Trithallium hydrogen bis(sulfate), Tl3H(SO4)2, in the super‐ionic phase by X‐ray powder diffraction

The structure of trithallium hydrogen bis­(sulfate), Tl₃H(SO₄)₂, in the super‐ionic phase has been analyzed by Rietveld analysis of the X‐ray powder diffraction pattern. Atomic parameters based on the isotypic Rb₃H(SeO₄)₂ crystal in space group Rm in the super‐ionic phase were used as the starting model, because it has been shown from the comparison of thermal and electric properties in Tl₃H(SO₄)₂ and M₃H(SO₄)₂ type crystals (M = Rb, Cs or NH₄) that the room‐temperature Tl₃H(SO₄)₂ phase is isostructural with the high‐temperature Rm‐symmetry M₃H(SO₄)₂ crystals. The structure was determined in the trigonal space group Rm and the Rietveld refinement shows that an hydrogen‐bond O—­H?O separation is slightly shortened compared with O—H?O separations in isotypic M₃H(SeO₄)₂ crystals. In addition, it was found that the distortion of the SO₄ tetrahedra in Tl₃H(SO₄)₂ is less than that in isotypic crystals.     

Fluoro‐ and Perfluoralkylsulfonylpentafluoroanilides: Synthesis and Characterization of NH Acids for Weakly Coordinating Anions and Their Gas‐Phase and Solution Acidities

Fluoro‐ and perfluoralkylsulfonyl pentafluoroanilides [HN(C₆F₅)(SO₂X); X=F, CF₃, C₄F₉, C₈F₁₇] are a class of imides with two different strongly electron‐withdrawing substituents attached to a nitrogen atom. They are NH acids, the unsymmetrical hybrids of the well‐known symmetrical bissulfonylimides and bispentafluorophenylamine. The syntheses, the structures of these perfluoroanilides, their solvates, and some selected lithium salts give rise to a structural variety beyond the symmetrical parent compounds. The acidities of representative subsets of these novel NH acids have been investigated experimentally and quantum‐chemically and their gas‐phase acidities (GAs) are reported, as well as the pK_a values of these compounds in acetonitrile (MeCN) and DMSO solution. In quantum chemical investigations with the vertical and relaxed COSMO cluster‐continuum models (vCCC/rCCC), the unusual situation is encountered that the DMSO‐solvated acid Me₂SO–H‐N(SO₂CF₃)₂, optimized in the gas phase (vCCC model), dissociates to Me₂SO‐H⁺–N(SO₂CF₃)₂^? during structural relaxation and full optimization with the solvation model turned on (rCCC model). This proton transfer underlines the extremely high acidity of HN(SO₂CF₃)₂. The importance of this effect is studied computationally in DMSO and MeCN solution. Usually this effect is less pronounced in MeCN and is of higher importance in the more basic solvent DMSO. Nevertheless, the neglect of the structural relaxation upon solvation causes typical changes in the computational pK_a values of 1 to 4 orders of magnitude (4–20 kJ mol^?1). The results provide evidence that the published experimental DMSO pK_a value of HN(SO₂CF₃)₂ should rather be interpreted as the pK_a of a Me₂SO‐H⁺–N(SO₂CF₃)₂^? contact ion pair.     

Syntheses,Crystal Structures,and Photocatalytic Activities of Three Copper Coordination Polymers Based on Bis(1H‐imidazol‐4‐yl)benzene/3‐(2‐Pyridyl)pyrazole

