Biochar coupled with contrasting nitrogen sources mediated changes in carbon and nitrogen pools,microbial and enzymatic activity in paddy soil

There is limited information on changes cause by nitrogen (N) fertilizers and biochar (BC) application in soil carbon and nitrogen availability, leaching and microbial activity at different growth stages in rice. This is first comprehensive study conducted in early and late seasons during 2019 to evaluate efficiency of various traditional N fertilizers (i) Urea (ii) Ammonium nitrate and (iii) Ammonium sulfate (315 kg N ha⁻¹) with or without biochar (30 t ha⁻¹). Results illustrated that all N fertilizers sources applied with biochar significantly increased soil organic carbon (SOC) content by an average 48.44% and 50.63%, soil total nitrogen (Nt) by 4.56% and 4.94%, reduction in total nitrogen leaching by 42.63% and 76.16%, while dissolved organic carbon leaching (DOC) augmented by 39.87% and 38.38% than non-applied treatments in early and late season, respectively. Additionally, soil microbial biomass C and N progressively increased with growth stages and was found higher than non-applied treatments in both seasons. Furthermore, combined application of N fertilizers and biochar, facilitated soil N transformation and the net concentration of NH₄⁺–N and NO₃⁻–N was relatively higher than non-charred treatments. Similarly, in both early and late seasons, urease enzyme activity increased by an average 13.52% and 13.55%, β-glucosidase by 15.99% and 19.27% however, catalase activity decreased by 14.58% and 12.38%, correspondingly. Moreover, no significant difference (p < 0.05) was recorded among N fertilizers sources in both seasons.     

Remediation of Cd2+ in aqueous systems by alkali-modified (Ca) biochar and quantitative analysis of its mechanism

Co-pyrolysis of straw and Ca(OH)₂ is a feasible modification method to improve the adsorption capacity of biochar for Cd. However, few studies have quantitatively analyzed the contribution of different adsorption mechanisms of alkali-modified biochar. In this study, the alkali-modified (Ca) biochar were prepared by co-pyrolyzing lime (Ca(OH)₂) and soybean straw (SBB) or rape straw (RSB) at 450 °C. The adsorption mechanism was investigated by a series of experiments and was provided by quantitative analysis. The maximum adsorption capacities of Cd²⁺ by Ca-SBB and Ca-RSB were calculated to be 78.49 mg g^?1 and 49.96 mg g^?1, which were 1.56 and 1.48 times higher than SBB (50.40 mg g^?1) and RSB (33.79 mg g^?1), respectively. Compared with the original biochar (SBB, RSB), alkali-modified biochar (Ca-SBB and Ca-RSB) were found to have faster adsorption kinetics and lower desorption efficiencies. The mechanism study indicated that Ca(OH)₂ modification effectively enhanced the contribution of ion exchange and decreased the contribution of functional groups complexation. After Ca(OH)₂ modification, precipitation and ion exchange mechanisms dominated Cd^2 + absorption on Ca-SBB, accounting for 49.85% and 34.94% of the total adsorption, respectively. Similarily ion exchange and precipitation were the main adsorption mechanism on Ca-RSB, accounting however for 61.91% and 18.47% of total adsorption, respectively. These results suggested that alkali-modified biochar has great potential to adsorp cadmium in wastewater.     

Potential effects of biochar application on mitigating the drought stress implications on wheat (Triticum aestivum L.) under various growth stages

