Temperature- and pH-triggered reversible transfer of doubly responsive hairy particles between water and a hydrophobic ionic liquid

This article reports on the synthesis of thermo- and pH-sensitive polymer-brush-grafted silica particles ("hairy" particles) and the study of their phase-transfer behavior between water and a hydrophobic ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ([EMIM][TFSA]), in response to temperature and pH changes. The hairy particles were made by the surface-initiated atom transfer radical polymerization of methoxytri(ethylene glycol) methacrylate (TEGMMA) and tert-butyl methacrylate with a molar ratio of 100:11 in the presence of a free initiator and the subsequent removal of tert-butyl groups. The cloud points (CPs) of poly(TEGMMA-co-methacrylic acid), obtained after the treatment of the free polymer with trifluoroacetic acid, in both water and [EMIM][TFSA]-saturated water increased with the increase in pH and can be tuned over a wide temperature range. The hairy particles moved spontaneously from the aqueous phase to the [EMIM][TFSA] phase upon heating at 80 °C and returned to the aqueous layer upon cooling at 10 °C. This process can be repeated many times regardless of whether the pH of the aqueous phase is 2.99, 5.00, or 7.02. UV-vis absorbance measurements showed that the transfer temperature (T(tr)) of hairy particles from water to [EMIM][TFSA] increased with the increase in the pH of the aqueous phase. A linear relationship was observed between the T(tr) of hairy particles and the CP of the corresponding free polymer. By taking advantage of the tunability of the T(tr) of hairy particles, we demonstrated the pH-driven reversible transfer of hairy particles at a fixed temperature by changing the pH of the aqueous phase and multiple phase-transfer processes by controlling both the temperature and pH.     

Polymersomes with ionic liquid interiors dispersed in water

We describe polymersomes with ionic liquid interiors dispersed in water. The vesicles are prepared via a simple and spontaneous migration of poly(butadiene-b-ethylene oxide) (PB-PEO) block copolymer vesicles from a hydrophobic ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][TFSI]), to water at room temperature. As PB is insoluble in both water and [EMIM][TFSI] and PEO is well solvated in both media, the vesicles feature a PB membrane with PEO brushes forming both interior and exterior coronas. The robust and stable PB-PEO vesicles migrate across the liquid-liquid interface with their ionic liquid interiors intact and form a stabilized aqueous dispersion of vesicles enclosing microscopic ionic liquid pools. The nanostructure of the vesicles with ionic liquid interiors dispersed in water is characterized by direct visualization using cryogenic transmission electron microscopy. Upon heating, the vesicles can be quantitatively transferred back to [EMIM][TFSI], thus enabling facile recovery. The reversible transport capability of the shuttle system is demonstrated by the use of distinct hydrophobic dyes, which are selectively and simultaneously loaded in the vesicle membrane and interior. Furthermore, the fluorescence of the loaded dyes in the vesicles enables probing of the microenvironment of the vesicular ionic liquid interior through solvatochromism and direct imaging of the vesicles using laser scanning confocal microscopy. This vesicle system is of particular interest as a nanocarrier or nanoreactor for reactions, catalysis, and separations using ionic liquids.     

Temperature-induced transport of thermosensitive hairy hybrid nanoparticles between aqueous and organic phases

This paper reports on the temperature-induced transport of thermosensitive polymer brush-grafted silica nanoparticles between aqueous and organic phases. Poly(methoxytri(ethylene glycol) methacrylate), a thermosensitive water-soluble polymer with a cloud point of approximately 48 degrees C in H2O, was grown on silica nanoparticles by surface-initiated atom transfer radical polymerization in the presence of a free initiator. These hairy particles were found to quantitatively transfer from aqueous to ethyl acetate phases upon heating at 60 degrees C under the stirring condition. Cooling in an ice/water bath caused the particles to move from ethyl acetate to the aqueous layer. The concentrations of the particles in the original phases during the transport processes were monitored by UV-vis spectrometry. When mutually saturated water and ethyl acetate were used, the transport rates of the particles between the two phases were enhanced. The faster transport was attributed to the solvent phase separation, which produced liquid droplets, dramatically increased the interfacial area, and hence facilitated the transport of the particles. The reversible transfer of the particles between the aqueous and ethyl acetate phases upon heating at 60 degrees C and cooling in an ice/water bath can be repeated consecutively at least 10 times. The hairy particles can also be quantitatively transported from 1-butanol and toluene to H2O by stirring in an ice/water bath. However, only 60% of the particles transferred from water to 1-butanol and no particles to toluene upon heating at 60 degrees C. The reasons are discussed.     

