Rhenium(V) and technetium(V) complexes with phosphoraneimine and phosphoraneiminato ligands

Air-stable rhenium(V) nitrido complexes are formed when [ReOCl3(PPh3)2], [NBu4][ReOCl4], or [NBu4][ReNCl4] are treated with an excess of silylated phosphoraneiminates of the composition Me3SiNPPh3 or Ph2P(NSiMe3)CH2PPh2 in CH2Cl2. Complexes of the compositions [ReNCl(Ph2PCH2PPh2NH)2]Cl (1), [ReN(OSiMe3)(Ph2PCH2PPh2NH)2]Cl (2) or [ReNCl2(PPh3)2] (3) were isolated and structurally characterized. The latter compound was also produced during a reaction of the rhenium(III) precursor [ReCl3(PPh3)2(CH3CN)] and Me3SiNPPh3. Nitrogen transfer from the phosphorus to the rhenium atoms and the formation of nitrido ligands were observed in all examples. All products of reactions with an excess of the potentially chelating phosphoraneiminate Me3SiNP(Ph2)CH2PPh2 contain neutral Ph2PCH2PPh2NH ligands. The required protons are supplied by a metal-induced decomposition of the solvent dichloromethane. The Re-N(imine) bond lengths (2.055-2.110 A) indicate single bonds, whereas the N-P bond with lengths between 1.596 A and 1.611 A reflect considerable double bond character. An oxorhenium(V) phosphoraneiminato complex, the dimeric compound [ReOCl2(mu-N-Ph2PCH2PPh2N)]2 (4), is formed during the reaction of [NBu4][ReOCl4] with an equivalent amount of Ph2P(NSiMe3)CH2PPh in dry acetonitrile. The blue neutral complex with two bridging phosphoraneiminato units is stable as a solid and in dry solvents. It decomposes in solution, when traces of water are present. The rhenium-nitrogen distances of 2.028(3) and 2.082(3) A are in the typical range of bridging phosphoraneiminates and an almost symmetric bonding mode. Technetium complexes with phosphoraneimine ligands were isolated from reactions of [NBu4][TcOCl4] with Me3SiNPPh3, and [NBu4][TcNCl4] with Me3SiNP(Ph2)CH2PPh2. Nitrogen transfer and the formation of a five-coordinate nitrido species, [TcNCl2(HNPPh3)2] (5), was observed in the case of the oxo precursor, whereas reduction of the technetium(VI) starting material and the formation of the neutral technetium(V) complex [TcNCl2(Ph2PCH2PPh2NH)] (6) or [TcNCl(Ph2PCH2PPh2NH)2]Cl (7) was observed in the latter case. Both technetium complexes are air stable and X-ray structure determinations show bonding modes of the phosphoraneimines similar to those in the rhenium complexes.     

茂基钌化合物的合成与结构研究:双核钌氢合物的合成与晶体结构研究

三氢钌化物[(C~5H~5)Ru(PPh~3)H~3](1)经光解反应生成了一个双核钌氢化合物[(C~5H~5)Ru.(PPh~3)(μ-H)]~2(2).用X射线重原子法及Fourier迭代解出了2的晶体结构,其分子呈二聚形式,Ru-Ru键处在对称中心,两个钌原子间还通过两个桥氢原子相联,该二聚体的单体为16电子物种,与推测的碳氢键活化反应的中间体类似,为金属有机氢化物活化碳氢键的反应历程提供了证据.文中还给出了2的可能形成过程.     

Thermodynamic, kinetic, and mechanistic study of oxygen atom transfer from mesityl nitrile oxide to phosphines and to a terminal metal phosphido complex

