Synthesis and characterization of thiosemicarbazone derivatives of 2-chloro-4-hydroxy-benzaldehyde and their rhenium(I) complexes

N-Thioamide thiosemicarbazone derived of 2-chloro-4-hydroxy-benzaldehyde (R = H, HL¹; R = Me, HL² and R = Ph, HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in chloroform gave the adducts [ReX(CO)₃(HL)] (1a X = Cl, R = H; 1a′ X = Br, R = H; 1b X = Cl, R = CH₃; 1b′ X = Br, R = CH₃; 1c X = Cl, R = Ph; 1c′ X = Br, R = Ph) in good yield. Complexes 1a′ and 1b’ were also obtained by the reaction of HL¹ and HL³ with [ReBr(CO)₅] in toluene.All the compounds have been characterized by elemental analysis, mass spectrometry (FAB), IR and ¹H NMR spectroscopic methods. Moreover, the structures of HL², HL³ and 1a·H₂O were also established by X-ray diffraction. In 1a, the rhenium atom is coordinated by the sulphur and the azomethine nitrogen atoms, forming a five-membered chelate ring, as well as three carbonyl carbon and chloride atoms. The resulting coordination polyhedron can be described as a distorted octahedron.The study of the crystals obtained by slow evaporation of methanol and DMSO solutions of the adducts 1a′ and 1b, respectively, showed the formation of dimer structures based on rhenium(I) thiosemicarbazonates [Re₂(L¹)₂(CO)₆]·3H₂O (2a)·3H₂O and [Re₂(L²)₂(CO)₆]·(CH₃)₂SO (2b)·2(CH₃)₂SO. Amounts of these thiosemicarbazonate complexes [Re₂(L)₂(CO)₆] (2) were obtained by reaction of the corresponding free ligands with [ReCl(CO)₅] in dry toluene.In 2a·3H₂O and 2b·2(CH₃)₂SO the dimer structures are established by Re–S–Re bridges, where S is the thiolate sulphur from a N,S-bidentate thiosemicarbazonate ligand. In both structures the rhenium coordination sphere is similar; the dimers are in the same diamond Re₂S₂ face.     

Structural organization and thermal behavior of the heteropolynuclear complex [Au2{S2CN(CH3)2}4][ZnCl4] and the heterovalent complex ([Au{S2CN(CH3)2}2][AuCl2]) n obtained in the chemisorption system [Zn2{S2CN(CH3)2}4]-Au3+/2 M HCl

Reactions of freshly precipitated binuclear zinc dimethyldithiocarbamate with [AuCl₄]^? anions in 2 M HCl were studied. The heteropolynuclear complex [Au₂{S₂CN(CH₃)₂}₄][ZnCl₄] (I) and the polymeric heterovalent complex ([Au{S₂CN(CH₃)₂}₂][AuCl₂]) _n (II) were preparatively isolated from the chemisorption system [Zn₂{S₂CN(CH₃)₂}₄]-Au³⁺/2 M HCl. The products were characterized by ¹³C MAS NMR data and by X-ray diffraction determination of crystal and molecular structures. The principal structural units of compounds I and II are the tetragonal planar complex cations [Au{S₂CN(CH₃)₂}₂]⁺ (in which the complex-forming ion coordinates two MDtc ligands in the S,S′-bidentate mode) and the anions, namely, the distorted tetrahedral anion [ZnCl₄]^2? in I and the linear [AuCl₂]^? anion in II. The further structural self-organization of complexes at the supramoleular level occurs through relatively weak secondary bonds Au?S and Au?Cl. The chemisorption capacities of zinc dimethyldithiocarbamate calculated from gold(III)-binding reactions are 644.1 and 1288.2 mg of gold per gram of the sorbent. Simultaneous thermal analysis studies of the thermal behavior of I and II were used to elucidate the conditions of gold recovery.     

