Structural analysis of aggregates formed by a thermoresponsive homopolymer in dilute aqueous solutions

The aqueous solution of a thermoresponsive polymer, poly[2‐(2‐ethoxy) ethoxyethyl vinyl ether] poly(EOEOVE), contains a tiny amount of large polymer aggregates at low polymer concentrations far below the lower critical solution temperature (～40 °C). The molar mass M_w,slow, radius of gyration 〈S²〉, and hydrodynamic radius R_H,slow of the aggregating component of poly(EOEOVE) were obtained by simultaneous static and dynamic light scattering as functions of the polymer concentration and temperature, while the weight fraction w_slow of the component was estimated by size‐exclusion chromatography. The M_w,slow dependencies of 〈S²〉 and R_H,slow, as well as the ratio 〈S²〉/R_H,slow, indicated that the poly(EOEOVE) aggregate takes a sparsely branched polymer‐like conformation. We have analyzed the structure of the aggregate, using the branched polymer model of random type. The M_w,slow dependence of 〈S²〉 obtained was favorably compared with this model with reasonable structural parameters. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1179–1187, 2006     

Entanglement friction and dynamics in blends of starlike and linear polymer molecules

We investigate relaxation dynamics in a series of six‐arm star/linear 1,4‐polybutadiene blends with mechanical rheometry measurements. Blend systems are formulated to systematically probe constraint release and arm relaxation dynamics. Zero shear viscosity and terminal relaxation times of star/linear polymer blends with fixed star arm molecular weights (M_a) and compositions (?_S) are found to follow nonmonotonic dependencies on the linear polymer molecular weight (M_L). At low values of ?_S, at least two scaling regimes are apparent from the data (ξ₀ ～ M and ξ₀ ～ M), where ξ₀ refers to the zero shear viscosity or terminal relaxation time of the blend. The two regimes are separated by a critical linear polymer molecular weight M^* that is more than 20 times larger than the critical molecular weight for entanglements. When the linear polymer contribution to blend properties is removed, a clear transition from dilution dynamics, ξ₀ ～ M, to Rouse‐like constraint‐release dynamics, ξ₀ ～ M, is apparent at low values of ?_S. At higher ?_S values, a new activated constraint‐release dynamic regime is evident in which ξ₀ ～ M and ξ₀ ～ ?, where α changes continuously from approximately 2 to 0.5 as ?_S increases and β varies from 2.0 to 1.0 as M_L increases. The experimental results are compared with theoretical predictions based on a drag coupling model for entangled polymer liquids. All features observed experimentally are captured by this model, including the value of M^* for the transition from dilution to Rouse constraint‐release dynamics. Predictions of the drag coupling model are also compared with published data for the zero shear viscosity and terminal relaxation time in bidisperse linear polymer blends and pure entangled starlike molecules. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2501–2518, 2001     

Fractionation and characterization of a protein–polysaccharide complex from Pleurotus tuberregium sclerotia

A water‐soluble sample (TM4b), extracted from sclerotia of Pleurotus tuberregium, was analyzed using elemental analysis, one‐ and two‐dimensional ¹H and ¹³C NMR. The results indicated that TM4b was protein–polysaccharide complex, and the polysaccharide moiety was hyperbranched β‐D ‐glucan with residuals branched at C3, C2, C4, and C6 positions. A preparative size‐exclusion chromatography (SEC) column combined with nonsolvent addition method was used to fractionate TM4b, and nine fractions were obtained. Solution properties of TM4b in 0.15 M aqueous NaCl were studied using static laser light scattering and viscometry at 25 °C. The dependences of intrinsic viscosity ([η]) and radius of gyration (〈S²〉) on weight–average molecular weight (M_w) for TM4b in the M_w range from 1.89 × 10⁴ to 2.58 × 10⁶ were found to be [η] = 0.21M and 〈S²〉 = 3.63M. It indicated that TM4b existed as compact sphere conformation in the aqueous solution. Atomic force microscopy image further confirmed that the TM4b molecules exhibited globular shape in the solution. This work gave valuable information on fractionation and chain conformation characterization of the globular protein–polysaccharide complex. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2546–2554, 2007     

