Pd(OAc)_2/HQ/FePc、Pd(OAc)_2/FePc 催化烯烃氧化合成酮的研究

考察了在乙腈酸性水溶液中Ｐｄ（ＯＡｃ）２／氢醌（ＨＱ）／酞青铁（ＦｅＰｃ）和Ｐｄ（ＯＡｃ）２／ＦｅＰｃ对环己烯、环戊烯、苯乙烯、正癸烯氧化合成相应酮的催化活性．实验结果表明，两类催化体系对环戊烯的酮基化均呈现出较高的催化活性，环戊酮收率可达９８％．在其它烯烃的氧化反应中，三元催化体系Ｐｄ（ＯＡｃ）２／ＨＱ／ＦｅＰｃ的催化活性高于二元的Ｐｄ（ＯＡｃ）２／ＦｅＰｃ．这表明，在Ｗａｃｋｅｒ类催化体系中，电子传递体的作用是很重要的．对催化体系中各组分的作用进行了讨论，并给出了可能的催化作用机理．     

The hydroformylation reaction: catalysis by platinum(II)-tin(II) systems

The complexes [Pt(ER₃)(CO)Cl₂] (E = P, As; R = aryl, alkyl) are active precursors for the catalytic hydroformylation of olefins in the presence of added tin(II) chloride. The yield of aldehyde may be maximized by systematic parameter variation and is shown to be limited by the degree of steric crowding at the metal centre. Terminal aliphatic monoenes are hydroformylated readily with a high n : iso ratio; hindered internal olefins, cyclic and conjugated aromatic olefins are less readily hydroformylated, but with no competing hydrogenation. The catalyst system is active under mild conditions of temperature and pressure.     

A further breakthrough in biphasic, rhodium-catalyzed hydroformylation: the use of Per(2,6-di-O-methyl)-β-cyclodextrin as inverse phase transfer catalyst

Solvent free biphasic hydroformylalion of various water-insoluble terminal olefins can be achieved in high yields and sclcctivitics by using a water-soluble rhodium/triphenylphosphine trisulfonate catalyst and per(2,6-di-o-mclhyl)-β-cyclodcxtrin as inverse phase transfer catalyst. The catalytic activities were up to ten times higher than those observed without pcr(2,6-di-o-methyl)-β-cyclodextrin.     

Oxidation of olefins and sulfides with different oxidants catalyzed by meso-tetra(n-propyl)porphyrinatomanganese(III) acetate: comparison with meso-tetra(phenyl)porphyrinatomanganese(III) acetate

In this study, the catalytic activity of meso-tetra(n-propyl)porphyrinatomanganese(III) acetate, MnT(n-pr)(OAc) in oxidation of olefins and sulfides with tetra-n-butylammonium Oxone (TBAO), tetra-n-butylammonium periodate (TBAP), aqueous hydrogen peroxide, sodium periodate and Oxone in the presence of imidazole (ImH) has been studied. The comparison of catalytic performance of MnT(n-pr)P(OAc) and MnTPP(OAc) in oxidation of olefins with TBAP shows that while the latter is four times more efficient than the former, the extent of oxidative degradation of the former is ca. 3.5 times greater than the latter. The use of excess amount of styrene resulted in only a ca. 10 % increase in the catalyst stability, suggesting a mainly intramolecular mechanism for the catalyst degradation. On the other hand, in the case of TBAO, the oxidative degradation of the former is four times greater than the latter, but the catalytic performance of the latter for the oxidation of cyclohexene was only ca. 2 times larger than the former. This observation shows that the decreased catalytic performance of MnT(n-pr)P(OAc) relative to MnTPP(OAc) is essentially due to the high degree of degradation of the former. Due to the high degree of catalyst degradation, oxidation of olefins with periodate and Oxone in the presence of the two manganese porphyrins in aqueous solution (or with hydrogen peroxide in dichloromethane) gave little or no product. Oxidation of sulfides with TBAO and TBAP in the presence of MnT(n-pr)P(OAc) showed a conversion of ca. 15 % for the catalytic oxidation of sulfides to sulfones.     

Factors affecting the catalytic epoxidation of olefins by iron porphyrin complexes and H2O2 in protic solvents

The catalytic epoxidation of cyclohexene by iron(III) porphyrin complexes and H2O2 has been investigated in alcohol solvents to understand factors affecting the catalyst activity in protic solvents. The yields of cyclohexene oxide and the Fe(III/II) reduction potentials of iron porphyrin complexes were significantly affected by the protic solvents, and there was a close correlation between the product yields and the reduction potentials of the iron porphyrin catalysts. The role of alcohol solvents was proposed to control the electronic nature of iron porphyrin complexes that determines the catalyst activity in the epoxidation of olefins by H2O2. We have also demonstrated that an electron-deficient iron porphyrin complex can catalyze the epoxidation of olefins by H2O2 under conditions of limiting substrate with high conversion efficiency in a solvent mixture of CH3OH and CH2Cl2.     

