含菲并咪唑基团的蓝色电致发光材料

菲并咪唑作为一类新型的蓝色荧光材料的构筑基元, 其以合适的禁带宽度、 较高的发光效率、 优异的光热稳定性和相对平衡的载流子注入和传输能力, 引起广泛关注. 发展性能优良的蓝光材料对有机电致发光器件的进一步应用十分重要. 本文综述了近年来基于菲并咪唑基团的蓝色电致发光材料的研究进展, 系统地介绍了菲并咪唑基团的结构特征以及各类衍生物的器件性能, 展望了这类化合物在电致发光领域的应用前景.     

基于芘并咪唑的电致发光材料的合成与表征

以芘和咪唑为基本构筑单元,利用"一锅法"合成了一系列芘并咪唑衍生物PyPI,PyTPAI,PyCzI和Pyd-CzI.采用质谱、核磁和元素分析等手段表征了化合物的结构.通过调节与芘并咪唑相连接的共轭基团的种类、大小和空间构型,实现对分子热学性质,分子轨道能级和光电性质的调控.进一步制备了有机电致发光器件,得到了较好的器件性能.     

含硅宽禁带聚合物的合成及其光电性能研究

采用Suzuki聚合方法合成了以菲并咪唑为侧链的4种含硅宽禁带发光聚合物,并研究了这4种聚合物的光物理、电化学性质与电致发光性能.结果表明四苯基硅基团的引入能够得到宽的带隙,侧基上菲并咪唑的引入可以实现深蓝光发射.其中,基于聚合物P1的电致发光器件最大外量子效率为0.65%,最大发光效率为0.33 cd A~(-1),色坐标为(0.163,0.099).     

微波辅助合成菲并咪唑衍生物及微波非热效应

以1,10-邻菲啰啉5,6-二酮及苯甲醛(或取代苯甲醛)为原料, 在微波辐射条件下制备了一系列菲并咪唑类衍生物, 考察了温度、 时间以及投料比对微波辅助合成菲并咪唑类衍生物的影响, 并进一步探讨了微波非热效应的影响. 设计正交实验优化了反应条件; 使用SiC管作为反应容器屏蔽微波对反应的影响; 通过元素分析、 核磁共振波谱、 质谱及红外光谱等对化合物进行了表征. 结果表明, 微波辅助反应的最佳反应条件为: 1,10-邻菲啰啉-5,6-二酮与苯甲醛(或取代苯甲醛)的投料比为1: 1.5, 反应温度为100℃, 反应时间为20 min; 并且发现SiC管中反应的产率明显低于石英管反应容器. 与传统制备方法相比, 微波辅助合成方法可在更短时间内快速方便地制得菲并咪唑类衍生物; 反应温度、 反应时间以及投料比对微波辅助合成反应有明显影响; 微波非热效应有助于提高反应产率.     

不同电子传输层的蓝光有机电致发光器件的性能研究

自从Tang等^[1]首次报道多层有机电致发光器件（OLED）以来,其在亮度和效率上有了质的飞跃,表明器件的结构对提高发光亮度和发光效率起着至关重要的作用,单层器件虽然具有制作简单的优点,但却存在明显缺点：（1）复合发光区靠近金属电极,该处缺陷很多,非辐射复合几率大,导致器件效率降低;（2）由于两种载流子注入不平衡,载流子的复合几率较低,因而影响器件的发光效率,要使发光层中具有高的载流子辐射复合效率,两种载流子的注入及传输能力应相当,否则传输快的一方就会直接穿过发光层到达对电极被猝灭,平衡电子和空穴的注入与传输可通过在电极和发光层之间加入载流子输运层或限制层制作多层器件的途径来实现,基于上述考虑,我们以PPCP为发光层（PPCP是一种荧光效率较高的蓝光材料^[2-4],对其进行深入研究尚未见有文献报道＿,设计了4种不同电子传输层（ETL)的三层 结构的OLED,为研究电子传输层对器件性能的影响,我们还制备了不含电子传输层的双层器件,结果表明,通过选择合适的ETL,OLED的发光亮度及发光效率会有很大程度的改善。     

