Synthesis of the Dy: SrMoO4 with High Photocatalytic Activity under Visible Light Irradiation

Dysprosium (Dy)‐doping SrMoO₄ (with different molar ratio of Dy/Sr = 0/100, 10/100, 15/100 and 20/100) have been synthesized by high temperature thermal decomposition of metal–organic salt in organic solvent with a high boiling point. Their structures, morphology, and optical properties were characterized by X‐ray diffraction (XRD), high‐resolution tuning electron microscopy ((HR)TEM), X‐ray photo‐electron spectroscopy (XPS), and UV–vis diffuse reflectance spectroscopy (UV–vis DRS). Using this method, the pure phase, nano‐size, and low band gap of SrMoO₄ sample are obtained. The results shows that the size of as‐synthesized SrMoO₄ nanoparticles was about 200 nm. The band gap of Dy‐doped SrMoO₄ ranges from 3.76–3.90 eV, and decreases with increasing Dy concentration. The photocatalytic performance of as‐syntheszied products were determined from the degradation of methylene blue (MB) by UV–vis light irradiation. The 15 mol%Dy‐doped SrMoO₄ sample shows the best performance for photocatalytic degradation of methyl blue of nearly 100% in 120 min under visible irradiation, which is higher than most of those reported before. The present work is meaningful for revealing the underlying mechanism in photocatalyst and improving the photocatalytic performance.     

Fabrication and characterization of Fe_3O_4@SiO_2@TiO_2@Ho nanostructures as a novel and highly efficient photocatalyst for degradation of organic pollution

In this work we synthesize a novel and highly efficient photocatalyst for degradation of methyl orange and rhodamine B. In addition, a new method for synthesis of Fe_3O_4@SiO_2@TiO_2@Ho magnetic core-shell nanoparticles with spherical morphology is proposed. The crystal structures, morphology and chemical properties of the as-synthesized nanoparticles were characterized using Fourier transform infrared spectroscopy(FT-IR), scanning electron microscopy(SEM), transmission electron microscopy(TEM), energy dispersive X-ray(EDS), X-ray diffraction(XRD), UV–vis diffuse reflectance spectroscopy(DRS) and vibrating sample magnetometer(VSM) techniques. The photocatalytic activity of Fe_3O_4@SiO_2@TiO_2@Ho was investigated by degradation of methyl orange(MO) as cationic dye and rhodamine B(Rh B) as anionic dye in aqueous solution under UV/vis irradiation. The results indicate that about 92.1% of Rh B and78.4% of MO were degraded after 120 and 150 min, respectively. These degradation results show that Fe_3O_4@SiO_2@TiO_2@Ho nanoparticles are better photocatalyst than Fe3O4@Si O2@TiO 2@Ho for degradation of MO and Rh B. As well as, the catalyst shows high recovery and stability even after several separation cycles.     

Surfactant assisted hydrothermal synthesis of SnO nanoparticles with enhanced photocatalytic activity

SnO nanoparticles have been successfully synthesized in the presence of Triton-X 100 (TX-100) surfactant via hydrothermal method for the first time, and the photocatalytic activity under UV and visible light irradiation for the degradation of Methylene Blue (MB) and Rhodamine B (RdB) organic textile dyes was investigated. The structural, morphological and chemical characterizations were investigated by using X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), selected area electron diffraction (SAED), energy dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), Fourier Transform Infrared Spectroscopy (FTIR), UV–vis. diffuse reflectance spectroscopy (UV–vis DRS) and photoluminescence (PL) analysis. The results reveal that the addition of surfactant, TX-100, in the precursor solutions leads to reduction in crystallite size with significant changes in morphological structure of SnO nanoparticles. The synthesized SnO nanoparticles show excellent photocatalytic activity under UV or visible light irradiation. MB and RdB dyes degraded completely under UV irradiation after 90 and 150 min, respectively. Also, MB and RdB dyes degraded only 150 min later under visible light illumination with a little amount of photocatalyst (0.8 g/L). Hence, this work explores the facile route to synthesizing efficient SnO nanoparticles for degrading organic compound under both UV and visible light irradiations.     

