直观推导式演进特征投影法解析多环芳烃的重叠色谱峰

用高效液相色谱法(HPLC)测定多环芳烃时,因芴、苊和菲,茚(1,2,3-cd)芘和苯并(g,h,i)苝的色谱峰严重重叠而影响测定结果。本研究用高效液相色谱-二极管阵列检测器(DAD)和荧光检测器(FLD)测定多环芳烃,在激发波长λex=230nm,发射波长λem=300～500nm范围内采集重叠峰的HPLC-FLD二维色谱数据,再用直观推导式演进特征投影法(HELP)解析它们的重叠色谱峰,分辨结果令人满意。该方法对重叠组分的分辨下限为0.02mg/L。结果表明,用二维色谱荧光数据解析色谱重叠峰,灵敏度更高,可用于环境样品中多环芳烃的测定。     

香港大气颗粒物中多环芳烃的 HELP 法解析

利用新近发展的直观推导式演进特征投影法(HELP),成功地对香港大气颗粒物样本中的多环芳烃化合物进行了定性定量解析.解析结果表明:在样本中存在47种化学成分,其中有18种为多环芳烃化合物及其衍生物.分辨结果与标准光谱吻合很好,并与GC-MS的定性分析结果相一致.在定性分析的基础上,还进行了定量分析.HELP方法大大降低了对色谱分离条件的要求,为今后快速、准确解析色谱光谱联用仪器产生的二维数据提供了崭新途径.     

二维色谱/光谱重叠峰的定性定量方法研究(Ⅱ)——投影降秩分辨法与大气飘尘中多环芳烃的测定

提出了一种新的联用色谱定性定量方法--投影降秩分辨法.该法可不经对重叠组分的逐一分辨直接对目标组分进行定性定量分析.以实际分析体系大气飘尘中多环芳烃菲、蒽、萤蒽和芘为目标组分,成功地进行了直接定性定量分析.     

结合直观推导式演进特征投影法分析原油中非烃结构和含量

提出一种分析原油非烃结构和含量的方法。用直观推导式演进特征投影法分辨有关二维数据以获得非烃的纯色谱和纯质谱,再将所获质谱在标准质谱库中检索,并结合色谱保留指数分析等来进行单个非烃化合物结构鉴定;利用实验数据,根据分辨获得的纯色谱峰面积所建立的规一化模型,进行非烃化合物定量分析。用本法确定了一原油样品中168个含氮化合物和该油样一个馏分中60个其它非烃化合物的结构和含量。本方法具有系统分析原油非烃结构和含量的通用性;标准化合物加标回收实验表明,其准确度很好。     

直观推导式演进特征投影法在拖尾重叠色谱峰解析中的应用

直观推导式演进特征投影法(HELP)已成功应用于复杂体系的重叠色谱峰解析.当色谱峰拖尾时,演进特征投影图(ELPG)显示的直线段对应的区域中可能含有前面拖尾组分的信息,据此进行HELP解析可能得不到满意结果.选择ELPG上直线段的一部分,即拖尾组分末端,前面组分的信息已基本消失的区域作为选择性区域进行HELP解析.同时,提出一种新的定量方法:用主成分分析法(PCA)分解待测组分标准样品的二维数据,将得到的“标准”色谱引入HELP的定量过程,在色谱峰拖尾或解得谱峰不平滑时,得到更准确的结果.用HELP方法解析了依诺沙星、诺氟沙星和环丙沙星三组分实验体系,结果表明,加入上述措施的HELP可有效改善拖尾重叠色谱峰的解析结果.     

伊敏煤田伍牧场矿区煤中多环芳烃分布特征

伊敏煤田伍牧场矿区储藏着丰富的煤层，有从褐煤至瘦煤连续变化的系列煤样。对该煤系样品索氏抽提物中芳烃馏分进行ＧＣ／ＭＳ分析，取得从萘系至ｍ／ｅ４９６分子量的一个系列的芳烃分布数据。煤中多环芳 鉴定是通过气相色谱的保留指数，质量色变和质谱多个方面考证而定出本系列样品中５７个化合物的同系物。     

直观推导式演进特征投影法分辨枸杞类胡萝卜素的异构体

采用高效液相色谱-二极管阵列检测方法,初步分离了枸杞子中的类胡萝卜素。以乙腈-二氯甲烷(体积比为60∶40)为流动相,流速为1.0 mL/min,用C18柱从枸杞类胡萝卜素中分离出7个峰。但由于类胡萝卜素的结构多样性,尤其是顺反异构体的出现使得分离并不完全。利用所得三维数据提供的信息和化学计量学方法直观推导式演进特征投影法(HELP),对其中某些在二维色谱中被定性为单组分的峰进行解析,结果发现原来在二维色谱中被定性为单组分的峰大多是一些多组分峰。以其中第4个峰为例对其进行解析,得到了该类胡萝卜素的同分异构体色谱流出曲线及紫外光谱信息。该方法表明,化学计量学方法与现代分析手段有机结合,大大降低了此类复杂体系对色谱分离的要求,对同分异构体的分析具有一定的借鉴和指导意义。     