Drought is the main abiotic stress that severely reduces wheat yield across the globe. To cope up this situation, use of organic amendments is the best option. Biochar is an organic soil amendment that is used to improve soil carbon, organic contents, improve water holding capacity of soil, enhance soil fertility and maintain desired soil. Present study was carried out under semi-arid climatic conditions to mitigate the adverse effects of drought at critical wheat growth stages i.e., tillering (DTS), flowering (DFS) and grain filling stage (DGFS) by using three biochar treatments viz. B₀ = Control, B₁ = 27.88 g kg⁻¹ and B₂ = 37.18 g kg⁻¹. Results revealed that drought stress negatively affected the growth and yield attributes of wheat at all critical growth stages, while, grain filling stage was found the most sensitive stage resulted severe yield reduction. However, biochar application significantly mitigated the detrimental effects of drought by improving number of fertile tillers (19.50%), spike length (6.52%), number of grains per spike (3.07%), thousand grain weight (6.42%), biological (9.43%) and economic yield (13.92%) as compared to control treatment. Moreover, biochar significantly improved water use efficiency and physiological attributes of drought stressed wheat. Principal component analysis linked different scales of study and demonstrated the potential of physio-biochemical traits to explain the wheat yield variations under drought condition with response to biochar application. In crux, biochar application (37.18 g kg⁻¹) can be used as an effective stratagem to achieve improved wheat grain yield through mitigating the adverse effects of drought stress.     

Quality variations of poultry litter biochar generated at different pyrolysis temperatures

Producing biochar and biofuels from poultry litter (PL) through slow pyrolysis is a farm-based, value-added approach to recycle the organic waste. Experiments were conducted to examine the effect of pyrolysis temperature on the quality PL biochar and to identify the optimal pyrolysis temperature for converting PL to agricultural-use biochar. As peak pyrolysis temperature increased incrementally from 300 to 600 °C, biochar yield, total N content, organic carbon (OC) content, and cation exchange capacity (CEC) decreased while pH, ash content, OC stability, and BET surface area increased. The generated biochars showed yields 45.7–60.1% of feed mass, OC 325–380 g kg⁻¹, pH 9.5–11.5, BET surface area 2.0–3.2 m² g⁻¹, and CEC 21.6–36.3 cmol_c kg⁻¹. The maximal transformation of feed OC into biochar recalcitrant OC occurred at 500 °C, yet 81.2% of the feed N was lost in volatiles at this temperature. To produce agricultural-use PL biochar, 300 °C should be selected in pyrolysis; for carbon sequestration and other environmental applications, 500 °C is recommended.     

Corncob-to-xylose residue (CCXR) derived porous biochar as an excellent adsorbent to remove organic dyes from wastewater

Biochar was prepared from corncob-to-xylose residue (CCXR) by KOH activation and anaerobic pyrolysis method. The effect of activation temperature on the microstructure of the biochar was studied. Results showed that the biochar prepared at 850°C (850NBC) possessed high specific surface area and exhibited excellent adsorption property. The maximum adsorption capacity of 2249 mg g⁻¹ was obtained when 850NBC was used for treating methylene blue (MB) solution. Adsorption isotherm fittings revealed that Langmuir and Freundlich models were applicable to 850NBC adsorption process, and the adsorption process was limited by adsorption site and the biochar surface functional groups. Furthermore, 850NBC showed good adsorption property when it was used to treat the other organic dyes of Congo red (751 mg g⁻¹), Orange II (735 mg g⁻¹), Indigo carmine (662 mg g⁻¹) and Methyl Orange (465 mg g⁻¹). Biochar 850NBC also possessed an acceptable recyclability which maintained 68.7% absorption capacity after 6 cycles when it was used to treat MB solution. These results proposed that 850NBC is expected to be a promising potential adsorbent for treating organic dyes waste water.     

Intercalated hybrid of kaolinite with KH2PO4 showing high ionic conductivity (∼10−4 S cm−1) at room temperature

In this paper, we present the study of preparation and ionic conductance for an intercalated hybrid of kaolinite with potassium dihydrogen. The intercalation efficiency is high up to ca. 90%. The intercalated hybrid has been characterized by powder X-ray diffraction, infrared spectroscopy, and thermogravimetric analysis. The ionic conductivity (σ) of the hybrid material is strongly dependent on the moisture in the environment, with σ = 8.4 × 10⁻¹⁰ S cm⁻¹ at 293 K and gradually increases to 7.16 × 10⁻⁹ S cm⁻¹ under N₂ atmosphere (anhydrous environment) at 353 K as well as an activation energy of E_a = 0.618 e V, whereas σ = 2.19 × 10⁻⁴ S cm⁻¹ at 100% relative humidity and 293 K with E_a = 0.44 eV. The mechanism that the moisture affects the ionic conductance of the intercalated hybrid is further discussed.     