Synthesis of ZnTiO3/tourmaline/Ni foam catalyst and enhanced photocatalytic performance

ZnTiO₃/tourmaline loaded on the nickel foam (ZnTiO₃/tourmaline/Ni-foam) is prepared by a facile coating method. Morphology and structure of the photocatalyst were characterized by X-ray diffraction (XRD), scanning electrons microscopy (SEM), raman spectroscopy, UV–vis diffuse reflectance spectrum (UV–vis DRS) and photoluminescence spectroscopy (PL). The photocatalytic properties of the materials were tested by using the Rhodamine B (RhB) solution as the target pollutant. The results indicates that the ZnTiO₃/tourmaline/Ni foam exhibited higher photocatalytic activity than that of ZnTiO₃ and ZnTiO₃/Ni foam under ultraviolet (UV) light irradiation, and its degradation rate was up to 99.2%. Moreover, the degradation rate remained at 91.3% after eight consecutive photocatalytic reaction cycles. The outstanding photocatalytic performances of ZnTiO₃/tourmaline/Ni foam was mainly attributed to the existence of tourmaline, which can help to inhibit the recombination of electron-hole paris, and the proper pore structure of the carrier. Meanwhile, the trapping experiments indicated that ·O₂^– was the main active species in the photocatalytic degradation of RhB.     

Host (nanocavity of dealuminated Y zeolite)-guest (Ce(IV) salophen/TiO<Subscript>2</Subscript>) nanocomposite materials as an efficient photocatalyst for degradation of 4-nitrophenol

Ce(IV) salophen encapsulated into dealuminated Y zeolite was prepared by the flexible ligand method. Incorporation of TiO₂ into nanocages of dealuminated Y zeolite was performed by the impregnation method. The obtained photocatalyst was characterized by FT-IR, XRD, DRS, SEM, EDS and ICP techniques. The amount of Ce(salophen) in the zeolite supercages was 0.07 mg/g of encapsulated zeolite. This catalytic system was investigated in the photodegradation of 4-nitrophenol. In this work, the effect of dark conditions, and visible and UV illumination was investigated for the degradation of 4-nitrophenol. In addition, the effect of other parameters including catalyst loading, H₂O₂ and TiO₂ was studied in the degradation of 4-nitrophenol. The obtained results reveal that the photocatalyst performance depends on catalyst loading, the presence of H₂O_2, and UV illumination.     

Elaboration of nano titania-magnetic reduced graphene oxide for degradation of tartrazine dye in aqueous solution

In this paper, magnetic nanocomposites are synthesized by loading reduced graphene oxide (RG) with two components of nanoparticles consisting of titanium dioxide (TiO₂) and magnetite (Fe₃O₄) with varying amounts. The structural and magnetic features of the prepared composite photocatalysts were investigated by powder X-ray diffraction (XRD), Fourier transform infrared spectra (FT-IR), transmission electron microscopy (TEM), UV–vis diffuse reflectance spectra (UV–vis/DRS), Raman and vibrating sample magnetometer (VSM). The resulting TiO₂/magnetite reduced graphene oxide (MRGT) composite demonstrated intrinsic visible light photocatalytic activity, on degradation of tartrazine (TZ) dye from a synthetic aqueous solution. Specifically, it exhibits higher photocatalytic activity than magnetite reduced graphene oxide (MRG) and TiO₂ nanoparticles. The photocatalytic degradation of TZ dye when using MRG and TiO₂ for 3 h under visible light was 35% and 10% respectively, whereas for MRGT it was more than 95%. The higher photocatalytic efficiency of MRGT is due to the existence of reduced graphene oxide and magnetite which enhances the photocatalytic efficiency of the composite in visible light towards the degradation of harmful soluble azo dye (tartrazine).     

Green synthesis of activated carbon doped tungsten trioxide photocatalysts using leaf of basil (Ocimum basilicum) for photocatalytic degradation of methylene blue under sunlight