Block copolymer micelle shuttles with tunable transfer temperatures between ionic liquids and aqueous solutions

Four poly((1,2-butadiene)- block-ethylene oxide) (PB-PEO) diblock copolymers were shown to self-assemble into micelles with PB cores and PEO coronas (including spheres, cylinders, and vesicles) in the ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][TFSI]). All four systems exhibited the "micelle shuttle" (He, Y.; Lodge, T. P. J. Am. Chem. Soc. 2006, 128, 12666-12667), whereby PB-PEO micelles transferred, reversibly and with preservation of micelle structure, from an aqueous phase at room temperature to a hydrophobic ionic liquid at high temperature. The micelle size (both mean and distribution) depends on whether it was initially dissolved in water or in the ionic liquid, but the initial micelle structures in the ionic liquid were shown by dynamic light scattering to be preserved during the transfer and persist essentially unchanged for months in both the ionic liquid and water. The transfer was shown to be driven by the deteriorating solvent quality of water for PEO at high temperature, while the ionic liquid remains a good solvent. The transfer temperature could be tuned by adding ionic or nonionic additives to the aqueous phase to change the solvent quality of water for PEO, and by using ionic liquids with different polarity.     

Thermosensitive water-dispersible hairy particle-supported pd nanoparticles for catalysis of hydrogenation in an aqueous/organic biphasic system

We report in this article the use of thermosensitive water-dispersible polymer brush-grafted polymeric particles as carriers for Pd nanoparticles for the catalysis of hydrogenation of styrene in an aqueous/organic biphasic system. Thermoresponsive poly(methoxytri(ethylene glycol) methacrylate) brushes were grown from initiator-functionalized core-shell cross-linked poly( t-butyl acrylate) (P tBA) particles via surface-initiated atom-transfer radical polymerization. The t-butyl group of P tBA in the core was removed with trifluoroacetic acid, followed by loading of Pd2+ cations through ion exchange. Pd nanoparticles were prepared by reduction of Pd2+ ions with ethanol at 70 degrees C. Dynamic light scattering studies showed that the Pd nanoparticle-loaded thermosensitive hairy particles in water began to shrink when the temperature was above 30 degrees C. The supported Pd nanoparticles efficiently catalyzed hydrogenation of styrene in an aqueous/octane biphasic system and were reused five times with no changes in the yields in the first three cycles and slight decreases in the fourth and fifth cycles after the same period of time. Kinetics studies showed that the catalytic activity of Pd nanoparticles was modulated by the phase transition of the thermosensitive brush layer, resulting in a non-Arrhenius dependence of apparent initial rate constant, k app, on temperature.     

A novel method to prepare polymer-ionic liquid gel under high pressure and its electrochemical properties

Sol–gel transition behavior of ionic liquid gel based on poly (ethylene glycol) (PEG) and ionic liquid 1-ethyl-3-methylimidazolium ethylsulfate [EMIM][EtSO₄] has been investigated under the pressure up to 250 MPa. The Temperature versus Pressure phase diagram of PEG/[EMIM][EtSO₄] gel is constructed, and it indicates that the melting point is an increasing function of pressure. Based on the phase diagram, the PEG/[EMIM][EtSO₄] gels are prepared by cooling under the pressure of 300 MPa and atmospheric pressure, respectively. From the differential scanning calorimetry result of the recovered samples, it is found that PEG/[EMIM][EtSO₄] gel prepared under high pressure has a higher crystallinity and smaller crystal size polymer network, comparing with under atmospheric pressure. The cyclic voltammograms and impedance spectra tests indicate that the PEG/[EMIM][EtSO₄] gel prepared under high pressure exhibit higher ionic conductivity comparing with atmospheric pressure. It could be speculated these excellent properties might be attributed to the loose gel structure and high ionic density induced by high pressure.     

Preparation of ionic liquid-encapsulated polymer particles

Encapsulation of ionic liquid, 1-hexyl-3-methylimidazolium bis(trifluoromethane sulfonyl)amide ([Hmim][TFSA]), was carried out by microsuspension polymerization of ethylene glycol dimethacrylate (EGDM) utilizing the self-assembling of phase-separated polymer method, which had been proposed by us for the preparation of hollow polymer particles. After the optimization of the polymerization conditions, ionic liquid-encapsulated polymer particles, which have smooth surface morphology and a single hollow structure, were successfully prepared. Encapsulation efficiency of [Hmim][TFSA] was significantly improved from about 20–70 % by changing the shell polymer from polyEGDM homopolymer to poly(EGDM-butyl methacrylate) (50/50, w/w) copolymer, which was likely to have relatively low affinity for [Hmim][TFSA]. Additionally, ionic liquid-encapsulated polymer particles displaying ionic conductivity were successfully prepared using triethylene glycol dimethacrylate as divinyl monomer instead of EGDM.     