The enthalpies of oxygen atom transfer (OAT) from mesityl nitrile oxide (MesCNO) to Me(3)P, Cy(3)P, Ph(3)P, and the complex (Ar[(t)Bu]N)(3)MoP (Ar = 3,5-C(6)H(3)Me(2)) have been measured by solution calorimetry yielding the following P-O bond dissociation enthalpy estimates in toluene solution (±3 kcal mol(-1)): Me(3)PO [138.5], Cy(3)PO [137.6], Ph(3)PO [132.2], (Ar[(t)Bu]N)(3)MoPO [108.9]. The data for (Ar[(t)Bu]N)(3)MoPO yield an estimate of 60.2 kcal mol(-1) for dissociation of PO from (Ar[(t)Bu]N)(3)MoPO. The mechanism of OAT from MesCNO to R(3)P and (Ar[(t)Bu]N)(3)MoP has been investigated by UV-vis and FTIR kinetic studies as well as computationally. Reactivity of R(3)P and (Ar[(t)Bu]N)(3)MoP with MesCNO is proposed to occur by nucleophilic attack by the lone pair of electrons on the phosphine or phosphide to the electrophilic C atom of MesCNO forming an adduct rather than direct attack at the terminal O. This mechanism is supported by computational studies. In addition, reaction of the N-heterocyclic carbene SIPr (SIPr = 1,3-bis(diisopropyl)phenylimidazolin-2-ylidene) with MesCNO results in formation of a stable adduct in which the lone pair of the carbene attacks the C atom of MesCNO. The crystal structure of the blue SIPr·MesCNO adduct is reported, and resembles one of the computed structures for attack of the lone pair of electrons of Me(3)P on the C atom of MesCNO. Furthermore, this adduct in which the electrophilic C atom of MesCNO is blocked by coordination to the NHC does not undergo OAT with R(3)P. However, it does undergo rapid OAT with coordinatively unsaturated metal complexes such as (Ar[(t)Bu]N)(3)V since these proceed by attack of the unblocked terminal O site of the SIPr·MesCNO adduct rather than at the blocked C site. OAT from MesCNO to pyridine, tetrahydrothiophene, and (Ar[(t)Bu]N)(3)MoN was found not to proceed in spite of thermochemical favorability.     

N- versus P-coordination in bis(amino)cyclodiphosph(III)azane complexes of aluminum

The reaction of the bis(amino)cyclodiphosph(III)azane, cis-{(tBuNH)(2)(PNtBu)(2)}, with AlMe(3), AlClMe(2), AlCl(2)Me, and AlCl(3) is reported. The less Lewis acidic compound AlMe(3) forms the adduct cis-[(tBuNH)(2)(PNtBu){P.(AlMe(3))NtBu}] (1), in which the aluminum atom is exclusively coordinated to one phosphorus atom. At elevated temperatures AlMe(3) undergoes migratory exchange between the two phosphorus atoms, but no methane elimination is observed. By using the more Lewis acidic compound AlClMe(2) the P-coordinated compound cis-[(tBuNH)(2)(PNtBu){P(AlClMe(2))NtBu}] (2) can be obtained at low temperatures. Compound 2 rearranges irreversibly to a product in which the AlClMe(2) group is coordinated by one exo-cyclic nitrogen atom. A concomitant 1,2-H shift from this nitrogen atom onto the phosphorus atom is observed. The N-coordinated rearrangement product slowly decomposes via a P-N bond cleavage in solution. Reaction of the even more Lewis acidic compounds AlCl(2)Me and AlCl(3) finally led to stable adducts, cis-[(tBuNH)(PNtBu)(tBuNAlCl(2)Me){P(H)NtBu}] (3), and cis-[(tBuNH)(PNtBu)(tBuNAlCl(3)){P(H)NtBu}] (4), in which the aluminum atoms are N-coordinated by a tBuN=PH unit.     

Solution calorimetric and stopped-flow kinetic studies of the reaction of *Cr(CO)3C5Me5 with PhSe-SePh and PhTe-TePh. Experimental and theoretical estimates of the Se-Se, Te-Te, H-Se, and H-Te bond strengths

