The Quest for Mononuclear Gold(II) and Its Potential Role in Photocatalysis and Drug Action

The chemistry of gold strongly focuses on the ubiquitous oxidation states +I and +III. The intermediate oxidation state +II is generally avoided in mononuclear gold species. In recent years, gold(II) has been increasingly suggested as a key intermediate in artificial photosynthesis systems, with gold(III) moieties acting as electron acceptors, as well as in gold‐catalyzed photoredox catalysis and radical chemistry. This Minireview provides a concise summary of confirmed and characterized mononuclear open‐shell gold(II) complexes. Recent findings on structural motifs and reactivity patterns will be discussed. Exciting developments in the fields of photosynthesis, photocatalysis, and potential roles in medicinal chemistry will be outlined.     

Androgynous porphyrins. Silver(II) quinoxalinoporphyrins act as both good electron donors and acceptors

The metal-centered and macrocycle-centered electron-transfer oxidations and reductions of silver(II) porphyrins were characterized in nonaqueous media by electrochemistry, UV-vis spectroelectrochemistry, EPR spectroscopy, and DFT calculations. The investigated compounds are {5,10,15,20-tetrakis(3,5-di-tert-butylphenyl)porphyrinato}silver(II), {5,10,15,20-tetrakis(3,5-di-tert-butylphenyl)quinoxalino[2,3-b']porphyrinato}silver(II), {5,10,15,20-tetrakis(3,5-di-tert-butylphenyl)bisquinoxalino[2,3-b':7,8-b']porphyrinato}silver(II), and {5,10,15,20-tetrakis(3,5-di-tert-butylphenyl)bisquinoxalino[2,3-b':12,13-b']porphyrinato}silver(II). The first one-electron oxidation and first one-electron reduction both occur at the metal center to produce stable compounds with Ag(III) or Ag(I) metal oxidation states, irrespective of the type of porphyrin ligand. The electrochemical HOMO-LUMO gap, determined by the difference in the first oxidation and first reduction potentials, decreases by introduction of quinoxaline groups fused to the Ag(II) porphyrin macrocycle. This provides a unique androgynous character to Ag(II) quinoxalinoporphyrins that enables them to act as both good electron donors and good electron acceptors, something not previously observed in other metalloporphyrin complexes. The second one-electron oxidation and second one-electron reduction of the compounds both occur at the porphyrin macrocycle to produce Ag(III) porphyrin pi-radical cations and Ag(I) porphyrin pi-radical anions, respectively. The macrocycle-centered oxidation potentials of each quinoxalinoporphyrin are shifted in a negative direction, while the macrocycle-centered reduction potentials are shifted in a positive direction as compared to the same electrode reactions of the porphyrin without the fused quinoxaline ring(s). Both potential shifts are due to a stabilization of the radical cations and radical anions by pi-extension of the porphyrin macrocycle after fusion of one or two quinoxaline moieties at the beta-pyrrolic positions of the macrocycle. Introduction of quinoxaline groups fused to the Ag(II) porphyrin macrocycle provides a unique androgynous character to Ag(II) quinoxalinoporphyrins that enables them to act as both good electron donors and good electron acceptors.     

Kinetically locked, trinuclear Ru(II) metallo-macrocycles--synthesis, electrochemical, and optical properties

Using a [Ru(II)([9]aneS3)] templating moiety, kinetically-locked, metallomacrocycles incorporating adenine based ligands have been synthesised through self-assembly. The kinetically robust nature of these structures is confirmed by electrochemical studies: each can be reversibly oxidised in a four-member redox series, containing two formally mixed valence states. Unusually, the electrochemically derived comproportionation constants for these mixed valence states are very different, suggesting that intermetallic coupling differs between the two states. Spectroelectochemistry studies confirm that while the [Ru(II)2Ru(III)] state is valence localised, the [Ru(II)Ru(III)2] state is electronically delocalised. Mechanisms by which this switching effect could occur, which involve the unusual connectivities in these mixed valence species, are presented.     

