高反式1,4-聚异戊二烯合成的新方法

<正> 反1,4-链节含量接近100％的聚异戊二烯(TPI)具有天然杜仲胶或古塔胶的结构和性能,结晶熔点60—65℃,被认为是作为形状记忆功能材料,如医用矫形材料、各种温敏变形材料的最理想聚合物。关于TPI的合成路线,国外报道主要有V体系(VCl_3/AlEt_3及其负载改性型)和V-Ti混合体系(VCl_3/β-TiCl_3/AlEt_3和Ti(OR)_4/     

低相对分子质量反式-1,4-聚异戊二烯蜡的合成

负载钛催化剂;催化剂;钛;配位聚合;氢气;低聚物;低相对分子质量反式-1;4-聚异戊二烯蜡的合成     

高反式-1,4-丁二烯-异戊二烯共聚橡胶在轿车轮胎带束层中的应用研究

研究了高反式-1,4-丁二烯-异戊二烯共聚橡胶(TBIR)的生胶性能及其在轿车轮胎带束层中的应用。结果表明,随丁二烯单体单元含量增加,TBIR生胶的玻璃化转变温度、结晶熔融焓、生胶强度和硬度逐渐降低。硫化胶性能测试表明,TBIR硫化胶的定伸应力、回弹性能以及耐老化性能优于NR硫化胶,TBIR-40硫化胶的拉伸强度和撕裂强度明显高于NR硫化胶。采用10~30份TBIR取代NR应用于轿车轮胎带束层配方,并用硫化胶拉伸强度、拉断伸长率、撕裂强度和钢丝帘线抽出力处于较高水平,定伸应力、硬度、回弹性能和耐老化性能较对比胶提高,含TBIR的轮胎带束层胶料具有更加优异的综合性能。DMA结果表明,NR与TBIR相容性较好,NR/TBIR并用硫化胶具有更低的内耗。TEM结果表明,NR/TBIR并用胶具有较好的填料分散性。     

反式-1,4-丁二烯-异戊二烯共聚橡胶改性的高性能轿车轮胎胎面胶的结构与性能

研究了新一代合成橡胶-反式-1,4-丁二烯-异戊二烯共聚橡胶(TBIR)在高性能轿车轮胎胎面胶(溶聚丁苯橡胶/顺丁橡胶(SSBR/BR))中的应用及SSBR/BR/TBIR共混胶的结构与性能.结果表明,相对于无定型的SSBR和BR,TBIR由于具有一定的结晶性而呈现出较高的生胶强度、模量和韧性.但相比反式聚异戊二烯(TPI),由于丁二烯单体单元的引入降低了聚合物链的结构规整性,TBIR的结晶熔融焓、熔点和玻璃化转变温度均明显降低.采用10~20份TBIR与SSBR/BR并用改性,同时加入30份炭黑和45份白炭黑,SSBR/BR/TBIR混炼胶的格林强度和定伸应力提高,焦烧时间(tc10)和工艺正硫化时间(tc90)基本保持不变.SSBR/BR/TBIR混炼胶经过150oC硫化反应,制备的硫化胶物理机械性能优异,抗拉伸疲劳性能提高4.6~6.3倍,压缩强度提高21.4%~23.1%,耐磨耗性能提高10.8%~15.1%,耐湿滑性能提高13.6%~40.4%,滚动阻力维持不变.填料分散仪和透射电镜(TEM)结果表明,相比SSBR/BR硫化胶,SSBR/BR/TBIR硫化胶填料分散度提高7.3%~14.9%,填料聚集体平均尺寸降低1.4~2.7μm.可结晶的TBIR的高生胶强度及模量可显著抑制混炼胶中填料的聚集,改善硫化胶中填料的分散性,最终贡献于SSBR/BR/TBIR硫化胶优异的抗拉伸疲劳性、高的耐磨性、抗湿滑性、压缩强度、定伸模量等性能,TBIR是应用于高性能轿车轮胎胎面胶的一种理想新合成橡胶.     