基于Zn(Q-Ph)2与DCJTB非掺杂型OLED的制备及其电致发光性能研究

合成了有机发光材料2-苯基-8-羟基喹啉锌Zn(Q-Ph)2, 通过1H NMR, UV-Vis及MS等手段对配合物进行了结构表征. 利用该材料与高效的红光染料DCJTB复合制备出全新结构的非掺杂型OLED器件, 其结构为ITO/NPB/DCJTB/Zn(Q-Ph)2/AlQ3/Al. 将DCJTB超薄层的厚度调节到0—2.0 nm范围内, OLED器件的发光色调经历了黄光、红光和橙光的转变, 并且探讨了DCJTB厚度对OLED发光机理以及发光复合区域的影响. 当DCJTB的厚度为0.5 nm时, 获得了稳定的红光发射, 该器件在5.5 V电压下启亮, 在25 V外加电压下发光亮度达到420 cd/m2, 对应的电流密度为250 mA/cm2.     

羟基取代菲并咪唑衍生物对低碳钢的缓蚀性能

通过分子设计,增大邻菲罗啉平面结构,在不同位次引入-OH,合成2-(2-羟基苯基)-1H-咪唑[4,5-f][1,10]邻菲啰啉(2HIP)、2-(3-羟基苯基)-1H-咪唑[4,5-f][1,10]邻菲啰啉(3HIP)和2-(4-羟基苯基)-1H-咪唑[4,5-f][1,10]邻菲啰啉(4HIP)等三种羟基取代菲并咪唑衍生物。采用失重法、电化学法以及扫描电镜等研究其在1mol·L^-1HCl溶液中对低碳钢的缓蚀性能。三种缓蚀剂在低碳钢表面服从Langmuir吸附,缓蚀效率在实验浓度范围内均超过了90%,且4HIP具有最好的缓蚀效果,最高缓蚀效率为96.36%。DFT理论计算探讨了三种缓蚀剂分子结构与缓蚀剂效率关系,理论计算与实验结果具有一致性。     

有机小分子电致发光器件的蓝光主体材料的合成与表征

报道了应用于溶液法制备器件的小分子蓝光主体材料2-叔丁基-9,10-二(9,9-二正丙基芴基)蒽(TBPFA), 合成路线如Scheme 1所示, 该化合物具有较高的荧光量子效率,以它作为主体材料, 采用旋涂法制备了掺杂与非掺杂型单层器件, 并对器件性能进行了初步研究.     

1,10-邻菲啰啉并咪唑衍生物阴离子受体的合成及识别性能

设计合成了2个1,10-邻菲啰啉并咪唑衍生物阴离子受体2-(2-羟基苯基)-1H-咪唑[4,5-f][1,10]邻菲啰啉(1)和2-(2-羟基-5-溴苯基)-1H-咪唑[4,5-f][1,10]邻菲啰啉(2), 受体2的结构由X射线单晶衍射分析确证. 通过紫外-可见光谱滴定及 ¹H NMR滴定研究了这2个受体对F^-, Cl^-, Br^-, I^-, H₂PO₄^-和AcO^- 6种阴离子的识别传感作用及作用机理. 结果表明, 受体对AcO^-, F^-和H₂PO₄^-有较强的传感作用, 溶液颜色由淡黄色变为黄色; 对Cl^-的作用较弱; 而对Br^-和I^-则无明显作用. 通过机理研究发现, 受体与F^-, H₂PO₄^-和AcO^-形成1: 1的氢键超分子, 当阴离子的量超过受体的1倍以后, 咪唑氮上的氢转移到阴离子; 受体与Cl^-以氢键形成超分子复合物, 而与Br^-和I^-作用很弱.     