The RhX n (X = S,Se, Te) Coordination Polyhedra in Crystal Structures

The Voronoi–Dirichlet polyhedra (VDP) and the method of intersecting spheres were applied to crystal-chemical analysis of all known compounds whose structures contain rhodium atoms surrounded by chalcogen atoms. The influence of the rhodium valence state and the nature of the chalcogen on the main features of Rh stereochemistry are discussed. Rhodium atoms exhibit coordination numbers of 6, 5, or 4 with respect to S, Se, or Te atoms; in addition to the bonds with chalcogens, rhodium can form 1 to 4 bonds with metal atoms. The VDP volume for Rh(III), Rh(2.67), and Rh(II) atoms in selenides and tellurides very weakly depends on the valence state, whereas in the case of sulfides, the volume increases rather regularly with a decrease in the metal oxidation number from Rh(III) to Rh(I).     

Structural, magnetic coupling and oxidation state trends in models of the CaMn4 cluster in photosystem II

Density functional theory calculations are reported on a set of isomeric structures I, II and III that share the structural formula [CaMn4C9H10N2O16]q+.(H2O)3 (q= -1, 0, 1, 2, 3). Species I has a skeletal structure, which has been previously identified as a close match to the ligated CaMn4 cluster in Photosystem II, as characterized in the most recent 3.0 angstroms crystal structure. Structures II and III are rearrangements of I, which largely retain that model's bridging ligand framework, but feature metal atom positions broadly consistent with, respectively, the earlier 3.5 and 3.2 angstroms crystal structures for the Photosystem II water-oxidising complex (WOC). Our study explores the influence of the cluster charge state (and hence S state) on several important properties of the model structures; including the relative energies of the three models, their interconversion, trends in the individual Mn oxidation states, preferred hydration sites and favoured modes of magnetic coupling between the manganese atoms. We find that, for several of the explored cluster charge states, modest differences in the bridging-ligand geometry exert a powerful influence over the individual manganese oxidation states, but throughout these states the robustness of the tetrahedron formed by the Ca and three of the Mn atoms remains a significant feature and contrasts with the positional flexibility of the fourth Mn atom. Although structure I is lowest in energy for most S states, the energy differences between structures for a given S state are not large. Overall, structure II provides a better match for the EXAFS derived metal-metal distance parameters for the earlier S states (S0 to S2), but not for S3 in which a significant structural change is observed experimentally. In this S state structure III provides a closer fit. The implications of these results, for the possible action of the WOC, are discussed.     

Heteroleptic copper switches

Heteroleptic copper compounds have been designed and synthesized on solid supports. Chemical redox agents were used to change the oxidation state of the SiO(2)-immobilized heteroleptic copper compounds from Cu(I) to Cu(II) and then back to Cu(I). Optical spectroscopy of a dimethyl sulfoxide suspension demonstrated the reversibility of the Cu(I)/Cu(II) SiO(2)-immobilized compounds by monitoring the metal-to-ligand charge transfer peak at about 450 nm. Electron paramagnetic resonance spectroscopy was used to monitor the isomerization of Cu(I) tetrahedral to Cu(II) square planar. This conformational change corresponds to a 90° rotation of one ligand with respect to the other. Conductive atomic force microscopy and macroscopic gold electrodes were used to study the electrical properties of a p(+) Si-immobilized heteroleptic copper compound where switching between the Cu(I)/Cu(II) states occurred at -0.8 and +2.3 V.     

Redox transitions of chromium, manganese, iron, cobalt and nickel protoporphyrins in aqueous solution

The electrochemical redox behavior of immobilized chromium, manganese, iron, cobalt, and nickel protoporphyrins IX has been investigated over the pH 0-14 range. In the investigated potential domain the metalloporphyrins were observed in four different oxidation states (M(I), M(II), M(III) and M(IV)). The metalloporphyrins differ in the potentials at which the redox transitions occur, but the observed pH dependence of the redox transitions was similar for the different metalloporphyrins and revealed that the M(II)/M(III) and M(III)/M(IV) transitions were accompanied by a hydroxide transfer at high pH. The fact that the metalloporphyrins are immobilized on graphite does not seem to have a large influence on their redox behavior, as can be deduced from the comparable behavior of immobilized metalloporphyrins on gold and of watersoluble metalloporphyrins in solution. We also performed density functional theory (DFT) calculations on the metalloporphyrins in different oxidation states. The geometries and spin states predicted by these calculations agree well with experimentally determined values; the calculations were also able to predict the electrochemical potentials of the [M(II)]/[M(III)-OH] redox transition to within about 300 mV.     