直观推导式演进特征投影法对酶催化反应的过程分析

以丁香酸(syringic acid)为模型化合物, 研究了漆酶(laccase)催化降解木质素(lignin)的复杂生化反应过程, 设计了一种反应过程动态量测系统, 该系统可以在5 s的时间间隔测定反应体系在190～800 nm波长范围内的实时光谱信息. 利用固定窗口因子分析-直观推导式演进特征投影法(FSMWEFA-HELP), 解析反应过程中测得的实时动力学光谱数据矩阵, 得到反应物和中间体的数目及其浓度的变化和纯物质的光谱曲线, 并推导出合理的反应机理. 将所得结果与多元曲线分辨-交替最小二乘(MCR-ALS)方法进行了比较.     

二维色谱／光谱重叠峰的定性定量方法研究（Ⅰ）：水中多种酚二维色谱／ …

探讨了ＨＥＬＰ法在水中酚类色谱重叠峰的分辨与定性定量分析中的应用。实验结果表明，各组分浓度比为１：５０的范围内分辨光谱与真实光谱十分吻合。     

气质联用仪法测定奶粉中多环芳烃

研究了奶粉中多环芳烃的气相色谱/质谱(GC/MS)测定方法. 样品经甲醇-KOH皂化后用甲苯提取, 提取液经微孔滤膜过滤后用气相色谱质谱仪测定其含量, 外标法定量. 结果16种PAHs的回收率范围为92.0%～106%;RSD为2.2%～4.7%. 方法能同时分离16种PAHs, 适合于奶粉中多环芳烃的分析测定.     

Analysis of PAHs in air-borne particulates in Hong Kong City by heuristic evolving latent projections

Ｔｈｅａｎａｌｙｓｉｓｏｆｕｎｋｎｏｗｎｃｏｍｐｌｅｘｒｅａｌｓａｍｐｌｅｓ,ｓｕｃｈａｓｂｉｏｌｏｇｉｃａｌｐｒｏｄｕｃｔｓ,ｎａｔｕｒａｌｍｅｄｉｃｉｎｅｓ,ｅｎｖｉｒｏｎｍｅｎｔａｌｓａｍｐｌｅｓ,ｅｔｃ.,ｐｌａｙｓａｎｉｍｐｏｒｔａｎｔｒｏｌｅｉｎｂｉｏｃｈｅｍｉｓｔｒｙ,ｐｈａｒｍａｃｅｕｔｉｃａｌｃｈｅｍｉｓｔｒｙ,ｅｎｖｉｒｏｎｍｅｎｔａｌｃｈｅｍｉｓｔｒｙａｎｄｏｔｈｅｒｆｉｅｌｄｓ.Ｉｔｈａｓｂｅｃｏｍｅｏｎｅｏｆｔｈｅｈｏｔｓｐｏｔｓａｎｄｄｉｆｆｉｃｕｌｔｐｏｉｎｔｓｉｎｍｏｄｅ…     

Characterization of polycyclic aromatic hydrocarbons in environmental samples by selective fluorescence quenching

Selective fluorescence quenching is used to profile polycyclic aromatic hydrocarbons (PAHs) in samples of environmental origin. After separation by high-efficiency capillary liquid chromatography, the PAHs are detected by laser-induced fluorescence spectroscopy. Nitromethane is added to selectively quench the fluorescence of alternant PAHs, whereas diisopropylamine is added to quench nonalternant PAHs. The chromatograms in the absence and presence of fluorescence quenching are evaluated by means of the product moment correlation method to quantify the statistical similarities and differences. This method is demonstrated by application to three samples: a standard mixture of 16 priority pollutants, a coal-derived fluid, and a contaminated soil. The correlation coefficients (r) are typically 0.99 or higher for samples that are identical in origin, 0.90-0.50 for closely related samples, and less than 0.50 for samples that are distinctly unrelated. This method can be used to confirm with high statistical confidence the cause or source of an event with environmental impact, such as an oil leak or spill, contamination or waste by-products from petroleum fuel production and processing, etc.     

一次性固相微萃取-高效液相色谱法测定环境水样中的3种多环芳烃

以涂有聚二甲基硅氧烷(PDMS)的石英光导纤维作为固相微萃取纤维,建立了一次性固相微萃取与高效液相色谱联用测定环境水样中的菲、荧蒽和屈3种多环芳烃(PAHs)的方法。实验考察了解吸时间、萃取时间、搅拌速度、盐效应以及样品溶液pH值对萃取效率的影响,优化得到的萃取和解吸条件为: 于60 mL样品溶液中放入两段萃取纤维(1.5 cm)和1.2 g氯化钠,在1200 r/min搅拌速度下萃取60 min,取出萃取纤维并转入120 μL甲醇中密封静置解吸24 h后,取20 μL解吸液进行液相色谱测定。该方法对于菲、荧蒽和屈的检出限分别为0.17、0.17和0.08 μg/L;精密度(以测定0.5 μg/L PAHs标准溶液6次的相对标准偏差计)小于8%;实际样品中3种PAHs的加标回收率为80.0%～107%。该方法快速简便,纤维一次性使用,克服了污染物在纤维上残留的问题。     