The kinetics of the oxidative addition of PhSeSePh and PhTeTePh to the stable 17-electron complex *Cr(CO)3C5Me5 have been studied utilizing stopped-flow techniques. The rates of reaction are first-order in each reactant, and the enthalpy of activation decreases in going from Se (deltaH(double dagger) = 7.0 +/- 0.5 kcal/mol, deltaS(double dagger) = -22 +/- 3 eu) to Te (deltaH(double dagger) = 4.0 +/- 0.5 kcal/mol, deltaS(double dagger) = -26 +/- 3 eu). The kinetics of the oxidative addition of PhSeH and *Cr(CO)3C5Me5 show a change in mechanism in going from low (overall third-order) to high (overall second-order) temperatures. The enthalpies of the oxidative addition of PhE-EPh to *Cr(CO)3C5Me5 in toluene solution have been measured and found to be -29.6, -30.8, and -28.9 kcal/mol for S, Se, and Te, respectively. These data are combined with enthalpies of activation from kinetic studies to yield estimates for the solution-phase PhE-EPh bond strengths of 46, 41, and 33 kcal/mol for E = S, Se, and Te, respectively. The corresponding Cr-EPh bond strengths are 38, 36, and 31 kcal/mol. Two methods have been used to determine the enthalpy of hydrogenation of PhSeSePh in toluene on the basis of reactions of HSPh and HSePh with either *Cr(CO)3C5Me5 or 2-pyridine thione. These data lead to a thermochemical estimate of 72 kcal/mol for the PhSe-H bond strength in toluene solution, which is in good agreement with kinetic studies of H atom transfer from HSePh at higher temperatures. The reaction of H-Cr(CO)3C5Me5 with PhSe-SePh is accelerated by the addition of a Cr radical and occurs via a rapid radical chain reaction. In contrast, the reaction of PhTe-TePh and H-Cr(CO)3C5Me5 does not occur at any appreciable rate at room temperature, even in the presence of added Cr radicals. This is in keeping with a low PhTe-H bond strength blocking the chain and implies that H-TePh < or = 63 kcal/mol. Structural data are reported for PhSe-Cr(CO)3C5Me5 and PhS-Cr(CO)3C5Me5. The two isostructural complexes do not show signs of an increase in steric strain in terms of metal-ligand bonds or angles as the Cr-EPh bond is shortened in going from Se to S. Bond strength estimates of the PhE-H and PhE-EPh derived from density functional theory calculations are in reasonable agreement with experimental data for E = Se but not for E = Te. The nature of the singly occupied molecular orbital of the *EPh radicals is calculated to show increasing localization on the chalcogenide atom in going from S to Se to Te.     

Kinetics of the O + ICN reaction

The kinetics of the O + ICN reaction was studied using a relative rate method, with O + C(2)H(2) as the competing reaction. Carbon monoxide products formed in the competing reaction and subsequent secondary chemistry were detected as a function of reagent ICN pressure to obtain total rate constants for the O + ICN reaction. Analysis of the experimental data yields rate constants of k(1) = (3.7 ± 1.0 to 26.2 ± 4.0) × 10(-14) cm(3) molecule(-1) s(-1) over the total pressure range 1.5-9.5 Torr. Product channel NCO + I, the only bimolecular exothermic channel of the reaction, was investigated by detection of N(2)O in the presence of NO and found to be insignificant. An ab initio calculation of the potential energy surface (PES) of the reaction at the CCSD(T)/CEP-31G//DFT-B3LYP/CEP-31G level of theory was also performed. The pathways leading to bimolecular product channels are kinetically unfavorable. Formation and subsequent stabilization of an ICNO adduct species appears to dominate the reaction, in agreement with the experimentally observed pressure dependent rate constants.     

Well-defined imidotitanium alkyl cations: agostic interactions, migratory insertion vs.[2+2] cycloaddition, and the first structurally authenticated AlMe(3) adduct of any transition metal alkyl cation

The imidotitanium alkyl cations [Ti(NtBu)(Me3[9]aneN3)R]+ (R = Me (3+) or CH2SiMe3(4+)) possess either a very weak alpha-agostic or beta-Si-C agostic interactions, respectively, according to 13C and 29Si NMR and DFT studies; reaction of (4+) with iPrNCNiPr gives totally selective insertion into the Ti-alkyl bond; reaction of 3+ with AlMe3 gives the first structurally characterised AlMe3 adduct of a transition metal alkyl cation (Me3[9]aneN3 = 1,4,7-trimethyltriazacyclononane).     

膦、胂叶立德的化学与应用 XII. 对硝基苯基亚甲基三苯基膦、胂与2-全氟炔酸甲酯的反应以及(Z)3-全氟烷基 4-对硝基苯基-3-丁烯酸甲酯的立体专一性合成

溴化对硝基苄基三苯基 (1a)、 (1b)在碳酸钾存在下与2-全氟炔酸甲酯(2)在常温下反应, 生成加合物3(当M=As时)或3和4的混合物(当M=P时), 其中3的含量随反应温度升高而增加, 当反应温度为90℃时, 产物全部为3。4c加热时转化为3c。膦加合物3或4在甲醇-水中于封管内150℃加热, 发生P-C键断裂。两者都立体专一性地生成(Z)3-全氟烷基-4-对硝基苯基-3-丁烯酸甲酯(5)。胂加合物3在甲醇-水中回流, 发生As-C键断裂, 生成(Z)-5。对水解机理进行了研究。     

Synthesis and structural characterization of the first metal organic thallium antimonide

The first metal organic thallium antimonide, the heterocycle [Me2TlSb(SiMe3)2]3, was synthesized by reaction of [Me2AlSb(SiMe3)2]3 with the Lewis acid-base adduct dmap-TlMe3 (dmap = 4-dimethylaminopyridine). The analogous TlBi heterocycle [Me2TlBi(SiMe3)2]3 couldn't be isolated due to its limited thermal stability in solution.     