A microelectrode study of the mechanism of the reactions of silver(II) with manganese(II) and chromium(III) in sulphuric acid

The variation of the steady state limiting current for the Ag(I)/Ag(II) oxidation wave with the radius of the microdisc electrode, concentration and temperature has been used to probe the kinetics and mechanisms for the reactions of silver(II) with manganese(II) and chromium(III) in 10 mol dm⁻³ sulphuric acid. It is shown that the current density for the silver(I) mediated oxidation of manganese(II) is controlled by the diffusion of manganese(II) to the surface except for microelectrodes with radii below 5 μm. On the other hand, the current density for the mediated oxidation of chromium(III) is determined by the rate of the Ag(II)/Cr(III) reaction over a range of conditions. In contrast to the Ag(II)/water reaction, its kinetics can be fitted to a mechanism where the initial electron transfer from Cr(III) to the Ag(II) is the rate determining step.     

Cation-exchange behaviour of the platinum group and some other rare elements in hydrobromic acid-thiourea-acetone media

Ion-exchange distribution coefficients and elution curves are presented for copper(I), silver, gold(I), palladium, platinum(II), rhodium(III), iridium(III), ruthenium(III), osmium(III), mercury(II), thallium(I), tellurium(II), lead and bismuth in mixtures of thiourea, hydrobromic acid, acetone and water, with the cation-exchange resin AGW50W-X4. The system affords excellent separations of rhodium, mercury, silver (or copper), tellurium, gold, and palladium (or platinum) from each other.     

Determination of Gold, Silver, and Copper in Gold-Base Alloys by Potentiostatic Coulometry

The working conditions for the simultaneous coulometric determination of 0.5 to 3 mg of gold, silver, and copper with a relative standard deviation of at most 0.5% were found in the study of the voltammetric behavior of Au(III), Ag(I), and Cu(II) at a platinum electrode in a 2 M HCl + 0.1 M KCNS solution. Fivefold mass amounts of gold with respect to silver and copper did not interfere with their determination. The three elements can be triply determined in a single portion of a solution using the alternate cathodic and anodic polarization of the electrode ensuring the complete deposition and stripping of Au(0) and Ag(0) and the complete reduction and oxidation of Cu(II) Cu(I). The mechanism of current formation due to the chemical reaction of Au(I) disproportionation and its effect on the results of gold determination were studied using the current–time curves. Experimental conditions were proposed to eliminate this reaction. The procedure was used for determining the composition of ternary jewelry alloys containing different amounts of gold, silver, and copper without their preliminary separation.     

Acyl Migration versus Epoxidation in Gold Catalysis: Facile,Switchable, and Atom-Economic Synthesis of Acylindoles and Quinoline Derivatives

We report a switchable synthesis of acylindoles and quinoline derivatives via gold-catalyzed annulations of anthranils and ynamides. α-Imino gold carbenes, generated in situ from anthranils and an N,O-coordinated gold(III) catalyst, undergo electrophilic attack to the aryl π-bond, followed by unexpected and highly selective 1,4- or 1,3-acyl migrations to form 6-acylindoles or 5-acylindoles. With the (2-biphenyl)di-tert-butylphosphine (JohnPhos) ligand, gold(I) carbenes experienced carbene/carbonyl additions to deliver quinoline oxides. Some of these epoxides are valuable substrates for the preparation of 3-hydroxylquinolines, quinolin-3(4H)-ones, and polycyclic compounds via facile in situ rearrangements. The reaction can be efficiently conducted on a gram scale and the obtained products are valuable substrates for preparing other potentially useful compounds. A computational study explained the unexpected selectivities and the dependency of the reaction pathway on the oxidation state and ligands of gold. With gold(III) the barrier for the formation of the strained oxirane ring is too high; whereas with gold(I) this transition state becomes accessible. Furthermore, energetic barriers to migration of the substituents on the intermediate sigma-complexes support the observed substitution pattern in the final product.     