Thermosensitive hairy hybrid nanoparticles synthesized by surface-initiated atom transfer radical polymerization

This article reports on the synthesis of thermosensitive polymer brushes on silica nanoparticles by atom transfer radical polymerization (ATRP) and the study of thermo-induced phase transitions in water. Silica nanoparticles were prepared by the St?ber process and the surface was functionalized by an ATRP initiator. Surface-initiated ATRPs of methoxydi(ethylene glycol) methacrylate (DEGMMA) and methoxytri(ethylene glycol) methacrylate (TEGMMA) were carried out in THF at 40 degrees C in the presence of a free initiator, benzyl 2-bromoisobutyrate. The polymerizations were monitored by 1H NMR spectroscopy and gel permeation chromatography. The hairy hybrid nanoparticles were characterized by thermogravimetric analysis and scanning electron microscopy, and the thermoresponsive properties were investigated by variable temperature 1H NMR spectroscopy and dynamic light scattering. The cloud points of free poly(DEGMMA) and poly(TEGMMA) in water were around 25 and 48 degrees C, respectively. The thermo-induced phase transitions of polymer brushes on silica nanoparticles began at a lower temperature and continued over a broader range (4-10 degrees C) than those of free polymers in water (< 2 degrees C).     

Effect of ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide on the properties of poly(glycidyl methacrylate) based solid polymer electrolytes

A free standing polymer electrolytes films, containing poly(glycidyl methacrylate) (PGMA) as the polymer host, lithium perchlorate (LiClO₄), and ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl) imide [Bmim][TFSI] as a plasticizer was successfully prepared via the solution casting method. The XRD analysis revealed the amorphous nature of the electrolyte. ATR-FTIR and thermal studies confirmed the interaction and complexation between the polymer host and the ionic liquid. The maximum ionic conductivity of the solid polymer electrolyte was found at 2.56 × 10^–5 S cm^–1 by the addition of 60 wt % [Bmim][TFSI] at room temperature and increased up to 3.19 × 10^–4 S cm^–1 at 373 K, as well as exhibited a transition of temperature dependence of conductivity: Arrhenius-like behavior at low and high temperatures.     

Preparation of Composite Polymer Particles by Seeded Dispersion Polymerization in Ionic Liquids

Summary: Submicron-sized monodisperse PS particles were prepared by dispersion polymerization of styrene in ionic liquids with poly(vinylpyrrolidone) as stabilizer. Seeded dispersion polymerization of MMA was subsequently carried out with PS seeds in [Bmim][BF₄] to prepare PS/PMMA composite particles. Observation of the obtained particles of ultrathin cross-sections with a scanning and transmission electron microscope revealed that no secondary nucleation occurred during the seeded dispersion polymerization and that the particles have a core-shell morphology consisting of a PS core and a PMMA shell. Successful preparation of PS/PMMA composite particles in an ionic liquid has thus been demonstrated. Moreover, PS/PAA (PS-core/PAA-shell) composite particles were prepared by seeded dispersion polymerization in [DEME][TFSI], illustrating that hydrophobic/hydrophilic composite particles can be readily prepared in the ionic liquid.     

Synthesis and characterization of PEGylated comb-like cationic polymer by polycondensation and ATRP

PEGylated poly(2-(dimethylamino)ethyl methacrylate) with comb-like architecture was synthesized by two-step polymerization. First,poly(oligo(ethylene glycol) malicate)(POEGMA) bearing pendant hydroxyl groups was prepared by direct polycondensation of oligo(ethylene glycol) and malic acid in the presence of scandium triflate as chemoselective catalyst.Then the poly(2- (dimethylamino)ethyl methacrylate) side chains were grafted from the POEGMA backbone by atom transfer radical polymerization (ATRP) after the hydroxyl groups were modified into bromo-ester form,resulting in a PEGylated cationic copolymer with branched architecture.     