Viability of Using Glycerin as a Co-substrate in Anaerobic Digestion of Sugarcane Stillage (Vinasse): Effect of Diversified Operational Strategies

Vinasse, from sugar and ethanol production, stands out as one of the most problematic agroindustry wastes due to its high chemical oxygen demand, large production volume, and recalcitrant compounds. Therefore, the viability of using glycerin as a co-substrate in vinasse anaerobic digestion was tested, to increase process efficiency and biogas productivity. The effect of feeding strategy, influent concentration, cycle length, and temperature were assessed to optimize methane production. Glycerin (1.53% v/v) proved to be a good co-substrate since it increased the overall methane production in co-digestion assays. CH₄ productivity enhanced exponentially as influent concentration increased, but when temperature was increased to 35 °C, biogas production was impaired. The highest methane productivity and yield were achieved using fed-batch mode, at 30 °C and at an organic loading rate of 10.1 kg COD m⁻³ day⁻¹: 139.32 mol CH₄ m⁻³ day⁻¹, 13.86 mol CH₄ kg COD_applied, and 15.30 mol CH₄ kg COD_removed. Methane was predominantly produced through the hydrogenotrophic route. In order to treat all the vinasse produced by a mid-size sugar and ethanol plant, nine reactors with 7263.4 m³ each would be needed. The energy generated by burning the biogas in boilers would reach approximately 92,000 MW h per season and could save up to US$ 240,000.00 per month in diesel oil demand.

     

Optimizing pyrolysis temperature of contaminated rice straw biochar: Heavy metal(loid) deportment,properties evolution,and Pb adsorption/immobilization

Pyrolysis of rice straw (RS), a popular method for producing biochar, effectively treats heavy metal(loid)-contaminated RS. Here, we carried out this process at different temperatures and investigated the deportment of heavy metal(loid)s and the property evolution of biochars. Also, the optimal pyrolysis temperature for Pb adsorption and immobilization was studied. We observed that increasing the temperature could volatilize the heavy metal(loid)s. Cd was the most volatile metal therein, followed by As, while Ni, Cu, and Pb were relatively refractory. More than 75% of the remaining heavy metal(loid)s were non-exchangeable fractions at 700 °C, significantly reducing the environmental risk during subsequent application. Meanwhile, higher pyrolysis temperature resulted in higher pH values, higher surface areas, and stronger Pb adsorption capacity of RS biochars. The maximum adsorption capacity (Q_m) of biochars was in the order of BC300 (77.2 mg·g^?1) < BC500 (137.2 mg·g^?1) < BC700 (222.6 mg·g^?1). Besides, high-temperature biochar could significantly reduce the vertical Pb migration. And BC700 increased the fraction of residual Pb from 39.7% to 44.0% in the soil under the acid rain leaching condition. Therefore, we propose that the heavy metal(loid)-contaminated RS biochar produced at 700 °C might be more suitable for the remediation of soil heavily polluted in the Pb-smelting area.     

Determination of total nitrogen in atmospheric wet and dry deposition samples

A microwave-assisted persulfate oxidation method followed by ion chromatographic determination of nitrate was developed for total nitrogen determination in atmospheric wet and dry deposition samples. Various operating parameters such as oxidation reagent concentrations, microwave power, and extraction time were optimized to maximize the conversion of total nitrogen to nitrate for subsequent chemical analysis. Under optimized conditions, 0.012 M K₂S₂O₈ and 0.024 M NaOH were found to be necessary for complete digestion of wet and dry deposition samples at 400 W for 7 min using microwave. The optimized extraction method was then validated by testing different forms of organic nitrogen loaded to pre-baked filter substrates and NIST SRM 1648 (urban particulate matter), and satisfactory results were obtained. In the case of wet deposition samples, standard addition experiments were performed. The suitability of the method for real-world application was assessed by analyzing a number of wet and dry deposition samples collected in Singapore during the period of March-April 2007. The organic nitrogen content was 15% (wet) and 30% (dry) of the total nitrogen. During the study period, the estimated wet fluxes for nitrate (NO₃⁻), ammonium (NH₄⁺), organic nitrogen (ON), and total nitrogen (TN) were 16.1 ± 6.5 kg ha⁻¹ year⁻¹, 11.5 ± 5.7 kg ha⁻¹ year⁻¹, 3.8 ± 1.5 kg ha⁻¹ year⁻¹and 31.5 ± 13.2 kg ha⁻¹ year⁻¹, respectively, while the dry fluxes were 2.5 ± 0.8 kg ha⁻¹ year⁻¹, 1.4 ± 0.9 kg ha⁻¹ year⁻¹, 2.3 ± 1.4 kg ha⁻¹ year⁻¹ and 7.5 ± 2.6 kg ha⁻¹ year⁻¹, respectively.     