Ruthenium bis(bipyridine) sulfoxide complexes: new catalysts for alkene epoxidation

The ruthenium bis(bipyridine) sulfoxide complexes Ru-1 and Ru-2 exhibit high catalytic activity for epoxidation of unfunctionalized olefins in the presence of [bis(acetoxy)iodo]benzene; with the chiral catalyst, Ru-2, asymmetric induction up to 94% was observed for beta-methylstyrene.     

席夫碱Mo(VI)功能化介孔SiO2的制备及其催化烯烃环氧化研究

采用共缩聚法制备有机-无机杂化材料,以介孔SiO_2材料为载体,分别嫁接席夫碱配体和配位乙酰丙酮钼,得到Mo(VI)席夫碱修饰的介孔SiO_2(Mo-SB-Cl-SiO_2-0.5-1).所制备的材料采用XRD,SEM,N2吸附-脱附和TEM技术对其结构进行了表征.考察了Mo-SB-Cl-SiO_2-0.5-1催化液相烯烃环氧化性能,结果表明:Mo-SB-Cl-SiO_2-0.5-1催化剂对烯烃环氧化具有高的转化率和优良的催化活性.与后嫁接法制备的催化剂相比,Mo-SB-Cl-SiO_2-0.5-1催化剂催化活性得到明显提高,催化环己烯环氧化的转化率和选择性分别为85%和99%.在不同烯烃的研究中,环辛烯具有最高的转化率和选择性,分别为87%和99%.催化剂重复使用4次后,环己烯的转化率没有明显下降,选择性仍然高达98%,表明Mo-SB-Cl-SiO_2-0.5-1具有较好的催化稳定性.     

Synthesis and X‐ray structural characterization of a bidendate phosphine (dppe) palladium(II) complex and its application in Stille and Suzuki cross‐coupling reactions

The synthesis, characterization, crystal structure and catalyst activity of the bidentate phosphine complex [1,2‐bis(diphenylphosphino)ethane]palladium(II) bromide, [PdBr₂(dppe)], are presented. Treatment of 1,2‐bis(diphenylphosphino)ethane with palladium(II) bromide under mild conditions resulted in the compound in high yield and purity. The characterization of the synthesized compound was performed using spectroscopic methods, such as Fourier transform infrared and NMR, CHN analysis and X‐ray crystallography. The structure of the compound was slightly distorted square planar. This compound was found to work as an efficient catalyst for both Stille and Suzuki cross‐coupling reactions of various aryl halides with triphenyltin chloride and/or phenylboronic acid. Also, the catalyst could be recovered and reused several times without significant loss of its catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

分散型纳米二硫化钼的制备及其对模拟油浆的加氢处理催化性能

以二烷基二硫代氨基甲酸钼（Mo-DTC）和六羰基钼（Mo（CO）₆）为前驱体、水热法合成了分散型纳米MoS₂,采用X-ray射线衍射（XRD）、透射电子显微镜（TEM）、X射线光电子能谱分析（XPS）和程序升温脱附法（NH₃-TPD）等方法对其进行了表征。利用三种烯烃（辛烯、苯乙烯、反式二苯乙烯）、苯并噻吩和蒽等构建模拟油浆体系,结合气相色谱-质谱（GC-MS）分析,对分散型纳米MoS₂的模拟油浆加氢处理催化性能进行了研究。结果表明,不同预处理条件下制备出的催化活性样品均为2H-MoS₂,但各样品的结晶度、颗粒尺寸、硫化程度及其酸性质等均有所不同,其中,总酸量差别较小;以Mo-DTC和Mo（CO）₆为前驱体的优选硫化条件分别为380℃/30 min 和370℃/30 min,所得到的催化剂对烯烃和噻吩的加氢活性较高。其中,Mo-DTC基纳米MoS₂催化剂的烯烃加氢饱和转化率高达98.10%,加氢脱硫率为94.51%,而蒽的部分加氢饱和转化率则较低,为29.47%,且无八氢蒽（8HN）或全氢蒽的生成。Mo（CO）₆基纳米MoS₂催化剂的加氢效果则略差,烯烃加氢饱和转化率为94.01%,加氢脱硫率为89.01%,对蒽的加氢饱和转化率为24.20%,无8HN或全氢蒽的生成。总体而言,由Mo-DTC所制备的MoS₂催化剂具有烯烃高效饱和、含硫化合物高效脱硫、芳烃浅度加氢饱和的效果,且油浆加氢处理反应的选择性及催化稳定性均更高。     

gamma-1,2-H2SiV2W10O40] immobilized on surface-modified SiO2 as a heterogeneous catalyst for liquid-phase oxidation with H2O2