Tellurium-chlorine secondary interactions in palladium(II) complex of MeOC6H4TeCH2CH2NHCH(CH3)C6H4-2-OH resulting in self-assembled bimolecular aggregates with short palladium-palladium distances

A non-Schiff base (Te, N, O) ligand MeOC₆ H₄TeCH₂CH₂NHCH(CH₃)C₆H₄–2–OH (LH) having a chiral center and its palladium(II) complex [PdClL]·CH₂Cl₂ (1) have been synthesized. Both have characteristic ¹H and ¹³C NMR spectra. The single crystal structure of the complex 1 has been determined by X-ray diffraction methods. The monoclinic crystals of 1 (space group P2₁/n) have a=14.581(5) Å, b=13.160(5) Å and c=20.249(5) Å, β=99.398(5)°. The Te $\cdots A non-Schiff base (Te, N, O) ligand MeOC₆ H₄TeCH₂CH₂NHCH(CH₃)C₆H₄–2–OH (LH) having a chiral center and its palladium(II) complex [PdClL]·CH₂Cl₂ (1) have been synthesized. Both have characteristic ¹H and ¹³C NMR spectra. The single crystal structure of the complex 1 has been determined by X-ray diffraction methods. The monoclinic crystals of 1 (space group P2₁/n) have a=14.581(5) ?, b=13.160(5) ? and c=20.249(5) ?, β=99.398(5)°. The TeCl secondary interactions [3.303(2)–3.352(2) ?] between two nearly square planar palladium complex molecules results in a bimolecular aggregate having a PdPd distance 3.203(1) ?. The Pd–Te, Pd–N and Pd–O bond lengths are 2.5005(7)/2.4914(7), 2.060(4)/2.061(4) and 2.054(3)/2.044(3) ?, respectively.     

Adduct formation of cadmium(II) N,N-cyclo-hexamethylenedithiocarbamate, [Cd2{S2CN(CH2)6}4], with morpholine: Synthesis, molecular structure, and thermal behavior of a crystalline adduct cis-[Cd{NH(CH2)4O}2{S2CN(CH2)6}2]

The reaction of [Cd₂{S₂CN(CH₂)₆}₄] (I) with morpholine gives a crystalline adduct of cadmium N,N-cyclo-hexamethylenedithiocarbamate [Cd{NH(CH₂)₄O}₂{S₂CN(CH₂)₆}₂] (II), whose coordination sphere includes two molecules of the donor base. The structural organization and thermal behavior of II is studied by X-ray diffraction analysis and simultaneous thermal analysis in comparison with the original binuclear cadmium complex I. The central cadmium atom (coordination number 6) coordinates two morpholine molecules and two structurally equivalent S,S’-anisobidentate ligands HmDtc to form a chromophore [CdN₂S₄] with the structure of a distorted octahedron. The thermal destruction of II proceeds in two stages and includes consecutive steps of dissociation of the Cd-N bonds followed by the desorption of morpholine and thermolysis of the dithiocarbamate moiety of the adduct to form CdS as the final product. The structure of binuclear [Cd₂{S₂CN(CH₂)₆}₄] is refined for a correct refinement of the geometric characteristics of compounds I and II.     

Synthesis and characterization of a novel three-dimensional open-framework: Metal diphosphonate,Zn[HO3PCH2(C6H4)CH2PO3H]

A novel zinc diphosphonate, Zn[HO₃PCH₂(C₆H₄)CH₂PO₃H] (1) was synthesized from tetraethyl para-xylylenediphosphonate, Et₂O₃PCH₂C₆H₄CH₂PO₃Et₂, and Zn (AcO)₂·2H₂O under solvothermal conditions. The structure of compound 1 was determined by single-crystal X-ray diffraction, which reveals that the structure crystallizes in the monoclinic space group C2/c (No. 15), with a = 22.4844(19) Å, b = 6.4361(5) Å, c = 8.1194(7) Å, β = 102.595(2)°, V = 1146.70(16) Å³, T = 298(2) K, Z = 8. The novel three-dimensional (3D) construction is simply built up from linear inorganic chains of corner-sharing four-rings of tetrahedral [ZnO₄] and [PO₃C] which connected adjacent chains by the organophosphorus ligand para-xylylenediphosphonate. The framework has 10 Å × 4 Å (containing the van der Waals radii of atoms) channels running along the b-axis.     

Supramolecular aspects of iron(II) crown-dipyridyl spin-crossover compounds

The synthesis, structures and magnetism of the complexes [Fe^II(3-bpp)₂][bpmdcK](SeCN)_1.7(ClO₄)_1.3·MeOH·H₂O (1), [Fe^II(3-bpp)₂]₄[bpmdcH₂(H₂O)₂](ClO₄)₁₀·7H₂O·3MeOH (2) and cis-[Fe^II₂(NCSe)₂((3,5-Me₂pz)₃CH)₂(μ-bpmdc)]·2MeCN (3) (where 3-bpp = 2,6-di(pyrazole-3yl)pyridine, bpmdc = N,N′-bis(4-pyridyl-methyl)diaza-18-crown-6) and (3,5-Me₂pz)₃CH = tris(3,5-dimethylpyrazole)methane, are presented. These compounds form a study of the supramolecular influence of host–guest/crown-ether interactions and cation-to-crown hydrogen-bonding effects upon d⁶ spin transitions, the latter occurring above, or near to, room temperature in 1 and 2. Desolvation effects also influence the T_1/2 values. The dinuclear compound 3 contains covalent pyridyl (crown) N to Fe bridge bonding and remains high spin.     