Tungsten oxide (WO₃) nanoparticles were prepared hydrothermally by basil leaves extract, and Activated Carbon (AC) was prepared by the carbonization of date pits. Moreover, 1, 2 and 3% of AC doped WO₃ nanoparticles have been fabricated under hydrothermal conditions. The obtained samples have been characterized by using different techniques such as x-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), simultaneous thermogravimetric analysis (TG-DTGA), fourier transform infrared (FT-IR), BET surface area, and Ultra-Violet spectroscopy (UV–Vis). It was observed that band-gap energy of the fabricated materials decreases by increasing AC amount. Similarly, BET surface area and porosity results showed increasing the content of AC, surface area, pore size and pore volume were decreased. The functional groups, determined by FT-IR, played a significant role in the photocatalytic performance. The photocatalytic performance of fabricated samples was used for the degradation of methylene blue (MB) at neutral pH under visible light radiations, and it is observed that WO₃/3%AC photocatalyst showed the highest degradation of MB. Both, capped phytochemicals of basil extract and the nanocomposites, were improved the photocatalytic performance, about 94% photodegradation was observed within 25 min under the reaction conditions. The photocatalyst was stable and about 85% and 81% photodegradation of MB were found under the two times of reusability tests.     

Photodegradation of Rhodamine B on Sulfur Doped ZnO/TiO2 Nanocomposite Photocatalyst under Visible-light Irradiation

Sulfur doped ZnO/TiO₂ nanocomposite photocatalysts were synthesized by a facile sol‐gel method. The structure and properties of catalysts were characterized by X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), UV‐vis diffusive reflectance spectroscopy (DRS) and N₂ desorption‐adsorption isotherm. The XRD study showed that TiO₂ was anatase phase and there was no obvious difference in crystal composition of various S‐ZnO/TiO₂. The XPS study showed that the Zn element exists as ZnO and S atoms form SO^2?₄. The prepared samples had mesoporosity revealed by N₂ desorption‐adsorption isotherm result. The degradation of Rhodamine B dye under visible light irradiation was chosen as probe reaction to evaluate the photocatalytic activity of the ZnO/TiO₂ nanocomposite. The commercial TiO₂ photocatalyst (Degussa P25) was taken as standard photocatalyst to contrast the prepared different photocatalyst in current work. The improvement of the photocatalytic activity of S‐ZnO/TiO₂ composite photocatalyst can be attributed to the suitable energetic positions between ZnO and TiO₂, the acidity site caused by sulfur doping and the enlargement of the specific area. S‐3.0ZnO/TiO₂ exhibited the highest photocatalytic activity under visible light irradiation after Zn amount was optimized, which was 2.6 times higher than P25.     

Fe2O3/ZnO/ZnFe2O4 composites for the efficient photocatalytic degradation of organic dyes under visible light

In this study, novel ternary Fe₂O₃/ZnO/ZnFe₂O₄ (ZFO) composites were successfully prepared through a simple hydrothermal reaction with subsequent thermal treatment. The as-prepared products were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET) analysis, Barrett-Joyner-Halenda (BJH) measurement, and UV–vis diffuse reflectance spectroscopy (UV–vis DRS). The photocatalytic degradation of rhodamine B (Rh B) under visible light irradiation indicated that the ZFO composites calcined at 500 °C has the best photocatalytic activity (the photocatalytic degradation efficiency can reach up to 95.7% within 60 min) and can maintain a stable photocatalytic degradation efficiency for at least three cycles. In addition, the photocatalytic activity of ZFO composites toward dye decomposition follows the order cationic Rh B > anionic methyl orange. Finally, using different scavengers, superoxide and hydroxyl radicals were identified as the primary active species during the degradation reaction of Rh B.     

Ag负载CdMoO4光催化剂的制备及其催化性能

采用硼氢化钠还原法制备了Ag负载CdMoO₄光催化剂。运用X射线粉末衍射（XRD）、扫描电镜（SEM）和透射电镜（TEM）等测试手段对催化剂的组成和结构进行了表征;采用紫外-可见漫反射光谱（UV-Vis DRS）和X射线光电子能谱（XPS）等技术对催化剂的光响应和表面状态进行了分析,考察了不同Ag负载量对CdMoO₄紫外光降解罗丹明B和可见光选择性氧化苯甲醇性能的影响。结果表明,与CdMoO₄相比,Ag/CdMoO₄具有更高的光催化活性。利用活性物种捕获实验探讨其光催化降解过程的反应机理,实验结果显示O₂^-·和·OH是光催化降解过程的主要活性物种。     

