磷系阻燃环氧树脂研究

本文对近年来国内外9,10-二氢-9-氧杂-10-磷杂菲-10-氧化物（DOPO）衍生物的合成及其应用于阻燃环氧树脂的方法进行介绍,并对所显示的阻燃性、热性能等作了概述和比较。将反应型磷系阻燃剂DOPO衍生物引入环氧树脂基体结构中形成阻燃持久、无卤、低烟、无毒、热稳定性好的新型含磷环氧树脂。     

DOPO及其衍生物的合成和阻燃性能研究进展

综述了近几年有机磷阻燃剂中讨论研究较多的9,10-二氢-9-氧-10-磷杂菲-10-氧化物(DOPO)及其衍生物的合成和阻燃性能的研究进展,并对DOPO及其衍生物的发展方向进行了展望。     

磷系阻燃环氧电子封装材料研究进展

磷系阻燃环氧树脂具有阻燃效率高、制备成本低、环境危害小等显著优点,成为5G通讯、智能电子和半导体等领域的重要封装材料。基于高效磷系阻燃环氧封装材料的性能要求,介绍了磷系阻燃环氧树脂的种类和阻燃机理,总结了当前磷系阻燃环氧树脂在电子封装领域的应用研究进展并对其未来发展趋势进行了展望,指出本征型(反应型)磷系阻燃环氧树脂存在制备困难、有效磷含量低等问题,需要进一步优化工艺并提升封装体系中的磷含量。相比之下,填充型磷系阻燃环氧树脂的制备工艺简单、阻燃剂种类多、磷含量较高,在电子封装领域应用最为广泛。     

环氧树脂中磷系阻燃剂协效体系的研究进展

近年来,出于环保等方面的考虑,一些卤系阻燃剂被逐渐淘汰,磷系阻燃剂作为卤系阻燃剂的替代品备受关注。然而,高效的磷系阻燃剂通常会在提高阻燃性能的同时产生更多的烟雾,因此需要与协效剂搭配使用。本文介绍了磷系阻燃剂在环氧树脂中的阻燃机理,综述了环氧树脂中磷系阻燃剂的协效体系的研究进展,包括无机协效剂、有机协效剂及有机-无机杂化协效剂等,并对环氧树脂体系中磷系阻燃剂的协效体系的未来发展趋势进行了展望。     

磷杂菲类阻燃剂的合成及其与聚磷酸铵复合膨胀体系对环氧树脂的阻燃性能研究

以9,10-二氢-9-氧杂-10-磷杂菲-10-氧化物(DOPO)、五硫化二磷(P2S5)为原料合成9,10-二氢-9-氧杂-10-磷杂菲-10-硫化物(DOPS),并将DOPS与聚磷酸铵(APP)组成复合阻燃剂,用于环氧树脂(EP)的阻燃改性.通过氧指数(LOI)、垂直燃烧(UL-94)、热失重(TGA)、锥形量热(CONE)和扫描电镜(SEM)等方法对改性后的环氧树脂的阻燃性能和阻燃机理进行了测试和分析.实验结果表明,DOPS/APP阻燃体系对EP具有很好的阻燃性能,且复配阻燃剂的阻燃效果比单一的阻燃剂阻燃效果好;其中,当阻燃剂的总添加量达到30%时即W_(DOPS)=10%、W_(APP)=20%时,阻燃EP复合材料的LOI值可达到29.2%,垂直燃烧等级达到UL-94 V-0级,残炭量可达49.3%.     

聚磷酸酯阻燃剂复配聚磷酸铵对环氧树脂阻燃性能的影响

合成了一种9,10-二氢-9-氧杂-10-磷杂菲-10-氧化物(DOPO)的衍生物——聚苯氧基磷酸-2-10-氢-9-氧杂-磷杂菲基对苯二酚酯(POPP), 以间苯二胺(m-PDA)为固化剂, 环氧树脂(EP)为基料, POPP为阻燃剂, 复配聚磷酸铵(APP), 制备了不同磷含量的阻燃环氧树脂. 利用极限氧指数(LOI)和垂直燃烧(UL94)实验表征了环氧树脂的阻燃性能; 以热重分析、 锥型量热和扫描电镜分析了阻燃环氧树脂的热性能和表面形态. 研究结果表明, 阻燃剂总加入量(质量分数)为5%时即可达到UL94 V-0级, 同时LOI值为27.7%; 当总加入量为15%, 即w_POPP=5%, w_APP=10 %时, 其LOI值可达到33.8%. 随着磷含量的增加, 阻燃环氧树脂的初始降解温度略有降低, 但高温下的残炭率明显增加. POPP/APP的加入在很大程度上降低了环氧树脂的热释放速率、 有效燃烧热、 烟释放量和有毒气体释放量. 阻燃环氧树脂在高温下形成比较稳定的致密膨胀炭层, 为底层的环氧树脂主体隔绝了分解产物及热量和氧气交换, 增强了高温下的热稳定性.     