Ionic crystals based on Keggin anion and mixed-valent diruthenium tetracetate: [Ru2(CH3COO)4(H2O)2]2[HnXW12O40]·[Ru2(CH3COO)4(H2O)Cl]·12H2O (X = B,Si, Ge)

Three new ionic crystals based on Keggin anion and mixed-valent diruthenium tetracetate, [Ru₂(CH₃CO₂)₄(H₂O)₂]₂[H_nXW₁₂O₄₀]·[Ru₂(CH₃CO₂)₄(H₂O)Cl]·12H₂O {X = B, n = 3 (1); X = Si, n = 2 (2); X = Ge, n = 2 (3)}, have been prepared in acidic aqueous solution at about pH 3.0 by reaction of K₄BW₁₂O₄₀·mH₂O, K₈SiW₁₁O₃₉·mH₂O and K₈GeW₁₁O₃₉·mH₂O with diruthenium tetracetate Ru₂(CH₃COO)₄Cl, respectively, and their structures were determined by X-Ray diffraction analysis. They are isostructural structure with the ratio of heteropolytungstate anion, Ru₂(CH₃CO₂)₄⁺ cation and neutral molecular Ru₂(CH₃CO₂)₄Cl of 1:2:1. The cyclic voltammetry in 0.5 M KNO₃ aqueous solution at pH 3.0 show the respective electrochemical behaviors of the W-centers and Ru₂-centers for these three complexes. Magnetic data analysis shows that diruthenium units display the ground state electronic configuration π*²δ* with large positive D value.     

Crystal structure and optical properties of new 0D-hybrid hydroxyfluorotitanates

New 0D hybrid organic–inorganic hydroxyfluorotitanates result from the microwave assisted reactions in autoclaves of TiF₄ with organic amines (3-5 diamino-1,2,4,triazol (guaz), ethylenediamine (en) and diethylenetriamine (dien)) and concentrated aqueous HF in ethanol at 190 °C for 1 h. Four compounds, [Hguaz]₂·(TiF_4.9(OH)_1.1) (I), [H₂guaz]·(TiF_4.8(OH)_1.2) (II), [H₂en]·(TiF_4.3(OH)_1.7) (III) and [H₂dien]·(Ti(F,OH)₆)·2H₂O (IV) are prepared and characterized. All structures are built up from isolated (Ti(F,OH)₆)²⁻ anions interacting with mono- or di-protonated amines which local symmetry dictates the long range stacking of the Ti(F,OH)₆ octahedra. Insertion of crystallized water molecules is only observed for IV. The experimental optical gaps of I, II and III have been measured at about 3.4 eV and compare well with the theoretical values estimated from the examination of density of state diagrams. The optical thresholds are mainly due to O(2p) → Ti(3d) electronic transitions, the F(2p) → Ti(3d) charge transfers occurring at higher energy.     

Two polymorphs of a tetramethylammonium zincophosphate with diamond net-related frameworks containing [H3O4(P)4] hydroxyl nests: solution-mediated and mechanochemical phase transformations and crystal structures

The formation and crystal structures of two polymorphs of the tetramethylammonium zincophosphate (ZnPO) (NMe₄)[ZnP₂O₈H₃] have been reinvestigated. Methods employed were single-crystal and powder X-ray diffraction, thermogravimetic and difference thermal analysis and ¹³C and ³¹P solid state NMR spectroscopy. The following new findings are reported: The polymorphs formulated as (NMe₄)[Zn(HPO₄)(H₂PO₄)] (I) and (NMe₄)[Zn(H_1.5PO₄)₂] (II) crystallize from clear solutions near room temperature. A solution-mediated reversible phase transformation readily occurs with I and II being the thermodynamical stable phase at room temperature and 50 °C, respectively. In the solid state these transformations are very sluggish. Solid I can be mechanochemically transformed into II (grinding at room temperature for ca. 30 min). Both polymorphs possess interrupted 3D open-framework structures that are closely related to the diamond net and contain different kinds of distorted tetrahedral [H₃O₄(P)₄] groupings (hydroxyl nests). Formal substitution of the three protons in each hydroxyl nest by a trivalent cation results in fully four-connected frameworks with a novel topology (in the case of I) and the gismondine topology (II). ZnPO and cobalt(II) phosphate (CoPO) materials with framework structures that contain [H_xO₄(P)₄] hydroxyl nests (x=3 or 4) and/or being related to the diamond net are briefly surveyed.     