Ag3PO4/MoS2纳米片复合催化剂制备及可见光催化性能

采用机械球磨法成功制备Ag₃PO₄/MoS₂纳米片复合催化剂。运用X射线衍射仪（XRD）、透射电子显微镜（TEM）、扫描电子显微镜（SEM）、紫外可见漫反射光谱（UV-Vis）和荧光发射光谱（PL）对复合催化剂的结构和形貌进行了表征。结果表明,Ag₃PO₄纳米粒子均匀地附着在MoS₂纳米片层结构上,两者形成紧密结合。以亚甲基蓝为模拟污染物,研究复合催化剂在可见光照射下的光催化特性;通过循环实验考察复合催化剂的稳定性。结果显示,含有1%的MoS₂纳米片与Ag₃PO₄形成的复合催化剂在30 min内对亚甲基蓝的降解率为95%,其降解动力学常数是纯相Ag₃PO₄的2倍。经过5次循环实验后复合催化剂对于亚甲基蓝的降解率为84%,而纯Ag₃PO₄对于亚甲基蓝的降解率仅为35%。Ag₃PO₄/MoS₂纳米片复合催化剂具有优良的光催化活性和高稳定性,主要归因于二硫化钼纳米片与磷酸银形成异质结,磷酸银激发的电子和二硫化钼纳米片产生的空穴直接复合,从而促使光生电子从磷酸银晶体表面快速分离,减轻了磷酸银的光电子腐蚀,同时也提高了复合物的光催化活性。     

Ag_3PO_4/MoS_2纳米片复合催化剂制备及可见光催化性能

采用机械球磨法成功制备Ag_3PO_4/MoS_2纳米片复合催化剂。运用X射线衍射仪(XRD)、透射电子显微镜(TEM)、扫描电子显微镜(SEM)、紫外可见漫反射光谱(UV-Vis)和荧光发射光谱(PL)对复合催化剂的结构和形貌进行了表征。结果表明,Ag_3PO_4纳米粒子均匀地附着在MoS_2纳米片层结构上,两者形成紧密结合。以亚甲基蓝为模拟污染物,研究复合催化剂在可见光照射下的光催化特性;通过循环实验考察复合催化剂的稳定性。结果显示,含有1%的MoS_2纳米片与Ag_3PO_4形成的复合催化剂在30 min内对亚甲基蓝的降解率为95%,其降解动力学常数是纯相Ag_3PO_4的2倍。经过5次循环实验后复合催化剂对于亚甲基蓝的降解率为84%,而纯Ag_3PO_4对于亚甲基蓝的降解率仅为35%。Ag_3PO_4/MoS_2纳米片复合催化剂具有优良的光催化活性和高稳定性,主要归因于二硫化钼纳米片与磷酸银形成异质结,磷酸银激发的电子和二硫化钼纳米片产生的空穴直接复合,从而促使光生电子从磷酸银晶体表面快速分离,减轻了磷酸银的光电子腐蚀,同时也提高了复合物的光催化活性。     

Ag负载CdMoO4光催化剂的制备及其催化性能

采用硼氢化钠还原法制备了Ag负载Cd Mo O4光催化剂。运用X射线粉末衍射(XRD)、扫描电镜(SEM)和透射电镜(TEM)等测试手段对催化剂的组成和结构进行了表征;采用紫外-可见漫反射光谱(UV-Vis DRS)和X射线光电子能谱(XPS)等技术对催化剂的光响应和表面状态进行了分析,考察了不同Ag负载量对Cd Mo O4紫外光降解罗丹明B和可见光选择性氧化苯甲醇性能的影响。结果表明,与Cd Mo O4相比,Ag/Cd Mo O4具有更高的光催化活性。利用活性物种捕获实验探讨其光催化降解过程的反应机理,实验结果显示O2-·和·OH是光催化降解过程的主要活性物种。     

Synthesis,characterization and photocatalytic application of TiO2/magnetic graphene for efficient photodegradation of crystal violet

