Oxidative copolymerization of indene with p‐tert‐butylstyrene: Synthesis,characterization, thermal analysis,and reactivity ratios

Copolyperoxides of indene and p‐tert‐butylstyrene of different compositions were synthesized by free‐radical‐initiated oxidative copolymerization. The compositions of the copolyperoxides, obtained from ¹H and ¹³C NMR spectra, were used to calculate the reactivity ratios of the monomers. The reactivity ratios indicated a larger proportion of indene units in random placement in the copolyperoxides. Thermal‐degradation studies by differential scanning calorimetry and electron‐impact mass spectrometry supported alternating peroxide units in the copolymer backbone. The activation energy for thermal degradation suggested that the degradation was dependent on the dissociation of the peroxide (? O? O? ) bonds in the backbone of the copolyperoxide chain. The flexibility of the copolyperoxides was examined in terms of the glass‐transition temperature. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 9–18, 2002     

Reactivity ratios for the terpolymerization of methyl methacrylate,vinyl acetate,and molecular oxygen

The copolymerization of methyl methacrylate (MMA) and vinyl acetate (VAc) under high oxygen pressure was investigated. Copolyperoxides of various compositions were synthesized by the free‐radical‐initiated oxidative copolymerization of MMA and VAc monomers. The copolyperoxide compositions obtained from ¹H and ¹³C NMR spectra were used for determining the reactivity ratios of the monomers. The reactivity ratios indicated a larger proportion of MMA units statistically placed in the copolyperoxides. A theoretical analysis based on semiempirical AM1 calculations was performed to support the reactivity ratios. NMR studies showed irregularities in the copolyperoxide chain due to the cleavage reactions of the propagating peroxide radical. Thermal analyses of the copolyperoxides by differential scanning calorimetry gave evidence for the presence of alternating peroxide units in the copolyperoxide chain. The activation energies of thermal degradation suggested that degradation was controlled by the dissociation of the peroxide (? O? O? ) bond in the backbone of the copolyperoxide chain. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 564–572, 2002; DOI 10.1002/pola.10115     

Reactivity ratios for the oxidative copolymerizations of indene with methyl methacrylate and methacrylonitrile

The copolyperoxides of indene with methyl methacrylate and methacrylonitrile have been synthesized by the free-radical-initiated oxidative copolymerization of indene and the monomers. The compositions of copolyperoxides, obtained from 1H and 13C NMR spectra, have been utilized to determine the reactivity ratios. The reactivity ratios indicate that the copolyperoxides contain a large proportion of the indene units in random placement. Thermal degradation studies of the copolyperoxides by differential scanning calorimetry and electron-impact mass spectroscopy support alternating peroxide units in the copolyperoxide chain. The energy of activation for thermal degradation suggests that the degradation is controlled by the dissociation of the peroxide (-O-O-) bonds in the copolyperoxide chain. The flexibility of copolyperoxide in terms of glass transition temperature (T_g) has also been examined.     

Cyclopolymerization of α,ω‐heterodifunctional monomers containing styrene and maleimide moieties

A series of α,ω‐heterodifunctional monomers with styrene (St) and maleimide moieties bridged by a varied length of oligo‐ethylene glycol (OEG) linkers were synthesized. Cyclopolymerizations of these monomers through reversible addition–fragmentation chain transfer‐mediated alternating radical copolymerization between intramolecular St and maleimide moieties were investigated. For the monomers with three or more ethylene glycol (EG) units, their cyclopolymerizations can be realized properly in low monomer feeding concentrations, affording well‐defined cyclopolymers with crown ether encircled in their main chains. Importantly, the cyclopolymerizations of monomers with six or seven EG units in the presence of KPF₆ could be enhanced by the supramolecular effects between the OEG linkers and the potassium metal ion. Thus, the monomer feeding concentration could be largely improved, which may benefit preparation of the cyclopolymers with high degrees of copolymerization. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 330–338     

RAFT polymerization of alternating styrene‐pentafluorostyrene copolymers

Reversible addition‐fragmentation chain‐transfer (RAFT) polymerization was used to control the alternating copolymerization of styrene and 2,3,4,5,6‐pentaflurostyrene. The RAFT polymerization yields a high degree of control over the molecular weight of the polymers and does not significantly influence the reactivity ratios of the monomers. The controlled free‐radical polymerization could be initiated using AIBN at elevated temperatures or using a redox couple (benzoyl peroxide/N,N‐dimethylaniline) at room temperature, while maintaining control over molecular weight and dispersity. The influence of temperature and solvent on the molecular weight distribution and reactivity ratios were investigated. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1555–1559     