Three copper(II) coordination polymers (CuCPs), namely, [Cu_0.5(1,4‐bib)(SO₄)_0.5]_n ( 1 ), {[Cu(1,3‐bib)₂(H₂O)] · SO₄ · H₂O}_n ( 2 ), and [Cu(bpz)(SO₄)_0.5]_n ( 3 ), were assembled from the reaction of three N‐donors [1,4‐bib = 1,4‐bis(1H‐imidazol‐4‐yl)benzene, 1,3‐bib = 1,3‐bis(1H‐imidazol‐4‐yl)benzene, and Hbpz = 3‐(2‐pyridyl)pyrazole] with copper sulfate under hydrothermal conditions. Their structures were determined by single‐crystal X‐ray diffraction analyses and further characterized by elemental analyses (EA), IR spectroscopy, powder X‐ray diffraction (PXRD), and thermogravimetric analyses (TGA). Structure analyses reveal that complex 1 is a 3D 6‐connected {4¹² · 6³}‐ pcu net, complex 2 is a fourfold 3D 4‐connected 6⁶‐ dia net, whereas complex 3 is a 1D snake‐like chain, which further expanded into 3D supramolecular architectures with the help of C–H ··· O hydrogen bonds. Moreover, the photocatalytic tests demonstrate that the obtained CuCPs are photocatalysts in the degradation of MB with the efficiency is 86.4 % for 1 , 75.3 % for 2 , and 91.3 % for 3 after 2 h, respectively.     

Deuteration-induced structural phase transition versus quantum paraelectric behavior: Quantum chemical modeling of H/D bonded materials

On the examples of the K₃(H/D)(SO₄)₂ family (I), the derivatives of 9-hydroxyphenalenone (II) and chromous acids α-(H/D)CrO₂ (III) the problem of the deuteration-induced structural phase transition (SPT) is considered using pseudospin dynamic Ising model formalism. The pseudospin Hamiltonian parameters – tunneling integrals Ω(H/D) and Ising model coupling parameters J_ij(H/D) along with molecular field parameters J₀(H/D) have been evaluated on the base of quantum chemical models and various computational techniques. The crystal-chemistry factors that influence on the values of these parameters are discussed. For I and II solids zero-dimensional character of the H-bond network is believed to be the main reason of the deuteration-induced SPT, although the pronounced geometrical (H/D) isotope effect (0.04 Å) also may play a noticeable role for I. Meanwhile for III such SPT is due to the giant (0.1 Å) geometrical (H/D) isotope effect.     

Synthesis of 4-(4-Methylsulfonylphenyl)-3-phenyl-2(3H)-thiazole Thione Derivatives as New Potential COX-2 Inhibitors

Synthesis of novel 4-（4-methylsulfonylphenyl）-3-phenyl-2（3H）-thiazole thione derivatives with functionalized diarylheterocycle pharmacophore as potential COX-2 inhibitors was described. The title compounds were synthesized by cyclocondensation of corresponding dithiocarbamate and 2-bromo-1-（4-methylsulfonylphenyl）ethanone, followed by dehydration with H2SO4. All of the target compounds were characterized by ^1H NMR, IR and mass spectral data.     

A three‐dimensional polymeric potassium complex of 5‐sulfonobenzene‐1,2,4‐tricarboxylic acid: poly[μ‐aqua‐aqua‐μ9‐(2,4‐dicarboxy‐5‐sulfonatobenzoato)‐dipotassium(I)]

The asymmetric unit in the structure of the title compound, [K₂(C₉H₄O₉S)(H₂O)₂]_n, consists of two eight‐coordinated K^I cations, one 2,4‐dicarboxy‐5‐sulfonatobenzoate dianion (H₂SBTC²⁻), one bridging water molecule and one terminal coordinated water molecule. One K^I cation is coordinated by three carboxylate O atoms and three sulfonate O atoms from four H₂SBTC²⁻ ligands and by two bridging water molecules. The second K^I cation is coordinated by four sulfonate O atoms and three carboxylate O atoms from five H₂SBTC²⁻ ligands and by one terminal coordinated water molecule. The K^I cations are linked by sulfonate groups to give a one‐dimensional inorganic chain with cage‐like K₄(SO₃)₂ repeat units. These one‐dimensional chains are bridged by one of the carboxylic acid groups of the H₂SBTC²⁻ ligand to form a two‐dimensional layer, and these layers are further linked by the remaining carboxylate groups and the benzene rings of the H₂SBTC²⁻ ligands to generate a three‐dimensional framework. The compound displays a photoluminescent emission at 460 nm upon excitation at 358 nm. In addition, the thermal stability of the title compound has been studied.     