含氨基和环氧基双功能基的聚合物刷磁性微球的制备及对青霉素G酰化酶的固定化

在内部分散超顺磁性Fe3O4纳米粒子的二乙烯苯交联聚丙烯酸微球表面引入原子转移自由基聚合(ATRP)引发剂,引发聚合向微球表面分别引入P(GMMA-r-DMAEMA-r-GMA)、P(GMMA-r-DMAEMA)和P(GMMA-r-GMA)无规共聚物刷(GMMA为甲基丙烯酸甘油单酯,DMAEMA为甲基丙烯酸-N,N-二甲氨基乙酯,GMA为甲基丙烯酸缩水甘油酯),聚合物刷中GMMA链节的作用是使聚合物刷具有亲水性,DMAEMA引入氨基,GMA引入环氧基.研究了青霉素G酰化酶在这些载体上的固定化和其酶活性.结果表明,同时引入环氧基和氨基的P(GMMA-r-DMAEMA-r-GMA)刷磁性微球固定化青霉素G酰化酶的活性和活性收率都最高,其固定化动力学比只含环氧基P(GMMA-r-GMA)刷磁性微球的好.固定化酶比自由酶更耐热,固定化酶的最佳pH值比自由酶的略高,固定化酶重复使用10次后其活性保留70%.     

Modification of carbon electrode in ionic liquid through the reduction of phenyl diazonium salt. Electrochemical evidence in ionic liquid

Electrochemical reduction of the 4-nitrophenyl diazonium salt in ionic liquid media has been investigated at carbon electrode. The ionic liquid chosen for this study was 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [EMIM][TFSI]. The cyclic voltammetry study demonstrated the possibility of the electrochemical grafting of the nitrophenyl groups onto carbon electrode after the reduction of its corresponding diazonium in ionic liquid. The electrochemical characterization of the modified electrode achieved on ionic liquid displays the presence of the nitrophenyl group at the carbon surface. Moreover, the surface concentration of the attached group obtained in this media was found to be around 1.7 × 10⁻¹⁰ mol cm⁻², this value may suggest the possibility of the formation of monolayer. Furthermore, the characterization of the modified electrode in [EMIM][TFSI] showed the conversion of some NO₂-phenyl groups to NHOH-phenyl. This observation could indicate the presence of surface interaction between the reduced NO₂-phenyl and the ionic liquid cation, thanks to the presence of acidic proton in the ionic liquid cation.     

Cyclic voltammetry of Th(IV) in the room-temperature ionic liquid [Me3NnBu][N(SO2CF3)2

A Th(IV) compound, [Th(TFSI)4(HTFSI)].2H2O [where TFSI = N(SO2CF3)2], has been synthesized and characterized using elemental analysis, thermogravimetric analysis, and vibrational spectroscopy. The analysis suggests that the TFSI anion coordinates to the metal center via the sulfonyl oxygens as well as provides evidence for the coordination of HTFSI. The voltammetric behavior of this compound has been studied in the room-temperature ionic liquid [Me3NnBu][TFSI], and results show that Th(IV) is reduced to Th(0) in this ionic liquid in a single reduction step. Analysis of cyclic voltammograms shows that an insoluble product is being formed at the electrode surface, which is attributed to the formation of ThO2 by reaction with water. The E0 value for the reduction of Th(IV) to Th(0) has been determined to be -2.20 V (vs Fc+/Fc; -1.80 V vs SHE). A comparison of this E0 value with those obtained for Th(IV) reduction in a LiCl-KCl eutectic (400 degrees C), water, and nonaqueous solvents shows that the reduction in [Me3NnBu][TFSI] is easier to accomplish than that in these other solvents.     

Brush-type amphiphilic diblock copolymers from "living"/controlled radical polymerizations and their aggregation behavior

Two brush-type amphiphilic diblock copolymers, poly(poly(ethylene glycol)methyl ether methacrylate-block-polystyrene) (P(PEGMA)-b-PS) and poly(glycidyl methacrylate)-block-poly(poly(ethylene glycol)methyl ether methacrylate) (P(GMA)-b-P(PEGMA)) were synthesized, respectively, via consecutive atom-transfer radical polymerizations (ATRPs) and reversible addition-fragmentation chain-transfer (RAFT) polymerizations. The diblock copolymers were characterized by gel permeation chromatography (GPC), (1)H nuclear magnetic resonance (NMR) spectroscopy, and FT-IR spectroscopy. The aggregation behavior of the two amphiphilic diblock copolymers in water was also studied. Scanning electron and transmission electron microscopic images revealed that spherical micelles (40-80 nm in diameter) from self-assembly of the P(PEGMA)-b-PS copolymers and wormlike micelles (60-120 nm in length and 20-30 nm in diameter) from self-assembly of the P(GMA)-b-P(PEGMA) copolymers were prevalent. The spherical P(PEGMA)-b-PS micelles could self-assemble gradually into giant aggregates of several micrometers in diameter.     