Free‐radical copolymerization of ethyl α‐hydroxymethylacrylate with methyl methacrylate by reversible addition–fragmentation chain transfer

The controlled free‐radical homopolymerization of ethyl α‐hydroxymethylacrylate and copolymerization with methyl methacrylate were performed in chlorobenzene at 70 °C by the reversible addition–fragmentation chain transfer polymerization technique with 2,2′‐azobisisobutyronitrile as the initiator. 2‐Phenylprop‐2‐yl dithiobenzoate and 2‐cyanoprop‐2‐yl dithiobenzoate were used as chain‐transfer agents in the homopolymerization, whereas only the former was used in the copolymerization. All reactions presented pseudolinear kinetics. The effect of the monomer feed ratio on the copolymerization kinetics was examined. The conversion level decreased when the proportion of ethyl α‐hydroxymethylacrylate in the monomer feed was larger. Kinetic studies indicated that the radical polymerizations proceeded with apparent living character according to experiments, demonstrating an increase in the molar mass with the monomer conversion and a relatively narrow molar mass distribution. All copolymers were statistical in chain structure, as confirmed by determinations of the monomer reactivity ratios. The monomer reactivity ratios were determined, and the Mayo–Lewis terminal model provided excellent predictions for the variations of the intermolecular structure over the entire conversion range. Additionally, the chemical modification of poly(ethyl α‐hydroxymethylacrylate) was carried out to introduce glucose pendant groups into the structure. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5618–5629, 2006     

Efficient terpolymerization of ethylene and styrene with α‐olefins by aryloxo‐modified half‐titanocene‐based catalysts and cocatalyst systems

Aryloxo‐modified half‐titanocenes, Cp′TiCl₂(O‐2,6‐ⁱPr₂C₆H₃) [Cp′ = Cp* ( 1 ), ^tBuC₅H₄ ( 2 )], catalyze terpolymerization of ethylene and styrene with α‐olefin (1‐hexene and 1‐decene) efficiently in the presence of cocatalyst, affording high‐molecular‐weight polymers with unimodal distributions (compositions). Efficient comonomer incorporations have been achieved by these catalysts. The content of each comonomer (α‐olefin, styrene, etc.) could be controlled by varying the comonomer concentration charged, and resonances ascribed to styrene and α‐olefin repeated insertion were negligible. The terpolymerization with p‐methylstyrene (p‐MS) in place of styrene also proceeded in the presence of [PhN(H)Me₂][B(C₆F₅)₄] and AlⁱBu₃ cocatalyst, and p‐MS was incorporated in an efficient matter, affording high‐molecular‐weight polymers with uniform molecular weight distributions. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2565–2574     

Synthesis and characterization of thiophene‐substituted N‐phenyl maleimide polymers by photoinduced radical polymerization

Two types of novel functionalized N‐[4‐(4′‐hydroxyphenyloxycarbonyl)phenyl]maleimide and N‐(4‐{[2‐(3‐thienyl)acetyl]oxyphenyl}oxycarbonylphenyl)maleimide (MIThi) were synthesized starting from 4‐maleimido benzoic acid. Photoinduced radical homopolymerization of MIThi and its copolymerization with styrene were performed at room temperature to give linear polymers containing pendant thienyl moieties using ω,ω‐dimethoxy‐ω‐phenylacetophenone as an initiator. Copolymers' compositions and the equilibrium constant (K) for electron donor–acceptor complex formation suggest an alternating nature of the copolymerization. The monomer reactivity ratios and Alfrey–Price Q,e values were also determined. The thermal behavior of the new synthesized monomers and polymers was investigated by differential scanning calorimetry and thermogravimetric analysis. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 995–1004, 2002     