Application of a biological‐based nanomagnetic catalyst in the synthesis of bis‐pyrazols and pyrano[3,2‐c]pyrazoles

{Fe₃O₄@SiO₂@(CH₂)₃‐thiourea dioxide‐SO₃H/HCl}, a newly reported nanomagnetic core–shell supported solid acid catalyst, was successfully employed in the preparation of 4,4′‐(arylmethylene)bis(1H –pyrazol‐5‐ol) and pyrano[3,2‐c ]pyrazole derivatives. The presented methods are very efficient and high‐yielding. Also, the catalyst exhibited powerful potential for reusability in both types of reactions.     

Synthesis of the first nanomagnetic particles with semicarbazide‐based acidic ionic liquid tag: an efficient catalyst for the synthesis of 3,3′‐(arylmethylene)bis(4‐hydroxycoumarin) and 1‐carbamato‐alkyl‐2‐naphthol derivatives under mild and green conditions

Semicarbazide functionalized with chlorosulfonic acid on the surface of silica‐coated magnetic nanoparticles, {Fe₃O₄@SiO₂@(CH₂)₃Semicarbazide‐SO₃H/HCl}, as a novel magnetic Brønsted acid catalyst according to the aims of green chemistry was synthesized and fully characterized using Fourier transform infrared, UV–visible and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, scanning electron, transmission electron and atomic force microscopies and thermogravimetric analysis. The capability and excellent activity of this nanoparticle catalyst were exhibited in the synthesis of two series of compounds with important biological activities, namely 3,3′‐(arylmethylene)bis(4‐hydroxycoumarin) and 1‐carbamato‐alkyl‐2‐naphthol derivatives, under mild, green and solvent‐free conditions. To the best of our knowledge, this is the first study of the synthesis and application of {Fe₃O₄@SiO₂@(CH₂)₃Semicarbazide‐SO₃H/HCl} as Brønsted acid solid magnetic nanoparticles. Consequently the present study can open up a novel and promising intuition in the sequence of logical design, synthesis and applications of task‐specific Brønsted acid magnetic nanoparticle catalyst with favourable properties as a full‐fledged efficient material for sustainable approaches. Copyright © 2016 John Wiley & Sons, Ltd.     

KAl(SO4)2·12H2O (Alum) Catalyzed One‐Pot Three‐Component Synthesis of 2‐Alkyl and 2‐Aryl‐4(3H)‐quinazolinone under Microwave Irradiation and Solvent Free Conditions

Twenty 2,3‐disubstituted‐4(3H)‐quinazolinones were synthesed by one‐pot three‐component method with isatoic anhydride, orthoesters and amines as raw materials in the presence of KAl(SO₄)₂·12H₂O (Alum) under microwave irradiation and solvent‐free conditions. 6‐Bromo‐2‐propyl‐3‐p‐tolylquinazolin‐4(3H)‐one ( 4m ), 6‐bromo‐2‐methyl‐3‐phenethylquinazolin‐4(3H)‐one ( 4n ) and 6‐bromo‐2‐ethyl‐3‐phenethylquinazolin‐4(3H)‐one ( 4o ) were characterized by IR, ¹H NMR, ¹³C NMR and elemental analysis.     

Amine‐Templated One‐Dimensional Metal Sulfates Including a Mixed‐Valent Fe Compound with a Half‐Kagome Structure

Organically templated metal sulfates are relatively new. Six amine‐templated transition‐metal sulfates with different types of chain structures, including a novel iron sulfate with a chain structure corresponding to one half of the kagome structure, were synthesized by hydro/solvothermal methods. Amongst the one‐dimensional metal sulfates, [C₁₀N₂H₁₀][Zn(SO₄)Cl₂] ( 1 ) is the simplest, being formed by corner‐linked ZnO₂Cl₂ and SO₄ tetrahedra. [C₆N₂H₁₈][Mn(SO₄)₂(H₂O)₂] ( 2 ) and [C₂N₂H₁₀][Ni(SO₄)₂(H₂O)₂] ( 3 ) have ladder structures comprising four‐membered rings formed by SO₄ tetrahedra and metal–oxygen octahedra, just as in the mineral kröhnkite. [C₄N₂H₁₂][V^III(OH)(SO₄)₂]?H₂O ( 4 ) and [C₄N₂H₁₂][VF₃(SO₄)] ( 5 ) exhibit chain topologies of the minerals tancoite and butlerite, respectively. The structure of [C₄N₂H₁₂][H₃O][Fe^IIIFe^II F₆(SO₄)] ( 6 ) is noteworthy in that it corresponds to half of the hexagonal kagome structure. It exhibits ferrimagnetic properties at low temperatures and the absence of frustration, unlike the mixed‐valent iron sulfate with the full kagome structure.     