负离子聚合制备环氧化八臂星形聚异戊二烯及其表征

利用仲丁基锂引发异戊二烯进行高真空负离子聚合制备聚异戊二烯基锂活性链(PI-Li),再与八乙烯基多面体齐聚倍半硅氧烷(OVPOSS)在环己烷中发生加成反应,一步法制得八臂星形聚合物.利用分级沉淀去除稍过量的的线型聚异戊二烯以及低加成产物,即可得到纯的八臂星形聚异戊二烯(8PI-POSS).最后,通过甲酸/过氧化氢对8PI-POSS中的聚异戊二烯链进行部分氧化反应,获得环氧化八臂星形聚异戊二烯(8EPI-POSS).利用核磁共振波谱(~1H-,~(13)C-NMR)、凝胶渗透色谱(GPC)、傅里叶变换红外光谱(FTIR)和基质辅助激光解吸电离飞行时间质谱(MALDI-TOF MS)对聚合物的化学结构、分子量及分子量分布进行表征.实验结果表明,通过调节单体与引发剂的摩尔比,成功合成了不同聚合度的8PI-POSS和8EPI-POSS;并且通过改变氧化反应的温度和时间以及氧化试剂的用量,可以简易改变8EPI-POSS的环氧度.最后,通过热失重分析(TGA)测试了几种聚合物的热分解温度,结果显示,PI均聚物在200oC左右开始分解,而由于POSS的引入,8PI-POSS和8EPI-POSS在340oC左右才开始分解,并且与PI均聚物相比,在800oC还有大概3%的残留组分.     

1-己烯环氧化合成1,2-环氧己烷研究进展

1,2-环氧己烷是一种具有高附加值的有机化工中间体,广泛应用于聚醚多元醇、非离子表面活性剂和破乳剂等的合成。本文比较了不同氧化体系下1-己烯合成1,2-环氧己烷的反应历程及优缺点,重点介绍了近年来不同1-己烯环氧化催化体系方面的研究进展,包括钛硅分子筛、金属配合物、多金属氧酸盐、金属氧化物、光催化剂、生物催化剂等。指出以过氧化氢/烷基过氧化物为氧化剂的环氧化反应路线是目前最具工业化应用前景的环境友好路线,开发高效稳定的催化剂是未来研究的重点。     

聚氨基酸接枝聚异戊二烯的仿生合成与性能

通过硫醇-烯点击反应将2-氨基乙硫醇接枝到聚异戊二烯主链上合成带有氨基侧链的聚异戊二烯,再通过侧链氨基引发L-缬氨酸-N-硫代羧基内酸酐(Val-NTA)单体和β-苯丙氨酸-N-硫代羧基内酸酐(β-Phe-NTA)单体的聚合,制备出2种方式改性的聚异戊二烯.其中,Val-NTA聚合接枝聚异戊二烯的拉伸强度28.6 MPa,300%定伸强度18.9 MPa,相比天然橡胶分别提升10.7%和9.3%. β-Phe-NTA聚合接枝聚异戊二烯的拉伸强度28.0 MPa,比天然橡胶提升8.3%.     

锰配合物催化1,3-丁二烯环氧化合成环氧丁烯

合成了N,N′-dimethyl-N,N′-bis(2-pyridylmethyI)ethane-1,2-diamine(mep)及其相应的锰配合物,并将其锰配合物用于1,3-丁二烯的环氧化反应,高选择性的合成单环氧化合物环氧丁烯,考察了各因素对反应的影响,在优化的条件下能达到90%左右的收率和大于99%的选择性.在该...     

聚异戊二烯-丝胶接枝共聚物的合成与性能研究

以异丙苯过氧化氢和四乙烯五胺为氧化还原对引发剂,通过乳液聚合合成了聚异戊二烯接枝丝胶乳液(PL-g-SS),其结构和性能经NMR,TEM及激光粒度分析表征.结果表明:丝胶成功地接枝到聚异戊二烯上;PL-g-SS双亲纳米微球具有明显的PL为核,SS为壳的核壳结构,平均粒径48nm,且粒径分布较为均匀.采用杂凝聚法将PL-...     