Transition metal catalysed dehydrogenation of amine-borane fuel blends

Mixtures containing ammonia-borane and sec-butylamine-borane remain liquid throughout the hydrogen release process that affords tri(N-sec-butyl)borazine and polyborazylene. Concentrated solutions with metal catalysts afford >5 wt% H(2) in 1 h at 80 °C and addition of (EMIM)EtSO(4) ionic liquid co-solvent eliminates competing formation of insoluble linear poly(aminoborane) (EMIM = 1-ethyl-3-methyl-imidazolium).     

离子液体[EMIM][PF6]负载纳米SiOx表面的熔点及结构

制备了离子液体(1-乙基-3-甲基咪唑六氟磷酸 [EMIM][PF₆])负载量不同的多孔纳米氧化硅(SiO_x), 并采用差式扫描量热分析(DSC)、X射线衍射(XRD)、激光Raman光谱、傅里叶变换红外(FTIR)光谱分析等手段研究离子液体负载纳米氧化硅后的熔点变化及相行为. 研究表明负载于纳米氧化硅表面的离子液体熔点明显下降, 且负载于不同表面羟基含量的氧化硅表面熔点下降幅度不同. 纯离子液体[EMIM][PF₆]熔点为62 ℃, 在纳米氧化硅表面负载量为35%时熔点为52 ℃, 比负载前下降10 ℃; 负载于另两种不同羟基含量的纳米氧化硅表面后熔点分别下降20和17 ℃. 而同一种纳米氧化硅(比表面积为640 m²·g^-1)在负载量小于50%时, 熔点下降明显; 进一步增大负载量, 熔点逐渐趋于本体. XRD和Raman光谱分析显示, 离子液体负载于氧化硅表面后其衍射峰或吸收峰相对强度发生明显改变. 分析负载前后纳米氧化硅的结构变化, 推断离子液体熔点下降的主要原因是离子液体分子与纳米氧化硅表面之间存在强烈的界面相互作用, 而表面羟基的密度及比表面积是影响负载后[EMIM][PF₆]离子液体相行为的主要因素.     

On the role of initiator in emulsion polymerization

The use of nonionic poly(ethylene glycol)-azo-initiators instead of ionic initiators in emulsion polymerizations offers interesting possibilities for modifying the colloidal and polymeric properties of polymer dispersions. Experimental results are presented for various kinds of anionic, cationic, and nonionic stabilizers as well as for peroxodisulfate initiators with different counter ions (ammonium and potassium). For example, in a styrene emulsion polymerization (with monomer to water mass ratio of 1:4 at a given concentration of 1% with respect to monomer mass of either an anionic or a cationic surfactant), the replacement of either peroxodisulfate or 2,2'-azobis(2-amidinopropane)dihydrochloride by a poly(ethylene glycol)-azo-initiator (with a poly(ethylene glycol) molecular weight of 200 g mol^-1) leads to particles with considerably smaller size, polymers with higher molecular weight, and latexes with higher viscosity.     

Novel antifouling oligo(ethylene glycol) methacrylate particles via surfactant-free emulsion polymerization

The use of particle formulations with antifouling surface properties attracts increasing interest in several biotechnological applications. Majority of these studies utilize a poly(ethylene glycol) coating to render the corresponding surface nonrecognizable to biological macromolecules. Herein, we report a simple way to prepare novel antifouling colloids composed of oligo(ethylene glycol) backbones via surfactant-free emulsion polymerization. Monodisperse cross-linked poly(ethylene glycol) ethyl ether methacrylate particles were characterized by dynamic light scattering and transmission electron microscopy. The effects of monomer, cross-linker and initiator on particle characteristics were investigated. More importantly, a prominent blockage of bovine serum albumin adsorption was obtained for the poly(ethylene glycol)-based sub-micron (~200 nm) particles when compared with similar-sized poly(methyl methacrylate) counterparts.     

Effect of water on the interfacial structures of room-temperature ionic liquids

The interfacial structures of cyano-based room-temperature ionic liquids play a very important role in reducing friction. However, the presence of water impairs their tribological performance. The interfacial structures and friction forces of 1-ethyl-3-methylimidazolium dicyanamide, [EMIM][DCN], and the effect of water on these structures and forces were investigated using atomic force microscopy. In addition, the interaction of water and [EMIM][DCN] was evaluated using Fourier-transform infrared (FT-IR) spectroscopy. Multiple repulsive layers were observed in the [EMIM][DCN] solution. This solution showed low friction force because these repulsive layers worked as protective layers against friction. On the other hand, the specific repulsive layer characteristics of [EMIM][DCN] could not be observed in a [EMIM][DCN] + 2 wt% H₂O solution. FT-IR results indicated that the layer structure of [EMIM][DCN] was disturbed by the addition of H₂O. Therefore, the solution containing water exhibited a high friction force.