Pinacol Rearrangement of 3,4‐Dihydro‐3,4‐dihydroxyquinolin‐2(1H)‐ones: An Alternative Pathway to Viridicatin Alkaloids and Their Analogs

3‐Alkyl/aryl‐3‐hydroxyquinoline‐2,4‐diones were reduced with NaBH₄ to give cis‐3‐alkyl/aryl‐3,4‐dihydro‐3,4‐dihydroxyquinolin‐2(1H)‐ones. These compounds were subjected to pinacol rearrangement by treatment with concentrated H₂SO₄, resulting in 4‐alkyl/aryl‐3‐hydroxyquinolin‐2(1H)‐ones. When a benzyl (Bn) group was present in position 3 of the starting compound, its elimination occurred during the rearrangement, and the corresponding 3‐hydroxyquinolin‐2(1H)‐one was formed. The reaction mechanisms are discussed for all transformations. All compounds were characterized by IR, ¹H‐ and ¹³C‐NMR spectroscopy, as well as mass spectrometry.     

Template‐Free Synthesis of Highly b‐Oriented MFI‐Type Zeolite Thin Films by Seeded Secondary Growth

Highly b‐oriented, closely packed, MFI zeolite films are prepared on seeded stainless‐steel plates using organic template‐free, secondary growth solutions, containing aluminum sulfate as a crystallization agent. The number of a‐oriented twin crystals is significantly reduced, and even eliminated, simply by restricting the pH value of the secondary growth solution to the narrow range of 11.1–11.3. Values of pH can be adjusted through the controlled addition of (NH₄)₂SO₄ or H₂SO₄ to secondary growth solutions of the composition (1 SiO₂:0.57 NaOH:137.5 H₂O:0.0050 (Al₂(SO₄)₃?18 H₂O)) or by simply decreasing the molar composition of NaOH with no extra additives.     

Hydrogen Bonding Network of 4‐Amidiniumpyridine Acetate and PtIIbis(triphenylphosphine) Complexes with 4‐Amidine­pyridine

The X‐ray structures of 4‐amidiniumpyridine acetate, ( 1· H)AcO, and of cis‐[Pt( 1 )₂(PPh₃)₂](NO₃)₂ ( 2 ), as well as their IR spectra, reveal intramolecular hydrogen bonding, which held together the cations and the anions. The IR spectroscopic data suggest that this may be so also in cis‐[PtCl( 1 )(PPh₃)₂](BF₄) ( 3 ). In ( 1· H)AcO and in 2 extensive intermolecular hydrogen bonding networks span through the whole crystals.     

Tris[3‐hydroxy‐2(1 H)‐pyridinonato]‐Komplexe von Al3+, Cr3+ und Fe3+ – Kristall‐ und Molekülstrukturen von 3‐Hydroxy‐2(1 H)‐pyridinon und Tris[3‐hydroxy‐2(1 H)‐pyridinonato]chrom(III)

Tris[3‐hydroxy‐2(1 H)‐pyridinonato] Complexes of Al³⁺, Cr³⁺, and Fe³⁺ – Crystal and Molecular Structures of 3‐Hydroxy‐2(1 H)‐pyridinone and Tris[3‐hydroxy‐2(1 H)‐pyridinonato]chromium(III) Tris[3‐hydroxy‐2(1 H)‐pyridinonato] complexes of Al³⁺, Cr³⁺ and Fe³⁺ are obtained by reactions of 3‐hydroxy‐2(1 H)pyridinone with the hydrates of AlCl₃, CrCl₃ or Fe(NO₃) in aqueous alkaline solutions as polycrystalline precipitates. The compounds are isotypic. X‐ray structure determinations were performed on single crystals of the uncoordinated 3‐hydroxy‐2(1 H)‐pyridinone ( 1 ) (orthorhombic, space group P2₁2₁2₁, a = 405.4(1), b = 683.0(1), c = 1770.3(3) pm, Z = 4) and of the chromium compound 3 (rhombohedral with hexagonal setting, space group R3c, a = 978.1(1), c = 2954.0(1) pm, Z = 6).     

