首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
The facile synthesis of 3-miktoarm star polymers and 1st generation mikto polymeric dendrimers using atom transfer radical polymerization (ATRP) and "click" chemistry is demonstrated. ATRP was used to synthesize near uniform polymers with Br chain ends, which were easily converted into azido groups. These polymer chains were then attached to a trifunctional alkyne molecule (tripropargylamine) using click reactions in a variety of ways to make the miktoarm stars and miktoarm polymeric dendrimers.  相似文献   

2.
Polymer with pendant cinnamic ester and chloromethyl groups was synthesized by the addition reaction of poly(glycidyl methacrylate–co–methyl methacrylate) (PGMA) with cinnamoyl chloride. Also, polymers with pendant benzoic esters and chloromethyl groups were synthesized by reaction of PGMA with the corresponding benzoyl chlorides. Furthermore, polymers with cinnamic or benzoic esters and alkylazide groups were prepared by the substitution reaction of the obtained polymers with sodium azide.  相似文献   

3.
There are few existing methods for the quantitative functionalization of surfaces, especially for polymeric substrates. We demonstrate that alkyne end-functional diblock copolymers can be used to provide precise areal densities of reactive functionality on both hard (e.g., glass and silicon oxide) and soft (i.e., polymeric) substrates. Alkyne functionality is extremely versatile because the resultant functional surfaces are reactive toward azide functional molecules by Sharpless click chemistry. Spin-coated films of alpha-alkyne-omega-Br-poly( tert-butylacrylate- b-methylmethacrylate) (poly( tBA-MMA)) spontaneously self-assemble on the aforementioned substrates to present a surface monolayer of PtBA with a thickness in the range of 1 to 9 nm. The PMMA block physisorbs to provide multivalent anchoring onto hard substrates and is fixed onto polymer surfaces by interpenetration with the substrate polymer. The areal density of alkyne functional groups is precisely controlled by adjusting the thickness of the block copolymer monolayer, which is accomplished by changing either the spin coating conditions (i.e., rotational speed and solution concentration) or the copolymer molecular weight. The reactivity of surface-bound alkynes, in 1,3-dipolar cycloaddition reactions or by so-called "click chemistry", is demonstrated by covalent surface immobilization of fluorescently labeled azides. The modificed surfaces are characterized by atomic force microscopy (AFM), contact angle, ellipsometry, fluorescent imaging and angle-dependent X-ray photoelectron spectroscopy (ADXPS) measurements. Microarrays of covalently bound fluorescent molecules are created to demonstrate the approach and their performance is evaluated by determining their fluorescence signal-to-noise ratios.  相似文献   

4.
A range of well‐defined poly(glycidyl methacrylate) (PGMA) polymers and their corresponding block copolymers were synthesized via 2‐cyanoprop‐2‐yl(4‐fluoro) dithiobenzoate or CPFDB‐mediated ambient temperature reversible addition fragmentation chain transfer radical polymerization or RAFT polymerization under environmentally friendly visible light radiation (λ = 405–577 nm), using a (2,4,6‐trimethylbenzoyl) diphenylphosphine oxide photoinitiator. As comparison, CPFDB‐mediated ambient temperature RAFT polymerizations of glycidyl methacrylate (GMA) under both full‐wave radiation (λ = 254–577 nm) and long‐wave radiation (λ = 365–577 nm) were also studied in this article. The results indicated that CPFDB moieties were significantly photolyzed under either full‐wave radiation or long‐wave radiation, thus undermining the controlled behavior of these RAFT processes. Whereas this photolysis was significantly suppressed under visible light radiation, thus CPFDB functionalities exerted well control over RAFT process, leading to a remarkably living behavior up to 90% GMA monomer conversions. This strategy facilitates the facile synthesis of well‐defined PGMA polymers. More importantly, under visible light radiation, a relatively high initial molar ratio of GMA to CPFDB and TPO led to shortening initialization period of RAFT process and accelerating overall polymerization rate. These effects are remarkably in favor of the facile synthesis of well‐defined PGMA polymers and PGMA‐based copolymers with high molecular weights. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5091–5102, 2007  相似文献   