芳基咪唑并[4,5-f][1,10]菲咯啉的无溶剂绿色合成研究

以菲咯啉二酮、苯甲醛及其衍生物和醋酸铵为原料,采用无溶剂绿色研磨工艺,合成了芳基咪唑并菲咯啉化合物.通过对不同反应条件的筛选,得到一条高效、简便、绿色的合成芳基咪唑并菲咯啉化合物路线,不同的芳醛与菲咯啉二酮都可以较高的收率得到相应的芳基咪唑并[4,5-f][1,10]菲咯啉.     

High‐Performance Blue OLEDs Based on Phenanthroimidazole Emitters via Substitutions at the C6‐ and C9‐Positions for Improving Exciton Utilization

Donor–acceptor (D–A) molecular architecture has been shown to be an effective strategy for obtaining high‐performance electroluminescent materials. In this work, two D–A molecules, Ph‐BPA‐BPI and Py‐BPA‐BPI, have been synthesized by attaching highly fluorescent phenanthrene or pyrene groups to the C6‐ and C9‐positions of a locally excited‐state emitting phenylamine–phenanthroimidazole moiety. Equipped with good physical and hybridized local and charge‐transfer properties, both molecules show high performances as blue emitters in nondoped organic light‐emitting devices (OLEDs). An OLED using Ph‐BPA‐BPI as the emitting layer exhibits deep‐blue emission with CIE coordinates of (0.15, 0.08), and a maximum external quantum efficiency (EQE), current efficiency (CE), and power efficiency (PE) of 4.56 %, 3.60 cd A^?1, and 3.66 lm W^?1, respectively. On the other hand, a Py‐BPA‐BPI‐based, sky‐blue OLED delivers the best results among nondoped OLEDs with CIE_y values of < 0.3 reported so far, for which a very low turn‐on voltage of 2.15 V, CIE coordinates of (0.17, 0.29), and maximum CE, PE, and EQE values of 10.9 cd A^?1, 10.5 lm W^?1, and 5.64 %, were achieved, respectively. More importantly, both devices show little or even no efficiency roll‐off and high singlet exciton‐utilizing efficiencies of 36.2 % for Ph‐BPA‐BPI and 39.2 % for Py‐BPA‐BPI.     

Non‐Doped Sky‐Blue OLEDs Based on Simple Structured AIE Emitters with High Efficiencies at Low Driven Voltages

Blue organic light‐emitting diodes (OLEDs) are necessary for flat‐panel display technologies and lighting applications. To make more energy‐saving, low‐cost and long‐lasting OLEDs, efficient materials as well as simple structured devices are in high demand. However, a very limited number of blue OLEDs achieving high stability and color purity have been reported. Herein, three new sky‐blue emitters, 1,4,5‐triphenyl‐2‐(4‐(1,2,2‐triphenylvinyl)phenyl)‐1H‐imidazole (TPEI), 1‐(4‐methoxyphenyl)‐4,5‐diphenyl‐2‐(4‐(1,2,2‐triphenylvinyl)phenyl)‐1H‐imidazole (TPEMeOPhI) and 1‐phenyl‐2,4,5‐tris(4‐(1,2,2‐triphenylvinyl)phenyl)‐1H‐imidazole (3TPEI), with a combination of imidazole and tetraphenylethene groups, have been developed. High photoluminescence quantum yields are obtained for these materials. All derivatives have demonstrated aggregation‐induced emission (AIE) behavior, excellent thermal stability with high decomposition and glass transition temperatures. Non‐doped sky‐blue OLEDs with simple structure have been fabricated employing these materials as emitters and realized high efficiencies of 2.41 % (4.92 cd A⁻¹, 2.70 lm W⁻¹), 2.16 (4.33 cd A⁻¹, 2.59 lm W⁻¹) and 3.13 % (6.97 cd A⁻¹, 4.74 lm W⁻¹) for TPEI, TPEMeOPhI and 3TPEI, with small efficiency roll‐off. These are among excellent results for molecules constructed from the combination of imidazole and TPE reported so far. The high performance of a 3TPEI‐based device shows the promising potential of the combination of imidazole and AIEgen for synthesizing efficient electroluminescent materials for OLED devices.     