How the oxazole fragment influences the conformation of the tetraoxazocane ring in a cyclohexanespiro‐3′‐(1,2,4,5,7‐tetraoxazocane): single‐crystal X‐ray and theoretical study

Single crystals of (2S,5R)‐2‐isopropyl‐5‐methyl‐7‐(5‐methylisoxazol‐3‐yl)cyclohexanespiro‐3′‐(1,2,4,5,7‐tetraoxazocane), C₁₆H₂₆N₂O₅, have been studied via X‐ray diffraction. The tetraoxazocane ring adopts a boat–chair conformation in the crystalline state, which is due to intramolecular interactions. Conformational analysis of the tetraoxazocane fragment performed at the B3LYP/6‐31G(d,2p) level of theory showed that there are three minima on the potential energy surface, one of which corresponds to the conformation realized in the solid state, but not to a global minimum. Analysis of the geometry and the topological parameters of the electron density at the (3,?1) bond critical points (BCPs), and the charge transfer in the tetraoxazocane ring indicated that there are stereoelectronic effects in the O—C—O and N—C—O fragments. There is a two‐cross hyperconjugation in the N—C—O fragment between the lone electron pair of the N atom (lpN) and the antibonding orbital of a C—O bond (σ*_C—O) and vice versa between lpO and σ*_C—N. The oxazole substituent has a considerable effect on the geometry and the topological parameters of the electron density at the (3,?1) BCPs of the tetraoxazocane ring. The crystal structure is stabilized via intermolecular C—H…N and C—H…O hydrogen bonds, which is unambiguously confirmed with PIXEL calculations, a quantum theory of atoms in molecules (QTAIM) topological analysis of the electron density at the (3,?1) BCPs and a Hirshfeld analysis of the electrostatic potential. The molecules form zigzag chains in the crystal due to intermolecular C—H…N interactions being electrostatic in origin. The molecules are further stacked due to C—H…O hydrogen bonds. The dispersion component in the total stabilization energy of the crystal lattice is 68.09%.     

Microwave‐Assisted Three‐Component Synthesis of Some Novel 1‐Alkyl‐1H‐indole‐2,3‐dione 3‐(O‐Alkyl­oxime) Derivatives as Potential Chemotherapeutic Agents

A convenient and efficient method for a one‐pot conversion of N‐alkylisatins to N‐alkylisatin O‐alkyloximes 7a – 7n as potential chemotherapeutic agents is described (Scheme) (isatin=1H‐indole‐2,3‐dione). In this method, the microwave‐assisted three‐component reaction of N‐alkylisatins 8 , hydroxylamine hydrochloride, and diverse alkyl halides in the presence of K₂CO₃ and Bu₄NBr furnishes the corresponding N‐alkylisatin O‐alkyloximes under solvent‐free condition in short times (2–10 min) and good to excellent yields (62–83%). The O‐alkylation of in situ generated isatin oximes with alkyl halides was achieved regioselectively, and (Z)‐O‐alkyloximes were produced dominantly. PM3 Semi‐empirical quantum‐mechanic calculations were performed to rationalize the evidences, and the calculations indicated a lower heat of formation for the (Z)‐O‐alkyloximes.     