磷系阻燃剂阻燃聚碳酸酯研究进展*

磷系阻燃剂具有阻燃效率高、低烟、低毒、与基质材料相容性好等优点,在阻燃高分子材料领域得到广泛应用。本文介绍了磷系阻燃剂的分类及阻燃机理,综述了近年来磷酸酯阻燃剂、膦酸酯阻燃剂、DOPO磷杂菲类阻燃剂、磷腈类阻燃剂和无机磷阻燃剂在阻燃聚碳酸酯领域的研究进展,为新型磷系阻燃剂的研发提供参考。     

聚磷酸酯阻燃剂复配蒙脱土及聚磷酸铵对环氧树脂阻燃性能的影响

本文以二氯化磷酸对甲基苯酯和10-(2,5-二羟基苯基)-10-氢-9-氧杂-10-磷杂菲-10-氧化物(ODOPB)为原料,合成了一种新型聚磷酸酯阻燃剂聚磷酸-2-10-氢-9-氧杂-10-磷杂菲-10-氧化物基对苯二酚对甲苯酯(POTP),并采用傅里叶变换红外光谱(FTIR)和核磁共振(~(31)P-NMR,~1H-NMR和~(13)C-NMR)对其结构进行表征.将POTP与蒙脱土(MMT)及聚磷酸铵(APP)组成复合阻燃剂对环氧树脂(EP)进行阻燃改性,通过垂直燃烧(UL-94)、氧指数(LOI)、热失重(TGA)、锥形量热(CONE)和扫描电镜(SEM)等方法研究其对EP的热性能和阻燃性能的影响.结果表明,当阻燃剂添加量为7%时, EP复合材料UL-94测试等级可达V-0级;当添加阻燃剂为9%时,其LOI值可达到27.6%,最大热释放速率(Pk-HRR)下降了50.1%,热释放总量(THR)下降了27.4%,其残炭量高达29%. CONE测试后的残炭形貌研究显示阻燃EP在高温下形成较稳定的致密膨胀炭层,能有效抑制烟毒性气体释放,隔绝可燃气体与空气的交换,从而提高阻燃EP在高温下的热稳定性和阻燃性能.     

有机磷类阻燃剂的合成及应用进展

由于有机磷阻燃剂具有高效、低毒、无污染及无烟等特点,该领域的研究在国内外得到极大的关注,已经在合成和应用等方面取得了显著成就。 本文对磷系阻燃剂的阻燃机理及近年来磷系阻燃剂的应用进展作了简要综述。 分别综述了各类有机含磷阻燃剂的研究进展,并提出了有机磷阻燃剂今后的发展方向。     

DOPO基膦酸铝盐的制备及其阻燃环氧树脂的性能研究

以10-羟基-9-氧杂-10-磷杂菲-10-氧化物(DOPO-OH)和六水合氯化铝为原料合成了一种DOPO基膦酸铝盐(DOPO-Al)阻燃剂,通过红外光谱、扫描电镜、能谱、核磁共振磷谱和热失重表征了其结构,并制备了DOPO-Al阻燃的环氧树脂,通过极限氧指数、锥形量热、热失重和差示扫描量热测试分析了该树脂的阻燃和热性能。结果表明,DOPO-Al为高温阻燃剂,其初始热分解温度(T_(5%))高达595.5℃。DOPO-Al能提高环氧树脂的阻燃性能和耐热性。当DOPO-Al添加量为7.5%(wt)时,环氧树脂的LOI值由24.1%提高至31.3%;在燃烧过程中,使其热释放速率峰值、平均热释放速率、总热释放、总烟释放和总烟产量均降低,使残留物增加幅度高达135%。炭层分析表明DOPO-Al存在凝聚相阻燃机理。环氧树脂的T_(5%)和玻璃化转变温度分别高达368.9℃和161.8℃,所制备阻燃环氧树脂具有较好的热性能。     

阻燃型含磷环氧树脂体系的研究进展

将磷导入环氧树脂体系而赋予其阻燃性能是目前热门的研究课题。本文简述了含磷阻燃剂的阻燃机理，详细讨论了含磷阻燃环氧的类型及固化物的阻燃特性，以及磷和氮、硅等元素的协同效应。     