Bond valence sums in coordination chemistry. Calculation of the oxidation state of chromium in complexes containing only Cr-O bonds and a redetermination of the crystal structure of potassium tetra(peroxo)chromate(V)

A simple method for calculating the oxidation state of Cr in complexes containing only Cr-O bonds is presented. A total of 242 CrOn fragments with n = 3-6 were retrieved from the Cambridge Structural Database (CSD) and, together with the data for K3CrO8, were analyzed using the bond valence sum method. New R0 values for Cr(II) of 1.739(21) A, Cr(III) of 1.708(7) A, Cr(V) of 1.762(14) A, and Cr(VI) of 1.793(7) A were derived. An average R0 value of 1.724 A for Cr-O reproduces the oxidation state of 96 of the 110 Cr(II), Cr(III), and Cr(IV) CrOn complexes (n = 3-6) and that of K3CrO8 within 0.30 valence units. The crystal structure of K3CrO8 was redetermined at 173 K to provide accurate data for a Cr complex with both high oxidation state and coordination number. Potassium tetraperoxochromate(V), K3CrO8, is tetragonal, Space group I42m, a = b = 6.6940(3) A, c = 7.7536(5) A, Z = 2. The difficulties with fitting the observed valence for Cr(V) and Cr(VI) complexes with coordination numbers 4 and 5 are discussed. The use of bond valence sums in gaining chemical insight into Cr complexes with noninnocent ligands and in establishing oxidation states in Cr clusters is presented. An analysis of the Cr-O bond distances used in the calculations shows a large range of values that can be understood in terms of the bond valence sum calculation.     

Acyl Migration versus Epoxidation in Gold Catalysis: Facile,Switchable, and Atom‐Economic Synthesis of Acylindoles and Quinoline Derivatives

We report a switchable synthesis of acylindoles and quinoline derivatives via gold‐catalyzed annulations of anthranils and ynamides. α‐Imino gold carbenes, generated in situ from anthranils and an N,O‐coordinated gold(III) catalyst, undergo electrophilic attack to the aryl π‐bond, followed by unexpected and highly selective 1,4‐ or 1,3‐acyl migrations to form 6‐acylindoles or 5‐acylindoles. With the (2‐biphenyl)di‐tert‐butylphosphine (JohnPhos) ligand, gold(I) carbenes experienced carbene/carbonyl additions to deliver quinoline oxides. Some of these epoxides are valuable substrates for the preparation of 3‐hydroxylquinolines, quinolin‐3(4H)‐ones, and polycyclic compounds via facile in situ rearrangements. The reaction can be efficiently conducted on a gram scale and the obtained products are valuable substrates for preparing other potentially useful compounds. A computational study explained the unexpected selectivities and the dependency of the reaction pathway on the oxidation state and ligands of gold. With gold(III) the barrier for the formation of the strained oxirane ring is too high; whereas with gold(I) this transition state becomes accessible. Furthermore, energetic barriers to migration of the substituents on the intermediate sigma‐complexes support the observed substitution pattern in the final product.     

A rapid and precise microheterometric determination of mercury with p-dimethylamino-benzylidene-rhodanine

1. In citrate or tartrate solutions mercury formed three different compounds with p-dimethyl-amino-benzylidene-rhodanine at pH ~5,~7 and ~9.The composition of the compounds is discussed. 2. Analytical methods are presented for the determination of 0.1 mg mercury in 20 ml solution which contained 99.5–99.9% foreign metals. In most cases the error lay between zero and 1%. The foreign metals were :Ca, Ba, Mg, Zn, Mn, Ni, Co, Al, Cr(III), Fe(III), Cd, Cu, Pb, U(VI), Tl(I), Th, Ce(III), Sb(III) and Bi(III). Methods for the determination of 0.1 mg mercury in gold (III), Pt(VI), Pd(II) and silver are also presented.     