羟基聚醚官能化杂多酸聚离子液体催化的连续酯化氧化合成环氧油酸甲酯

以乙二醇、环氧氯丙烷、三甲胺、三乙胺、三乙醇胺、H₄SiW₁₂O₄₀、H₃PW₁₂O₄₀为起始原料,经开环聚合、季铵化、分子自组装,构建了系列羟基官能化聚醚杂多酸聚离子液体HPIL-1～HPIL-6。聚离子液体兼具两亲活性、酸催化活性和氧化催化活性,以其为非均相催化剂,实现了油酸连续酯化、环氧化合成环氧油酸甲酯。当原料比n(甲醇)∶n(H₂O₂)∶n(油酸)∶n(聚离子液体)=500∶120∶40∶1,室温下酯化反应2.5h, 65℃下环氧化反应4h,环氧油酸甲酯产率92%。聚离子液体经离心分离、溶剂洗涤、真空干燥即可再生循环使用,循环使用5次,催化活性基本保持不变。     

反式异戊橡胶合金改性溶聚丁苯橡胶/顺丁橡胶轿车胎面胶

研究了反式异戊橡胶合金(TPIR)的结晶性能、加工性能和力学性能及在轿车胎面胶溶聚丁苯橡胶/顺丁橡胶(SSBR/BR)中的应用.研究结果表明,与无定形SSBR和BR相比,TPIR生胶具有常温可结晶性,因此TPIR具有较高的格林强度.毛细管挤出行为研究结果表明,TPIR具有优异的挤出性能,挤出物外观光滑,挤出涨大比小.与SSBR/BR混炼胶相比,用TPIR改性后的SSBR/BR/TPIR混炼胶的格林强度与100%定伸应力随TPIR含量的增加而提高.经150℃硫化反应后制备的SSBR/BR/TPIR硫化胶物理机械性能优异:不仅耐湿滑性能、耐磨耗性能及压缩强度较对比胶提高,其伸张疲劳性能较对比胶提高4倍以上.透射电子显微镜(TEM)及填料分散仪表征结果表明,与SSBR/BR硫化胶相比,SSBR/BR/TPIR硫化胶的填料聚集体平均尺寸降低2μm,填料分散性显著改善.表明TPIR是一种应用于高性能轿车胎面胶的理想胶料.     

Fabrication of <Emphasis Type="Italic">trans</Emphasis>-1,4-polyisoprene nanofibers by electrospinning and its crystallization behavior and mechanism

Trans-1,4-polyisoprene (TPI) nanofibers have been fabricated successfully through electrospinning technology. Through the control of electrospinning parameters, highly crystallized TPI fresh fibers composed mainly by β phase were produced. Morphology and diameter of TPI nanofibers can be controlled by adjusting the electrospinning conditions. The in situ observations of FTIR spectra revealed that the crystallinity of the TPI fibers decreased with aging. While for TPI nanofibers aging at 45 °C for 24 h, a decrease in crystallinity as well as β to α transformation was observed with aging and these changings happened in the first 50 h during aging. The mechanism for β-TPI formation during electrospinning process and the reduced crystallinity with aging were proposed.     

NMR and DSC investigations of the miscibility of blends of cis-1,4-polyisoprene with polybutadienes of different microstructures

Differential scanning calorimetry and torsional braid analysis investigations of the phase diagram of cis-1,4-polyisoprene/polybutadiene blends as a function of the polybutadiene microstructure were reported by several authors. Polybutadienes containing a high vinyl content were shown to be miscible with cis-1,4-polyisoprene on the DSC spatial scale, whereas polybutadienes containing a low vinyl content were immiscible. In this article, we used variable-temperature determinations of ¹H NMR free induction decays and low-temperature, high-resolution solid-state ¹³C NMR measurements of proton spin-lattice relaxation times in the rotating frame to probe the phase behavior of the cis-1,4-polyisoprene/polybutadiene blends at the smaller spatial scale of the NMR technique. Blends of cis-1,4-polyisoprene with a polybutadiene having a large number of vinyl 1,2 linkages appeared to be miscible on the molecular scale, in spite of small regions in which the polybutadiene component is not uniformily dispersed in the other polymer. On the contrary, blends in which the polybutadiene has a low content of vinyl 1,2 sequences were phase separated over the whole temperature range considered and no intermixed regions could be detected. The limiting case was observed with the polybutadiene containing 33 wt % vinyl 1,2 units, for which miscibility on a molecular scale is highly dependent on the blend composition. © 1995 John Wiley & Sons, Inc.     