5.
Novozyme-435催化10-羟基癸酸进行自缩聚反应得到线性聚酯, 端基分别是羟基(—OH)和羧基(—COOH), 在三乙胺催化下, 分别用α-溴代丙酰溴和三甲基氯硅烷(TMSCL)进行端基官能化生成一个单官能度的大分子引发剂, 在CuCl/2,2'-联吡啶(bpy)催化体系中, 引发甲基丙烯酸环氧丙酯(GMA)的原子转移自由基反应(ATRP), 得到聚(10-羟基癸酸酯)/聚甲基丙烯酸环氧丙酯(PHDA-b-PGMA) AB 型两亲性嵌段共聚物, 其结构及分子量(分布)通过核磁共振和凝胶渗透色谱(GPC)确证. 此AB型两亲性嵌段共聚物在水溶液中能自组装形成纳米粒子, 用原子力显微镜(AFM)观察粒子的形状和大小.  相似文献   

6.
Surface modification of poly(tetrafluoroethylene) (PTFE) films by well-defined comb copolymer brushes was carried out. Peroxide initiators were generated directly on the PTFE film surface via radio frequency Ar plasma pretreatment, followed by air exposure. Poly(glycidyl methacrylate) (PGMA) brushes were first prepared by surface-initiated reversible addition-fragmentation chain transfer polymerization from the peroxide initiators on the PTFE surface in the presence of a chain transfer agent. Kinetics study revealed a linear increase in the graft concentration of PGMA with the reaction time, indicating that the chain growth from the surface was consistent with a "controlled" or "living" process. alpha-Bromoester moieties were attached to the grafted PGMA by reaction of the epoxide groups with 2-bromo-2-methylpropionic acid. The comb copolymer brushes were subsequently prepared via surface-initiated atom transfer radical polymerization of two hydrophilic vinyl monomers, including poly(ethylene glycol) methyl ether methacrylate and sodium salt of 4-styrenesulfonic acid. The chemical composition of the modified PTFE surfaces was characterized by X-ray photoelectron spectroscopy.  相似文献   

7.
We describe a versatile approach to synthesize glycosylated polyphosphazenes with controllable density of glycosyl groups. These glycopolymers have been synthesized by the nucleophilic substitution of poly(dichlorophosphazene) with propargylamine and subsequent “thiol–yne” click reaction between poly[di(propargylamine)phosphazene] and 2,3,4,6‐tetra‐O‐acetyl‐1‐thio‐β‐D ‐glucopyranose (SH‐GlcAc4). The polymers were characterized with FTIR and 1H NMR. We found that the high steric hindrance of SH‐GlcAc4 plays a key role in the overall reaction process, and ~55% of the alkyne groups participate in the “thiol–yne” click reaction. About 8% of the alkyne groups convert to alkene groups at the end of click reaction. The substitution of alkyne/alkane mixture was conducted to reduce the alkyne density in the side groups of polyphosphazenes and minimize the influences of this steric effect. Mixed‐substituent polyphosphazene was synthesized with 2:3 ratio of alkyne and alkane. In this case, almost no alkyne group remains after the “thiol–yne” click reaction, and thus the glycosylated polyphosphazene is able to form into micelles through self‐assembly process. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012  相似文献   

8.
Controlled grafting of well-defined epoxide polymer brushes on the hydrogen-terminated Si(100) substrates (Si-H substrates) was carried out via the surface-initiated atom-transfer radical polymerization (ATRP) at room temperature. Thus, glycidyl methacrylate (GMA) polymer brushes were prepared by ATRP from the alpha-bromoester functionalized Si-H surface. Kinetic studies revealed a linear increase in GMA polymer (PGMA) film thickness with reaction time, indicating that chain growth from the surface was a controlled "living" process. The graft polymerization proceeded more rapidly in the dimethylformamide/water (DMF/H(2)O) mixed solvent medium than in DMF, leading to much thicker PGMA growth on the silicon surface in the former medium. The chemical composition of the GMA graft-polymerized silicon (Si-g-PGMA) surfaces were characterized by X-ray photoelectron spectroscopy (XPS). The fact that the epoxide functional groups of the grafted PGMA were preserved quantitatively was revealed in the reaction with ethylenediamine. The "living" character of the PGMA chain end was further ascertained by the subsequent growth of a poly(pentafluorostyrene) (PFS) block from the Si-g-PGMA surface, using the PGMA brushes as the macroinitiators.  相似文献   