Monofluorinated analogues of polycyclic aromatic hydrocarbons as internal standards for GC-MS in environmental analysis

Summary In the gas chromatographic determination of polycyclic aromatic hydrocarbons (PAHs), internal standards (ISs) are frequently used in order to correct for losses and fluctuating experimental parameters. In this study eight monofluorinated PAHs (F-PAHs) are used to this end. Analysis was by means of large-volume injection-gas chromatography with mass spectrometric detection (LVI-GC-MS). Relevant experimental results and performance data are presented, and it is demonstrated that the use of at least one F-PAH as IS improves the repeatability dramatically. As a brief application, F-PAHs were used as ISs for the trace-level determination of PAHs in soil, after extraction by means of pressurized liquid extraction (PLE) and liquid partitioning (LP). The suitability of the approach was demonstrated with naphthalene and pyrene as test compounds.     

Oxidation of polycyclic aromatic hydrocarbons catalyzed by soybean peroxidase

Soybean peroxidase (SBP) catalyzes the oxidation of a variety of polycyclic aromatic hydrocarbons (PAHs) in the presence of water-miscible organic cosolvents, including acetonitrile, tetrahydrofuran, and dimethylformamide (DMF). Oxidation was optimal at pH 2.0–2.5, with substantially lower reactivity at pH 1.5 as well as at pH > 3.0. Despite the low pH activity optimum, SBP had an observed half-life of 120 h at pH 2.5. Conversions of greater than 90% were observed with anthracene and 9-methylanthracene in the presence of 50% (v/v) DMF. Anthracene oxidation yielded exclusively anthraquinone, thereby demonstrating that SBP catalyzes a formal six-electron oxidation of the unactivated aromatic substrate to the quinone. A mechanism is proposed to account for this reaction that includes the initial one-electron oxidation of the PAH followed by addition of water to the oxidized PAH. 9-Methylanthracene was more reactive than anthracene, and its enzymatic oxidation yielded two products: anthraquinone and 9-methanol-9,10-dihydroanthracene. The former product indicates that loss of the methyl group occurs during enzymatic oxidation. These results suggest that SBP could be useful in the conversion of PAHs into more environmentally benign materials.     

Polyaniline-coated magnetite nanoparticles incorporated in alginate beads for the extraction and enrichment of polycyclic aromatic hydrocarbons in water samples

A magnetic solid-phase extraction sorbent consisting of polyaniline-coated magnetite nanoparticles entrapped in alginate beads (PANI/alginate/Fe₃O₄) was successfully synthesised and applied for the extraction and preconcentration of polycyclic aromatic hydrocarbons (PAHs) in water samples. The magnetite nanoparticles helped to provide an easy and rapid isolation of the sorbent from the sample solution using an external magnet. The alginate beads helped to increase the surface area for polyaniline coating. The polyaniline-coated alginate/magnetite composite helped to increase the extraction efficiency due to the π–π interactions between the polyaniline and the PAHs. Various parameters that affected the extraction efficiencies were optimised including the polymerisation time, the amount of sorbent, sample pH, extraction time, ionic strength, and desorption conditions. Under the optimal conditions, a linear response was achieved in the concentration range of 0.040–50.0 µg L^?1, and the limit of detection was 0.010 µg L^?1. This simple, convenient, cost-effective, and environmentally friendly method was successfully applied for the extraction and enrichment of PAHs in water samples. The recoveries ranged from 86.0% to 97.8% with a relative standard deviation <10 %.     

中药丹参高效液相色谱重叠峰的解析

采用超临界CO2萃取方法对丹参中的脂溶性成分进行提取，利用高效液相等度分离方法对丹参脂溶性成分进行分离，再结合启发渐进式特征投影法和固定尺寸移动窗口渐进因子分析法对未能完全分离的重叠峰进行解析，得到了比较满意的结果。     

气相色谱-质谱法测定热塑性弹性体中的多环芳烃

建立了一种简单、准确的测定热塑性弹性体中16种多环芳烃(PAHs)的气相色谱-质谱(GC-MS)方法。考察了样品制备、萃取溶剂、萃取方法、时间以及温度对厂家制备的阳性热塑性弹性体样品中PAHs提取效率的影响,确定了萃取条件和方法。样品经甲苯超声萃取、浓缩后用环己烷溶解、二甲亚砜液液萃取净化后采用GC-MS进行分析,内标法定量。通过对不同材质阳性热塑性弹性体样品的加标回收、精密度试验等对建立的方法进行评价,16种PAHs的平均回收率为70%～117%,精密度为0.2%～10.8%。该方法适合于热塑性弹性体中PAHs的测定。