Adsorption-reduction performance of tea waste and rice husk biochars for Cr(VI) elimination from wastewater

In the current study tea waste and rice husk biochars were used for the elimination of Cr(VI) from wastewater with the objectives to study the effect of pH (3–10), shaking time (0.016–24 h), sorbent dose (0.1–1.3 g L⁻¹) and initial concentration of Cr(VI) (10–250 mg L⁻¹). The Cr(VI) sorption was studied under various factors in which solution pH played a main role and at pH 5.2, maximum 99.3% and 96.8% Cr(VI) were removed by tea waste biochar (TWB) and rice husk biochar (RHB), respectively. In comparison, 197.5 mg g⁻¹ and 195.24 mg g⁻¹ Cr(VI) were sorbed by TWB and RHB, respectively with 120 mg L⁻¹ initial Cr(VI) concentration. In contact time study, after 2 h, equilibrium was achieved for both biochars which indicated that the Cr(VI) elimination from aqueous medium is a fast process. Kinetic and isotherm modeling data showed that pseudo-second order model and Langmuir (monolayer sorption) models provided the best fit for sorption of Cr(VI) onto both biochars. The –OH, COO– and –NH₂ functional groups were involved in the sorption of Cr(VI) onto biochars according to FTIR. Biochars produced from both biomass effectively removed Cr(VI) from polluted water, however in comparison sorption capacity of TWB was slightly higher than RHB. It was concluded that TWB and RHB could provide a cost-effective and viable option for elimination of Cr(VI) from wastewater.     

Cellulose II nanoelements prepared from fully mercerized, partially mercerized and regenerated celluloses by 4-acetamido-TEMPO/NaClO/NaClO2 oxidation

A softwood bleached kraft pulp (SBKP) and cotton lint cellulose were fully or partially mercerized, and these along with celluloses and commercially available regenerated cellulose fiber and beads were oxidized by 4-acetamido-TEMPO/NaClO/NaClO₂ at 60 °C and pH 4.8. Weight recovery ratios and carboxylate contents of the oxidized celluloses were 65–80% and 1.8–2.2 mmol g⁻¹, respectively. Transparent and viscous dispersions were obtained by mechanical disintegration of the TEMPO-oxidized celluloses in water. These aqueous dispersions showed birefringence between cross-polarizers, indicating that mostly individualized cellulose nanoelements dispersed in water were obtained by these procedures. Transmission electron microscopy observation showed that the cellulose nanoelements prepared from mercerized SBKP, repeatedly mercerized SBKP, mercerized cotton lint cellulose, regenerated cellulose beads and 18% NaOH-treated SBKP, i.e. partially mercerized SBKP, had similar morphologies and sizes, 4–12 nm in width and 100–200 nm in length. The 18% NaOH-treated SBKP was converted to cellulose nanoelements consisting of both celluloses I and II.     