Synthesis and properties of a phosphorus-containing flame retardant epoxy resin based on bis-phenoxy (3-hydroxy) phenyl phosphine oxide

A reactive phosphorus-containing compound, bis-phenoxy (3-hydroxy) phenyl phosphine oxide (BPHPPO) was first successfully synthesized to produce the phosphorus-containing flame retardant epoxy resin (BPHPPO-EP). The chemical structures were characterized from FTIR, MS, NMR spectra and elemental analyses. Thermal degradation behaviors and flame retardant properties of the cured epoxy resins were investigated from the thermogravimetric analysis (TGA) and the limiting oxygen index (LOI) test using 4,4′-diaminodiphenylsulfone (DDS) as curing agent. The high char yields and the high limiting oxygen index values were found to certify the great flame retardancy of this phosphorus-containing epoxy resin.     

A vanillin-derived flame retardant based on 2-aminopyrimidine for enhanced flame retardancy and mechanical properties of epoxy resin

In order to give epoxy resin good flame retardance, a novel bio-based flame retardant based on 2-aminopyrimidine (referred to as VAD) was synthesized from renewable vanillin as one of the starting materials. Its structure was confirmed by NMR and mass spectra. The epoxy resins containing VAD were prepared by utilizing 4,4-diaminodiphenylmethane (DDM) as a co-curing agent, and their flame-retardant, mechanical and thermal properties and corresponding mechanisms were studied. VAD accelerated the cross-linking reaction of DDM and E51 (diglycidyl ether of bisphenol A). 12.5 wt% VAD made the epoxy resin achieve UL-94 V-0 rating and its limited oxygen index (LOI) value increase from 22.4% to 32.3%. The cone calorimetric testing results revealed the decline in the values of total heat release (THR) and peak of heat release rate (pk-HRR) and the obvious enhancement of residue yield. A certain amount of VAD enhanced the flame inhibition, charring and barrier effects, resulting in good flame retardance of the epoxy resin. Furthermore, the tensile strength, flexural strength and flexural modulus of the epoxy resin with 12.5 wt% loading of VAD were 6.5%, 14.9%, 15.2% higher than those of EP, indicating the strengthening effect of VAD. This work guarantees VAD to be a promising flame retardant for enhancing the fire retardancy of epoxy resin without compromising its mechanical properties.     

A novel nitrogen,phosphorus, and boron ionic pair compound toward fire safety and mechanical enhancement effect for epoxy resin

In this work, a novel nitrogen, phosphorus and boron ionic pair compound (DTPA[AZB]), composed of a protonated flame retardant (DTPA) 6,6'‐(1,4‐phenylenebis((pyrazin‐2‐ylamino)methylene))bis(dibenzo[c,e][1,2]oxaphosphinine 6‐oxide) and a counter anion alizarin borate (AZB), has been prepared and fully characterized, AZB was synthesized by the reaction of alizarin with boric acid. DTPA was produced in two steps. First, terephthalaldehyde was condensed with aminopyrazine to form the corresponding imine. This was treated with 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) to generate DTPA. Blending with DTPA greatly reduced the flammability of epoxy resin. When the amount of DTPA added was 4%, a modified epoxy resin passed the V‐0 rating and the limiting oxygen index (LOI) reached 32.5%. With the introduction of 3% AZB into the EP/DTPA material, the LOI reached 33.5%. Simultaneously, compared with that of neat EP, the peak heat release rate and smoke production rate for EP/DTPA‐4 was decreased by 24.1% and 40.7%, respectively, and the peak heat release rate and smoke production rate for EP/DTPA[AZB]‐3 was decreased by 32.9% and 43.4%, respectively. The results indicate that AZB and DTPA show good cooperative flame retardant effects. The flame retardancy of the modified epoxy is improved with greater heat release suppression combustion of the resin. A mode of flame retardant action has been proposed based on analysis results from Py‐GC/MS for DTPA, and SEM, IR and Raman for the residual carbon from cone calorimeter and UL‐94 tests, respectively. Importantly, the tensile strength, fexural strength, and fexural modulus of the EP/DTPA[AZB] increased compared with the same properties of neat EP.     