Photoinitiated cationic polymerization of limonene 1,2‐oxide and α‐pinene oxide

Limonene 1,2‐oxide (LMO) and α‐pinene oxide (α‐PO) are two high reactivity biorenewable monomers that undergo facile photoinitiated cationic ring‐opening polymerizations using both diaryliodonium salt and triarylsufonium salt photoinitiators. Comparative studies showed that α‐PO is more reactive than LMO, and this is because it undergoes a simultaneous double ring‐opening reaction involving both the epoxide group and the cyclobutane ring. It was also observed that α‐PO also undergoes more undesirable side reactions than LMO. The greatest utility of these two monomers is projected to be as reactive diluents in crosslinking photocopolymerizations with multifunctional epoxide and oxetane monomers. Prototype copolymerization studies with several difunctional monomers showed that LMO and α‐PO were effective in increasing the reaction rates and shortening the induction periods of photopolymerizations of these monomers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Electroinitiated copolymerization of indene and α-methylstyrene

Electroinitiated cationic copolymerization of indene and α-methylstyrene in dichloromethane has been investigated by constant potential electrolysis. The effects of copolymerization potential and the temperature on the copolymer composition was also studied. Constant potential electrolysis was found to be a suitable method to study the potential effects on copolymer compositions and the reactivity ratios of the monomers. The reactivity ratios were calculated according to integrated Lewis–Mayo equation.     

Influence of the catalyst on monomer insertion in the syndiospecific copolymerization of styrene and para‐methylstyrene

The effect of the kind of transition‐metal catalyst on the extent of comonomer insertion in the syndiospecific complex‐coordinative copolymerization of styrene and para‐methylstyrene has been investigated. The results for the influence of the polymerization conditions have shown that there is no real difference between solution copolymerization in toluene and solvent‐free styrene copolymerization in bulk, with respect to the reactivity ratio for para‐methylstyrene (r₂), under comparable conditions in the presence of methylaluminoxane and triisobutylaluminum and at low polymerization conversions. All the investigated catalysts lead to a preferred incorporation of para‐methylstyrene into the polymer chain in comparison with styrene and over the whole range of monomer compositions. The increasing capability of the different catalysts to provide copolymers with enhanced para‐methylstyrene concentrations can be summarized by the increasing r₂ values for the copolymerization in bulk as follows: η⁵‐pentamethylcyclopentadienyl titanium trichloride < η⁵‐octahydrofluorenyl titanium trimethoxide < η⁵‐octahydrofluorenyl titanium tristrifluoroacetate < η⁵‐cyclopentadienyl titanium(N,N‐dicyclohexylamido)dichloride < η⁵‐cyclopentadienyl titanium trichloride. For a correlation between the catalyst structure and the comonomer insertion, the catalysts can be described by electronic effects (electrostatic charge of the transition‐metal atom) and steric effects (minimum structural cone angle). The results show that the steric properties of the transition‐metal complexes have the most important effect on the insertion of para‐methylstyrene into the copolymer. If the minimum structural cone angle of the ligand of the transition‐metal catalyst decreases, the incorporation of the comonomer para‐methylstyrene increases significantly. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2061–2067, 2005     

Chain composition dependence of luminescence properties for copolymers of 2‐methoxy‐5‐2′‐ethyl‐hexyloxy‐1,4‐phenylenevinylene and 2,3‐diphenyl‐5‐octyl‐1,4‐phenylenevinylene

The copolymers of 2‐methoxy‐5‐2′‐ethyl‐hexyloxy‐1,4‐phenylenevinylene (MEH‐PV) and 2,3‐diphenyl‐5‐octyl‐1,4‐phenylenevinylene were prepared via the Gilch route with their chain compositions and the reactivity ratios of the monomers estimated by ¹H NMR spectroscopy. The results indicated that the copolymers tended to form an alternative copolymer as the feed ratio of the monomers closed to one‐half. When an individual copolymer solution in tetrahydrofuran was spun‐cast to form a film, the MEH‐PV units were able to attract the like units from the adjacent chains. As a result, the ultraviolet–visible absorption spectrum of the alternative copolymer in film form was broader than the spectra of those with different compositions. The photoluminescence spectra of the copolymers in film form exhibited the characteristic shoulder of poly(2‐methoxy‐5‐2′‐ethyl‐hexyloxy‐1,4‐phenylenevinylene), even though the content of MEH‐PV units was not great enough for the formation of repeat units in sequence. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2180–2186, 2003     

Synthesis and characterization of novel poly(vinyl chloride)‐based grafts: Poly(vinyl chloride‐co‐2‐chloropropene) fitted with multiple high‐glass‐transition‐temperature polyolefin branches