Mn4 single-molecule magnets with a planar diamond core and S=9

The syntheses and magnetic properties are reported for three Mn₄ single-molecule magnets (SMMs): [Mn₄(hmp)₆(NO₃)₂(MeCN)₂](ClO₄)₂·2MeCN (3), [Mn₄(hmp)₆(NO₃)₄]·(MeCN) (4), and [Mn₄(hmp)₄(acac)₂(MeO)₂](ClO₄)₂·2MeOH (5). In each complex there is a planar diamond core of Mn^III ₂Mn^II ₂ ions. An analysis of the variable-temperature and variable-field magnetization data indicate that all three molecules have intramolecular ferromagnetic coupling and a S=9 ground state. The presence of a frequency-dependent alternating current susceptibility signal indicates a significant energy barrier between the spin-up and spin-down states for each of these three Mn^III ₂Mn^II ₂ complexes. The fact that these complexes are SMMs has been confirmed by the observation of hysteresis in the plot of magnetization versus magnetic field measured for single crystals of complexes 3 and 4. The hysteresis loops for both of these complexes exhibit steps characteristic of quantum tunneling of magnetization. Complex 4 shows its first step at zero field, whereas the first step for complex 3 is shifted to −0.10 T. This shift is attributable to weak intermolecular antiferromagnetic exchange interactions present for complex 3.     

Chelate structures of 5-(H/Br)-2-hydroxybenzaldehyde-4-allyl-thiosemicarbazones (H2L): Synthesis and structural characterizations of [Ni(L)(PPh3)] and [Ru(HL)2(PPh3)2]

The reactions of 5-R-2-hydroxybenzaldehyde-4-allyl-thiosemicarbazone {R: H (L¹); Br (L²)} with [M^II(PPh₃)nCl₂] (M = Ni, n = 2 and M = Ru, n = 3) in a 1:1 molar ratio have given stable solid complexes corresponding to the general formula [Ni(L)(PPh₃)] and [Ru(HL)₂(PPh₃)₂]. While the 1:1 nickel complexes are formed from an ONS donor set of the thiosemicarbazone and the P atom of triphenylphosphine in a square planar structure, the 1:2 ruthenium complexes consist of a couple from each of N, S and P donor atoms in a distorted octahedral geometry. These mixed-ligand complexes have been characterized by elemental analysis, IR, UV–Vis, APCI-MS, ¹H and ³¹P NMR spectroscopies. The structures of [Ni(L²)(PPh₃)] (II) and [Ru(L¹H)₂(PPh₃)₂] (III) were determined by single crystal X-ray diffraction.     

A new family of magnetic 2D coordination polymers based on [MV(CN)8]3− (M=Mo,W) and pre-programmed Cu2+ centres

The self-assembly of [M(CN)₈]³⁻ (M=Mo, W) anion and polyamine complexes of Cu^II[Cu(tetren)]²⁺ and [Cu(dien)(H₂O)₂]²⁺ (tetren=tetraethylenepentamine, dien=diethylenetriamine) in acidic aqueous solution gives (tetrenH₅)_0.8{Cu^II ₄[W^V(CN)₈]₄}·7.2H₂O 1, (tetrenH₅)_0.8{Cu^II ₄[Mo^V(CN)₈]₄}·7.2H₂O 2, (dienH₃){Cu^II ₃[W^V(CN)₈]₃}·4H₂O 3 and (dienH₃){Cu^II ₃[Mo^V(CN)₈]₃}·4H₂O 4 2D coordination polymers. All compounds are structure-related: the crystal structures of isomorphous 1–2 and 3–4, respectively, consist of double-layered cyano-bridged {Cu^II[W^V(CN)₈]⁻}_n square grid backbones and non-coordinated fully protonated polyamine countercations as well as H₂O molecules located between the sheets. The magnetic measurements reveal long range ferromagnetic ordering with sharp phase transitions at T_C in range 28–37 K and coercivity in range 30–225 Oe at liquid helium temperature, T=4.3 K.     