Thermal and physical properties of flame-retardant epoxy resins containing 2-(6-oxido-6H-dibenz〈c,e〉〈1,2〉oxaphosphorin-6-yl)-1,4-naphthalenediol and cured with dicyanate ester

2-(6-oxido-6H-dibenz(c,e)(1,2)oxaphosphorin-6-yl)-1,4-naphthalenediol (DOPONQ) was prepared by the addition reaction of 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) with 1,4-naphthoquinone. The phosphorus-containing diol (DOPONQ) was used as a reactive flame retardant by an advancement reaction with the diglycidyl ether of bisphenol-A epoxy (DGEBA) resin at various stoichiometric ratios. DOPONQ-containing advanced epoxy was separately cured with various dicyanate esters to form flame-retardant epoxy/cyanate ester systems. The effect of the phosphorus content and dicyanate ester structure on the curing characteristic, glass transition temperature, dimensional stability, thermal stability, flame retardancy, and dielectric property was studied and compared with that of the control advanced bisphenol-A epoxy system. The DOPONQ-containing epoxy/cyanate ester systems exhibited higher glass transition temperatures as well as better thermal dimensional and thermal degradation stabilities. The flame retardancy of the phosphorus-containing epoxy/dicyanate ester system increased with the phosphorus content, and a UL-94 V-0 rating could be achieved with a phosphorus content as low as 2.1%.     

Intrinsically flame retardant epoxy resin - Fire performance and background - Part I

The flame retardant effect of newly synthesized phosphorus-containing reactive amine, which can be used both as crosslinking agent in epoxy resins and as a flame retardant, was investigated. The effect of montmorillonite and sepiolite additives on the fire induced degradation was compared to pristine epoxy resin. The effect of combining the organophosphorous amine with clay minerals was also studied. It could be concluded that the synthesized phosphorus-containing amine, TEDAP can substitute the traditional epoxy resin curing agents providing additionally excellent flame retardancy: the epoxy resins flame retarded this way reach 960 °C GWFI value, 33 LOI value and V-0 UL-94 rating - compared to the 550 °C GWFI value, 21 LOI value and “no rate” UL-94 classification of the reference epoxy resin. The peak of heat release was reduced to 1/10 compared to non-flame retarded resin, furthermore a shift in time was observed, which increases the time to escape in case of fire. The flame retardant performance can be further improved by incorporating clay additives: the LOI and the HRR results showed that the optimum of flame retardant effect of clay additives is around 1 mass% filler level in AH-16-TEDAP system. Applying a complex method for mechanical and structural characterization of the intumescent char it was determined that the flame retarded system forms significantly more and stronger char of better uniformity with smaller average bubble size. Incorporation of clay additives (owing to their bubble nucleating activity) results in further decrease in average bubble diameter.     

Synthesis and properties of phosphorus-containing bio-based epoxy resin from itaconic acid

A phosphorus-containing bio-based epoxy resin (EADI) was synthesized from itaconic acid (IA) and 9,10-dihydro-9-oxa-10-phosphaphenanthrene 10-oxide (DOPO). As a matrix, its cured epoxy network with methyl hexahydrophthalic anhydride (MHHPA) as the curing agent showed comparable glass-transition temperature and mechanical properties to diglycidyl ether in a bisphenol A (DGEBA) system as well as good flame retardancy with UL94 V-0 grade during a vertical burning test. As a reactive flame retardant, its flame-resistant effect on DGEBA/MHHPA system as well as its influence on the curing behavior and the thermal and mechanical properties of the modified epoxy resin were investigated. Results showed that after the introduction of EADI, not only were the flame retardancy determined by vertical burning test, LOI measurement, and thermogravimetric analysis significantly improved, but also the curing reactivity, glass transition temperature (T _g), initial degradation temperature for 5% weight loss (T _d(5%)), and flexural modulus of the cured system improved as well. EADI has great potential to be used as a green flame retardant in epoxy resin systems.     

Synergistic flame‐retardant effect and mechanisms of boron/phosphorus compounds on epoxy resins

To explore the component synergistic effect of boron/phosphorus compounds in epoxy resin (EP), 3 typical boron compounds, zinc borate (ZB), boron phosphate (BPO₄), and boron oxide (B₂O₃), blended with phosphaphenanthrene compound TAD were incorporated into EP, respectively. All 3 boron/phosphorus compound systems inhibited heat release and increased residue yields and exerted smoke suppression effect. Among 3 boron/phosphorus compound systems, B₂O₃/TAD system brought best flame‐retardant effect to epoxy thermosets in improving the UL94 classification of EP composites and also reducing heat release most efficiently during combustion. B₂O₃ can interact with epoxy matrix and enhance the charring quantity and quality, resulting in obvious condensed‐phase flame‐retardant effect. The combination of condensed‐phase flame‐retardant effect from B₂O₃ and the gaseous‐phase flame‐retardant effect from TAD effectively optimized the action distribution between gaseous and condensed phases. Therefore, B₂O₃/TAD system generated component synergistic flame‐retardant effect in epoxy thermosets.