Adsorption performance and stability of the modified straws and their extracts of cellulose,lignin, and hemicellulose for Pb2+: pH effect

Adsorption performance and stability of the carboxyl groups modified straws and their extracts of cellulose, lignin, and hemicellulose for Pb²⁺ were investigated, and the optimum pH range for Pb²⁺ adsorption was determined by considering both the stability and capacity of the modified biosorbents for the first time. Results showed that adsorption capacity and stability of the straws and extracts were both improved significantly after modification. Adsorption capacities of the modified straws and extracts followed the order: modified hemicellulose > modified lignin, modified straw > modified cellulose, while stability of them followed the reverse order. In the optimum pH range from 4.0 to 5.0, modified rape and cotton straw showed better stability than the modified maize straw, and total organic carbon (TOC) values determined from the two modified straws and extracts were lower than 5.0 mg L⁻¹ even after adsorption for 30 days, which reached the drinking water standard in China.     

Husk Cherry: Nutritional attributes,bioactive compounds and technological applications

Husk cherry (Physalis pruinosa; L) is a tropical fruit commonly grown in the Mediterranean region, and widely consumed fresh in most countries of the world. To enhance our knowledge about this promising fruit, the technological, therapeutic, and nutritional quality attributes of the raw fruits were investigated. The fruit had an orange yellowish color and a mild sweetness, with a pulp yield of 93.40 % (w/w) and a juice yield of 64.45 % (v/w). It contains high ratios of total sugar (41.65%), protein (14.56%), crude fibers (11.59 %), ascorbic acid (40.17 mg/100 g), ß-carotene (64.78 μg/g), total phenols (178.53 mg gallic acid 100 g⁻¹), anthocyanin (7.01 μg cyaniding-3-glucoside equivalents 100 g⁻¹), flavonoids (6.69 mg quercetin g⁻¹), and chlorophylls (19.03 μg g⁻¹). These fruit showed high antioxidant activities, which were found using DPPH and ABTS assays, and could be considered as a good source of antioxidants. The fruit contained several minerals, including potassium, phosphorus, sodium, and magnesium. The major amino acids in the fruit pulp were glutamic acid, aspartic acid, arginine, phenylalanine, proline, valine and alanine. The main polyphenols detected in the fruits were gallic acid, 4-hydroxybenzoic acid, benzoic acid, catechol, ellagic acid, chlorogenic acid, and epicatechin. Several flavonoids can be obtained in high concentrations, such as naringenin, luteolin, and rutin. Six functional food products (juice, jelly, jam, candied fruits, chocolate--coated dried fruits, and fruit leather) were manufactured using husk cherry fruits. The quality attributes of prepared products were determined. The highest crude fiber, ascorbic acid, β carotene, and total sugar compositions were found in chocolate-coated dry fruit products. All the manufactured products were well palatable amongst 25 trained panelists. The findings of this study confirmed the nutritional and technological potential of husk cherry fruits, which might be used effectively within the development of some functional products for food industries.     

Fire hazard and heat of combustion of sunflower seed hull pellets

This study is concerned with the investigation of the impact of heat flux on the fire hazard and the effective heat of combustion of sunflower seed hull pellets. Pellets produced by pressing common sunflower seed hulls (Helianthus annuus L.) were investigated. The samples were dried on water content of 0 mass% at a temperature of 103 ± 2 °C. The fire hazard and the heat of combustion have been determined via the cone calorimeter and by the testing procedure per ISO 5660-1:2015 at three heat fluxes (25, 35 and 50 kW m⁻²). The peak heat release rate increases with the increasing of the heat flux from 446 (at a heat flux of 25 kW m⁻²) to 601 kW m⁻² (at a heat flux of 50 kW m⁻²). The carbon monoxide yield lies in the interval from 82.50 (at a heat flux of 25 kW m⁻²) to 154.15 g kg⁻¹ (at a heat flux of 50 kW m⁻²). The effective heat of combustion decreases with the increasing of the heat flux from 15.84 (at a heat flux of 25 kW m⁻²) to 14.58 MJ kg⁻¹ (at a heat flux of 50 kW m⁻²).

