonyl metathesis route or an unprecedented addition–rearrangement cascade. Depending on the structure of the starting materials and the reaction conditions, the products of these reactions can be Morita–Baylis–Hillman (MBH) adducts that are unavailable by traditional MBH reactions or E‐ and Z‐α,β‐unsaturated ketones. ¹⁸O‐Labeling studies suggested the existence of two different reaction pathways to the products. These pathways were further examined by quantum chemical calculations that employed the DFT(wB97XD)/6‐311+G(2d,p) method, together with the conductor‐like screening model for realistic solvation (COSMO‐RS). By using the wB97XD functional, the accuracy of the computed data is estimated to be 1–2 kcal mol^?1, shown by the careful benchmarking of various DFT functionals against coupled cluster calculations at the CCSD(T)/aug‐cc‐pVTZ level of theory. Indeed, most of the experimental data were reproduced and explained by theory and it was convincingly shown that the branching point between the two distinct mechanisms is the formation of the first intermediate on the reaction pathway: either the four‐membered oxete or the six‐membered zwitterion. The deep mechanistic understanding of these reactions opens new synthetic avenues to chemically and biologically important α,β‐unsaturated ketones.     

An improved generator coordinate Hartree–Fock method applied to the choice of contracted Gaussian basis sets for first‐row diatomic molecules

Accurate Gaussian basis sets (18s for Li and Be and 20s11p for the atoms from B to Ne) for the first‐row atoms, generated with an improved generator coordinate Hartree–Fock method, were contracted and enriched with polarization functions. These basis sets were tested for B₂, C₂, BeO, CN⁻, LiF, N₂, CO, BF, NO⁺, O₂, and F₂. At the Hartree–Fock (HP), second‐order Møller–Plesset (MP2), fourth‐order Møller–Plesset (MP4), and density functional theory (DFT) levels, the dipole moments, bond lengths, and harmonic vibrational frequencies were studied, and at the MP2, MP4, and DFT levels, the dissociation energies were evaluated and compared with the corresponding experimental values and with values obtained using other contracted Gaussian basis sets and numerical HF calculations. For all diatomic molecules studied, the differences between our total energies, obtained with the largest contracted basis set [6s5p3d1f], and those calculated with the numerical HF methods were always less than 3.2 mhartree. © 2000 John Wiley & Sons, Inc. Int J Quant Chem 78: 15–23, 2000