A magnetized nano‐photocatalyst based on TiO₂/magnetic graphene was developed for efficient photodegradation of crystal violet (CV). Scanning electron microscopy, X‐ray diffraction, energy‐dispersive X‐ray spectroscopy and elemental mapping were used to characterize the prepared magnetic nano‐photocatalyst. The photocatalytic activity of the synthesized magnetic nano‐photocatalyst was evaluated using the decomposition of CV as a model organic pollutant under UV light irradiation. The obtained results showed that TiO₂/magnetic graphene exhibited much higher photocatalytic performance than bare TiO₂. Incorporation of graphene enhanced the activity of the prepared magnetic nano‐photocatalyst. TiO₂/magnetic graphene can be easily separated from an aqueous solution by applying an external magnetic field. Effects of pH, magnetized nano‐photocatalyst dosage, UV light irradiation time, H₂O₂ amount and initial concentration of dye on the photodegradation efficiency were evaluated and optimized. Efficient photodegradation (>98%) of the selected dye under optimized conditions using the synthesized nano‐photocatalyst under UV light irradiation was achieved in 25 min. The prepared magnetic nano‐photocatalyst can be used in a wide pH range (4–10) for degradation of CV. The effects of scavengers, namely methanol (OH^? scavenger), p‐benzoquinone (O₂^?? scavenger) and disodium ethylenediaminetetraacetate (hole scavenger), on CV photodegradation were investigated.     

Preparation of Ce‐doped TiO2 Hollow Fibers and Their Photocatalytic Degradation Properties for Dye Compound

Cerium‐doped titanium dioxide (TiO₂) with a hollow fiber structure was successfully prepared using ammonium ceric nitrate and tetrabutyltitanate as precursors and cotton fiber as the template. The effects of cerium (Ce)‐doping on the crystallite sizes, crystal pattern, and optical property of the prepared catalysts were investigated by means of techniques such as scanning electron microscopy (SEM), X‐ray diffraction (XRD), BET surface area, and UV‐vis diffuse absorption spectroscopy. SEM observation showed that the prepared TiO₂ fibers possessed fibrous shape inherited from the cotton fiber and had a hollow structure. As confirmed by XRD and UV‐vis diffuse absorption spectroscopy examinations, Ce‐doping restrained the growth of grain size and extended the photoabsorption edge of TiO₂ hollow fiber into the visible light region. The present photocatalyst showed higher photocatalytic reactivity in photodegradation of highly concentrated methylene blue (MB) solutions than pure TiO₂ under UV and visible light, and the amount of Ce‐doped significantly affected the catalytic property. In the experiment condition, the photocatalytic activity of 0.5 mol% Ce‐doped TiO₂ fiber was optimal of all the prepared samples. In addition, the possibility of cyclic usage of the photocatalyst was also confirmed. The material was easily removed by centrifugal separation. Therefore, using the template method and by doping with cerium, TiO₂ may hopefully become a low‐energy consuming, high activity and green environmentally friendly catalytic material.     

Preparation of nanocrystalline TiO<Subscript>2</Subscript> powders for photocatalytic oxidation of phenol

Nanocrystalline TiO₂ powders in the anatase, rutile, and mixed phases prepared by hydrolysis of TiCl₄ solution were of ultrafine size (<7.2 nm) with high specific surface areas in the range 167 to 388 m²/g. In the photocatalytic degradation of phenol as model reaction, the photocatalytic properties of TiO₂ nanoparticles were evaluated by use of UV–vis absorption spectroscopy and total organic carbon (TOC) content. The synthetic mixed-phase TiO₂ powder calcined at 400 °C had higher activity than pure anatase or rutile; it degraded more than 90% phenol to CO₂ (evaluated by TOC) after irradiation with near UV light for 90 min at a catalyst loading of 0.4 g/L. The TOC results indicated that rutile TiO₂ crystallites of particle size 7.2 nm resulted in much better photocatalytic performance than particles of larger size. This result suggested that some intermediates, not determined by UV–vis absorption spectroscopy, existed in the solution after the photocatalytic process over the rutile TiO₂ photocatalysts of larger crystallite size.     

水热法制备Ag3PO4/HAP复合光催化剂及其光催化性能（英文）

以牡蛎壳为原料,利用水热法合成高纯度的羟基磷灰石(HAP)载体,经磷酸银负载后,制备出纳米棒状Ag3PO4/HAP复合光催化剂。利用扫描电镜(SEM)、高分辨透射电镜(HRTEM)、X射线衍射(XRD)、X射线光电子能谱仪(XPS)对样品进行表征,并考察不同的制备因素对催化剂降解亚甲基蓝溶液性能的影响。结果表明,当质量比为1∶2时制备的1∶2-Ag3PO4/HAP催化剂的表现最为突出,在10 min时即可达到50%的降解率,在40 min时基本降解完全,是一种高效的复合光催化剂。     

Microwave-Assisted Hydrothermal Preparation, Characterization and Photocatalytic Properties of a Chrysanthemum-Shaped ZnWO4 Photocatalyst