A Flory–Huggins thermodynamic approach for predicting sorption equilibrium in ternary polymer systems

The Flory–Huggins theory as modified by Pouchlý has been applied to calculate preferential (λ) and total (Y) sorption coefficients for a ternary polymer system. The ternary interaction function (?₁?₂?₃G_T(u₁, ?₃)) is described as the product of three independent binary functions. This expression allows prediction of λ and Y from binary interaction parameters χ, χ, g, g, and g₁₂(?₁₀). Three ternary polymer systems are used to check the validity of the expression. Moreover for polymer systems in which the parameters g and/or g are unknown, a procedure to evaluate them has been developed and verified on systems for which sufficient experimental information is available.     

Melt‐state polymer chain dimensions as a function of temperature

The unperturbed chain dimensions (〈R²〉_o/M) of cis/trans‐1,4‐polyisoprene, a near‐atactic poly(methyl methacrylate), and atactic polyolefins were measured as a function of temperature in the melt state via small‐angle neutron scattering (SANS). The polyolefinic materials were derived from polydienes or polystyrene via hydrogenation or deuteration and represent structures not encountered commercially. The parent polymers were prepared via lithium‐based anionic polymerizations in cyclohexane with, in some cases, a polymer microstructure modifier present. The polyolefins retained the near‐monodisperse molecular weight distributions exhibited by the precursor materials. The melt SANS‐based chain dimension data allowed the evaluation of the temperature coefficients [dln 〈R²〉_o/dT(κ)] for these polymers. The evaluated polymers obeyed the packing length (p)‐based expressions of the plateau modulus, G = kT/np³ (MPa), and the entanglement molecular weight, M_e = ρN_anp³ (g mol^?1), where n_t denotes the number (～21) of entanglement strands in a cube with the dimensions of the reptation tube diameter (d_t) and ρ is the chain density. The product np³ is the displaced volume (V_e) of an entanglement that is also expressible as pd or kT/G. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1768–1776, 2002     

Third virial coefficient of polystyrene in benzene

Second virial coefficients A₂ and third virial coefficients A₃ for benzene solutions of ten polystyrene fractions ranging in weight-average molecular weight M_w from 10⁴ to 2 × 10⁷ at 25°C were determined by light scattering. The third coefficient is represented approximately by A₃ = 8.0 × 10^?6 M mol g^?3 cm⁶ for M_w above 10⁵. In this molecular weight region, the factor g defined by A₃/AM_w/ This trend of g is consistent with predictions of early two-parameter theories but not with those of renormalization group theories. In particular, quantitative agreement is observed between the present experiments (for M_w ? 2 × 10⁵) and the mean-field two-parameter theory of Stockmayer and Casassa.     

Nonlinear rheology of highly entangled polymer solutions in start‐up and steady shear flow

Orientation angle and stress‐relaxation dynamics of entangled polystyrene (PS)/diethyl phthalate solutions were investigated in steady and step shear flows. Concentrated (19 vol %) solutions of 0.995, 1.81, and 3.84 million molecular weight (MW) PS and a semidilute (6.4 vol %) solution of 20.6 million MW PS were used to study the effects of entanglement loss on dynamics. A phase‐modulated flow birefringence apparatus was developed to facilitate measurements of time‐dependent changes in optical equivalents of shear stress (n₁₂ ≈ Cσ) and first normal stress differences (n₁ = n₁₁ ? n₂₂ ≈ CN₁) in a planar‐Couette shear‐flow geometry. Flow birefringence results were supplemented with cone‐and‐plate mechanical rheometry measurements to extend the range of shear rates over which entangled polymer dynamics are studied. In slow (τ > ) steady shear‐flow experiments using the ultrahigh MW polymer sample (20.6 × 10⁶ MW PS), steady‐state n₁₂ and n₁ results manifest unusual power‐law dependencies on shear rate [n_12,ss ～ ^0.4 and n_1,ss ～ ^0.8]. At shear rates in the range τ < < τ, steady‐state orientation angles χ_SS are found to be nearly independent of shear rate for all but the most weakly entangled materials investigated. For solutions containing the highest MW PS, an approximate plateau orientation angle χ_p in the range 20–24° is observed; χ_p values ranging from 14 to 16° are found for the other materials. In the start‐up of fast steady shear flow (γ˙ ≥ τ), transient undershoots in orientation angle are also reported. The molecular origins of these observations were examined with the help of a tube model theory that accommodates changes in polymer entanglement density during flow. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2275–2289, 2001     