An organic-inorganic hybrid support has been synthesized by covalently anchoring an N-octyldihydroimidazolium cation fragment onto SiO2 (denoted as 1-SiO2). This modified support was characterized by solid-state 13C, 29Si, and 31P NMR spectroscopy, IR spectroscopy, and elemental analysis. The results showed that the structure of the dihydroimidazolium skeleton is preserved on the surface of SiO2. The modified support can act as a good anion exchanger, which allows the catalytically active polyoxometalate anion [gamma-1,2-H2SiV2W10O40]4- (I) to be immobilized onto the support by a stoichiometric anion exchange (denoted as I/1-SiO2). The structure of anion I is preserved after the anion exchange, as confirmed by IR and 51V NMR spectroscopy. The catalytic performance for the oxidation of olefins and sulfides, with hydrogen peroxide (only one equivalent with respect to substrate) as the sole oxidant, was investigated with I/1-SiO2. This supported catalyst shows a high stereospecificity, diastereoselectivity, regioselectivity, and a high efficiency of hydrogen peroxide utilization for the oxidation of various olefins and sulfides without any loss of the intrinsic catalytic nature of the corresponding homogeneous analogue of I (i.e., the tetra-n-butylammonium salt of I, TBA-I), although the rates decreased to about half that with TBA-I. The oxidation can be stopped immediately by removal of the solid catalyst, and vanadium and tungsten species can hardly be found in the filtrate after removal of the catalyst. These results rule out any contribution to the observed catalysis from vanadium and tungsten species that leach into the reaction solution, which means that the observed catalysis is truly heterogeneous in nature. In addition, the catalyst is reusable for both epoxidation and sulfoxidation without any loss of catalytic performance.     

Substitution and elimination reactions of poly(epichlorohydrin) and poly(2-chloroethyl vinyl ether) using phase transfer catalysis

The reactions of poly(epichlorohydrin) (PECH) and poly(2-chloroethyl vinyl ether) (PCEVE) with various reagents were investigated using phase transfer catalyst (PTC) such as tetra-n-butylammonium bromide (TBAB), 18-crown-6 (CR6), and dicyclohexyl-18-crown-6 (DCHC) is a solid—liquid two-phase system. Although the reactions of these polymers hardly occurred without PTC in nonpolar solvents such as toluene and diglyme under mild conditions, the addition of PTC caused the reactions to proceed smoothly under the same conditions. In addition, the reactions of PECH and PCEVE with a strong base such as potassium hydroxide proceeded selectively through β-elimination reaction to produce the polymers with pendant vinyl groups. These results suggested this method is useful for the syntheses of functional polymers. On the other hand, it turned out that quaternary ammonium salts such as TBAB have higher catalytic activity than crown ethers such as CRG and DCHE in these reactions. Furthermore, the catalytic activity of quaternary ammonium salts was strongly influenced by their chain length and the structure of the polymers.     

Dawson结构杂多酸盐催化合成碳酸丙烯酯

碳酸丙烯酯(PC)是一种性能优良的高沸点、高极性的有机溶剂,在有机合成、化妆品、电池电解质和脱碳溶剂等领域中具有重要应用.     

Terminal and Internal Olefin Epoxidation with Cobalt(II) as the Catalyst: Evidence for an Active Oxidant Co(II)-Acylperoxo Species

A simple catalytic system that uses commercially available cobalt(II) perchlorate as the catalyst and 3-chloroperoxybenzoic acid as the oxidant was found to be very effective in the epoxidation of a variety of olefins with high product selectivity under mild experimental conditions. More challenging targets such as terminal aliphatic olefins were also efficiently and selectively oxidized to the corresponding epoxides. This catalytic system features a nearly nonradical-type and highly stereospecific epoxidation of aliphatic olefin, fast conversion, and high yields. Olefin epoxidation by this catalytic system is proposed to involve a new reactive Co(II)-OOC(O)R species, based on evidence from H(2)(18)O-exchange experiments, the use of peroxyphenylacetic acid as a mechanistic probe, reactivity and Hammett studies, EPR, and ESI-mass spectrometric investigation. However, the O-O bond of a Co(II)-acylperoxo intermediate (Co(II)-OOC(O)R) was found to be cleaved both heterolytically and homolytically if there is no substrate.     

Highly stereoselective Ru(II)-Pheox catalyzed asymmetric cyclopropanation of terminal olefins with succinimidyl diazoacetate

The Ru(II)-Pheox complex is an efficient catalyst for the intermolecular cyclopropanation of various terminal olefins with succinimidyl diazoacetate. This catalytic system can perform under mild conditions, and the desired cyclopropane products are obtained in high yields with excellent diastereoselectivity and enantioselectivity.     

