THE GENERAL SOLUTION FOR DYNAMIC RESPONSE OF NONHOMOGENEOUS BEAM WITH VARIABLECROSSSECTION

ＴＨＥＧＥＮＥＲＡＬＳＯＬＵＴＩＯＮＦＯＲＤＹＮＡＭＩＣＲＥＳＰＯＮＳＥＯＦＮＯＮＨＯＭＯＧＥＮＥＯＵＳＢＥＡＭＷＩＴＨＶＡＲＩＡＢＬＥＣＲＯＳＳＳＥＣＴＩＯＮＪｉＺｈｅｎ－ｙｉ（纪振义）（ＡｎｈｕｉＡｒｃｈｉｔｅｃｔｕｒａｌＩｎｄｕｓｔｒｙＣｏｌｌ...     

An efficient Galerkin meshfree formulation for shear deformable beam under finite deformation

This paper proposes a geometrically nonlinear total Lagrangian Galerkin meshfree formulation based on the stabilized conforming nodal integration for efficient analysis of shear deformable beam. The present nonlinear analysis encompasses the fully geometric nonlinearities due to large deflection, large deformation as well as finite rotation. The incremental equilibrium equation is obtained by the consistent linearization of the nonlinear variational equation. The Lagrangian meshfree shape function is utilized to discretize the variational equation. Subsequently to resolve the shear and membrane locking issues and accelerate the computation, the method of stabilized conforming nodal integration is systematically implemented through the Lagrangian gradient smoothing operation. Numerical results reveal that the present formulation is very effective.     

具有梯度界面层的双材料悬臂梁解析解

采用应力函数法,求得了具有弹性模量沿高度线性变化的梯度界面层的双材料悬臂梁在均布载荷作用下的应力和位移解析解。该解可退化为双材料梁、弹性模量沿整个梁高线性变化的梯度梁以及均质材料梁的情况,退化为均质材料梁时与已有结果一致。通过一具体算例将得到的解析解与有限元解进行了比较,两者吻合较好。并讨论了梯度界面层的高度变化对梁中的应力和梁端挠度的影响。结果表明,在梁的总高度不变的情况下,增加梯度界面层的高度可减小弯曲应力和梁端挠度,而对挤压应力和切应力的影响很小。     

EXACT SOLUTION OF LARGE DEFORMATION BASIC EQUATIONS OF CIRCULAR MEMBRANE UNDER CENTRAL FORCE

Exact solution of the nonlinear boundary value problem for the basic equation and boundary condition of circular membrane under central force was obtained by using new simple methods. The existence and uniqueness of the solution were discussed by using of modern immovable point theorems. Although specific problem is treated, the basic principles of the methods can be applied to a considerable variety of nonlinear problems.     

Post-buckling of a cantilever rod with variable cross-sections under combined load

IntroductionSinceEuler[1] ,Lagrange[2 ] ,Love[3 ] etal.investigatedtheslenderrod ,asoneofthebasicstructuralstabilityproblems ,manyattentionshavebeenpaidtothepost_bucklingofelasticrodsforalongtime .Today ,flexiblerodshavebeenwidelyusedasspring ,linkages ,robot’sarms,largeantennasandsoon .Hence ,thestudiesofpost_bucklingofelasticrodshavewideengineeringandapplyingbackgroundsinrecentdays .Basedontheassumptionthattheaxiallineoftherodisinextensible ,Timoshenkoetal.[4] examinedthepost_bucklingofco…     

Differential quadrature method for bending of orthotropic plates with finite deformation and transverse shear effects

Based on the Reddy ‘s theory of plates with the effect of higher-order shear deformations, the governing equations for bending of orthotropic plates with finite deformations were established. The differential quadrature ( DQ ) method of nonlinear analysis to the problem was presented. New DQ approach, presented by Wang and Bert ( DQWB), is extended to handle the multiple boundary conditions of plates. The techniques were also further extended to simplify nonlinear computations. The numerical convergence and comparison of solutions were studied. The results show that the DQ method presented is very reliable and valid. Moreover, the influences of geometric and material parameters as well as the transverse shear deformations on nonlinear bending were investigated. Numerical results show the influence of the shear deformation on the static bending of orthotropic moderately thick plate is significant.     