Determination of molecular weight and its distribution of rigid‐rod polymers determined by phase‐modulated flow birefringence technique

The phase‐modulated flow birefringence (PMFB) method is widely accepted as one of the most sensitive and accurate techniques suitable for experimental tests on the molecular theory of polymer solutions. The objective of this study is to develop a systematic method to determine molecular weight and distribution of rigid‐rod polymers by the PMFB technique. Using molecular theory for rigid polymers, birefringence Δn and orientation angle χ have been expressed as a function of molecular weight and distribution. Δn has been shown to be proportional to Σc_iM, and cot 2χ turned out to have a linear relationship with Σc_iM/Σc_iM. From the experimental results for PBLG solutions, birefringence and orientation angle data were in some degree matched with the theory presented. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 509–515, 2000     

A fourier-transform infrared spectroscopic study of the surface hydrolysis of polythiazyl

The hydrolysis of (SN)_x, in air at room temperature and 90% relative humidity has been studied using the attenuated total reflectance (ATR) method. Decomposition gave rise to strong bands at 3210 and 3150 cm^–1 [v₃ and v₁ (NH)], 1420 cm^–1 (v_b NH), 1220 cm^–1 (S?O), 1089 and 610 cm^–1 [v₁ and v₃ (SO)]. For the first 3 days, the decay of the 808 and 690 cm^–1 bands of (SN)_x was first order, with a half life of about 30 h. The spectroscopic data were consistent with the rapid formation of ? SO₂? NH₂ and ?S?NH chain end groups with subsequent relatively slow hydrolysis to (NH₄)₂SO₄, sulfur, and fresh hydrolysable chain ends.     

Relaxation dynamics of salt‐free polyelectrolyte solutions using flow birefringence and rheometry

Relaxation dynamics of salt‐free, aqueous solutions of sodium poly(styrene sulfonate) (NaPSS) were investigated by mechanical rheometry and flow birefringence measurements. Two semidilute concentration regimes were studied in detail for a range of polymer molecular weights. At solution concentrations c < 10 mg mL, limiting shear viscosity η₀ was found to scale with molecular weight and concentration as η₀ ∼ c^0.5M_w over nearly two decades in concentration. At higher solution concentrations, c > 10 mg mL, a change in viscosity scaling was observed η₀ ∼ c^1.5M, consistent with a change from simple Rouse dynamics for unentangled polyions to near‐perfect reptation dynamics for entangled chains. Characteristic relaxation times τ deduced from shear stress and birefringence relaxation measurements following start‐up of steady shearing at high rates reveal very different physics. For c < 10 mg mL, both methods yield τ ∼ c^−0.42M and τ ∼ c⁰M for c > 10 mg mL. Curiously, the concentration scalings seen in both regimes are consistent with theoretical expectations for salt‐free polyelectrolyte solutions undergoing Rouse and reptation dynamics, respectively, but the molecular weight scalings are not. Based on earlier light scattering studies using salt‐free NaPSS solutions, we contend that the unusual relaxation behavior is likely due to aggregation and/or coupled polyion diffusion. Simultaneous stress and birefringence measurements suggest that in concentrated solution, NaPSS aggregates are likely well permeated by solvent, supporting a loose collective of aggregated chains rather than the dense polymer aggregates previously supposed. Nonetheless, polyion aggregates of either variety cannot account for the inverse dependence of relaxation time on polymer molecular weight for c < 10 mg mL. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 825–835, 1999     