软硬段交替型蓝绿色发光共聚物及其电致发光性能研究

合成了一种分子主链由发光链段－1，5－二（3，5－二甲氧基苯乙烯基）萘与柔性隔离链段－三缩二乙二醇组成的交替型蓝绿色发光聚合物（TEO－VN）。该聚合物能溶于氯仿、甲苯、二氯甲烷等有机溶剂中，旋涂制成的薄膜高度透明、均匀、无针孔。其Tg为42℃。TEO－VN具有优异的耐热稳定性，在氮气中的最低分解温度高达409℃。对其发光性能的研究表明，TEO－VN是一种典型的蓝绿色发光聚合物，其最大发射峰处于499nm。以TEO－VN装配的发光二极管（LED）的起亮电压为5V，在正向偏压为20V时，最大发光亮度为275cd/m^2。     

A Novel Spiro[acridine‐9,9′‐fluorene] Derivatives Containing Phenanthroimidazole Moiety for Deep‐Blue OLED Application

Typical π–π stacking and aggregation‐caused quenching could be suppressed in the film‐state by the spiro conformation molecular design in the field of organic light‐emitting diodes (OLEDs). Herein, a novel deep‐blue fluorescent material with spiro conformation, 1‐(4‐(tert ‐butyl)phenyl)‐2‐(4‐(10‐phenyl‐10H ‐spiro[acridine‐9,9′‐fluoren]‐2‐yl)phenyl)‐1H ‐phenanthro[9,10‐d ]imidazole ( SAF‐BPI ), was designed and synthesized. The compound consists of spiro‐acridine‐fluorene (SAF) as donor part and phenanthroimidazole (BPI) as acceptor part. Owing to the rigid SAF skeleton, this compound exhibits a high thermal stability with a glass transition temperature (T _g) of 198 °C. The compound exhibits bipolar transporting characteristics demonstrated by the single‐carrier devices. The non‐doped OLEDs based on the SAF‐BPI as the emitting layer shows maximum emission at 448 nm, maximum luminance of 2122 cd m⁻², maximum current efficiency (CE) of 3.97 cd A⁻¹, and a maximum power efficiency of 2.08 lm W⁻¹. The chromaticity coordinate is stable at (0.15, 0.10) at the voltage of 7–11 V. The device shows a slow efficiency roll‐off with CE of 3.35 and 2.85 cd A⁻¹ at 100 and 1000 cd m⁻², respectively.     

Efficient Blue Electroluminescence from a Single‐layer Organic Device Composed Solely of Hydrocarbons

An interesting physical phenomenon, electroluminescence, that was originally observed with a hydrocarbon molecule has recently been developed into highly efficient organic light‐emitting devices. These modern devices have evolved through the development of multi‐element molecular materials for specific roles, and hydrocarbon devices have been left unexplored. In this study, we report an efficient organic light‐emitting device composed solely of hydrocarbon materials. The electroluminescence was achieved in the blue region by efficient fluorescence and charge recombination within a simple single‐layer architecture of macrocyclic aromatic hydrocarbons. This study may stimulate further studies on hydrocarbons to uncover their full potential as electronic materials.     

Structural Controls of Tetraphenylbenzene-based AIEgens for Non-doped Deep Blue Organic Light-emitting Diodes

Aggregation-induced emission(AIE)has emerged as a new concept,giving highly efficient solid-state photoluminescence.Particularly,AIE luminogens(AIEgens)with deep blue emission(400–450 nm)have displayed salient advantages for non-doped organic light-emitting diodes(OLEDs).However,deep blue emitters with Commission Internationale de L’Eclairage(CIE)coordinates less than 0.08 are still rare.In this review,we outline the latest achievements in the molecular guidelines based on the AIE core of tetraphenylbenzene(TPB)for developing efficient deep blue AIEgens.We provide insights into the construction of deep blue emitters with high horizontal orientation by regulating the length of the linear molecule.We also discuss the luminescence mechanisms of these AIEgens-based OLEDs by using the magnetic field effects measurements.Finally,a summary of the challenges and perspectives of deep blue AIEgens for non-doped OLEDs is also presented.     