     

Copper removal from aqueous solution using biochar: Effect of chemical activation

The main aim of this study was to test the efficiency of biochar for Cu removal from synthetic and soil solutions, respectively.The biochar was produced from brewers draff via pyrolysis. Additionally, the prepared biochar was also activated using 2 M KOH to enhance its sorption efficiency to remove Cu from both solutions. Two different aqueous solutions were prepared for these experiments: (i) a synthetic using Cu-nitrate salt with 0.01 M NaNO₃ and (ii) soil solution obtained from a Cu-contaminated soil using 0.01 M CaCl₂ leaching procedure. Batch sorption and column experiments were used to evaluate the efficiency of both biochar (BC) and activated biochar (BC_act) to remove Cu from the solutions.Results showed that both biochar samples are pure amorphous carbon and the Cu sorption is thus mainly a result of physical sorption on the biochar surface. Next, chemical activation, using 2 M KOH, significantly increased the total volume of all pores in biochar (from 0.01 ± 0.002 to 8.74 ± 0.18 mL g⁻¹). On the other hand, the BET surface area was similar for both sorbents (BC = 9.80 ± 0.62 m² g⁻¹ and BC_act = 11.6 ± 0.4 m² g⁻¹). Results also demonstrate enhanced sorption efficiency of the BC_act (10.3 mg g⁻¹) in comparison with the BC (8.77 mg g⁻¹). Additionally, enhanced Cu removal during column retention test was observed for the BC_act in both synthetic and soil solutions, respectively.In summary, the results showed that biochar prepared from brewers draff was able to remove Cu from both aqueous solutions.     

Development of novel cellulose acetate-g-poly(sodium 4-styrenesulfonate) proton conducting polyelectrolyte polymer

The development of cheap and efficient proton conducting polymers attracts scientists' attention, resulting in its potential role in fuel cell applications. This work synthesized a novel cellulose acetate-g-poly(sodium 4-styrene sulfonate) via free radical polymerization using potassium persulfate (KPS) as an initiator. The effects of varying KPS concentration, cellulose acetate (CA), sodium 4-styrene sulfonate (Na-SSA) content, reaction time, and temperature on the grafting parameters were studied. Grafting parameters, including the grafting yield (GY %), Add-on (%) and grafting efficiency (GE %) of the grafting reaction, were evaluated. Additionally, FTIR, TGA, DSC, ¹HNMR and EDX analyses were studied. The developed graft copolymers membranes illustrated increased water uptake values and ion exchange capacity (IEC) with the add-on (%). Furthermore, the proton conductivity of the developed graft copolymers was found superior (4.77 × 10⁻³ S.cm⁻¹) to the pristine CA membrane (0.035 × 10⁻³ S.cm⁻¹).     

Identification,quantification and Chrastil modelling of wheat straw wax extraction using supercritical carbon dioxide

Supercritical carbon dioxide (scCO₂) can be used as a “green” selective solvent for extractions of wheat straw waxes. For the first time, the crude extraction yields of wheat straw waxes and the yields of a single high value group of components (wax esters) using various scCO₂ conditions (305.15 to 373.15 K and 7.5 to 40 MPa) have been modelled using the Chrastil equation (Chrastil, 1982). The model accurately predicts both the crude yield and percentage of valuable wax esters within the extracts enabling maximum extraction efficiency. The key compounds within the waxes (fatty acids, sterols, fatty alcohols, wax esters, β-diketones and alkanes) have been identified and quantified. This study highlighted that, 14,16 hentriacontanedione was extracted at critical temperature and pressure in concentrations of 1000 μg.g⁻¹ straw. This molecule could demonstrate significant potential as a natural chelate for metal recovery and also in the formation of super-hydrophobic coatings.     

Reductive cleavage of the halogen–phosphorus and sulfur–phosphorus bonds with alkali metals

The reduction of thiophosphorus acid chlorides with alkali metals (Na, K) in liq. NH₃/THF solution, potassium anthracenide, and potassium naphthalenide was investigated. It was found that these types of phosphorus compounds easily undergo reduction to >P S⁻ anions. It was also demonstrated that >P O⁻ and >P S⁻ anions as well very efficiently undergo sulfurization with elementary sulfur in liquid ammonia to yield >P(O)S⁻ and >P(S)S⁻ anions, respectively. © 2002 Wiley Periodicals, Inc. Heteroatom Chem 13:330–339, 2002; Published online in Wiley Interscience (www.interscience.wiley.com). DOI 10.1002/hc.10040     