Factors affecting the complexation of polyacrylic acid with uranyl ions in aqueous solutions: A luminescence study

A study was carried out in aqueous solutions using luminescence technique to investigate the effects of pH, salt concentration, and temperature on the polyacrylic acid/uranyl ion (PAA/UO) complex formation as well as competitive phenomena of enhancement and quenching effects on photoexcited state of uranyl ions. It was found that excess of H⁺ and OH^? is not favorable for complexation between uranyl ions and polymer. Added nitrate salts of Na⁺ and K⁺ had significant enhancement effect on emission spectra of PAA/UO complex. These results indicated that the metal ion/polymer chain complex collapsed by addition of salts and then complex became more compact with consequent phase separation. No significant effect of temperature on the PAA/UO complex stability has been observed between 25–50 °C. The quenching rate constants obtained from Stern–Volmer plots were found to be in the order of k_q(H⁺) >> k_q(K⁺) > k_q(Na⁺). © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2737–2744, 2005     

Counterion binding to poly(allylammonium) cation

Chloride ion activity coefficients in aqueous solutions of poly(allylamine) hydrochloride (PAA · HCl) have been determined both in the absence and the presence of simple salts. Without added salt, the activity coefficient depends on the polymer concentration. With added salt, the binding of added counterions by PAAH⁺ is evaluated from the release of chloride ion. The extent of interaction between counterions and PAAH⁺ at a given polymer concentration decreases in the order SO ? ClO > NO > Cl^? > Br^? > I^?. This order of counterion selectivity agrees with the previous estimation of potentiometric titrations. The result shows that the hydration of the counterion, as well as its charge, plays an important part in counterion binding to the polyion.     

Solid‐state nuclear magnetic resonance relaxation times in crosslinked macroporous polymer particles of divinylbenzene homopolymers

Monodisperse porous particles of poly(divinylbenzene) prepared by the activated swelling method have been investigated by solid‐state ¹³C crosspolarization magic‐angle spinning (CPMAS) nuclear magnetic resonance (NMR) relaxation measurements. Homopolymeric combinations of two porogens (toluene and 2‐ethylhexanoic acid) and two monomers (meta‐ and para‐divinylbenzene) were studied. Residual vinyl groups were systematically reacted with increasing amounts of bromine, producing 20 different polymers samples for which we measured crosspolarization times, T_CH, proton rotating frame spin‐lattice relaxation, T, ¹³C spin‐lattice relaxation, T, and proton spin‐lattice relaxation, T. These parameters were chosen to reflect expected changes in a wide range of frequencies of motion as a function of structure. Relative differences in the molecular mobility of the major functional groups (aromatic, vinyl and aliphatic) is related to initial reactants used, vinyl concentration, relative reactivity of vinyl groups, distribution of vinyl groups, pore structure, and degree of crosslinking. Variable temperature ¹H combined rotation and multiple pulse NMR (CRAMPS) was used to derive activation energies for selected samples via measurement of the proton spin‐lattice relaxation time, T. Irreversible thermal effects were observed in ambient temperature relaxation after heating to temperatures in the range of 393–418 K. Simple univariate statistical analyses failed to reveal consistent correlations among the known variables. However, the application of more sophisticated multivariate and neural network analyses allowed excellent structure–property predictions to be made from the relaxation time data. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1307–1328, 1999     

Rheological properties of poly(lactides). Effect of molecular weight and temperature on the viscoelasticity of poly(l‐lactic acid)