A novel chrysanthemum-shaped monocline ZnWO₄ photocatalyst was synthesized by microwave-assisted hydrothermal method with Na₂WO₄·2H₂O and Zn(NO₃)₂·6H₂O as raw materials at different reaction temperatures. The prepared ZnWO₄ photocatalysts were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, Field emission scanning electron microscopy (FE-SEM), Transmission electron microscopy, Photoluminescence spectrum (PL) and UV–Vis absorption spectrum (UV–Vis). The photocatalytic property of the prepared chrysanthemum-shaped monocline ZnWO₄ photocatalyst was evaluated by the degradation of Rhodamine B (RhB) in aqueous solution. The effects of reaction temperature on the photocatalytic degradation efficiency of RhB were investigated. The results indicated that the chrysanthemum-shaped monocline ZnWO₄ photocatalyst is prepared by foliated powders with the sizes of about 30 nm and 500 nm respectively at 160 and 220 °C. The PL relative intensity of prepared ZnWO₄ photocatalyst is apparently intensifying with increasing temperature. The photocatalytic property decreases with the increasing recombination probability of the excited electrons and holes. The chrysanthemum-shaped monocline ZnWO₄ photocatalyst prepared at 160 °C possesses the best photocatalytic property, and the degradation efficiency of RhB at 180 min UV-light irradiation is achieved 75 %. The ZnWO₄ has good reusability property on degradation of RhB and the degradation rate is still higher than 65 % after three cycles.     

Photocatalytic performance of Ag doped SnO2 nanoparticles modified with curcumin

Visible light active Ag doped SnO₂ nanoparticles modified with curcumin (Cur–Ag–SnO₂) have been prepared by a combined precipitation and chemical impregnation route. The optical properties, phase structures and morphologies of the as-prepared nanoparticles were characterized using UV–visible diffuse reflectance spectra (UV–vis-DRS), X-ray powder diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS). The surface area was measured by Brunauer. Emmett. Teller (B.E.T) analysis. Compared to bare SnO₂, the surface modified photocatalysts (Ag–SnO₂ and Cur–Ag–SnO₂) showed a red shift in the visible region. The photocatalytic activity was monitored via the degradation of rose bengal (RB) dye and the results revealed that Cur–Ag–SnO₂ shows better photocatalytic activity than that of Ag–SnO₂ and SnO₂. The superior photocatalytic activity of Cur–Ag–SnO₂ could be attributed to the effective electron-hole separation by surface modification. The effect of photocatalyst concentration, initial dye concentration and electron scavenger on the photocatalytic activity was examined in detail. Furthermore, the antifungal activity of the photocatalysts and the reusability of Cur–Ag–SnO₂ were tested.     

Nanocomposite of CeVO4/BiVO4 Loaded on Reduced Graphene Oxide for the Photocatalytic Degradation of Methyl Orange

A facile procedure, involving one-pot synthesis of CeVO₄/BiVO₄ and in-situ reduction of graphene oxide (GO), has been used to prepare CeVO₄/BiVO₄/rGO nanocomposites. Different ratios of the CeVO₄–BiVO₄ were prepared to afford composites represented as CBVG3, CBVG5, and CBVG7. The ternary nanocomposite materials were characterized by using powder X-ray diffractometer (XRD), scanning electron microscopy (SEM), transmission electron microscope (TEM), photoluminescence and UV–vis spectroscopic techniques. Photocatalytic efficiency of the as-prepared ternary nanocomposites was investigated through the photo degradation of methyl orange under a visible light irradiation at 470 nm. The photocatalytic performance was enhanced by loading the CeVO₄/BiVO₄ nanoparticles on reduced graphene oxide (rGO), given MO degradation rate of 57, 65, 80, and 90% for BVG, CBVG3, CBVG5, and CBVG7, respectively after exposure to visible light for 120 min. Effects of experimental process parameters including initial dye concentration, catalysts loading and effect of different modification regimes were studied using CBVG7, which exhibited the highest efficiency. The improvement in the photocatalytic efficiency may be attributed to increased surface area of the nanocomposites, enhanced light absorption capacity and improved charge separation. The study showed a one-pot synthesis route to prepare promising CeVO₄/BiVO₄/GO nanocomposites for the photo-enhanced degradation of dye contaminants.