Migratory insertion of the R2P group into a nitrogen-nitrogen bond - a novel type of rearrangement in phosphorus-nitrogen ligand chemistry. 3. The rearrangement of triphosphinohydrazide ligand -N(PPh2)-N(PPh2)2 to triphosphazenide anion {[(Ph2P-N]2PPh2}- in the coordination sphere of divalent cobalt and nickel

Hydrazine dihydrochloride reacts with 3 equiv of Ph2PCl in tetrahydrofuran in the presence of triethylamine to give tris(diphenylphosphino)hydrazine (1) in 70% yield. Each nitrogen atom in 1 has a trigonal-planar environment according to X-ray analysis. Thermolysis of 1 at 130 degrees C results in the formation of two products: bis(diphenylphosphino)amine and octaphenylcyclotetraphosphazene. The interaction of free ligand 1 with NiBr2 affords a simple adduct [(Ph2P)2N-NH-PPh2]NiBr2, while its anionic (hydrazide) form undergoes rearrangement in a coordination sphere of divalent cobalt and nickel involving migratory insertion of the Ph2P group into a nitrogen-nitrogen bond. The reaction of 1 with cobalt bis(trimethylsilyl)amide, [(Me3Si)2N]2Co, yields the complex of phosphazenide-type (Me3Si)2N-Co[(Ph2PN)2PPh2] (2) in 86% yield. A similar reaction of 1 with nikelocene proceeds with substitution of one Cp ring to form durable 18-electron complex CpNi[(Ph2PN)2PPh2] (3).     

The first example of a monomeric alumatrane

The novel five-coordinate aluminum adduct Me(2)HN. AlL (2) [wherein L = tris(2-oxy-3,5-dimethylbenzyl)amine] containing three six-membered rings has been characterized by spectroscopic and by X-ray means. This adduct of an alumatrane is the first structurally characterized monomeric alumatrane derivative, and unlike its parent alumatrane [Al(OCH(2)CH(2))(3)N](x), 2 is monomeric in the gas, solution, and solid states. The X-ray molecular structure of 2 reveals a tricyclic cage moiety of C(3) symmetry. The aluminum geometry is a slightly distorted trigonal bipyramid in which, quite unexpectedly, the metal atom is located somewhat below the plane formed by three equatorial oxygens and its Al-N(tertiary) bond is shorter than that in Me(3)N.AlH(3).NMe(3) (Heitsch, C. W.; Nordman, C. E.; Parry, R. W. Inorg. Chem. 1963, 2, 508).     

1,1,3,3-Tetramethylguanidine-gallane, (Me2N)2CN(H).GaH3: an unusually strongly bound gallane adduct

The novel adduct 1,1,3,3-tetramethylguanidine-gallane, (Me2N)2CN(H).GaH3, has been prepared by the reaction of [(Me2N)2CNH2]+Cl- with LiGaH4 in Et2O solution. Its spectroscopic properties indicate a monomeric species with an unusually strong coordinate link between the imido function and GaH3, an inference confirmed by the crystal structure at 150 K which also reveals significant secondary interactions through non-classical N-H...H-Ga bridges. Despite the intrinsic strength of the Ga-N bond, however, vaporisation at ca. 310 K occurs with partial dissociation, and decomposition via more than one pathway proceeds at temperatures >330-350 K to give a variety of products, including the free base, Me2NH, H2, and a novel gallium-nitrogen compound composed of a Ga4N4 cubane-like core bridged on three edges by -N{C(NMe2)2}GaH2- units.     

异-α-姜黄烯及其衍生物的合成

姜科姜黄属是一个重要的药用植物群其根茎和块根分别称为姜黄和郁金。中医中药认为, 郁金具有行气, 纠瘀和通经等功效。动物药理试验表明, 姜科植物温郁金具有抗生育活性, 而其挥发油主要含有姜烯、α-姜黄烯和异-α-姜黄烯等倍半萜类化合物。本文合成了温郁金挥发油的另一个成分异-α-姜黄烯和其衍生物2-甲基-6-对甲苯基-2-庚醇、脱氢异-α-姜黄烯和2-甲基-6-对甲苯基-5-庚烯-2-醇。它们的化学结构得到确证。     

A germanium isocyanide complex featuring (n → π*) back-bonding and its conversion to a hydride/cyanide product via C-H bond activation under mild conditions