Co-Pyrolysis of Cotton Stalks and Low-Density Polyethylene to Synthesize Biochar and Its Application in Pb(II) Removal

It is inevitable that reclaimed cotton stalks will contain a certain amount of plastic film due to the wide application of plastic mulching during the process of cotton cultivation, and this makes it inappropriate to return it to the field or for it to be processed into silage. In this study, biochars were prepared by the co-pyrolysis of cotton stalk with low-density polyethylene (LDPE) in the proportions of 1:0, 3:1, 2:1, and 1:1 (w/w) at 400 °C, 450 °C, and 500 °C and maintaining them for 1 h. The effects of the co-pyrolysis of cotton stalk with LDPE on the properties of biochars (e.g., pH, yield, elemental analysis, specific surface area, etc.) and the Pb(II) removal capacity were analyzed. Co-pyrolysis cotton stalks with LDPE could delay the decomposition of LDPE but could promote the decomposition of cotton stalk. At 400 °C and 450 °C, the addition of LDPE decreased the H/C ratio, while no significant difference was found between the pristine biochar and the blended biochar pyrolyzed at 500 °C. An FTIR analysis indicated that the surface functional groups of biochar were not affected by the addition of LDPE, except for CH₃ and CH₂. The results of the SEM showed that LDPE could cover the surface of biochar when pyrolyzed at 400 °C, while many macropores were found in the blended biochar that was pyrolyzed at 450 °C and 500 °C, thus increasing its surface area. The blended biochar that was pyrolyzed at 500 °C was more effective in the removal of Pb(II) than the cotton-stalk-derived biochar, which was dominated by monolayer adsorption with a maximum adsorption capacity of approximately 200 mg·g⁻¹. These results suggested that the co-pyrolysis of cotton stalks and LDPE may be used to produce biochar, which is a cost-effective adsorbent for heavy metal removal from aqueous solutions.     

Rate coefficients for the gas-phase OH + furan (C4H4O) reaction between 273 and 353 K

Rate coefficients, k₁, for the gas-phase OH radical reaction with the heterocyclic ether C₄H₄O (1,4-epoxybuta-1,3-diene, furan) were measured over the temperature range 273–353 K at 760 Torr (syn. air). Experiments were performed using: (i) the photochemical smog chamber THALAMOS (thermally regulated atmospheric simulation chamber, IMT NE, Douai-France) equipped with Fourier Transform Infrared (FTIR) and Selected Ion Flow Tube Mass Spectrometry (SIFT-MS) detection methods and (ii) a photochemical reactor coupled with FTIR spectroscopy (PCR, University of Crete, Greece). k₁(273–353 K) was measured using a relative rate (RR) method, in which the loss of furan was measured relative to the loss of reference compounds with well-established OH reaction rate coefficients. k₁(273–353 K) was found to be well represented by the Arrhenius expression (1.30 ± 0.12) × 10⁻¹¹ exp[(336 ± 20)/T] cm³ molecule⁻¹ s⁻¹, with k₁(296 K) measured to be (4.07 ± 0.32) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹. The k₁(296 K) and pre-exponential quoted error limits are 2σ and include estimated systematic errors in the reference rate coefficients. The observed negative temperature dependence is consistent with a reaction mechanism involving the OH radical association to a furan double bond. Quantum mechanical molecular calculations show that OH addition to the α-carbon (ΔH_r(296 K) = −121.5 kJ mol⁻¹) is thermochemically favored over the β-carbon (ΔH_r(296 K) = −52.9 kJ mol⁻¹) addition. The OH-furan adduct was found to be stable over the temperature range of the present measurements. Maleic anhydride (C₄H₂O₃) was identified as a minor reaction product, 3% lower-limit yield, demonstrating a non-ring-opening active reaction channel. The present results are critically compared with results from previous studies of the OH + furan reaction rate coefficient. The infrared spectrum of furan was measured as part of this study and its estimated climate metrics are reported.