Nonbonding/Bonding Molecular Orbital Regulation of Nitrogen-Boron-Oxygen-embedded Blue/Green Multiresonant TADF Emitters with High Efficiency and Color Purity

In this study, we synthesized and characterized multiresonant thermally activated delayed fluorescent (TADF) materials embedded with nitrogen-boron-oxygen (N−B−O), exhibiting color-tunability between blue and green, namely NBO , m-DiNBO , and p-DiNBO . The three emitter materials showed a high photoluminescence quantum yield (PLQY) and a state-of-the-art narrow full width at half maximum (FWHM) of 96 %/25 nm, 87 %/17 nm, and 99 %/19 nm, respectively. For m-DiNBO and p-DiNBO , the emission color could be tuned from blue to green by regulating the nonbonding/bonding molecular orbital characters. Owing to the expanded planar molecular structure, m-DiNBO and p-DiNBO showed high horizontal dipole ratio (Θ) of 88 % and 92 %, respectively. OLEDs were prepared with NBO , m-DiNBO , and p-DiNBO , exhibiting high external quantum efficiencies of 16.8 %, 24.2 %, and 21.6 %, respectively. NBO and m-DiNBO exhibited pure-blue emission with CIE coordinates of (0.137, 0.142) and (0.126, 0.098), respectively. p-DiNBO showed pure-green emission with a CIE coordinate of (0.258, 0.665).     

新型含氟聚苯撑乙烯的合成及电致发光性能

设计并合成了两个不同烷氧基增溶的结构新颖的含氟聚苯撑乙烯Pa, Pb和共聚物Pc. 通过核磁共振和元素分析对其结构进行了表征, 通过热重分析、凝胶色谱测定了其热分解温度和分子量及分布; 紫外-可见吸收光谱仪和荧光分光光度计测得其吸收-发射光谱. 测量发现热失重曲线拐点温度超过400 ℃. 由2-乙基己基增溶的Pa和Pc具有优异的溶解性, 固态荧光发射波长分别为499和585 nm, 相应比PPV和MEH-PPV稍有蓝移. 应用旋转涂膜的方法制作Pa和Pc的双层器件(ITO/PEDOT/Polymer/Ba/Al), 电致发光波长分别为494和604 nm, 器件均具有较低的启动电压(4 V左右), 分别在24和15 V时达到最大亮度598和203 cd•m^－2, 而此时电流密度分别为100和80 mA•cm^－2.     

Poly（meta-phenylene） Derivative with Rigid Twisted Biphenyl Units in Backbone： Synthesis, Structural Characterization, Photophysical Properties and Electroluminescence

A soluble poly(meta-phenylene)derivative with rigid twisted biphenyl unit was synthesized by the Yamamoto coupling reaction.The polymer is soluble in common organic solvents,and the number-average molecular weight is about 6500.The UV-Vis and quantum chemical calculation indicate that the different conformation segments named "conformers" exist in the polymer backbones;it was also further confirmed by the single crystal X-ray diffraction study of the dimeric model compound.The π-π transition of biphenyl segments of twisted and planar conformations made the polymer exhibit a strong absorption around 256 nm and a weak absorption at about 300 nm.Furthermore,the polymer exhibits a strong UV photoluminescence at 372 nm when the excitation wavelengths are longer than 300 nm.The ultraviolet-emitting electroluminescence(EL)device with the single layer structure shows EL λmax of the derivative at 370 nm.     

咔唑取代二苯乙烯基芳烃的制备及其电致发光特性

Novel blue organic electroluminescent materials with improved hole transporting ability were synthesized by incorporating carbazoles into distyrylarylene (DSA). The new carbazole substituted DSA derivatives (CDSA) were characterized by ^1H NMR, IR, MS and elemental analysis. The luminescent characteristics of CDSA were investigated. Two types of blue light emitting diodes were constructed from CDSA: ITO/NPB/CDSA/PBD/LiF/Al and ITO/CDSA/PBD/LiF/Al.