Reaction of the diarylgermylene Ge(Ar(Me(6)))(2) [Ar(Me(6)) = C(6)H(3)-2,6-(C(6)H(2)-2,4,6-(CH(3))(3))(2)] with tert-butyl isocyanide gave the Lewis adduct species (Ar(Me(6)))(2)GeCNBu(t), in which the isocyanide ligand displays a decreased C-N stretching frequency consistent with an n → π* back-bonding interaction. Density functional theory confirmed that the HOMO is a Ge-C bonding combination between the lone pair of electrons on the germanium atom and the C-N π* orbital of the isocyanide ligand. The complex undergoes facile C-H bond activation to produce a new diarylgermanium hydride/cyanide species and isobutene via heterolytic cleavage of the N-Bu(t) bond.     

醋酸乙烯酯基桥连铁硫配合物(σ,π-μ-CH3CO2C=CH2)(μ-RS)Fe2CO)6的制备及结构鉴定

本文报道乙酰氯同[μ-CO)(μ-RS)Fe2(CO]Et3NH相作用生成了标题化合物, 除用碳氢分析, IR, 'HNMR及X衍射技术表征这类配合物的结构和构象外, 还对形成此类产物的过程进行了初步讨论。     

CS2在Ag-S键中的插入反应的研究(PPh3)2 Ag(S2CSBu^t)

白色的[Bu^tSAg]nPPh3溶于CS2中, 析出桔黄色晶体. 经X射线单晶结构分析其结构为(PPh3)2Ag(S2CSBu^t). 发现了一个CS2在Ag-S键中的插入反应. 此反应为可逆反应, 晶体在120-130℃失去CS2. 晶体属三斜晶系, 空间群P1,a=10.571(1), b=13.638(3), c=14.391(3)A, α=88.75(2), β=72.84(1), γ=80.58(1)°, V=1954.9A^3, Dc=1.36g/cm^3, Dm=1.36g/cm^3, Z=2. 3572个衍射点参与修正, R=0.045, Rw=0.043, Ag原子以变形四面体与硫代黄原酸配体Bu^tS-CS2的两个S原子及两个PPh3的P原子配位. 插入反应形成的CS3基团基本上共面, 其C-S键长比CS2中的键长明显加长, 而比单键的C-S键长要短, 并在红外光谱上出现特征吸收峰.     

Transition metal-catalyzed dissociation of phosphine-gallane adducts: isolation of mechanistic model complexes and heterogeneous catalyst poisoning studies

Attempts to induce the catalytic dehydrocoupling of the phosphine-gallane adduct Cy2PH.GaH3 (Cy=cyclohexyl) (1) by treatment with ca. 5 mol% of either the Rh(I) complex [{Rh(mu-Cl)(1,5-cod)}2] (cod=cyclooctadiene) or the Rh(0) species Rh/Al2O3 and [Oct4N]Cl-stabilized colloidal Rh led to catalytic P-Ga bond cleavage to generate the phosphine, H2, and Ga metal. Interestingly, subsequent treatment of the reaction mixtures with Me2NH.BH3 failed to lead to the formation of [Me2N-BH2]2 via Rh-catalyzed dehydrocoupling, which suggested that catalyst deactivation was taking place. Poisoning studies involving the treatment of the active Rh(0) catalyst with Cy2PH, PMe3, or GaH3.OEt2 showed that deactivation indeed occurred as the dehydrocoupling of Me2NH.BH3 either dramatically decreased in rate or did not take place at all. The X-ray photoelectron spectroscopy analysis of colloidal Rh(0) that had been treated with Cy2PH and PMe3 confirmed the presence of phosphorus on the catalyst surface in each case, consistent with catalyst poisoning via phosphine ligation. A mechanism for the Rh-catalyzed P-Ga bond cleavage reaction of 1 and Me3P.GaH3 (2) is proposed and involves the initial reaction of Ga-H bonds with the Rh colloid surface, which weakens and ultimately breaks the P-Ga bond. The reasonable nature of this mechanism is supported by a model reaction between the zerovalent group 9 complex Co2(CO)8 and 2 which afforded Me3P.Ga[Co(CO)4]3 (3). Consistent with the elongated and thus weakened P-Ga bond in 3, solutions of this species in Et2O subsequently form the known complex [(Me3P)Co(CO)3]2 (4) and Ga metal after 4 h at 25 degrees C.     