The dynamic viscoelastic behavior of Poly(l‐lactic acid) (PLLA), with molecular weights ranging from 2,000 to 360,000, have been studied over a broad range of reduced frequencies (approximately 1 × 10⁻³ s⁻¹ to 1 × 10³ s⁻¹), using time–temperature superposition principle. Melts are shown to have a critical molecular weight, M_c, of approximately 16,000 g/mol, and an entanglement density of 0.16 mmol/cm³ (at 25°C). PLLA polymers are noted to require substantially larger molecular weights in order to display similar melt viscoelastic behavior, at a given temperature, as that for conventional non‐biodegradable polymers such as polystyrene. The reason for this deviation is suspected to be due to steric hindrance, resulting from excessive coil expansion or other tertiary chain interactions. PLLA melts show a dependence of η₀ on chain length to the 4.0 power (M), whilst J is independent of M_W in the terminal region. Low molecular weight PLLA (∼ 40,000) shows Newtonian‐like behavior at shear rates typical of those achieved during film extrusion. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1803–1814, 1999     

Crystallization studies of poly(trimethylene terephthalate) using thermal analysis and far‐infrared spectroscopy

Crystallization of poly(trimethylene terephthalate) (PTT) by annealing was examined using density measurement, differential scanning calorimetry, and far‐infrared spectroscopy (FIR). Crystallinity, measured by density, increased slowly up to the T_a of 185 °C and increases rapidly once T_a exceeds 185 °C. It was found that thermally induced crystallization is mainly temperature‐dependent above T_a = 185 °C and temperature‐ and time‐dependent below T_a = 60 °C. Two melting transitions, T and T, were observed for those samples annealed above 120 °C. No significant change in T was observed as a function of T_a while T showed strong dependency on T_a. Digital subtraction of the amorphous contribution from the semicrystalline FIR spectra provided characteristic spectra of amorphous and crystalline PTT. The bands at 373, 282, and 92 cm^?1 were assigned to the crystalline phase, while the bands at 525, 406, and 351 cm^?1 were attributed to the amorphous phase. It was shown that FIR spectroscopy can be used as a means to estimate the degree of crystallinity of PTT. The band ratio of 373 and 501 cm^?1 was plotted against crystallinity measured by density and reasonably good correlation was obtained. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1675–1682, 2007     

A new proposal for polymer dynamics in steady shearing flows

Beginning with a recently proposed expression for the drag force on a single macromolecule pulled with constant velocity through a fluid of long‐entangled molecules (V. R. Mhetar and L. A. Archer, Macromolecules 1998, 31, 6639), we investigate the effect of entanglement loss on polymer dynamics in steady shearing flows. At steady‐state, a balance between the elastic restoring force and viscous drag acting on entangled polymer segments reveals a critical molecular strain γ_m,c beyond which the drag force exerted on polymer molecules by their neighbors is insufficient to support arbitrarily small orientation angles. Specifically, we find that in fast steady shear flows τ < γ˙ < τ, polymer orientation in the shear plane approaches a limiting angle χ_c ≈ atau(1/(1 + γ_m,c)) beyond which flow becomes incapable of producing further molecular alignment. Shear flow experiments using a series of concentrated polystyrene/diethyl phthalate solutions with fixed entanglement spacing, but variable polymer molecular weight 0.94 × 10⁶ ≤ M_w ≤ 5.48 × 10⁶, reveal a limiting steady‐state orientation angle between 6° and 9° over a range of shear rates; confirming the theoretical result. Orientation angle undershoots observed during start‐up of fast steady shearing flows are also explained in terms of a transient imbalance of elastic restoring force and viscous drag on oriented polymer molecules. Our findings suggest that the Doi–Edwards affine orientation tensor (Q) is not universal, but rather depends on deformation type and deformation history through a balance of elastic force and viscous drag on polymer molecules. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 222–233, 2000     

Spin probe mobility in relation to free volume and relaxation dynamics of glass‐formers: A series of spin probes in poly(isobutylene)