Synthesis and characterization of a new organically templated open-framework beryllium phosphite with 3, 4-connected networks

Employing diethylenetriamine (=dien) as a structure-directing agent, a new open-framework beryllium phosphite H₂dien·Be₃(HPO₃)₄ (1), has been synthesized hydrothermally and structurally characterized by single crystal X-ray diffraction. The structure of 1 features a (3, 4)-connected framework with 8- and 12-ring channels, which is constructed from strictly alternating BeO₄ tetrahedra and HPO₃²⁻ pseudopyramids. The 3-D framework possesses a pcu topology when the heptameric [Be₃(HPO₃)₄] clusters are regarded as 6-connected secondary building units. Crystal data: 1, monoclinic, C2/c (no. 15), a = 8.7350(3) Å, b = 15.1704(6) Å, c = 13.0851(4) Å, β = 101.223(5)°, V = 1700.79(10) Å³, Z = 4, R₁ = 0.0625, wR₂ = 0.1692.     

Isomerism in tetrahedral rhenium cluster complexes [Re4Q4(PMe2Ph)4X8]·nCH2Cl2 (Q = Se, X = Br; Q = Te, X = Cl, Br)

Three new tetrahedral rhenium cluster compounds [Re₄Se₄(PMe₂Ph)₄Br₈]·1.5CH₂Cl₂ (1), [Re₄Te₄(PMe₂Ph)₄Br₈]·CH₂Cl₂ (2), and [Re₄Te₄(PMe₂Ph)₄Cl₈]·CH₂Cl₂ (3) have been synthesized by the reaction of the corresponding precursor chalcohalide complexes [Re₄Q₄(TeX₂)₄X₈] (X = Br, Q = Se (for 1), Te (for 2); X = Cl, Q = Te (for 3)) with dimethylphenylphosphine in CH₂Cl₂. All compounds have been characterized by X-ray single-crystal diffraction and elemental analyses, IR and ³¹P NMR spectroscopy. ³¹P NMR spectroscopy indicates the formation of isomers in solution, confirmed by single-crystal X-ray analysis.     

Synthesis of molecular magnetics based on cobalt trisoxalate. Structural and magnetic properties of NBun 4[MnIICoIII(C2O4)3]

Bimetallic oxalate-bridged complexes Q[M^IICo(C₂O₄)₃] (Q=Me₄N⁺, Buⁿ ₄P⁺; M^II=Mn, Co, Ni, Cu, Zn) were synthesized. Single crystals of [NBuⁿ ₄][Mn^IICo^III(C₂O₄)₃] were studied by XRD. Unit cell parametersa=b=9.242(3) Å,c=54.524(13) Å; space groupR3c. Magnetic measurements indicate the absence of a magnetic phase transition up to the temperature of liquid helium. The XRD data confirm the presence of Co^III ions with a low-spin configuration in the crystal.     

Synthesis,characterization and crystal structures of 2-[(E)-2-(4-hydroxy-3,5-dimethylphenyl)-1-diazenyl]benzoic acid and its polymeric and monomeric triorganotin(IV) complexes

Three triorganotin(IV) complexes of composition R₃SnLH (R = Me, Bu and Ph and LH = 2-[(E)-2-(4-hydroxy-3,5-dimethylphenyl)-1-diazenyl]benzoate) have been synthesized and characterized by ¹H, ¹³C, ¹¹⁹Sn NMR, and IR spectroscopic techniques in combination with elemental analysis. The crystal structures of the carboxylate ligand HO₂CC₆H₄{NN(C₆H₂-4-OH-3,5-(CH₃)₂)}-o in its neutral form and three triorganotin(IV) complexes, viz., polymeric (R₃Sn[O₂CC₆H₄{N–N(H)(C₆H₂-4-O-3,5-(CH₃)₂)}-o])_n (R = Me (1) and Bu (2)) and monomeric Ph₃Sn[O₂CC₆H₄{N–N(H)(C₆H₂-4-O-3,5-(CH₃)₂)}-o] (3) complexes are reported. The polymeric complexes 1 and 2 exist as extended chains in which the LH-bridged Sn-atoms adopt a trans-R₃SnO₂ trigonal bipyramidal configuration with R groups in the equatorial positions and the axial sites occupied by an oxygen atom from the carboxylate ligand and the phenoxide O atom of the next carboxylate ligand. The Sn atom in complex 3 has a distorted tetrahedral geometry. In all three complexes, the carboxylate ligand is in the zwitterionic form with the phenolic proton moved to the nearby azo nitrogen atom, in contrast to the free carboxylic acid ligand which is in the azo form.     