硫化反式聚异戊二烯电子性质的理论化学研究

应用量子化学计算方法,对反式聚异戊二烯本征态和硫化态结构的能量及电子性质等进行了计算.结果表明,当聚异戊二烯掺杂硫后,相邻两链之间的距离a⊥变窄,体系的总能量降低,从而使整个掺杂体系更加稳定.另外,在硫化聚异戊二烯分子中,S原子位于两个相邻聚异戊二烯链之间,并偏向于其中一个分子链的C C双键的一侧,即与相邻两链中相对应的两个C C双键形成π-p-π共轭体系,增加了电子在两个聚异戊二烯链间的流动性,从而使硫化的反式聚异戊二烯更加稳定.另外,根据固体能带理论,采用量子化学EHMO方法,对反式聚异戊二烯本征态和硫掺杂态的能带结构进行了计算,根据硫化前后能隙和带宽的变化,解释了反式聚异戊二烯掺杂后呈现电导率各向异性的原因.     

一种简便合成2-丁炔-1,4-二醇衍生物的新方法

由2-丁炔-1,4-二醇可以很方便地得到2-丁炔-1,4-二氯,这一试剂在有机合成中有着广泛的应用。而在其它条件相同的情况下,制备2-丁炔-1,4-二溴并未得到相应较好的结果。我们用无水苯为反应溶剂,以温和的 (PPh3)PBr2作为卤代试剂(冰浴下液溴逐滴滴入PPh3苯溶剂中当场生成)卤化2-丁炔-1,4-二醇,选择性合成得到2-丁炔-1,4-二溴衍生物。同时也实现了2-丁炔-1,4-二醋酸酯的合成。     

吡啶并[1,4]噁嗪衍生物的合成新方法--酰胺溴代吡啶的分子内偶联

描述了一个方便制备吡啶并1，4-噁嗪衍生物的合成新方法，该法通过分子内偶联构建了噁嗪环系统。     

Synthesis and Crystal Structure of a New Lead Coordination Polymer： [Pb（L）（1,4-ndc）]

The title coordination polymer, [Pb(L)(1,4-ndc)] 1 (L = 2-(4-fluorophenyl)-1Himidazo[4,5f1,10]phenanthroline, 1,4-ndc = naphthalene-1,4-dicarboxylic acid), has been obtained by using hydrothermal synthesis and characterized by elemental analysis, IR and singlecrystal X-ray diffraction. It crystallizes in monoclinic, space group P21/c with a = 10.1043(11), b = 14.3162(15), c = 17.6061(18), β = 95.3990(10)°, V = 2535.5(5)3, Z = 4, C31H17FN4O4Pb, Mr = 735.68, Dc = 1.927 g/cm3, F(000) = 1416, μ(MoKa) = 6.709 mm-1, R = 0.0201 and wR = 0.0489. The 1,4-ndc dianions link neighboring Pb(II) atoms in a bis-chelating mode, yielding a one-dimensional chain structure along the c axis. The C–H···π interactions between the carbon atom of L ligand and the benzene ring of 1,4-ndc lead the one-dimensional chains to form a two-dimensional supramolecular layer. The π-π interactions between L ligand and 1,4-ndc ligand make the two-dimensional layers generate a three-dimensional supramolecular architecture. Additionally, the N–H···O hydrogen bonds further stabilize the structure of 1.     