9.
The objective of this work was to synthesize a new type of dextran-based host polymer in which β-cyclodextrin (βCD) moieties are linked to the dextran backbone via flexible hydrophilic poly (ethylene glycol) (PEG) spacer. Short PEG-acrylate (Mn~375) was coupled with 5-hexynoic acid and grafted to the thiolated dextran using thiol-ene “click” chemistry. In the following step 6-monodeoxy-6-monoazido-βCD was “clicked” to the obtained alkyne terminated Dext-g-PEG copolymer (Dext-g-PEG-Hex-5-ynoate) using a copper (I)-catalyzed azide–alkyne cycloaddition. The reaction conditions and catalytic system were optimized. The synthesized Dext-g-PEG-βCD polymers have been characterized by 1H-NMR spectroscopy and isothermal titration microcalorimetry and they show good binding properties comparing with conventional cross-linked pβCD.  相似文献   

10.
Amphiphilic block copolymers composed of a hydrophilic poly(ethylene glycol) (PEG) block and a hydrophobic poly(glycidyl methacrylate) (PGMA) block were synthesized through cationic ring‐opening polymerization with PEG as the precursor. The model reactions indicated that the reactivity of the epoxy groups was higher than that of the double bonds in the bifunctional monomer glycidyl methacrylate (GMA) under the cationic polymerization conditions. Through the control of the reaction time in the synthesis of block copolymer PEG‐b‐PGMA, a linear GMA block was obtained through the ring‐opening polymerization of epoxy groups, whereas the double bond in GMA remained unreacted. The results showed that the molecular weight of the PEG precursor had little influence on the grafting of GMA, and the PGMA blocks almost kept the same length, despite the difference of the PEG blocks. In addition, the PGMA blocks only consisted of several GMA units. The obtained amphiphilic PEG‐b‐PGMA block copolymers could form polymeric core–shell micelles by direct molecular self‐assembly in water. The crosslinking of the PGMA core of the PEG‐b‐PGMA micelles, induced by ultraviolet radiation and heat instead of crosslinking agents, greatly increased the stability of the micelles. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2038–2047, 2005  相似文献   

11.
A facile click chemistry method of immobilizing surface‐functionalized polymer vesicles on casted polymeric PAN substrates is described. Microporous PAN membranes were subjected to hydrochloric acid hydrolysis to obtain surface carboxylates. The carboxylic groups were activated with EDC/NHS‐solution and were then reacted with propargylamine to introduce alkyne groups for CuAAC reactions. The alkyne functionality of the modified membrane surface was verified by reaction with an azide functional click dye both before and after the immobilization of azide‐functionalized ABA vesicles. The efficient postfunctionalization of the membrane with alkyne allowed quantitative coverage of the membrane surface with a polymersome monolayer, as confirmed by immobilization of polymerzomes loaded with a fluorescent dye. Polymersome monolayers immobilized on alkyne functionalized PAN‐membranes were characterized by cryo‐SEM and monolayers were confirmed by atom force microscopy. These methods opens up new avenues for preparing membrane based filtration and sensor technologies. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2032–2039  相似文献   

12.
Well‐defined star polymers consisting of tri‐, tetra‐, or octa‐arms have been prepared via coupling‐onto strategy using photoinduced copper(I)‐catalyzed 1,3‐dipolar cycloaddition click reaction. An azide end‐functionalized polystyrene and poly(methyl methacrylate), and an alkyne end‐functionalized poly(ε‐caprolactone) as the integrating arms of the star polymers are prepared by the combination of controlled polymerization and nucleophilic substitution reactions; whereas, multifunctional cores containing either azide or alkyne functionalities were synthesized in quantitatively via etherification and ring‐opening reactions. By using photoinduced copper‐catalyzed azide–alkyne cycloaddition (CuAAC) click reaction, reactive linear polymers are simply attached onto multifunctional cores to form corresponding star polymers via coupling‐onto methodology. The chromatographic, spectroscopic, and thermal analyses have clearly demonstrated that successful star formations can be obtained via photoinduced CuAAC click reaction. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1687–1695  相似文献   