纵横载荷作用下功能梯度梁的弯曲和过屈曲

基于一阶非线性梁理论和物理中面概念,导出了纵横向载荷作用下功能梯度材料(FGM)梁非线性弯曲和过屈曲问题的控制方程,并获得了该问题的精确解;据此解研究了梯度材料性质、外载荷、横向剪切变形以及边界条件等因素对功能梯度材料梁非线性力学行为的影响,分析中假设功能梯度材料性质只沿梁厚度方向,并按成分含量的幂指数函数形式变化。结果表明:纵横载荷共同作用下,功能梯度梁的弯曲构形将有无限多个;随着梯度指数的增大,梁的变形减小,临界载荷升高;随着长高比的增大,横向剪切变形的影响减小。     

Bending of cantilever rectangular plates with the effect of transeverse shear deformation

On the basis of Reissner's theory, the exact solutions of the bending of cantilever rectangular plates are obtained by means of the concept of generalized simply-supported boundary. From the results obtained, it can be found that the method is valid.     

The bending of elastic circular ring of non-homogeneous and variable cross section under the actions of arbitrary loads

On the basis of the stepped reduction method suggested in [1], we investigate the problem of the bending of elastic circular ring of non-homogeneous and variable cross section under the actions of arbitrary loads. The general solution of this problem is obtained so that it can be used for the calculations of strength and rigidity of practical problems such as arch, tunnel etc. In order to examine results of this paper and explain the application of this new method, an example is brought out at the end of this paper. Circular ring and arch are commonly used structures in engineering. Timoshenko, S.^[2], Barber, J. R.^[3], Tsumura Rimitsu^[4] et al. have studied these problems of bending, but, so far as we know, it has been solely restricted to the general solution of homogeneous uniform cross section ring. The only known solution for the problems with variable cross section ones has been solely restricted to the solution of special case of flexural rigidity in linear function of coordinates. On account of fundamental equations of the non-homogeneous variable cross section problem being variable coefficients, it is very difficult to solve them. In this paper, we use the stepped reduction method suggested in [1] to transform the variable coefficient differential equation into equivalent constant coefficient one. After introducing virtual internal forces, we obtain general solution of an elastic circular ring with non-homogeneity and variable cross section under the actions of arbitrary loads.     

Exact solution for in-plane static problems of circular beams made of functionally graded materials

Exact analytical solutions of in-plane static problems of circular beams with uniform cross-section made of functionally graded material (FGM) are obtained. Material properties are assumed to be varying arbitrarily through the thickness. The effects of axial extension and shear deformations are considered. The differential equation system is solved exactly using the initial values method. The circumferential stress distribution on the cross-section is also obtained. The results are compared with those of rather complex approaches in the literature, such as elasticity approach, and the comparison shows an excellent agreement. Effects of power law exponent and radius-to-height ratio of the beam on circumferential stress distribution and displacements are investigated.     

Approximated-asymptotic solution of the complex variable equation of toroidal shells under axial symmetric loads

The series-approach and the asymptotic-approach are usually used to solve the complex variable equation of the toroidal shells under axial symmetric loads. As is known, the convergence of the series-solution is good only for small values of . On the other hand, the convergence of the asymptotic solution is good only for large values of μ. In this paper, based on an earlier work^[1], a new approach which may be called the approximated-asymptotic solution has been developed and it is valid for both small and large values of μ. It is shown that the results of the approximated-asymptotic solution for toroidal shell with μ=0.5 coincide very well with those of the series-solution, while the results of the asymptotic solution for this value of μ are not as good, and the results of the approximated-asymptotic solution for μ=15 agree with those of the asymptotic solution. This work has been carried out under the direction of Professor Zhang Wei.     

关于"平面弹性悬臂梁剪切挠度问题"的进一步研究

对于狭矩形截面的平面弹性悬臂短梁,给出了悬臂端受切向外力或一边受均匀载荷作用时精 确的有限元结果和DQ (differential quadrature, 微分求积法) 法结果作为比较依据;基于铁摩辛柯梁理论并采用Gowper导出的剪切系数,导出了与弹性力 学解精度相当的结果.     