Intra- and intermolecular N-H...F-C hydrogen-bonding interactions in amine adducts of tris(pentafluorophenyl)borane and -alane

The reaction between B(C(6)F(5))(3) and NH(3)(g) in light petroleum yielded the solvated adduct H(3)N.B(C(6)F(5))(3).NH(3). Treatment with a second equivalent of B(C(6)F(5))(3) afforded H(3)N.B(C(6)F(5))(3). Attempts to prepare the analogous alane adduct were unsuccessful and resulted in protolysis. Related compounds of the form R'R' 'N(H).M(C(6)F(5))(3) were synthesized from M(C(6)F(5))(3) and the corresponding primary and secondary amines (M = B, Al; R' = H, Me, CH(2)Ph; R' ' = Me, CH(2)Ph, CH(Me)(Ph); R'R' ' = cyclo-C(5)H(10)). The solid-state structures of 13 new compounds have been elucidated by single-crystal X-ray diffraction and are discussed. Each of the borane adducts has a significant bifurcated intramolecular hydrogen bond between an amino hydrogen and two o-fluorines, while N-H...F-C interactions in the alane adducts are weaker and more variable. (19)F NMR studies demonstrate that the borane adducts retain the bifurcated C-F...H...F-C hydrogen bond in solution. Compounds of the type R'R' 'N(H).M(C(6)F(5))(3) conform to Etter's rules for the prediction of hydrogen-bonding interactions.     

Rhodium(I)-catalyzed nucleophilic ring-opening reactions of oxabicyclo adducts derived from the [4 + 2]-cycloaddition of 2-imido-substituted furans

A series of 2-imido-substituted furans containing tethered unsaturation were prepared by the addition of the lithium carbamate of furan-2-ylcarbamic acid tert-butyl ester to a solution of the mixed anhydride of an appropriately substituted 3-butenoic acid. The initially formed imido furans undergo a rapid intramolecular [4 + 2]-cycloaddition at room temperature to deliver the Diels-Alder cycloadducts in good to excellent yield. Isolation of the highly labile oxabicyclic adduct is believed to be a consequence of the lower reaction temperatures employed as well as the presence of the extra carbonyl group, which diminishes the basicity of the nitrogen atom, thereby retarding the ring cleavage/rearrangement reaction generally encountered with related systems. By using a Rh(I)-catalyzed ring opening of the oxabicyclic adduct with various nucleophilic reagents, it was possible to prepare highly functionalized hexahydro-1H-indol-2(3H)-one derivatives in good yield. The major stereoisomer obtained possesses a cis-relationship between the nucleophile and hydroxyl group in the ring-opened product. The stereochemistry was unequivocally established by X-ray crystallographic analysis. Coordination of Rh(I) to the alkenyl pi-bond followed by a nitrogen-assisted cleavage of the carbon-oxygen bond occurs to furnish a pi-allyl rhodium(III) species. Addition of the nucleophile then occurs from the least hindered terminus of the resulting pi-allyl rhodium(III) complex. Proton exchange followed by rhodium(I) decomplexation ultimately leads to the cis-diastereomer.     

Pyridazine based scorpionate ligand in a copper boratrane compound

Reaction of potassium tris(mercapto-tert-butylpyridazinyl)borate K[Tn(tBu)] with copper(II) chloride in dichloromethane at room temperature led to the diamagnetic copper boratrane compound [Cu{B(Pn(tBu))(3)}Cl] (Pn = pyridazine-3-thionyl) (1) under activation of the B-H bond and formation of a Cu-B dative bond. In contrast to this, stirring of the same ligand with copper(I) chloride in tetrahydrofuran (THF) gave the dimeric compound [Cu{Tn(tBu)}](2) (2) where one copper atom is coordinated by two sulfur atoms and one hydrogen atom of one ligand and one sulfur of the other ligand. Hereby, no activation of the B-H bond occurred but a 3-center-2-electron B-H···Cu bond is formed. The reaction of copper(II) chloride with K[Tn(tBu)] in water gave the same product 2, but a formal reduction of the metal center from Cu(II) to Cu(I) occurred. When adding tricyclohexyl phosphine to the reaction mixture of K[Tn(R)] (R = tBu, Me) and copper(I) chloride in MeOH, the distorted tetrahedral Cu complexes [Cu{Tn(R)}(PCy(3))] (R = tBu 3, Me 4) were formed. Compound 4 is exhibiting an "inverted" κ(3)-H,S,S, coordination mode. The copper boratrane 1 was further investigated by density functional theory (DFT) calculations for a better understanding of the M→B interaction involving the d(8) electron configuration of Cu.