Gold nanoparticles deposited on SiO2/Si100: correlation between size,electron structure,and activity in CO oxidation

Nanosize gold particles were prepared by Ar(+) ion implantation of 10-nm thick gold film deposited onto a SiO(2)/Si(100) wafer possessing no catalytic activity in the CO oxidation. Along with size reduction the valence band of the gold particles and the actual size were determined by ultraviolet- and X-ray photoelectron spectroscopy (UPS, XPS) and by transmission electron microscopy (TEM) as well as atomic force microscopy (AFM), respectively. The catalytic activity was determined in the CO oxidation. Energy distribution of the photoelectrons excited from 5d valence band of gold was strongly affected by Ar(+) implantation. This variation was interpreted by the redistribution of the valence band density of states (DOS). The intrinsic catalytic activity of the gold particles increased with decreasing size. When an Au/FeO(x) interface was created by FeO(x) deposition on large gold nanoparticles, a significant increase in the rate of the CO oxidation was observed. These data can be regarded as an experimental verification of the correlation between the catalytic activity and valence band density of states of gold.     

Synthesis and reactivity of N-methyl and N-phenyl meso-unsubstituted N-confused porphyrins

Condensations of 1-methyl and 1-phenyl-2,4-pyrroledicarbaldehydes with a tripyrrane in TFA-dichloromethane, followed by oxidation with aqueous FeCl(3), gave novel cross-conjugated meso-unsubstituted N-confused porphyrins (NCPs; 12). These porphyrin analogues showed significant diatropic ring currents that were enhanced upon protonation. Reactions with nickel(II) acetate in refluxing DMF, or palladium(II) acetate in acetonitrile, gave good yields of the corresponding nickel(II) or palladium(II) organometallic derivatives 18 and 19. These complexes were stable and the proton NMR spectra showed slightly increased downfield shifts to the external protons. Addition of TFA resulted in C-protonation at the internal carbon to give aromatic cations that showed the inner CH resonance between -2.5 and -4.0 ppm. The nickel(II) cations 20a and 20b slowly underwent demetalation but the related palladium cations 20c and 20d were quite robust and showed no loss of palladium after 1 week at room temperature. Reaction of NCPs 12 with silver(I) acetate gave silver(III) derivatives 21a and 21b where an oxidation had occurred at C-3 to afford a lactam unit. The silver complexes showed strong diatropic ring currents and porphyrin-like UV-vis spectra with a Soret band near 430 nm. N-Methyl NCP 21a also reacted with gold(III) acetate to give the gold(III) NCP 21c, albeit in low yield, and this species showed similar spectroscopic properties to silver(III) NCP 21a. Syntheses of N-phenyl NCP 12b were accompanied by the formation of the 3-oxo derivative 15b, and the related N-methyl product 16a could also be obtained when the reaction mixtures were oxidized with silver(I) acetate under acidic conditions. The proton NMR spectra for these aromatic NCPs in CDCl(3) show the internal CH shifted upfield to near -6.5 ppm, while the external meso-protons are strongly deshielded giving 4 singlets between 9 and 10 ppm. This study demonstrates that meso-unsubstituted NCPs have unusual reactivity and unique spectroscopic properties, and these results complement and extend the work on the much better known meso-tetraaryl NCPs.     

New riches in carbaporphyrin chemistry: silver and gold organometallic complexes of benzocarbaporphyrins

The NH-N-NH-N core of the porphyrin system represents one of the best studied and most versatile platforms for coordination chemistry. However, the replacement of one or more of the interior nitrogens with carbon atoms would be expected to diminish the ability of these systems to form metallo derivatives considerably. Despite this expectation, carbaporphyrinoid systems have been shown to form stable organometallic derivatives. Although azuliporphyrins and benziporphyrins act as dianionic ligands, benzocarbaporphyrins are trianionic ligands. Treatment of five different meso unsubstituted benzocarbaporphyrins and two different meso tetraarylbenzocarbaporphyrins with excess silver(I) acetate afforded 65-97% yields of the corresponding silver(III) organometallic derivatives. The insertion of silver metal was confirmed by mass spectrometry and X-ray crystallography. The UV-vis spectra showed a strong Soret band at wavelengths between 437 and 451 nm, together with a series of Q-type bands at longer wavelengths. The new metallo carbaporphyrins demonstrate the presence of a strong diatropic ring current in their proton NMR spectra, and carbon-13 NMR spectroscopy indicates that the derivatives retain a plane of symmetry. The reaction of meso tetraaryl carbaporphyrins with gold(III) acetate afforded the related gold(III) complexes, and these also showed strongly porphyrin-like aromatic characteristics. The UV-vis spectra for the gold complexes again showed a strong Soret band between 437-439 nm, but a secondary band near 400 nm is somewhat intensified for the gold species compared to the spectra for the related silver(III) meso tetrasubstituted carbaporphyrins. The ring currents observed for the gold(III) complexes by proton NMR spectroscopy were comparable to those of the silver(III) derivatives, implying that both series have similar macrocyclic conformations. Cyclic voltammetry was performed on two different carbaporphyrins, their silver(III) derivatives, and a gold(III) complex. The silver complexes display a reversible cathodic wave that is assigned to the Ag(III/II) couple. However, the gold porphyrinoid gave a value for the reductive wave that could be due to a gold(III/II) couple or a ligand-based process.     