Mg–Al layered double hydroxide intercalated with manganese(III) 5,10,15,20‐tetrakis(4‐benzoate)porphyrinacetate as a highly reusable catalyst for epoxidation

The preparation and characterization are presented of a new catalytic material comprising Mg–Al layered double hydroxide and intercalated manganese(III) 5,10,15,20‐tetrakis(4‐benzoate)porphyrinacetate. Characterization was realized via various techniques. The prepared composite exhibited excellent catalytic activity in the selective epoxidation of various olefins with tetra‐n‐butylammonium hydrogen monopersulfate as an oxidant under mild reaction conditions. Furthermore, the catalytic system could be reused nine times without significant reduction in conversion percentage and any special care or additional treatment of the catalyst.     

一种新型双亚胺吡啶铁系催化剂的乙烯低聚研究

线性α 烯烃广泛地应用于洗涤剂、增塑剂、润滑油等精细化学品的合成以及作为共单体制备线性低密度聚乙烯 (ＬＬＤＰＥ) .目前工业上主要是应用ＳＨＯＰ法[1] 、Ｃｈｅｖｒｏｎ工艺和Ａｍｏｃｏ工艺[2 ] 通过乙烯低聚制备 .近些年发展起来的新型高活性后过渡金属乙烯低聚催化剂能够高选择性地制备线性α 烯烃[3 ,4] .Ｂｒｏｏｋｈａｒｔ等[4] 的研究表明 ,对于双亚胺吡啶铁系乙烯聚合催化剂而言 ,配体上苯基的邻位取代基位阻减小可以实现乙烯低聚 ,并具有高活性、高选择性以及理想的低聚产物分布 .本文的工作是从配体的空间位阻效应对催化剂…     

Organic Ligand‐Free Hydroformylation with Rh Particles as Catalyst†

Summary of main observation and conclusion An efficient and organic ligand-free heterogeneous catalytic system for hydroformylation of olefins is highly desirable for both academy and industry.In this study,simple Rh black was employed as a heterogeneous catalyst for hydroformylation of olefins in the absence of organic ligand.The Rh black catalyst showed good catalytic activity for a broad substrate scope including the aliphatic and aromatic olefins,affording the desired aldehydes in good yields.Taking the hydroformylation of ethylene as an example,86%yield of propanal and TOF of 200 h-1 were obtained,which was superior to the reported homogeneous catalytic systems.In addition,the catalyst could be reused five times without loss of activity under identical reaction conditions,and the Rh leaching was negligible after each cycle.     

Nanoscaled Copper Metal–Organic Framework (MOF) Based on Carboxylate Ligands as an Efficient Heterogeneous Catalyst for Aerobic Epoxidation of Olefins and Oxidation of Benzylic and Allylic Alcohols

Aerobic epoxidation of olefins at a mild reaction temperature has been carried out by using nanomorphology of [Cu₃(BTC)₂] (BTC=1,3,5‐benzenetricarboxylate) as a high‐performance catalyst through a simple synthetic strategy. An aromatic carboxylate ligand was employed to furnish a heterogeneous copper catalyst and also serves as the ligand for enhanced catalytic activities in the catalytic reaction. The utilization of a copper metal–organic framework catalyst was further extended to the aerobic oxidation of aromatic alcohols. The shape and size selectivity of the catalyst in olefin epoxidation and alcohol oxidation was investigated. Furthermore, the as‐synthesized copper catalyst can be easily recovered and reused several times without leaching of active species or significant loss of activity.     

膦配体修饰的Rh／SiO2用于3-戊烯酸甲酯氢甲酰化反应

制备了膦配体修饰的Rh/SiO2多相催化剂(L-Rh/SiO2),该催化剂在内烯烃氢甲酰化制备正构醛反应中表现出了高活性和高区域选择性,而且在高压釜反应器中可以通过简单的过滤与产物分离.通过使用不同的单齿和螯合双齿膦配体考察了配体的电子及空间效应对L-Rh/SiO2催化剂催化性能的影响。     

Pd（OAc）2／FePc催化环己烯氧化合成环己酮的研究

考察了几种Ｆｅ－大环配合物与Ｐｄ（ＯＡｃ）２组成的双组分催化体系，在乙腈酸性水溶液中环己烯经合成环己酮的催化活性，实验结果表明，其中以酞菁失（ＦｅＰｃ）与Ｐｄ（ＯＡｃ）２组成的催化体系活性最高，而ＦｅＴＰＰＣｌ与Ｐｄ（ＯＡｃ）２催化体系，虽然催化活性较高，但催化剂的稳定性较低，各种因素对Ｐｄ（ＯＡｃ）２／ＦｅＰｃ催化活催化影响的研究结果指出，在无水和酸存在的非水溶液中，Ｐｄ（ＯＡｃ）２／ＦｅＰｃ对