Two zincophosphite frameworks templated by 1,4-diaminobenzene: syntheses and structures of C6N2H10·Zn(HPO3)2 and (C6N2H8)0.5·ZnHPO3

The solution-mediated syntheses and single crystal structures of C₆N₂H₁₀·Zn(HPO₃)₂ (I) and (C₆N₂H₈)_0.5·ZnHPO₃ (II) are reported. Slight variation of the synthesis conditions led to two quite different phases. I contains infinite chains of ZnO₄ and HPO₃ groups with the protonated organic moiety acting as a template and interacting with the chains by NH⋯O hydrogen bonds and possible CH⋯O interactions. In II, the neutral 1,4-diamino benzene molecule bonds to Zn (as a ligand) and an unusual composite, “pillared”, structure results, with the organic species bridging 6³ polyhedral sheets, although NH⋯O bonds are also present. Similarities and differences to other zinc phosphites and phosphates are briefly discussed for I and II. Crystal data: C₆N₂H₁₀·Zn(HPO₃)₂, M_r=335.48, monoclinic, C2/c (No. 15), a=17.2471 (14) Å, b=9.0720 (8) Å, c=7.6529 (6) Å, β=103.752 (2)°, V=1163.09 (7) Å³, Z=4, R(F)=0.038, wR(F²)=0.084. (C₆N₂H₈)_0.5·ZnHPO₃, M_r=199.42, orthorhombic, Pbca (No. 61), a=8.0314 (16) Å, b=8.1299 (16) Å, c=18.830 (4) Å, V=1229.5 (4) Å³, Z=8, R(F)=0.026, wR(F²)=0.055.     

Synthesis,molecular and supramolecular structures,electrochemistry and magnetic properties of two macrocyclic dicopper(II) complexes: Microporous supramolecular assembly

Synthesis, molecular and supramolecular structures, electrochemistry and magnetic properties of two diphenoxo-bridged dicopper(II) compounds [Cu^II₂L(H₂O)(ClO₄)]·ClO₄·2H₂O (1) and [Cu^II₂L(N₃)₂]·2H₂O (2) derived from a tetraimino diphenolate macrocyclic ligand H₂L, obtained on [2+2] condensation of 4-methyl-2,6-diformylphenol and 2,2′-dimethyl-1,3-diaminopropane, are presented. Supramolecular structure of both 1 and 2 are three-dimensional resulting from hydrogen bonding interactions. Interestingly, the 3-D self-assembly of 2 contains micropores having the dimension of 0.35 nm. Electrochemical analyses reveal that both of these compounds exhibit two-step couples in the reduction window. Variable-temperature (2–300 K) magnetic susceptibilities measurements of the two compounds reveal that the metal centers in both of the complexes are coupled by strong antiferromagnetic interactions with J values (H = ?JS₁·S₂) ?776 and ?836 cm^?1 for 1 and 2, respectively.     

An experimental and theoretical investigation on hypervalent organoselenium(II) halides: Case study of [2-(Et2NCH2)C6H4]SeX (X = Cl,Br, I)

Cleavage of the Se–Se bond in [2-(Et₂NCH₂)C₆H₄]₂Se₂ (1) with SO₂Cl₂ (1:1 molar ratio) yielded the organoselenium(II) chloride [2-(Et₂NCH₂)C₆H₄]SeCl (2). Treatment of 2 with excess of KX yielded the organoselenium(II) halides [2-(Et₂NCH₂)C₆H₄]SeX [X = Br (3), I (4)]. The new compounds 2–4 were characterized by solution NMR spectroscopy (¹H, ¹³C, ⁷⁷Se, 2D experiments). The solid-state molecular structures of 2, 2·HCl and 3 were established by single crystal X-ray diffraction. Distorted T-shaped coordination geometries of type (C,N)SeX (X = Cl, Br) and CSeCl₂ were found for the neutral halides 2 and 3, and the zwitterionic species [2-{Et₂N⁺(H)CH₂}C₆H₄]SeCl₂￣ (2·HCl), respectively. DFT calculations were performed on 2–4 and the related tellurium compounds [2-(Et₂NCH₂)C₆H₄]TeX [X = Cl (5), Br (6) and I (7)] in order to elucidate the bond nature and FT-Raman features of this class of organochalcogen(II) derivatives.