Stabilization of Substituted Triazenide Oxides: Synthesis and X‐ray Structural Features of Polymeric Potassium 3‐(4‐carboxylatophenyl)‐1‐methyltriazene N‐oxide‐hydrate, {K[O2C‐C6H4‐N(H)NN(CH3)O]·4H2O}n

3‐(4‐carboxyphenyl)‐1‐methyltriazene N‐oxide reacts with KOH in methanol/pyridine to give {K[O₂C‐C₆H₄‐N(H)NN(CH₃)O]·4H₂O}_n, Potassium‐3‐(4‐carboxylatophenyl)‐1‐methyltriazene N‐oxide). The terminal carboxylato group of the anion does not interact with the cation. In the crystal lattice of {K(C₈H₈N₃O₃)·4H₂O}_n each three of the four water molecules interact with two potassium cations, every K⁺ ion being the centre of six bridging K···O interactions. Potassium cations interact further with the terminal N‐oxigen atom of single [C₈H₈N₃O₃]^? anions achieving two parallel {C₈H₈N₃O₃^?K⁺}_n chains, which are linked through water molecules. The resulting polymeric, one‐dimensional chain, is operated by a screw axis 2₁ parallel to the crystallographic direction [010], along and equidistant to the K⁺ centres. The coordination of the K⁺ centres involves a distortion of the boat conformation of elementary sulfur (S₈) with the ideal C_2v symmetry.     

Jahn‐Teller‐Ordnung in Mangan(III)‐fluoridsulfaten. II. Phasenübergang und Verzwillingung bei K2[MnF3(SO4)] und 1D Magnetismus in Verbindungen A2[MnF3(SO4)] (A = K,NH4, Rb,Cs)

Jahn‐Teller Ordering in Manganese(III) Fluoride Sulfates. II. Phase Transition and Twinning of K₂[MnF₃(SO₄)] and 1D Magnetism in Compounds A₂[MnF₃(SO₄)] (A = K, NH₄, Rb, Cs) According to single‐crystal X‐ray investigations, K₂[MnF₃(SO₄)] crystallizes at low temperature, like the isostructural Rb, NH₄, and Cs analogues in space group P2₁/c, Z = 4, e.g. at 100 K with a = 7.197, b = 10.704, c = 8.427Å, β = 91.84°. Below about 300 K, the crystals are found to be [001] axis twins. Using a new integration method for area detector records, nearly complete intensity data could be gained allowing for structure refinements of similar quality as for untwinned crystals (e.g. at 100 K: wR₂ = 0.050, R = 0.020 for all reflections). With rising temperature, the monoclinic angle approaches continuously 90°. For an ordering parameter Δβ = β?90° a 2^nd‐order phase transition is observed with an exponent λ = 0.17. At the transition temperature of 280 K resulting from the fit, the monoclinic structure changes – with delay – to orthorhombic with the minimum super‐group Pnca, a = 7.243, b = 10.763, c = 8.457Å, R = 0.024, as found in an early structure determination at room temperature by Edwards 1971. In the chain‐like [MnF₃(SO₄)]^2? anions, manganese(III) is octahedrally coordinated by two trans‐terminal and two trans‐bridging fluorine ligands as well as by the O atoms of two trans‐bridging sulfate ligands. At low temperature, the octahedral elongation by the Jahn‐Teller effect alternates between a F–Mn–F and an O–Mn–O axis (antiferrodistortive ordering). All bridges are asymmetric. From about 320 K on they become symmetric. Due to 2D dynamical Jahn‐Teller effect all octahedra appear compressed. All compounds A₂[MnF₃(SO₄)] show 1D antiferromagnetism. The antiferrodistortive Jahn‐Teller order at low temperatures and the small bridge angles explain the much lower magnetic exchange energies and their inverse relation to the bridge angles as compared with other fluoromanganate(III) chain compounds with the usual ferrodistortive ordering.     

Magnetic Graphene Oxide Anchored Sulfonic Acid as a Novel Nanocatalyst for the Synthesis of N‐aryl‐2‐amino‐1,6‐naphthyridines

Magnetic graphene oxide functionalized with sulfonic acid (Fe₃O₄‐GO‐SO₃H) was used as a new recyclable nanocatalyst for one‐pot synthesis of N‐aryl‐2‐amino‐1,6‐naphthyridine derivatives under solvent free conditions. The catalyst could be easily recovered from the reaction mixture by an external magnet and reused without significant decrease in activity even after 4 runs. This nanocatalyst exhibited better activities to other commercially available sulfonic acid catalysts.