基于剪切变形的矩形梁剪力滞求解方法

Timoshenko梁通过假设截面的剪切刚度和附加平均剪切转角变形的方式来近似修正初等梁中未考虑剪切变形能的问题,这与梁剪应力沿梁高变化的实际不符。本文基于材料力学剪应力计算式和相应的剪切变形理论,从剪切变形与梁的位移关系入手,导出矩形梁考虑剪切变形时的纵向位移沿梁高方向的函数关系式,证明该位移可分解为纯弯曲引起的位移和剪力引起的剪力滞翘曲位移之和。应用剪力滞广义坐标与广义力的概念,基于能量变分原理得到等截面梁剪力滞控制微分方程组及其通解形式。对均布荷载作用下矩形简支梁的算例分析表明,本文算法与弹性力学精确解对比,两者的应力和挠度剪力滞系数求解结果非常接近,本文算法有足够的精度,且比弹性力学简单。     

New truncated expansion method and soliton-like solution of variable coefficient KdV-MKdV equation with three arbitrary functions

The truncated expansion method for finding explicit and exact soliton-like solution of variable coefficient nonlinear evolution equation was described. The crucial idea of the method was first the assumption that coefficients of the truncated expansion formal solution are functions of time satisfying a set of algebraic equations, and then a set of ordinary different equations of undetermined functions that can be easily integrated were obtained. The simplicity and effectiveness of the method by application to a general variable coefficient KdV-MKdV equation with three arbitrary functions of time is illustrated.     

A finite difference method at arbitrary meshes for the bending of plates with variable thickness

A finite difference method at arbitrary meshes for the bending of plates with variable thickness is presented in this paper.The method is completely general with respect to various boundary conditions,load cases and shapes of plates.This difference scheme is simple and the numerical results agree well with those obtained by other methods.     

The approximate analytical solution for the buckling loads of a thin-walled box column with variable cross-section

1.IntroductionThin-walledboxcolumnswithvariablecross-sectionareextensivelyusedascompressionmembersforhighbridgepiers,waterandtelevisiontowersandothersimilarstructures.Atpresent,however,fewpapersdealingwiththecriticalloadsoftorsional-fie-curalbucklingforthiskindofstructurescanbeseen.Inthispaper,bymeansoftheenergyprincipleandtheGalerkin'smethod,theapproximateexpressionsforcalculatingthecriticalloadsoffie-curalandtorsionalbucklingaredevelopedrespectively.Anapplicablecomputerprogramisworkedout,an…     

The existence of solution to the finite elastodynamics with mixed boundary conditions

I.IntroductionIn[5,6]Ebinetelconsideredcarefullytheinitial-valueproblemsoftheimcompressibleelastodynamicsforpartfreeboundary,partdisplacementboundaryconstraints.Theinitialvalueproblemsofthequasilinearhyperbolicpartialdifferentialequationsrelatedwiththeabovefiniteelastodynamicshavebeenalsoconsideredin[3,4,8,9]bymanyauthorswhentheelasticitytensorsatisfysomeconditions.Someimportantconclusionsabouttheexistenceofsolutiontoabovesystems(equations)wereobtained.Inthispresentpapertheexistenceofsolution…     

Nonlinear bending of the shallow spherical shells with variable thickness under axisymmetrical loads

Based on the differential equation of the nonlinear bending of shallow sphericalshells with variable thickness under axisymmetrical loads,this paper studies thenumerical solution of the nonlinear differential equation by means of interpolatingmatrix method.The analysis of the results indicates that the suggested method is easyto implement and obtains the same high accuracy for both the displacements and theinternal forces.     

用材料力学公式计算任意截面短梁正应力时的修正项研究

对材料力学中梁的弯曲应力公式增加一修正项,以反映短梁弯剪翘曲变形对应力分布的影响。提出一种根据短梁横截面边界形状及艾瑞应力函数求解应力修正项的方法,应用弹性力学空间问题的一般理论,通过应力平衡方程、应变相容方程及应力边界条件,建立了关于任意截面短梁的应力修正项及剪应力的基本方程。在所建立的基本方程基础上,导出了矩形截面和圆形截面短梁修正应力的具体计算公式,该修正应力与均布荷载大小及弹性模量与剪切模量之比均成正比,但与截面惯性矩成反比。数值算例表明,本文方法计算的应力与通用有限元软件ANSYS计算的结果吻合良好,从而验证了本文方法及其基本公式的正确性。     

Navier solution for the elastic equilibrium problems of anisotropic skew thin plate wite variable thickness in nonlinear theories

This paper discusses the elastic equilibrium problems of anisotropic skew thin plate ofvariable thickness simply supported on all four sides in nonlinear theories,and uses theNavier method to seek an approach to the problem,and to illustrate the solution with theexamples.In conclusion,the mention is made of the scope of application and theconvergency of the solution.