The tertiary chlorine (Cl^t) content of vinyl chloride/2‐chloropropene copolymers [P(VC‐co‐2CP)] was determined by NMR spectroscopy. Copolymers containing 6.8–47.0 Cl^t's per P(VC‐co‐2CP) chain were used to initiate the cationic grafting of α‐methylstyrene, norbornadiene, indene, and norbornene with Et₂AlCl under various conditions. Grafting was demonstrated by selective solvent extraction, and the effect of the experimental conditions on the grafting efficiency was examined. Select rheological and thermal characteristics of P(VC‐co‐2CP) grafts, including the glass‐transition temperature, heat deflection temperature, and discoloration upon heating, were studied. P(VC‐co‐2CP) carrying 7–11 poly(α‐methylstyrene) or polynorbornadiene branches per chain raised the glass‐transition temperature to, or above, that of a blend control. P(VC‐co‐2CP)s fitted with polyindene or polynorbornene branches were less effective in raising the mechanical properties. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3644–3651, 2002     

Free‐radical copolymerization of styrene and m‐isopropenyl‐α,α′‐dimethylbenzyl isocyanate studied by 1H NMR kinetic experiments

The free‐radical copolymerization of m‐isopropenyl‐α,α′‐dimethylbenzyl isocyanate (TMI) and styrene was studied with ¹H NMR kinetic experiments at 70 °C. Monomer conversion vs time data were used to determine the ratio k_p × k_t^?0.5 for various comonomer mixture compositions (where k_p is the propagation rate coefficient and k_t is the termination rate coefficient). The ratio k_p × k_t^?0.5 varied from 25.9 × 10^?3 L^0.5 mol^?0.5 s^?0.5 for pure styrene to 2.03 × 10^?3 L^0.5 mol^?0.5 s^?0.5 for 73 mol % TMI, indicating a significant decrease in the rate of polymerization with increasing TMI content in the reaction mixture. Traces of the individual monomer conversion versus time were used to map out the comonomer mixture composition drift up to overall monomer conversions of 35%. Within this conversion range, a slight but significant depletion of styrene in the monomer feed was observed. This depletion became more pronounced at higher levels of TMI in the initial comonomer mixture. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1064–1074, 2002     

Radical copolymerization of maleimide with ethyl α‐ethylacrylate and α‐ethylacrylic acid via RAFT

The copolymerization of maleimide (MI) with α‐ethylacrylic acid (EAA) and with ethyl α‐ethylacrylate (EEA) in the presence of 2‐phenylprop‐2‐yl dithiobenzoate (PPDB) was investigated. The copolymerization of MI and EAA was difficult to conduct with the reversible addition–fragmentation chain transfer (RAFT) mechanism because reinitiation of expelled radicals by fragmentation chain transfer was inhibited by the association of EAA in polar solvent and the strong interaction of the imino of MI with the carboxyl of EAA between the propagation chains. When the carboxylic group of EAA was esterified, then the copolymerization went well via RAFT, and alternating copolymers with controlled molecular weight were obtained. Combining by electron spin resonance showed a different result. It was found that before 30% of the comonomer conversion had occurred, the copolymer poly(EEA‐co‐MI) showed increasing molecular weight with the conversion and a rather narrow molecular weight distribution; then the molecular weight of the copolymer began to retard. This phenomenon of retardation was aggravated at high temperature. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3828–3835, 2004     

Direct functionalization of polyisobutylene by living initiation with α‐methylstyrene epoxide

This article describes the synthesis and characterization of polyisobutylene (PIB) carrying one primary hydroxyl head group and a tertiary chloride end group, [Ph? C(CH₃)(CH₂OH)–PIB–CH₂? C(CH₃)₂Cl] prepared with direct functionalization via initiation. The polymerization of isobutylene was initiated with the α‐methylstyrene epoxide/titanium tetrachloride system. Living conditions were obtained from ?75 to ?50 °C (198–223 K). Low molecular weight samples (number‐average molecular weight ～ 4000 g/mol) were prepared under suitable conditions and characterized by Fourier transform infrared and ¹H NMR spectroscopy. The presence of primary hydroxyl head groups in PIB was verified by both methods. Quantitative Fourier transform infrared with 2‐phenyl‐1‐propanol calibration and ¹H NMR performed on both the hydroxyl‐functionalized PIB and its reaction product with trimethylchlorosilane showed that each polymer chain carried one primary hydroxyl head group. The synthetic methodology presented here is an effective and simple route for the direct functionalization of PIB. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1005–1015, 2002     