Carbon-cobalt bond distance and bond cleavage in one-electron reduced methylcobalamin: a failure of the conventional DFT method

Geometry optimizations at the HF, B3LYP, and CASSCF levels of electronic structure theory have been performed for methylcobalamin (MeCbl) model compounds in both the Co(III) (MeCbl(III)) and Co(II) (MeCbl(II)) formal oxidation states. Since the HOMO-LUMO and C-Co sigma-sigma MO gaps are significantly smaller in the MeCbl(II) compounds compared with MeCbl(III), a pseudo-Jahn Teller effect is possible. CASSCF calculations show that there is strong coupling between C-Co sigma-sigma MOs for the MeCbl(II) models leading to strong state mixing with significant total charge density transfer (approximately 0.4 e-), mainly from the C-Co sigma MO to C-Co sigma MO (approximately 0.3 e-). CASSCF(9:7) calculations show that the strong state mixing leads to an increase in the C-Co bond length for MeCbl(II) model compounds from 1.969 A (DFT and HF calculations) to 2.164 A in the base-on MeCbl(II) model and from 1.938 A to 2.144 A in the base-off MeCbl(II) model. Concomitantly, the Co-N axial bond length increases from 2.121 A (DFT) to 2.344 A in the CASSCF calculation. This coupling interaction between states can be used to explain the much lower Co-C bond dissociation enthalpy and much faster bond cleavage rate for the one-electron reduced methylcobalamin radical anion compared to MeCbl(III). It may also be important for axial bond distances in other Co(II) compounds.     

Mixed Valence Chemistry of Pyrimidine Bridged Binuclear Complex of Pentacyanoferrate and Pentaammineruthenium

The pyrimidine bridged binuclear complex (CN)₅FepymRu(NH₃)₅- (I) was prepared in aqueous solution by mixing cquimolar of Fe(CN)₅OH₂^3? and Ru(NH₃)₅pym²⁺. Its mixed valence state molecule (CN)₅FepymRu(NH₃)₅(II) was obtained upon oxidation of I by one equivalent of peroxydisulfate ion. Both binuclear complexes and corresponding Fe(II) and Ru(II) mononuclear complexes displayed a metal-to-ligand charge transfer absorption in 400–450 nm region. Rate constants of formation and dissociation of I and II were measured, and the values of k_f (?10³M^?1s^?1) and k_d (?10^?3-10^?4 s^?1) were consistent with kinetic results expected for the substitution of Fe(CN)₅OH₂^3? with di- and trivalent ligands. Cyclic voltammetry of I exhibited two one-electron steps of oxidation corresponding to [III, L, II] + e → [II, L, II] and [III, L, III] + e → [III, L, II], respectively. The mixed valence binuclear complex II showed an intervalence band at 955 nm with a molar extinction coefficient 5.80 × 10² M^?1cm^?1 and a half-width 5100 cm^?l. The properties of the IT band conform to Hush's theory. Spectroscopic, electrochemical and kinetic results of II suggest that the mixed valence complex features a trapped - valence formulation with localized oxidation states of Fe(II) and Ru(III).     

Chelate von β-dicarbonylverbindungen und ihren derivaten—teil XLIV. Die extraktion von silber,gold, palladium und platin mit thiodibenzoylmethan1

The extraction of silver(I), gold(III), palladium(II) and platinum(IV) with thiodibenzoylmethane is reported, and methods for the extraction—photometric determination of silver and palladium in trace concentrations are described. Addition of EDTA allows a satisfactory selectivity to be achieved. The influence of foreign metals and complexing agents is discussed.