13.
Macromolecular anchoring layer approach was used for preparation of an effective macroinitiator for the synthesis of grafted polymer layers by atom transfer radical polymerization (ATRP) initiated from the surface. For the initial surface modification, a thin layer of poly(glycidyl methacrylate) (PGMA) was deposited on the surface of a silicon wafer. The ATRP macroinitiator was synthesized on the substrate surface by the reaction between epoxy groups of PGMA and carboxy functionality of bromoacetic acid (BAA). Variation of the time and temperature of the BAA deposition as well as PGMA layer thickness allowed control over the amount of BAA attached to the surface. The PGMA anchoring layer allowed the achievement of initiator surface density significantly higher than that reported for a self-assembled monolayer of ATRP initiators. Polymer brushes were synthesized on the PGMA/BAA-modified substrates by ATRP. Different surface concentrations of BAA were used in our grafting experiments to acquire knowledge about the relationship between the amount of initiator anchored to the surface through PGMA and the rate of the grafted layer formation. The increase in the surface density of the initiating moieties led to the increase in the grafting rate. However, a cutoff initiator concentration beyond which no increase of the thickness of the grafted layer was observed. From comparison between the surface densities of the initiator and the attached polymer it was determined that the efficiency of the initiation from the surface was on the level of 5-15%.  相似文献   

14.
Novel monodisperse, non-porous, cross-linked poly (glycidyl methacrylate) beads (PGMA) were employed as the support for high performance affinity chromatography. Heparin was covalently attached to PGMA beads by three different coupling methods. Heparin-PGMA-I was prepared by directly coupling amino-groups of heparin with PGMA. Heparin-PGMA-II and III were prepared by the coupling of heparin to amino-PGMA, which was obtained by amination of PGMA. Heparin-PGMA-II was prepared by coupling the carboxyl groups of heparin to amino-PGMA by using water-soluble carbodiimide as coupling reagent, and heparin-PGMA-III was prepared by the reductive amination of heparin and amino-PGMA with sodium cyanoborohydride. The heparin contents of heparin-PGMA-I, II and III were 1.6, 10.2 and 1.0 mg/g beads, respectively. Their affinity capacities for antithrombin III were investigated. Their binding activity to antithrombin III was not proportional to the content of heparin immobilized, and heparin-PGMA-I was the most efficient affinity medium for antithrombin III. The resultant affinity media presented minimal non-specific interaction with other proteins and can be used in a wide pH range. All the three heparin-PGMA beads were exploited for the separation of antithrombin III from human plasma. The purity of antithrombin III obtained was higher than 90%, which was confirmed by high performance size exclusion chromatography.  相似文献   

15.
The synthesis of block copolymers via polymer conjugation of well‐defined building blocks offers excellent control over the structures obtained, but often several coupling strategies need to be explored to find an efficient one depending on the building blocks. To facilitate the synthesis of polymers with adjustable functional end‐groups for polymer conjugation, we report on the combination of activated ester chemistry with RAFT polymerization using a chain transfer agent (CTA) with a pentafluorophenyl ester (PFP‐CTA), which allows for flexible functionalization of either the CTA prior to polymerization or the obtained polymer after polymerization. Different polymethacrylates, namely PMMA, P(t‐BuMA) and PDEGMEMA, were synthesized with an alkyne‐CTA obtained from the aminolysis of the PFP‐CTA with propargylamine, and the successful incorporation of the alkyne moiety could be shown via 1H and 13C NMR spectroscopy and MALDI TOF MS. Further, the reactive α‐end‐groups of polymers synthesized using the unmodified PFP‐CTA could be converted into azide and alkyne end‐groups after polymerization, and the high functionalization efficiencies could be demonstrated via successful coupling of the resulting polymers via CuAAC. Thus, the PFP‐CTA allows for high combinatory flexibility in polymer synthesis facilitating polymer conjugation as useful method for the synthesis of block copolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010  相似文献   