Homo‐ and copolymers of hexafluoroisopropyl methacrylate and α‐fluoroacrylate with alkyl vinyl ethers: Microstructure and thermal properties

A study is reported, dealing with the microstructure and thermal behavior of the homopolymers of 1,1,1,3,3,3‐hexafluoroisopropyl methacrylate (HFIM) and 1,1,1,3,3,3‐hexafluoroisopropyl α‐fluoroacrylate (HFIFA), as well as of their copolymers with various vinyl ethers. The aim of this work was a better understanding of the role that fluorine content and distribution—first in the monomer and then along the ensuring macromolecular chain—play in determining the polymerizability of the selected vinyl monomers, and the final properties of the polymeric material. Primary (n‐butyl, isobutyl, 2‐ethylhexyl), secondary (cyclohexyl), and tertiary (tert‐butyl) vinyl ethers were employed as the comonomers. A general tendency towards comonomer alternation was observed upon radical initiated copolymerization with HFIFA. On the other hand, the relatively more electron‐rich HFIM did not usually yield strictly alternating sequences, unless the bulky tert‐butyl vinyl ether was employed. The incorporation of electron‐rich vinyl ether monomers within a partially fluorinated polymeric chain by simple radical initiated process was considered particularly interesting in view of the possible application of these materials as water‐repellent protective coatings. In this case, the fluorinated units should provide the low energy surface (water repellency) and, possibly, photo‐ and thermostability, whereas the vinyl ether counits should grant improved adhesion and adequate film‐forming properties. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 32–45, 2001     

Controlled radical copolymerization of β‐pinene and acrylonitrile

The feasibility of the radical copolymerization of β‐pinene and acrylonitrile was clarified for the first time. The monomer reactivity ratios evaluated by the Fineman–Ross method were r_β‐pinene = 0 and r_{acrylonitrile} = 0.66 in dichloroethane at 60 °C with AIBN, which indicated that the copolymerization was a simple alternating copolymerization. The addition of the Lewis acid Et₂AlCl increased the copolymerization rate and enhanced the incorporation of β‐pinene. The first example for the synthesis of an almost perfectly alternating copolymer of β‐pinene and acrylonitrile was achieved in the presence of Et₂AlCl. Furthermore, the possible controlled copolymerization of β‐pinene and acrylonitrile was then attempted via the reversible addition–fragmentation transfer (RAFT) technique. At a low β‐pinene/acrylonitrile feed ratio of 10/90 or 25/75, the copolymerization with 2‐cyanopropyl‐2‐yl dithiobenzoate as the transfer agent displayed the typical features of living polymerization. However, the living character could be observed only within certain monomer conversions. At higher monomer conversions, the copolymerizations deviated from the living behavior, probably because of the competitive degradative chain transfer of β‐pinene. The β‐pinene/acrylonitrile copolymers with a high alternation degree and controlled molecular weight were also obtained by the combination of the RAFT agent cumyl dithiobenzoate and Lewis acid Et₂AlCl. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2376–2387, 2006     

Degradable alternating polyperoxides from poly(ethylene glycol)‐substituted styrenic monomers with water solubility and thermoresponsiveness

Water soluble alternating copolymers were prepared by oxidative free radical copolymerization of 4‐vinylbenzyl methoxypoly(oxyethylene) ether (PEGSt) and molecular oxygen at 50 °C. NMR spectroscopy established alternate sequence of PEGSt and peroxy bonds ( O O ) along the polymer main‐chain. The obtained polymers show temperature induced hydrophilic to hydrophobic phase separation, confirmed by UV‐visible spectroscopy and dynamic light scattering. The cloud point temperature (T_CP) of the polymers can be tuned by changing the chain length of side‐chain poly(ethylene oxide) and incorporation of hydrophobic methyl methacrylate in the copolyperoxides. Exothermic degradation of these polyperoxides was confirmed by differential scanning calorimetry and the degradation products have been characterized by electron impact mass spectroscopy. Finally, N,N‐dimethylacrylamide was polymerized in the presence of these polyperoxides in toluene, highlighting their potential as polymeric free radical initiator during polymerization of vinyl monomers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2030–2038