导电高聚物聚对二噻萘的电子能带

目前所研究的导电聚合物大都是一维或准一维链,显示出一系列独特的电、磁及光学特性,理论化学工作者们认为,对聚合物能带结构的透澈了解是认识其导电性及其它各种性能所必需的,本文将对新合成的导电高分子材料——聚对二噻萘(简称PDTN)进行电子能带计算,在计算中将PDTN视为准一维体系,所用方法为EHMO/CO半经验计算方法,为便于比较,还用相同方法计算了聚苯硫醚(简称PPS)的电子能带。     

苯二胺和联苯二胺类叔芳胺的合成及发光性能的研究

N,N′-二苯基-1,4-苯二胺和N⁴,N^4'-二苯基-4,4'-联苯二胺分别与芳基溴在Pd(OAc)₂/P(t-Bu)₃催化下于120 ℃邻二甲苯溶液中反应生成苯二胺和联苯二胺类叔芳胺有机电致发光材料, 这些化合物的熔点都在300 ℃以上. 产物的结构经¹H NMR, ¹³C NMR, ¹³C (DEPT), MS (HREI和EI)表征. 用UV-Vis, PL, DSC测定了苯二胺和联苯二胺类叔芳胺化合物的发光性能.     

Effect of Substrates on the Addition Polymerization of 1,4-Benzenedithiol to 1,4-Diethynylbenzene in the Solid State and the Electronic Properties of the Resulting Polymer

The effect of substrates on the addition polymerization of 1,4-benzenedithiol (BDT) to 1,4-diethynylbenzene (DEB) in the solid state and the electronic properties of the polymers obtained were studied. As the substrate polymer sheets, for instance, PET (poly (ethylene terephthalate)) sheet, ON-6 (oriented nylon-6) sheet and so on having surface free energies Γ_s from 27.4 to 55.0 erg/cm² were used. At the monomer sublimation temperature of 60°C, the S wt% (sulfur content) and the cis content of the polymers were not affected by the kind of polymer sheets. However, the molecular weights, M¯_n of the polymers polymerized on the polymer sheets were 13,000–30,000, and the values were several times higher than the molecular weight of the polymers polymerized on glass plate. On the other hand, at the sublimation temperature of 82°C, the cis content of the polymers apparently increased with decreasing d-value of the polymer sheets. On X-ray diffraction patterns of monomer mixtures sublimed onto polymer sheets, the diffraction intensities and the diffraction peak positions were concerned with the d-value of the polymer sheets. Using polymer sheets, the diffraction peak intensities of the monomer mixture at 7.73 and 7.58 Å decreased compared with those on glass plate. In contrast, the peak at 3.65 Å, which is a negligibly small peak on glass plate, obviously increased. However, as the d-value of the polymer sheets (PET 3.45 Å; OPP (oriented polypropylene) 5.2 Å) increased, the diffraction peak intensities at 7.73 Å and 7.58 Å gradually increased and the diffraction peak intensity at 3.65 Å gradually decreased. The parallel electrical conductivities (σ_||) toward the layered structural polymer on PET, ON-6 and glass plate under air atmosphere were 10⁻⁷, 10⁻⁹ and 10⁻¹¹ S/cm, respectively. Under a reduced pressure of 10⁻³ mmHg, the σ_|| values of each polymer lowered by one or two orders of magnitude. On the other hand, the σ_|| values of the nonlayered structural polymers under air atmosphere were about 10⁻¹¹–10⁻¹² S/cm and were independent of the substrates. Even under a reduced pressure of 10⁻³ mmHg, the σ_|| values hardly changed and remained at 10⁻¹¹–10⁻¹² S/cm. The vertical electrical conductivities (σ_⟂) of the layered structural polymers on conductive PET sheet coated by indium tin oxide or NESA glass plates were independent of the substrates and were 10⁻¹⁴ S/cm under air atmosphere. The σ_⟂ values of the nonlayered structural polymers also exhibited the same values. The reversible change of the amount of the layered structural polymer on PET sheet was also caused by irradiation of the photo-light which is the effective wavelength for the phase transition of the polymers mounted on glass plate. The σ_|| value of the layered structural polymer on ON-6 sheet reversibly changed with the amount of the layer structure controlled by the photo-light, that is, the σ_|| increased up to about one order of magnitude by the photo-light at 545.6 nm. On the other hand, the _|| decreased to about one order of magnitude by the photo-light at 539.6 nm. Anisotropic conductivity with respect to σ_|| and σ_⟂, and oxygen doping mechanisms were discussed in relation to the layer structure of polymers. © 1997 John Wiley & Sons, Ltd.