16.
《European Polymer Journal》1985,21(4):415-419
Grafting of poly(glycidyl methacrylate) (PGMA) onto alginic acid was carried out using ceric ammonium nitrate as initiator, using various concentrations of monomer and initiator, and various temperatures and times. Percentage grafting, grafting efficiency and rates of polymerization, graft copolymerization and homopolymerization were evaluated in all cases. Infrared spectra for pure alginic acid, poly(glycidyl methacrylate) and the alginic acid-poly(glycidyl methacrylate) were taken to establish the occurrence of grafting. Differential scanning calorimetry was carried out for alginic acid, poly(glycidyl methacrylate), the graft copolymer and the physical mixture to establish evidence for grafting.  相似文献   

17.
Two complementary tandem strategies based on the one‐pot combination of click chemistry and atom transfer radical polymerization (ATRP) are studied. Initially, functionalized random copolymers are obtained by copolymerization of methyl methacrylate and propargyl methacrylate simultaneously to the click chemistry coupling of a monofunctional azide. Then, an approach based on the copolymerization of methyl methacrylate and 11‐azido‐undecanoyl methacrylate simultaneously to the click chemistry coupling of a monofunctional alkyne is also investigated. For both the approach, polymerization and click chemistry coupling are catalyzed by CuBr and bipyridine (Bipy) in diphenylether at 90 °C. The [Bipy]/[CuBr] ratio is varied from 2 to 25 and the ratio of functionalized comonomer from 20 to 70 mol %. Both the tandem strategies proceed with good yields (50–80%) and allow a good control over the characteristics of the resulting random copolymers and macromolecular brushes (Mn ~ 15,000–40,000 g/mol and PDI ~ 1.3–2.0) as well as quantitative click functionalization as characterized by 1H NMR and size exclusion chromatography analyses. Although the click process is generally completed at the early stage of the process, the rate of polymerization depends on the amount of bipyridine involved. It was found that extending most of the polymerization process out of the click reaction regime results in a better control of the polymerization, preventing the significant occurrence of side reactions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3803–3813, 2009  相似文献   

18.
The glycidyl azide polymers converted easily to glycidyl 1,2,3-triazolyl polymers by the click chemistry in good to high yields. These reactions are affected deeply by the electron effects. The electron donating groups made the reaction faster.  相似文献   

19.
Thermo‐responsive block‐graft fluoropolymer is synthesized and investigated the self‐assembly morphology and the tunable wettability surface on cotton fabric by dip‐coating into the micelles with different temperatures. Well‐defined block‐graft copolymer is prepared by click chemistry with poly(hexafluorobutyl methacrylate)‐block‐poly(glycidyl methacrylate) (PHFBMA‐b‐PGMA) and homopolymer poly(N‐isopropylacrylate) with alkyne on main chain (Alkynyl‐PNIPAM) to synthesize final block‐graft polymer PHFBMA‐b‐(PGMA‐g‐PNIPAM). The thermo‐responsive behaviors of block‐graft polymer prove that the diameter for fluoropolymer micelle is about 50–70 nm with uniform sphere shape at room temperature and bigger and broader at 40 °C. The surface of cotton fabric processed in micelle solution at room temperature is smooth and has good hydrophobic property, while it has the hydrophilic property dipped in high temperature micelle solution. This work may give valuable guidance for fabricating a facile strategy to establish controllable wettability surfaces on different substrates, which is a promising candidate for the coating materials and industrial fields. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 992–1002  相似文献   

20.
Homopolymers bearing terminal azide and alkyne groups can be coupled via click chemistry to yield diblock copolymers. When performed in solvents that dissolved both homopolymers, the click reaction was found in this study to be inefficient, probably due to the embedding of the reactive end groups inside the random coils of the polymers. The efficiency was only slightly affected by the addition of a small amount of water into the reaction mixture. However, the reaction efficiency increased dramatically near the water volume fraction where one or both of the reacting polymers began to precipitate. Further increases in water content caused the polymer(s) to undergo macroscopic phase separation and the click reaction efficiency decreased once again. A possible explanation for the observed effect of water on the polymer coupling reaction is proposed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号