We present the dynamics of a series of three paramagnetic molecules of different volume, mass, and shape in amorphous glass‐forming polymer poly(isobutylene) (PIB) as investigated by means of electron spin resonance (ESR) technique. The reorientation behavior of spin probes is related to the ortho‐positronium (o‐Ps) annihilation in PIB from positron annihilation lifetime spectroscopy (PALS) and the extracted free volume information. It is also related to the dynamic data of PIB from broadband dielectric spectroscopy (BDS), neutron scattering (NS), and nuclear magnetic resonance (NMR) spectroscopy from literature. In the case of the smallest spin probe, 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO), a discontinuous course of the spectral parameter 2A_zz′ versus T dependence was observed and the subsequent phenomenological model‐free analyses of the spectral parameter, 2A_zz′ versus T, as well as of the correlation time, τ_c, versus 1/T plots provided the characteristic ESR temperatures ( , T_50G, ) and (T, T, T). These characteristic ESR temperatures were found to be consistent with the characteristic PALS temperatures: T, T = T from temperature dependences of the mean o‐Ps lifetime, τ₃, or the width of o‐Ps lifetime distribution, σ₃, respectively. In addition, the relationships between the spin probe size, V, and the free volume hole size distributions g_n(V_h) at the characteristic ESR temperatures indicate the significant influence of the free volume fluctuation at the crossover from slow to rapid regime as well as within the rapid motional regime. On the other hand, the two larger spin probes exhibit a rather continuous 2A_zz′–T plots with the respective T_50G's lying in the vicinity of T independently of their volume, mass and shape, suggesting the common origin of underlying process controlling this T_50G transition. Finally, these mutual PALS and ESR findings were compared with the known dynamic behavior of PIB which suggest that the dynamics of the TEMPO and the larger spin probes are related to free volume fluctuation associated with primary α ‐ and secondary β processes, respectively. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1058–1068, 2009     

Properties of iodine complexes of monosubstituted polyacetylenes

Iodine complexes of six monosubstituted polyacetylenes with methyl, ethyl, propyl, pentyl, t-butyl, and phenyl substituents have been characterized by electronic spectroscopy. UV spectra allow the determination of the nature and the amount of active species, and photoelectronic spectra confirm the nature of these species. These measurements indicate the presence of iodine in the I and I₂ forms. The concentration of I is low (0.12–4.0 mol%), and it depends on the nature of the substitutent, but this amount does not decrease when the films are left under vacuum. On the other hand, the adsorption of ε high concentration of iodine is possible; this adsorption is governed by a diffusion mechanism and is reversible. Iodine doping leads to a cis-to-trans isomerization of the polymers, except for poly(3-3-dimethyl-1-butyne), which can be isomerized to the cis or to the trans form, depending on the solvent employed. Electrical properties of polymer I complexes are also reported. Conductivities of about 10^?4 Ω^?1 cm^?1 are obtained for all polymers in the presence of an excess of iodine.     

New simple method of measuring the surface glass transition temperature of polymers

A lap‐shear joint mechanical testing method has been probed to measure the surface glass transition temperature (T) of the thick bulk films of high‐molecular‐weight polymers. As T, the temperature transition “occurrence of autoadhesion–nonoccurrence of autoadhesion” has been proposed. The influence of chain flexibility, of molecular architecture, of polymer morphology, and of chain ends concentration on the T has been investigated. The correlation between the reduction in T with respect to the glass transition temperature of the bulk (T) and the intensity of the intermolecular interaction in the polymer bulk in amorphous polymers has been found. The effect of surface roughness on T has been discussed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 2012–2021, 2010     

A procedure for predicting sorption equilibrium in ternary polymer systems from Flory–Huggins binary interaction parameters and the inversion point of preferential solvation

A procedure has been developed, based on the Flory–Huggins theory as generalized by Pouchlý, which permits the calculation of preferential (λ) and total (Y) sorption coefficients from previous information on the binary interaction parameters, χ, χ, and g₁₂(?₁₀) and on the mixture composition at which the sign of λ inverts. The expressions obtained were applied to 10 cosolvent polymer systems for which experimental values of λ and Y are known. Practically in all the studied systems, the theoretical predictions are in fair accordance with the experimental data.